Hola:
En un servidor Wheezy si connecten usuaris que necessiten fer sessions
gràfiques.
Fins ara era tight. Les feiem via ssh. Les aixecavem:
tightvncserver :3 -name golf -depth 24 -geometry 1564x850
I remotament es connectaven:
xtightvncviewer -via externa.com :3
Anava tot pel localhost del
Bonjour,
je suis dans une phase de réflexion pour mettre en place un cluster de
type proxmox.
Mais j'ai des moyens limités et donc pas possible d'avoir un NAS.
Donc je pense à utiliser deux serveurs sistership avec sur chaque une
grappe de disque en RAID5 soft (pour le hard, c'est à cause du
Le 08/09/2013 15:53, Yann Cohen a écrit :
Bonjour,
je suis dans une phase de réflexion pour mettre en place un cluster de
type proxmox.
Mais j'ai des moyens limités et donc pas possible d'avoir un NAS.
Donc je pense à utiliser deux serveurs sistership avec sur chaque une
grappe de disque en
Le 08/09/2013 15:53, Yann Cohen a écrit :
Bonjour,
je suis dans une phase de réflexion pour mettre en place un cluster de
type proxmox.
Mais j'ai des moyens limités et donc pas possible d'avoir un NAS.
Donc je pense à utiliser deux serveurs sistership avec sur chaque une
grappe de disque en
Bonjour,
depuis une mise à jour, je n'arrive plus à me connecter sur un
périphérique audio bluetooth.
J'ai ajouté Enable=Socket dans le /etc/bluetooth/audio.conf
J'arrive bien à avoir la connexion avec le périphique en bluetooth, mais
pas la connexion a pulseaudio.
Le dernier message de ssy
Salut,
Yves Rutschle a écrit :
Comme je ne crois pas que la librairie de resolution
cache les résultats venant de /etc/hosts
Pas plus qu'elle ne met en cache le résultat des requêtes DNS. En
revanche le noyau met en mémoire cache le contenu des fichiers lus.
--
Lisez la FAQ de la liste
Dominique Asselineau a écrit :
Je croyais qu'il n'était pas bon d'utiliser 127.0.0.1 pour autre chose
que localhost.
Ça peut avoir des effets de bord imprévus. Exemple vu récemment : un
serveur FTP derrière un NAT, configuré pour annoncer l'adresse IP
passive résolue à partir du nom de
Bonjour,
Et désolé de ne pas être très réactif.
Sylvain L. Sauvage wrote on Fri, Sep 06, 2013 at 02:11:44PM +0200
Le vendredi 6 septembre 2013 13:24:58 Dominique Asselineau a
écrit :
[???]
C'est un netbook, il ne l'est donc pas tout le temps. Et puis
ce n'est pas [c]ensé être une IP
Salut,
Pour la phase de déploiement :
- Mise en place du système RAID5 (depuis install Debian)
- Mise en place du LVM (depuis install Debian)
- Mise en place de DRBD
- Mise en place de Pacemaker (check HA sur ton drbd)
J'ai mis en place cette config hors Proxmox je n'ai jamais touché a
Le 08/09/2013 15:53, Yann Cohen a écrit :
Bonjour,
je suis dans une phase de réflexion pour mettre en place un cluster de
type proxmox.
Mais j'ai des moyens limités et donc pas possible d'avoir un NAS.
Donc je pense à utiliser deux serveurs sistership avec sur chaque une
grappe de disque en
Bonjour,
J'utilise la distribution debian, (wheezy) sur une Raspberry pi.
j'expérimente un petit serveur http, Flask.
Quelqu'un sait il ou trouver l'historique des connexions http sur le
serveur, je fouille mais pour le moment je fais choux blanc.
Merci d'avance.
--
Lisez la FAQ de la liste
Bonjour,
Je suis à la recherche d'un outil de gestion de parc de matériel.
Ces matériels sont très peu informatiques (extincteurs, transpalette, fenwick...) mais ils
ont besoins d'un suivit régulier ainsi qu'un historique des pannes, maintenances, et
autres interventions ainsi que des alerte
Salut,
Oui GLPI et Fusion Inventory
Dans le cas ou un agent ne peut être installer sur le matériel ca
revient quand meme à tout faire à la main ou via tableur ;)
http://www.glpi-project.org/
http://www.fusioninventory.org/
J'ai déployé pour un parc de 80 users et 80 serveurs environ
Le
Salut,
En fait y a rien de spécifique à Proxmox, mettre en place LVM et DRBD au
final c'est lié du tout à Proxmox. La doc est tout de même utile mais ca
reste un environnement Debian ou autre.
Donc oui DRBD et LVM ca fonctionne très bien et y a un tas de docs
partout sur le web.
Le
Je viens de mettre en place un RAID HARD avec un HP Proliant ML350G, je suis
pourtant débutant sur de vrais serveurs, j'ai pas trouver ça compliqué. Si tu
veux, je pourrais te donner le type de controleur et t'expliquer comment
faire...
Cédric Barribaud
- Mail original -
De:
Le 08/09/2013 19:45, Johnny B a écrit :
Salut,
Oui GLPI et Fusion Inventory
Dans le cas ou un agent ne peut être installer sur le matériel ca revient quand meme à
tout faire à la main ou via tableur ;)
http://www.glpi-project.org/
http://www.fusioninventory.org/
J'ai déployé pour un parc
Bonsoir,
j'ai une freebox et je voudrais m'acheter une antenne parabolique pour recevoir
la télé allemande que Free ne distribue pas.
Comment enregistrer ces émissions sur mon pc ? J'utilise une télé lcd, reliée à
la freebox et au pc, comme télé et écran informatique.
En cherchant sur le web,
Bonsoir,
Avec un prénom pareil tu ne peux pas échapper à l'excellent vdr !
L'idée de vdr est plus de se faire une box dédiée à cet usage :
il se comporte une fois bien configuré un peu comme une
dreambox en plus puissant.
Je te conseille de compiler toi même vdr ou d'utiliser les dépôts
pour
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Dear Rekan-rekan FOSS.
Mewakili Pawang buaya.KLAS.or.id, memberitahukan bahwa sore nanti
layanan buaya akan dimatikan untuk perpindahan lokasi fisik (pindah
kandang) dan penambahan harddisk (thanks mas Budiwijaya!)
Estimasi waktu
- --
Has probado aufs?
Tienes instalado el paquete sysstat? Ejecuta un iostat del dispositivo
donde esté la cache y dinos si el %util se pone al 100%.
Tienes separada la cache en otra partición? Eso te puede hacer mejorar
el rendimiento de tu cache y así consigues separarlos de los logs del
sistema.
El 07/09/13 20:37, Mario Vila escribió:
...
2013/09/07 18:58:24| storeUfsCreate: Failed to create
/var/spool/squid/00/98/98FA ((5) Input/output error)
2013/09/07 18:58:24| storeUfsCreate: Failed to create
/var/spool/squid/00/98/98FB ((5) Input/output error)
2013/09/07 18:58:24|
El Sat, 07 Sep 2013 20:32:19 -0400, academia escribió:
Hola lista. Comienzo a trabajar en una nueva escuela relacionada a la
Enseñanza Artística, específicamente para estudiantes de la especialidad
de Música. Ellos utilizan algunos softwares desde Windows (Ej. Guitar
Pro,
entre otros)
El Sat, 07 Sep 2013 14:37:53 -0300, Tyler Durden escribió:
El 07/09/13 14:28, Camaleón escribió:
(...)
Con sftp es muy fácil.
Grosso modo necesitas tener instalado ssh (metapaquete que instala
el demonio ssh cliente y servidor) y después sólo tienes que usar un
explorador de archivos con
El 07/09/13 18:00, Camaleón escribió:
Hola,
Después del pequeño fiasco¹ que tuve al instalar LibreOffice 4.1, hoy he
visto que ya se encuentra disponible una nueva versión (4.1.1) y he me he
decidido a instalarla. Detallo los pasos por si le sirve a alguien.
La instalación la he hecho sobre un
El Sun, 08 Sep 2013 16:35:42 +0200, eldebiandepepe escribió:
El 07/09/13 18:00, Camaleón escribió:
(...)
Synaptic → libreoffice4.0 → marcar para eliminar completamente Synaptic
→ libreoffice4.0-ure → marcar para eliminar completamente Synaptic →
libreoffice4.0-debian-menus → marcar para
El 08/09/13 16:57, Camaleón escribió:
El Sun, 08 Sep 2013 16:35:42 +0200, eldebiandepepe escribió:
El 07/09/13 18:00, Camaleón escribió:
(...)
Synaptic → libreoffice4.0 → marcar para eliminar completamente Synaptic
→ libreoffice4.0-ure → marcar para eliminar completamente Synaptic →
El Sun, 08 Sep 2013 17:42:31 +0200, eldebiandepepe escribió:
El 08/09/13 16:57, Camaleón escribió:
(...)
También instalaría el paquete de Ayuda (no llega a 8 MB) y lo
descargaría por torrent... cuestión de gustos, lo sé.
Uf, no, paso. Nunca consulto la ayuda de LO y prefiero acceder al
El 08/09/13 18:08, Camaleón escribió:
El Sun, 08 Sep 2013 17:42:31 +0200, eldebiandepepe escribió:
El 08/09/13 16:57, Camaleón escribió:
(...)
También instalaría el paquete de Ayuda (no llega a 8 MB) y lo
descargaría por torrent... cuestión de gustos, lo sé.
Uf, no, paso. Nunca consulto
El Sun, 08 Sep 2013 19:23:30 +0200, eldebiandepepe escribió:
El 08/09/13 18:08, Camaleón escribió:
(...)
También instalaría el paquete de Ayuda (no llega a 8 MB) y lo
descargaría por torrent... cuestión de gustos, lo sé.
Uf, no, paso. Nunca consulto la ayuda de LO y prefiero acceder al
Hola lista.
Que opinan acerca de esto?
https://www.schneier.com/blog/archives/2013/09/the_nsa_is_brea.html
--
To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
On 08/09/13 18:32, lati...@vcn.bc.ca wrote:
Hola lista.
Que opinan acerca de esto?
https://www.schneier.com/blog/archives/2013/09/the_nsa_is_brea.html
Que sí y que no. A ver lo importante son estos dos ensayos del sr.
Schneider:
Buenas,
¿Alguien ha ulizado/comprado/utiliza, etc portátiles de este
fabricante: http://www.mountain.es/? En concreto la gama professional:
http://www.mountain.es/epages/Mountain.sf/sece94a1f2777/?ObjectPath=/Shops/Store.Mountain/Categories/PORTABLEWS/PORTABLE_B%26P
¿Opiniones a favor y en
El 08/09/13 11:35, eldebiandep...@gmail.com escribió:
El 07/09/13 18:00, Camaleón escribió:
Hola,
Después del pequeño fiasco¹ que tuve al instalar LibreOffice 4.1, hoy he
visto que ya se encuentra disponible una nueva versión (4.1.1) y he
me he
decidido a instalarla. Detallo los pasos por si
2013/9/8 carlopmart carlopm...@gmail.com
Buenas,
¿Alguien ha ulizado/comprado/utiliza, etc portátiles de este fabricante:
http://www.mountain.es/? En concreto la gama professional:
http://www.mountain.es/epages/**Mountain.sf/sece94a1f2777/?**
El día 8 de septiembre de 2013 11:38, Camaleón noela...@gmail.com escribió:
El Sun, 08 Sep 2013 17:42:31 +0200, eldebiandepepe escribió:
El 08/09/13 16:57, Camaleón escribió:
(...)
También instalaría el paquete de Ayuda (no llega a 8 MB) y lo
descargaría por torrent... cuestión de gustos,
On 8/22/13 18:42 , j...@lillahusetiskogen.se wrote:
Vad är favoritmetoden för kryptering bland prenumeranterna?
Det beror på syftet och användningen.
För (epost-)meddelanden är pgp/gpg givet men också för för enskilda
filer, t.ex. backup-dumpar som lagras på osäker plats:
tar jhvcf - /home
Själv använder jag S/MIME för datorpost. Certifikat hämtar jag från
http://www.startssl.com/ (http://cert.startcom.org/) och/eller
http://www.cacert.org/. Bra certifikat som man kan använda för att
certifiera sin e-post-adress och inte något avancerat. Om inget annat
så är det bättre än
Olá a todos,
Estou tentando ouvir um rádio que conectei na entrada de linha do meu hp
pavillion dv6. Simplesmente isso, fazer o som dele sair nas caixas
diretamente.
Eu consigo gravar essa entrada de linha usando o audacity, e no controle
de volume do pulseaudio eu consigo ver a barra de
Desculpem o flood, mas é que já achei a resposta para esse problema. Se
alguém se interessar:
Descobri que era necessário carregar um módulo específico do pulseaudio.
pactl load-module module-loopback
pactl está no pacote pulseaudio-utils
O loopback faz com que apareça um novo dispositivo no
¡Gana un PS3 adivinando el resultado del próximo partido de nuestra selección!
Si no puedes ver este correo, entra a este link.
Esta información se envía de acuerdo a la legislación sobre correo electrónico
comercial no solicitado (SPAM), segun la ley 28493 y su reglamento. Responda
Remover
Boa tarde pessoal!
Pretendo pedir a ajuda de vcs mas preciso fazer uma mensagem grande para
externa a todos as minhas dúvidas e que por ventura tenham virado
ansiedade. Há dois anos eu comecei a minha pesquisa em virtualização para
implementar em um ambiente relativamente grande onde trabalho,
* Henrique de Moraes Holschuh h...@debian.org [2013-09-07 18:55 -0300]:
On Sat, 07 Sep 2013, Elimar Riesebieter wrote:
* Elimar Riesebieter riese...@lxtec.de [2013-09-07 15:32 +0200]:
ACK, loaded as module. Thanks for the hint. But I can't find a note
on how to verify the new microcode
OK, I have the following script (reduced, just enough to demonstrate
the problem):
--- test.sh ---
#!/bin/bash
cmd=apt-cache search debian-installer | sort | egrep --color=always
-i debian-installer
#tput nrrmc # line 3
#less -REf ($cmd) # line 4
less -REf (bash -c $cmd) # line 5
#less -REf (tput
On 2013-09-08 09:53 +0200, Zenaan Harkness wrote:
OK, I have the following script (reduced, just enough to demonstrate
the problem):
--- test.sh ---
#!/bin/bash
cmd=apt-cache search debian-installer | sort | egrep --color=always
-i debian-installer
#tput nrrmc # line 3
#less -REf ($cmd)
On 9/8/13, Zenaan Harkness z...@freedbms.net wrote:
OK, I have the following script (reduced, just enough to demonstrate
the problem):
--- test.sh ---
#!/bin/bash
cmd=apt-cache search debian-installer | sort | egrep --color=always
-i debian-installer
#tput nrrmc # line 3
#less -REf ($cmd)
On Sun, Sep 08, 2013 at 08:00:12AM +0900, Joel Rees wrote:
(1) This requires enabling two repositories that I have been avoiding
enabling, contrib and non-free. That means I have to watch the
repository more carefully when using
apt-cache search
or synaptic to look for new tools,
On Lu, 22 iul 13, 14:57:35, Robert Holtzman wrote:
The wiki.debian.org/Openbox site says to edit shortcuts in the rc.xml
file, not the lxde-rc.xml. Looking at them I couldn't tell the
difference except that the rc.xml seems more extensive. I'll have to
jump on the lxde list and try to find
Hi all,
What are the preferences to make guake transparent ?
By transparent like a mirror so you can code or do commands while
seeing the background wall-paper.
In my guake these are the preferences :-
Text color - white
background color - grey
Transparency - quite near to the transparency
hi,
I have googled for days but found most results are old and said that this
issue is supposed to be fixed.
And I couldn't found how to fix this.
The gnome-shell is laggy when changing between workspaces. This also occurs
when openning a new tab in google chrome.
The overall graphic seems
On Sun, 08 Sep 2013, Henrik Ahlgren wrote:
or synaptic to look for new tools, right? Or can we just enable those
two repositories long enough to load Henrique's tool and the microcode
updates, then disable them again?
Why do you feel that you even need to ask? You are free to handle the
On Sun, 08 Sep 2013, Joel Rees wrote:
I was hoping that AMD was not going to have the license and
non-visibility issue that plagues the Intel processor microcode
updates. But I find this original announcement from when Henrique made
the updater tool available:
Ran an update last evening to include adding mono to the layout. If I
could attach a screenshot, I would, but basically it looks to have
installed all of the packages and configure them, but is now just
sitting (still open on the 'installing software' dialog. It has been
over 12 hours, so I'm
Hello list.
What do you think about it?
https://www.schneier.com/blog/archives/2013/09/the_nsa_is_brea.html
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
On 9/09/2013 2:18 AM, Volker Birk wrote:
On Sun, Sep 08, 2013 at 12:55:05PM -0300, Henrique de Moraes Holschuh wrote:
Note that even the internal errata/fix information is bound to be really
uninteresting anyway. Backdoors would not be documented anywhere, heck, it
is very likely that only
Hi there!!
When I try to use the hciconfig command to initialized my Bluetooth
antenna like the command:
hciconfig hci0 up OR hciconfig hci0 reset
it emits an error message saying:
Can't init device hci0: Connection timed out (110).
dmesg reports the following errors messages:
[
On 08/09/13 18:43, Verde Denim wrote:
Ran an update last evening to include adding mono to the layout. If I
could attach a screenshot, I would, but basically it looks to have
installed all of the packages and configure them, but is now just
sitting (still open on the 'installing software'
Thanks a lot, much much appreciated.
I now feel I (as a computer science student, and a programmer)have a
direction in learning linux! :)
--
Regards,
Anubhav Yadav,
Computer Engineering Final Year Student,
Imperial College of Engineering and Research,
Pune.
--
To UNSUBSCRIBE, email to
On 09/08/2013 04:15 PM, Philip Ashmore wrote:
On 08/09/13 18:43, Verde Denim wrote:
Ran an update last evening to include adding mono to the layout. If I
could attach a screenshot, I would, but basically it looks to have
installed all of the packages and configure them, but is now just
Severity = important
I have a problem that may affect both the setserial (serial line config)
and acpi (power management). My system is being prepared as a firewall
and serial-line communications controller.
Linux kernels are normally configured to support 4 serial lines. I have
not recompiled
On Sunday, September 8, 2013 4:00:02 AM UTC-4, Zenaan Harkness wrote:
OK, I have the following script (reduced, just enough to demonstrate
the problem):
--- test.sh ---
#!/bin/bash
cmd=apt-cache search debian-installer | sort | egrep --color=always -i
debian-installer
#tput nrrmc # line
(Thanks for obliging, Henrik. ;-)
On Sun, Sep 8, 2013 at 5:34 PM, Henrik Ahlgren pa...@seestieto.com wrote:
On Sun, Sep 08, 2013 at 08:00:12AM +0900, Joel Rees wrote:
(1) This requires enabling two repositories that I have been avoiding
enabling, contrib and non-free. That means I have to
On Mon, Sep 9, 2013 at 12:55 AM, Henrique de Moraes Holschuh
h...@debian.org wrote:
On Sun, 08 Sep 2013, Joel Rees wrote:
I was hoping that AMD was not going to have the license and
non-visibility issue that plagues the Intel processor microcode
updates. But I find this original announcement
On 08/09/13 22:07, Verde Denim wrote:
On 09/08/2013 04:15 PM, Philip Ashmore wrote:
On 08/09/13 18:43, Verde Denim wrote:
Ran an update last evening to include adding mono to the layout. If I
could attach a screenshot, I would, but basically it looks to have
installed all of the packages and
On Mon, Sep 9, 2013 at 3:27 AM, lati...@vcn.bc.ca wrote:
Hello list.
What do you think about it?
https://www.schneier.com/blog/archives/2013/09/the_nsa_is_brea.html
Those that didn't know about it were gobsmacked.
If any of that surprises you, you haven't been paying attention.
Sent from jack@ipad4
On Sep 8, 2013, at 19:18, Philip Ashmore cont...@philipashmore.com wrote:
On 08/09/13 22:07, Verde Denim wrote:
On 09/08/2013 04:15 PM, Philip Ashmore wrote:
On 08/09/13 18:43, Verde Denim wrote:
Ran an update last evening to include adding mono to the layout. If I
On Sun, Sep 8, 2013 at 8:20 PM, Joel Rees joel.r...@gmail.com wrote:
On Mon, Sep 9, 2013 at 3:27 AM, lati...@vcn.bc.ca wrote:
Hello list.
What do you think about it?
https://www.schneier.com/blog/archives/2013/09/the_nsa_is_brea.html
Those that didn't know about it were gobsmacked.
On Mon, 2013-09-09 at 09:20 +0900, Joel Rees wrote:
On Mon, Sep 9, 2013 at 3:27 AM, lati...@vcn.bc.ca wrote:
Hello list.
What do you think about it?
https://www.schneier.com/blog/archives/2013/09/the_nsa_is_brea.html
Those that didn't know about it were gobsmacked.
If any of
On 09/08/2013 07:18 PM, Philip Ashmore wrote:
On 08/09/13 22:07, Verde Denim wrote:
On 09/08/2013 04:15 PM, Philip Ashmore wrote:
On 08/09/13 18:43, Verde Denim wrote:
Ran an update last evening to include adding mono to the layout. If I
could attach a screenshot, I would, but basically it
On Mon, Sep 9, 2013 at 9:53 AM, shawn wilson ag4ve...@gmail.com wrote:
On Sun, Sep 8, 2013 at 8:20 PM, Joel Rees joel.r...@gmail.com wrote:
On Mon, Sep 9, 2013 at 3:27 AM, lati...@vcn.bc.ca wrote:
Hello list.
What do you think about it?
Hi,
I have an issue in printing a large number in a c program. Please find
below the code snippet :
#include math.h
int main()
{
double temp = 0.0;
temp = pow(2, 2000);
printf(The value of temp is %lf\n, temp);
return 0;
}
I compiled and ran as below:
On Mon, Sep 9, 2013 at 1:41 PM, Balamurugan emailstorb...@gmail.com wrote:
Hi,
I have an issue in printing a large number in a c program. Please find below
the code snippet :
#include math.h
int main()
{
double temp = 0.0;
temp is a double. In your ordinary environment, doubles
Hoi,
Aptitude laat bij installatie zien welke packages als dependency
automatisch naar binnen gehaald worden.
De indicator is '{a}'. Voorbeeld:
screenshot
# aptitude install mercurial-git
The following NEW packages will be installed:
mercurial{a} mercurial-common{a} mercurial-git
Op 2013-09-08 om 10:27 schreef Geert Stappers:
Hoi,
Aptitude laat bij installatie zien welke packages als dependency
automatisch naar binnen gehaald worden.
De indicator is '{a}'. Voorbeeld:
screenshot
# aptitude install mercurial-git
The following NEW packages will be installed:
Op 2013-09-08 om 10:38 schreef Geert Stappers:
Op 2013-09-08 om 10:27 schreef Geert Stappers:
Hoi,
Aptitude laat bij installatie zien welke packages als dependency
automatisch naar binnen gehaald worden.
De indicator is '{a}'. Voorbeeld:
screenshot
# aptitude install
On 08/09/13 10:58, Geert Stappers wrote:
Ik gebruik nu deze (smerige?) truuk: `aptitude search .`
Als er iets beter is dan zoeken op een package waar een punt
in de beschrijving staat, dan hou ik mij aanbevolen.
En eigenlijk ging het niet om automatisch ge-installeerd packages,
maar hoe
Op 2013-03-08 om 14:09 schreef Winfried Tilanus:
On 03/07/2013 09:15 PM, Paul van der Vlis wrote:
Hoi,
Jitsi is een open source alternatief voor Skype, de features zien er
goed uit. https://jitsi.org/
Een van de grote voordelen van Jitsi is dat het zowel SIP als
XMPP-Jingle in een
76 matches
Mail list logo