Bonjour,
Je viens de découvrir qu'il existe, dans les dépôts debian-multimedia, un
paquet flashplayer-mozilla. J'utilise actuellement le flshplayer-nonfree
de l'archive officielle, qui « marche » mais fait horriblement ramer ma
machine.
Quelqu'un sait quelle est la différence entre les deux
Bonjour tout le monde,
Sur mon réseau, j'ai des problèmes persistants de
MTU qui se caractérisent par l'impossibilité de visiter certains sites
(en particulier des webmails) et de gros problèmes pour poster sur le
serveur de news de mon fournisseur d'accès.
Mon réseau :
- Le modem de mon ISP,
BM a écrit :
merci à toi et Geoffroy
j'ai suivi votre procédure
maintenant le networkadminstration reconnait ma carte
il ne me reste plus qu'a trouver une borne pour vérifier que tout
fonctionne correctement.
Philippe NIQUET a écrit :
mon portable possède une carte wifi intel golan 3945abg
Le dimanche 5 août 2007, Charles Plessy a écrit :
Bonjour tout le monde,
Sur mon réseau, j'ai des problèmes persistants de
MTU qui se caractérisent par l'impossibilité de visiter certains sites
(en particulier des webmails) et de gros problèmes pour poster sur le
serveur de news de mon
mon écran de portable est de type wide avec une résolution de 1280x800
or à l'installation etch l'a configuré en 1024x768
j'ai voulu reconfigurer avec dpkg-reconfigure xserver-xorg mais je ne
trouve pas la carte graphique (Intel945gm) dans la liste . on me propose
i810 ( de mémoire)
question 1
Salut,
Alex PADOLY a écrit :
Bonjour à tous,
J'ai essayé d'installer le paquet cdrecord et le srcipt me renvoie qu'il
y a plusieurs paquets dont les dépendances ne sont pas satisfaites
Mais encore ? Quel est le message d'erreur complet ?
Depuis ma première installation de Sarge, j'ai fait
Le dimanche 05 août 2007 à 10:49 +0200, Philippe NIQUET a écrit :
mon écran de portable est de type wide avec une résolution de 1280x800
or à l'installation etch l'a configuré en 1024x768
j'ai voulu reconfigurer avec dpkg-reconfigure xserver-xorg mais je ne
trouve pas la carte graphique
Bonjour,
Le dimanche 05 août 2007, Charles Plessy a écrit...
Je voudrais attaquer le mal a la racine, mais je ne sais pas très bien
ou chercher. Y a-t-il un changement sur la passerelle qui permettrait a
tous les ordinateurs du réseau wifi de fonctionner sans avoir a
tripatouiller
On Sun, Aug 05, 2007 at 04:30:32PM +0900, Charles Plessy wrote:
Bonjour tout le monde,
Sur mon réseau, j'ai des problèmes persistants de
MTU qui se caractérisent par l'impossibilité de visiter certains sites
(en particulier des webmails) et de gros problèmes pour poster sur le
serveur de
Le dimanche 05 août 2007 11:14, Jean-Michel OLTRA a écrit :
Bonjour,
Bonjour,
Quelqu'un de la liste a eu un problème similaire (mais ce n'est pas sur
cette liste ci) : Serge Cavailles. Il doit lire duf, mais tu peux lui
poster ton message en doublon en privé (dis lui que ça vient de moi,
Salut,
Charles Plessy a écrit :
Sur mon réseau, j'ai des problèmes persistants de
MTU qui se caractérisent par l'impossibilité de visiter certains sites
(en particulier des webmails) et de gros problèmes pour poster sur le
serveur de news de mon fournisseur d'accès.
Mon réseau :
- Le
Bonjour,
Le dimanche 05 août 2007, Pascal Hambourg a écrit...
Il y a une parade classique mais qui ne marche que pour les communications
TCP, qui consiste à trafiquer la valeur de l'option MSS (maximum segment
size) des paquets SYN et SYN/ACK avec iptables.
iptables -t mangle
Jean-Michel OLTRA a écrit :
iptables -t mangle -A FORWARD -p tcp -m tcp --tcp-flags SYN,RST SYN \
-j TCPMSS --clamp-mss-to-pmtu
[...]
J'avais fait qqch similaire à une époque, pour régler un problème sur
les envois de pièces jointes : j'avais fixé le mss avec iptables (sur
les
On Sun, Aug 05, 2007 at 04:30:32PM +0900, Charles Plessy wrote:
Mon réseau :
- Le modem de mon ISP, connecté par pppoe a
- ma passerelle sous Etch, connectée par ethernet a
- un hub 5 ports, connecté par ethernet a
- une borne Airport extreme, connecté par les airs a
- mon linux et le
Le dimanche 5 août 2007 11:14, Christophe Alonso a écrit :
En principe ça peut marcher, oui.
Sinon voir du côté du paquet 915resolution
je crois que 915resolution est intégré à xorg7.x (plus besoin de l'installer)
Le dimanche 05 août 2007 11:23, Serge Cavailles a écrit :
La solution mise en oeuvre ne répond pas à la question posée, ça a
consisté chez moi à modifier le MTU sur chaque poste client.
Rectificatif, il avait aussi fallu modifier sur la passerelle, à 1492
partout.
Ce que je ne comprends pas,
Bonsoir à tous;
J'ai un graveur de dvd qui, jusqu'à présent, gravait bravement mes cd et
dvd, mais j'ai l'impression que depuis mon changement de noyau (2.6.21-5 à
présent, avec patch suspend2 et version mercurial de v4l), la gravure est
impossible!
Mes option dans grub: 'noapic hdc=ide-scsi
Suinot Rémi, dimanche 5 août 2007, 18:34:47 CEST
Bonsoir à tous;
’soir,
J'ai un graveur de dvd qui, jusqu'à présent, gravait bravement mes cd et
dvd, mais j'ai l'impression que depuis mon changement de noyau (2.6.21-5 à
présent, avec patch suspend2 et version mercurial de v4l), la gravure
Bulot Grégory a écrit :
Le dimanche 5 août 2007 11:14, Christophe Alonso a écrit :
En principe ça peut marcher, oui.
Sinon voir du côté du paquet 915resolution
je crois que 915resolution est intégré à xorg7.x (plus besoin de l'installer)
c'est exactement ce que je
Salut à tous
je suis en train de mettre en place un serveur syslog-ng qui sera à
l'écoute de mon réseau.
j'ai donc créer dans mon fichier de config les paramètres suivants (ce
n'est qu'un extrait):
owner(syslog);
group(syslog);
perm(0640);
[...]
source src-reseau
{
OoO Pendant le repas du dimanche 05 août 2007, vers 19:42, Thibaut LE
LEVIER [EMAIL PROTECTED] disait:
tout fonctionne bien au niveau des logs, mais je me retrouve face à un
problème de droits pour y accéder (via un serveur ftp)
les dossier et les fichiers sont créé avec les droits pour
Vincent Bernat wrote:
OoO Pendant le repas du dimanche 05 août 2007, vers 19:42, Thibaut LE
LEVIER [EMAIL PROTECTED] disait:
tout fonctionne bien au niveau des logs, mais je me retrouve face à un
problème de droits pour y accéder (via un serveur ftp)
les dossier et les fichiers sont créé
Suinot Rémi, dimanche 5 août 2007, 18:34:47 CEST
Mes option dans grub: 'noapic hdc=ide-scsi max_scsi_luns=1'
Ouh là , ça fait belle lurette que lâoption ide-scsi nâest plus
utile pour la gravure (elle posait même plus de problème quâelle
nâen résolvait sur les 2.6).
El dom, 05-08-2007 a las 00:40 +0200, Iñaki Baz Castillo escribió:
El Sábado, 4 de Agosto de 2007, Jose Luis Rivas Contreras escribió:
consultores1 wrote:
Si, ya habia pensado en eso; pero cada vez que arranca un Debian te
manda a un log la informacion de los arranques. Que tal si en vez
On 8/5/07, Constructora Pando [EMAIL PROTECTED] wrote:
On 8/5/07, Constructora Pando [EMAIL PROTECTED] wrote:
No se que paso, pues no había instalado ningún paquete (estaba
trabajando sin convección a internet), como usuario normal y solo
estaba imprimiendo... un archivo doc abierto con
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hola a todos.
Creo que lo que voy a preguntar ya se ha hablado en la lista, pero es
que encuentro el hilo en los archivos. Así que, mis disculpas.
Creo que existe un interfaz web para configurar iptables. ¿Cierto?. Lo
que no recuerdo es como se
El 5/08/07, Constructora Pando [EMAIL PROTECTED] escribió:
No se que paso, pues no había instalado ningún paquete (estaba
trabajando sin convección a internet), como usuario normal y solo
estaba imprimiendo... un archivo doc abierto con openoffice colgó el
sistema al reiniciar ya no entra
El 5/08/07, Pablo Braulio [EMAIL PROTECTED] escribió:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hola a todos.
Creo que lo que voy a preguntar ya se ha hablado en la lista, pero es
que encuentro el hilo en los archivos. Así que, mis disculpas.
Creo que existe un interfaz web para
Uso Debian lenny 386, con KDE en un laptop Acer 3690
Con Debian nunca me paso tal cual lo que comentas, con Suse, Mandrake,
y RedHat me pasaba siempre, cosas parecidas si, pero generalmente
siempre era el mismo problema la particion del /home la tenia usada al
100%.-
Aparte vos mismo te estas
he cambiado de pc y tengo un problema, tengo una linea de telefono del cual
se bifurca en un cable para el modem y otro para el telefono, antes por mas
que la pc estaba apagada o encendida igual tenia tono... ahora por el solo
hecho de conectar el cable al modem el telefono se muere... todavia no
Hola, si no me equivoco lo que andan buscando es Shorewall, la pagina
es: www.shorewall.net
Saludos!
El 5/08/07, Gonzalo Rivero [EMAIL PROTECTED] escribió:
El 5/08/07, Pablo Braulio [EMAIL PROTECTED] escribió:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hola a todos.
Creo que lo
Hola, me acorde recien tambien de Firestarter, la pagina es: www.fs-security.com
Saludos nuevamente!
El 5/08/07, Gonzalo Rivero [EMAIL PROTECTED] escribió:
El 5/08/07, Pablo Braulio [EMAIL PROTECTED] escribió:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hola a todos.
Creo que lo
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Emiliano Piscitelli escribió:
Hola, me acorde recien tambien de Firestarter, la pagina es:
www.fs-security.com
Hola.
He visto Firestarter en los repositorios de debian. Pero creo que es una
inferfaz gtk. ¿Me equivoco?.
De lo que se trata es
Saludos,
Creo que existe un interfaz web para configurar iptables. ¿Cierto?. Lo
que no recuerdo es como se llama.
Estoy buscando un interfaz para configurar y otro para los logs.
Yo he usado Turtle Firewall [1] cómo módulo de Webmin para
administración via web de un firewall y es bastante
Tomas Zulberti escribió:
On 7/30/07, Tonny [EMAIL PROTECTED] wrote:
Guillermo Salas M. escribió:
On Mon, 2007-07-30 at 12:36 -0400, Max Ramirez wrote:
Yo alguna vez lo tuve corriendo con sarge. Basicamente es una maquina
virtual que permite correr ese sistema operativo sin tener que
tenerlo
Dispongo de una conexión a internet por cable modem (Telecentro -
Argentina) he notado que ultimamente la descarga desde repositorios no
supera nunga los 15 kb/s.
He probado http://ftp.[br|es|fr|fi].debian.org/debian/ siempre de la
rama etch y me sucede eso, tambien en los repositorios de
Buenas buenas,
He compilado la version 0.45 de Inkscape sin problemas, resulta que se instaló
en el sistema en inglés, qué necesito para cambiar el idioma a español? Saludos.
Marcel Caraballo wrote:
Buenas buenas,
He compilado la version 0.45 de Inkscape sin problemas, resulta que se
instaló en el sistema en inglés, qué necesito para cambiar el idioma a
español? Saludos.
Puedo preguntar: ¿Porque lo compilaste? Podías instalarlo con:
# aptitude install inkscape
Maximiliano Alvisto De Leon wrote:
Dispongo de una conexión a internet por cable modem (Telecentro -
Argentina) he notado que ultimamente la descarga desde repositorios no
supera nunga los 15 kb/s.
He probado http://ftp.[br|es|fr|fi].debian.org/debian/ siempre de la
rama etch y me sucede eso,
On Sun, 05 Aug 2007 23:36:56 -0400
Jose Luis Rivas Contreras [EMAIL PROTECTED] wrote:
Marcel Caraballo wrote:
Buenas buenas,
He compilado la version 0.45 de Inkscape sin problemas, resulta que se
instaló en el sistema en inglés, qué necesito para cambiar el idioma a
español?
Marcel Caraballo wrote:
Saludos José,
Lo he compilado porque el paquete de Debian es el 0.44 y no me da la opción
de blur (una maravilla), anteriormente lo había compilado y el idioma era
español por defecto como comentas. Ahora, no tengo idea de por qué esta vez
me lo dejó en inglés
On 8/5/07, hector hector [EMAIL PROTECTED] wrote:
Uso Debian lenny 386, con KDE en un laptop Acer 3690
Con Debian nunca me paso tal cual lo que comentas, con Suse, Mandrake,
y RedHat me pasaba siempre, cosas parecidas si, pero generalmente
siempre era el mismo problema la particion del /home
Márcio,
Passo por isto e ainda não sei como resolver. Não tive tempo de mexer no
servidor.
Na verdade o que acontece é que após um apt-get install sarg ele instala
alguns scripts no contrab. Em especial cron.daily, cron.weekly e
cron.monthly com o nome de sarg. Estes scripts é que estão
Em Sat, 4 Aug 2007 13:37:15 -0300 (ART)
Ricardo Arias Brito [EMAIL PROTECTED] escreveu:
mkdir: não é possível criar o diretório
`/home/ric/.local/share/desktop-directories': Permissão negada
Pelo jeito não existe permissão para mexer no
diretório /home/usuário/.local
Na minha máquina o
Sáb, 2007-08-04 às 22:34 -0300, jefferson alexandre escreveu:
On 8/4/07, Felipe Augusto van de Wiel (faw) [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04-08-2007 13:18, Jose Paulo Matafome Oleiro wrote:
Sáb, 2007-08-04 às 16:43 +0100, Jose Paulo Matafome
Boa Noite,
Acabo de Instalar o Kurumin 6 e estou com um problema na instalação do
amsn atraves do apt-get.
segue abaixo o log da tentativa de instalação com a mensagem de erro.
Já tentei mudar os repositorios do sources.list e não resolveu.
Desde já agradeço!
Eduardo Batista
[EMAIL
Caros,
Fiz uma lenha sem tamanho no meu desktop, apaguei por engano todo meu
diretorio /etc. Existe alguma possibilidade de conseguir recupera-lo?
Att.
--
Leandro Moreira
Linux Networking
Telefone: +55 (32) 9197-7909
E-mail/MSN: [EMAIL PROTECTED]
www.leandromoreira.eti.br
--
To
Este problema acontece quando o servidor não tem um
reverso configurado. E vc deve ter regras
restrictions em seu main.cf que estão bloqueando
ele.
O reverso dele que não deve estar OK, vc entendeu ?
A mesma coisa acontece com o terra, se vc não tiver o
seu reverso OK, vc não consegue enviar
Então, este HD esta assim:
A raiz não esta mais na raiz, onde o barra / foi para /mnt/.
Então todo OS antigo esta em /mnt/
A minha pergunta tem como configurar o GRUB para montar apatir do /mnt/?
Em 02/08/07, Davi[EMAIL PROTECTED] escreveu:
Em Quinta 02 Agosto 2007 11:16, Adriano Maverick
Em Domingo 05 Agosto 2007 14:40, Adriano Maverick escreveu:
Em 02/08/07, Davi[EMAIL PROTECTED] escreveu:
Em Quinta 02 Agosto 2007 11:16, Adriano Maverick escreveu:
Estou com um problema, tinha um servidor com Debian 3.1, foi feito um
backup (imagem) do HD dele e foi colocado em outro HD,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Olá Eduardo,
On 04-08-2007 23:12, eduardo wrote:
Boa Noite,
Acabo de Instalar o Kurumin 6 e estou com um problema na instalação do
amsn atraves do apt-get.
Antes de mais nada, Kurumin não é Debian, recomendo que
você verifique mais
bir zamanlar açık kaynak bir web tarayıcısı vardı. o zamanlar şeytanın korku
salan browseri ie karşısında kahramanca savaşıyordu ama takipçileri bir avuç
elit açık kaynak fanatiği idi. internet explorer , o dönemlerde adres
satırına about:mozilla yazıldığında mavi ekran hatasıyla dalga geçmek
is because there is a penalty for executing 32-bit code, one which is
There is none (if you use the 32bit subset of the AMD64 architecture).
But there is a penalty for using the x86 architecture instead of the
amd64 architecture.
This penalty is not specific to the Athlon64/Opteron/younameit,
Andrew J. Barr wrote:
Ron Johnson wrote:
Andrew J. Barr wrote:
Yes. Unlike true 64-bit architectures like PowerPC, there is a penalty
for executing 32 bit code on amd64/em64t processors.
Most certainly incorrect. In fact natively compiled AMD64 64-bit
compiled code *may* run faster due
On Sun, Aug 05, 2007 at 01:33:14PM +0900, Takehiko Abe wrote:
Andrew Sackville-West wrote:
Since I updated xserver-xorg-video-intel, my LCD started to complain
that it is in a non-preset mode, that is, the monitor displayed a
message Nonpreset Mode for 5 seconds when X started.
does
Posted this to Debian-KDE list without reply. Hope to get some ideas here.
Posting through IceDove.
Using Debian Etch/Lenny
Have just been connected to satellite internet provider Clearnetworks who
have some Linux capable techs on their staff, but have not been able to
resolve a problem with
On Sun, Aug 05, 2007 at 05:12:02PM +1000, Charlie wrote:
Posted this to Debian-KDE list without reply. Hope to get some ideas here.
Posting through IceDove.
Does this mean IceDove works?
Sending failed:
Message sending failed since the following recipients were rejected by
the server:
Hi all,
I have been playing with xrandr to get multi monitor support working on
my intel i915 mobile card. I running unstable.
It works ok, except the primary monitor gets set to the external vga
screen!
How can I get the primary display to be the laptop panel and the
secondary display to be
Andrei Popescu wrote:
On Sun, Aug 05, 2007 at 05:12:02PM +1000, Charlie wrote:
Posted this to Debian-KDE list without reply. Hope to get some ideas here.
Posting through IceDove.
Does this mean IceDove works?
Sending failed:
Message sending failed since the following recipients
On Sun, Aug 05, 2007 at 05:17:17PM +0930, David Purton wrote:
Hi all,
I have been playing with xrandr to get multi monitor support working on
my intel i915 mobile card. I running unstable.
It works ok, except the primary monitor gets set to the external vga
screen!
How can I get the
On Sun, Aug 05, 2007 at 06:12:56PM +1000, Charlie wrote:
Posting through IceDove.
Does this mean IceDove works?
Sending failed:
Message sending failed since the following recipients were rejected by
the server:
[EMAIL PROTECTED] (The server responded: relaying mail to
^^^
Andrei Popescu wrote:
On Sun, Aug 05, 2007 at 06:12:56PM +1000, Charlie wrote:
Posting through IceDove.
Does this mean IceDove works?
Sending failed:
Message sending failed since the following recipients were rejected by
the server:
[EMAIL PROTECTED] (The server
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Dear users,
since i moved from 2.6.18 to 2.6.22 my wlan interface stopped working.
At boot-time my hotplug system (no udev is installed! - because this
is not wanted) detects the ipw2100 card and tries to load the ipw2100
module. this task is
Wayne Topa wrote:
I have been using an old laptop as an Access Point for our laptops to
connect to the internet through the main box - modem connection.
The Lan (eth0) is bridged with a Netgear WG511U PCMCIA card (ath0) to
connect to the gatway computer.
It works fine, as an AP, but has one
On 8/4/2007 6:06 PM, Tong Sun wrote:
Package: less
Version: 394-4
Severity: wishlist
I remember that I used to be able to exit 'less' by command key 'x' or
something so that the content just viewed is left on screen, instead of
being cleared and restored to the screen before invoking
Keep the reply on the list please.
On Sun, Aug 05, 2007 at 02:44:45PM +1200, Jeff wrote:
Douglas Allan Tutty wrote:
Another way to get into the box is to boot the install CD in rescue
mode. From the menus, you can get a shell that is chrooted into the
box. From there, you can either edit
I left my machine on overnight ( I usually don't ) and got these
messages in my mail this morning:
From: [EMAIL PROTECTED] (Cron Daemon)
To: [EMAIL PROTECTED]
Subject: Cron [EMAIL PROTECTED] sudo aptitude update
Date: Sun, 05 Aug 2007 05:10:01 -0400
Hit ftp://gulus.usherbrooke.ca sid
On Sunday 05 August 2007 02:12, Charlie wrote:
Posted this to Debian-KDE list without reply. Hope to get some ideas here.
Posting through IceDove.
Using Debian Etch/Lenny
Have just been connected to satellite internet provider Clearnetworks who
have some Linux capable techs on their staff,
The request
(post to rally-l)
must be confirmed by
[EMAIL PROTECTED]
and approved by the moderators. Confirmation instructions have been
mailed in a separate message.
---BeginMessage---
The message was not delivered due to the following reason:
Your message was not delivered because the
Andrew J. Barr wrote:
The file /var/log/Xorg.0.log would help with diagnostics.
only if I know how to interpret it...
There are in total 10 entries marked 'EE', all identical:
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
Is this normal? ... OK, silly question. Errors
On Sun, Aug 05, 2007 at 12:28:14AM -0600, Bob Proulx wrote:
But even so there was huge resistance because it was not a perfect
solution and did not support 32-bit applications out of the box.
I run Etch amd64 on may Athlon64 3800+ and its great. Then again, this box
was an upgrade from my
I would like to see how VirtualBox stands up against the others. It seems to
be the fastest emulator when it comes to Windows. Although this is only one
person's opinion and there is no scientific evidence it just feels faster.
-Tom
VB runs great here. I'm virtualizing Arch, Fedora
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi. Up to date Sid, 2.6.22
The dvgrab program is trying to access /dev/raw1394, to pull data from
my video camera (as if that wasn't implicit already).
Funny thing is, /dev/raw1394 doesn't exist.
I'm accustomed to having to fix permissions on it
On Sun, Aug 05, 2007 at 08:54:52AM -0400, Douglas Allan Tutty wrote:
On 8/4/2007 6:06 PM, Tong Sun wrote:
Package: less
Version: 394-4
Severity: wishlist
I remember that I used to be able to exit 'less' by command key 'x' or
something so that the content just viewed is left on
On Sun, Aug 05, 2007 at 09:26:28AM -0400, Frank McCormick wrote:
I left my machine on overnight ( I usually don't ) and got these
messages in my mail this morning:
You mean that you don't run anacron when you don't leave the compuer on
overnight? There are _lots_ of default scripts in
On Sunday 05 August 2007 16:23:12 B.Hoffmann wrote:
I would like to see how VirtualBox stands up against the others. It
seems to be the fastest emulator when it comes to Windows. Although this
is only one person's opinion and there is no scientific evidence it
just feels faster.
-Tom
This problem has been solved, as least in a practical sense.
Repeated tries to install Etch had resulted in the boot failing as soon as
grub was called. Attempts to build a system with lilo also failed. The
motherboard (Abit BX133 440BX) has four IDE connectors, allowing 8 drives in
total. My
Dear all,
The following is the cat message from /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.00GHz
stepping: 3
cpu MHz : 2800.220
cache size : 16 KB
My present kernel is
And what error messages had you got when the system failed to boot with 2.6.8
smp kernel?
They are important in order to determine the boot failed reason.
Regards
On Sunday 05 August 2007 17:40, Kun Niu wrote:
Dear all,
The following is the cat message from /proc/cpuinfo
processor : 0
Package: less
Version: 394-4
Severity: wishlist
I remember that I used to be able to exit 'less' by command key 'x' or
something so that the content just viewed is left on screen, instead of
being cleared and restored to the screen before invoking 'less'. But I
found there is no such capability
Hello,
I am trying to find a method to make an mpeg movie from a number of avi
files captured from a digital camera (Canon A540). Any suggestions what
steps to follow? The original videos are at 15 fps and I am not too
concerned about the output fps. However, if I wanted a DVD from the avi
files,
Thank you for your reply.
I'm sorry that the machine is really far from my reach.
And I asked someone who was not familiar with linux restart my server
and choose my original kernel for me.
I wonder if the 686 kernel of 2.6.18 is the right one for me.
Thanks again for your reply.
2007/8/6,
On 08/05/2007 10:00 AM, Douglas Allan Tutty wrote:
On Sun, Aug 05, 2007 at 08:54:52AM -0400, Douglas Allan Tutty wrote:
[...]
In any event, less(1) doesn't show a command key 'x' that I can see.
I just tried man in xfce-terminal and find that q does clear the screen.
How unhelpful; another
I think your CPU is perfectly suported by 2.6.8 smp kernel.
So, it is possible that the boot problem is caused by any other problem (i.e.
your 2.6.8 smp kernel has not built in support for your root filesystem).
For example, if your root filesystem is ext3 and your kernel has compiled ext3
On Sun, 2007-08-05 at 12:12 +1200, Jeff wrote:
I am a new Debian user . Had Etch installed and tried to install the
Nvidia driver without success. Now i cannot get the display working when
i boot Etch ! Just a blank screen? Can someone tell me how to get the
display back from boot up
On Sat, 2007-08-04 at 20:02 -0400, Andrew J. Barr wrote:
On 8/4/07, Ross Boylan [EMAIL PROTECTED] wrote:
I enabled Personal File Sharing on an iMac on my LAN, but can't seem
to see the files from KDE. I have a pretty full installation of KDE
(testing), including kdnssd, and I have avahi
n Sun, 05 Aug 2007 11:53:35 -0400, Tong Sun wrote:
Package: less
Version: 394-4
Severity: wishlist
Sorry, this is a dup of Bug#436057, wrongly sent twice.
I don't know how to close it.
thanks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
On Sun, Aug 05, 2007 at 11:24:46PM +0900, Takehiko Abe wrote:
Andrew J. Barr wrote:
The file /var/log/Xorg.0.log would help with diagnostics.
only if I know how to interpret it...
There are in total 10 entries marked 'EE', all identical:
(EE) intel(0): Unable to write to SDVOCTRL_E for
Greetings:
This has to be in a FAQ somewhere but I just can't find it. When I try
to play a dvd with xine, it says it cannot play encrypted disks. I
have installed libdvdcss2 and it works fine for playing dvds with
mplayer, but xine still refuses.
I am using mplayer and xine from stable, and
I have a PDF with a whole bunch of internal links. Many of them are simple
page links, and work just fine in xpdf. Some did not work in xpdf, however,
and upon investigation with Adobe Acrobat Professional I determined that
they are JavaScript links that run this.pageNum=N where N is the page
On Sun, 05 Aug 2007 01:55:13 +, Andy Smith wrote:
On Sat, Aug 04, 2007 at 09:06:19PM -0400, Tong Sun wrote:
I remember that I used to be able to exit 'less' by command key 'x' or
something so that the content just viewed is left on screen, instead of
being cleared and restored to the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 08/05/07 11:12, H.S. wrote:
Hello,
I am trying to find a method to make an mpeg movie from a number of avi
files captured from a digital camera (Canon A540). Any suggestions what
steps to follow? The original videos are at 15 fps and I am not
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 08/05/07 12:14, Mark Zimmerman wrote:
Greetings:
This has to be in a FAQ somewhere but I just can't find it. When I try
to play a dvd with xine, it says it cannot play encrypted disks. I
have installed libdvdcss2 and it works fine for playing
Is there a replacement for apt-listchanges, not written in python?
--
Vincent Lefèvre [EMAIL PROTECTED] - Web: http://www.vinc17.org/
100% accessible validated (X)HTML - Blog: http://www.vinc17.org/blog/
Work: CR INRIA - computer arithmetic / Arenaire project (LIP, ENS-Lyon)
--
To
On Sun, Aug 05, 2007 at 09:26:28AM -0400, Frank McCormick wrote:
I left my machine on overnight ( I usually don't ) and got these
messages in my mail this morning:
You probably have cron-apt installed.
Regards,
Andrei
--
If you can't explain it simply, you don't understand it well enough.
On Sun, Aug 05, 2007 at 12:56:55PM -0400, Tong Sun wrote:
n Sun, 05 Aug 2007 11:53:35 -0400, Tong Sun wrote:
Package: less
Version: 394-4
Severity: wishlist
Sorry, this is a dup of Bug#436057, wrongly sent twice.
I don't know how to close it.
You can close a bug by sending a mail to
Hi Vincent.
Vincent Lefevre, 05.08.2007 20:36:
Is there a replacement for apt-listchanges, not written in python?
Not that I knew of. What’s the problem with apt-listchanges written in Python?
Regards, Mathias
--
debian/rules
signature.asc
Description: OpenPGP digital signature
I hope to place a PC running Etch in our small (tiny, actually)
airport building for use by pilots. The PC will be used to access
perhaps 10 web sites (plus or minus) over a DSL connection and to run
a few utilities to show GMT and a calculator and maybe a few
additional applications. The box will
On 8/5/07, Dave Walker [EMAIL PROTECTED] wrote:
I hope to make the PC reasonably idiot proof (the box will be kept
separate from the users) - the keyboard and display will be
accessible. The goal is to keep users from inadvertently trashing the
machine, but to provide usability.
Sabayon
On Friday 13 July 2007 11:50, Brad Rogers wrote:
On Fri, 13 Jul 2007 17:42:12 +0200
Mirco Piccin [EMAIL PROTECTED] wrote:
Hello Mirco,
All seems well here, with the -k7 version. Are you using the -686,
by any chance?
I'm using 2.6.21-2-686 with no problems.
I recall a guy asking
1 - 100 of 122 matches
Mail list logo
