nieistniejąca domena

Hello debian-user-polish, Czy ktoś wie co powinienem wpisać w konfiguracji postfixa aby w czasie połączenia modemowego nazwe komputera do Sender: ? W tej chwili mam kjonca.kjonca.bogus i ciągle mam odrzucaną pocztę, z powodu nie istniejącej domeny w sender. -- Best regards, Kamil

Autentykacja w postfiksie ?

Hello debian-user-polish, Jest sobie komputerek. Na tym komputrerku pracuje postfix. Chciałbym wysyłać pocztę z tego komputerka przez inny. Ten inny chce przy odbieraniu poczty do wysłania przeprowadzać autentykację. Jak to zmusić postfiksa aby relayerowi przekazywał co trzeba ? KJ Dopuszczam

Re[2]: Jak jest z ta historia ...

Hello Robert, Tuesday, July 30, 2002, 8:16:41 AM, you wrote: [...] RP Zapisze się historia ze wszystkich poprawnie zamkniętych terminali (w RP kolejności zamykania), a nie tylko z ostatniego - oczywiście dopiszą się RP tylko polecenia wklepane w trakcie sesji. To chba jest zależne od

Re: pppd nie rozpoznaje opcji exec

On Mon, Dec 11, 2006 at 11:56:10AM +0100, Albert Czarnecki wrote: Witam proboje uruchomic polaczenie via gprs mam gotowe skrypty do modemu pod linuxa i problem jest taki na sargu jak wydaje polecenie pppd call orange-connect-chat to wywala mi blad pppd call orange-connect-chat pppd:

Re: pppd nie rozpoznaje opcji exec

On Mon, Dec 11, 2006 at 12:28:12PM +0100, Albert Czarnecki wrote: [...] Tylko ze testuje to rowniez na laptopie gdzie mam sida i tam nie wyrzuca takiego bledu, popbralem te skrypty od producenta modemu takze niepowinno byc z nimi zadnych problemow ale dziwne ze na sidzie idzie a na sargu

Re: pppd nie rozpoznaje opcji exec

On Mon, Dec 11, 2006 at 12:48:51PM +0100, Albert Czarnecki wrote: Kamil Jońca napisał(a): On Mon, Dec 11, 2006 at 12:28:12PM +0100, Albert Czarnecki wrote: [...] Tylko ze testuje to rowniez na laptopie gdzie mam sida i tam nie wyrzuca takiego bledu, popbralem te skrypty od producenta

pam_lastlog - co ś mam skopane?

Przy okazji upgrade sudo natknąłem się na dziwne segfaulty. Zacząłem drążyć i do czego doszedłem: 1. Sudo w czasie działania wczytuje /etc/pam.d/others mimo istniejącego /etc/pam.d/sudo Poniżej strace przefiltrowany za pomoca grep pam.d ===

Re: [OT] - Akcja z koszulkami - reaktywacja :)

Michał Prokopiuk mic...@linuxstuff.pl writes: [...] Jako, że ludzie mnie pytają czy nie dało by się powtórzyć akcji z hurtowym zakupem koszulek, pytanie do Was - bylibyście zainteresowani taką akcją? Ostatnio zamawiałem koszulki do siebie do firmy, okazało się, że w hafciarni mają jeszcze

Bluetooth + cli =?

I try to pair device with cli, and I cannot #aptitude install bluetooth #aptitude instal bluez-tools %hcitool scan Scanning ... 90:21:55:5A:EC:8A kappa %bluez-simple-agent hci0 90:21:55:5A:EC:8A RequestPasskey

wget certificates

I have strange problem with wget: $wget -e background = off -v -x 'https://www.centrum24.pl/bzwbkonline/eSmart.html?typ=90lang=pl' --8---cut here---start-8--- --2011-05-19 07:26:00-- https://www.centrum24.pl/bzwbkonline/eSmart.html?typ=90lang=pl Resolving

Re: wget certificates

David Sastre d.sastre.med...@gmail.com writes: On Thu, May 19, 2011 at 07:27:34AM +0200, Kamil Jońca wrote: I have strange problem with wget: $wget -e background = off -v -x 'https://www.centrum24.pl/bzwbkonline/eSmart.html?typ=90lang=pl' --8---cut here---start

Re: wget certificates

Camaleón noela...@gmail.com writes: On Thu, 19 May 2011 07:27:34 +0200, Kamil Jońca wrote: I have strange problem with wget: (...) Validation SSL SGC CA': Unable to locally verify the issuer's authority. To connect to www.centrum24.pl insecurely, use `--no-check-certificate'. Wget

Re: wget certificates

Camaleón noela...@gmail.com writes: On Thu, 02 Jun 2011 15:22:46 +0200, Kamil Jońca wrote: Camaleón noela...@gmail.com writes: On Thu, 19 May 2011 07:27:34 +0200, Kamil Jońca wrote: Validation SSL SGC CA': Unable to locally verify the issuer's authority. To connect to www.centrum24.pl

Huawei e122 - how to make symlink to usb modem?

I have e122 modem. I would have symlink to /dev/ttyUSBX. (modem device) But simple rule: --8---cut here---start-8--- SUBSYSTEM==tty,ATTRS{idVendor} == 12d1 , ATTRS{idProduct} == 1003, SYMLINK+=e122 --8---cut

Re: Huawei e122 - how to make symlink to usb modem?

Camaleón noela...@gmail.com writes: On Sun, 12 Jun 2011 06:55:45 +0200, Kamil Jońca wrote: I have e122 modem. I would have symlink to /dev/ttyUSBX. (modem device) But simple rule: --8---cut here---start-8--- SUBSYSTEM==tty,ATTRS{idVendor} == 12d1

Re: Huawei e122 - how to make symlink to usb modem?

Camaleón noela...@gmail.com writes: On Sun, 12 Jun 2011 16:14:53 +0200, Kamil Jońca wrote: Camaleón noela...@gmail.com writes: What's the output for udevinfo on that device? (...) Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices

[SOLVED] Re: Huawei e122 - how to make symlink to usb modem?

kjo...@poczta.onet.pl (Kamil Jońca) writes: I have e122 modem. I would have symlink to /dev/ttyUSBX. (modem device) But simple rule: SUBSYSTEM==tty,ATTRS{idVendor} == 12d1 , ATTRS{idProduct} == 1003, SYMLINK+=e122 does not work. It was enough to put rule in /etc/udev/rules.d/zz

Re: Switching from ipw3945 to iwl3945 driver]

Unfortunately I can't get it working on my new shiny Thipad R61i laptop. I think I do ewerything according to http://wiki.debian.org/iwlwifi (except that I haven't ip command so use ifconfig). after inserting module I got: iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver

[Re: Switching from ipw3945 to iwl3945 driver] - solved?

On Mon, Feb 11, 2008 at 09:13:34PM +0100, Kamil Jońca wrote: [...] It looks like that iwl3945 cannot assocciate when ssid broadcast is off (on Access point) and (as a consequence) ap_scan in wpa_supplicant.conf on client station is setting to 2 (meaning try all network blocks in order). After

PAM profiles

Recently I updated my test debian box (sid), and aptitude asked me about PAM profiles. Googling with PAM profiles show nothing about PAM, except: https://wiki.ubuntu.com/PAMConfigFrameworkSpec Am I missing something? another keywords? 1. What is proper way now to specify for example minlen

Asus A8N-E - debian-amd64 hangs during installation

I have box with sid i386 installed on it. It has two disks WDC WD1001FALS in raid5 array (md0) On md0 exists lvm. I tried to install debian-6.0.1a-amd64 but with no success :( 1. Firstly I tried to install on prepared logical volume - kernel oops (dmesg can be seen

Re: Asus A8N-E - debian-amd64 hangs during installation

Thierry Chatelet tchate...@free.fr writes: On Tuesday 05 April 2011 20:45:58 Kamil Jońca wrote: [...] Try to increase the voltage on memories first (if I recall right what did), or on cpu. You should find a post from me around the time you give. Thierry Thanks. I made some changes

[SOLVED?] Asus A8N-E - debian-amd64 hangs during installation

kjo...@poczta.onet.pl (Kamil Jońca) writes: [...] Inspired by posts about setting hardware/bios options, I turned off H/W remapping over 4G (IIRC) Installation finished succesfully and now I'll try to play with newly 64 bit system. We'll see ... Thanks. KJ -- http://modnebzdury.wordpress.com

Re: Asus A8N-E - debian-amd64 hangs during installation

Andrej Kacian andrej+deb...@kacian.sk writes: On Tue, 05 Apr 2011 20:45:58 +0200 kjo...@poczta.onet.pl (Kamil Jońca) wrote: It has two disks WDC WD1001FALS in raid5 array (md0) Hello, just out of curiosity, why did you choose raid5 for a two-disk setup? Sorry for late reply; Simply: I

hs2350 and wwan0 howto?

In my laptop I have internal modem which presents as: $lsusb --8---cut here---start-8--- Bus 001 Device 007: ID 03f0:3d1d Hewlett-Packard --8---cut here---end---8--- it works with pppd without troubles, but I want to use

Huawei E173 - no more network interface?

Sometimes[1] I had to use Huawei E173 gsm modem. About a year ago, when I put this modem in USB port I got network interface like wwan0 or usb0. But now this not happen any more. I got only ttyUSB? interfaces. What should I check/do to have network interface? KJ --

Re: Huawei E173 - no more network interface?

kjo...@poczta.onet.pl (Kamil Jońca) writes: > Sometimes[1] I had to use Huawei E173 gsm modem. > About a year ago, when I put this modem in USB port I got network > interface like wwan0 or usb0. > But now this not happen any more. > I got only ttyUSB? interfaces. It is considered

Debian stretch hiberante hooks

There is laptop with "stretch/sid" on it. I want umount all remote filesysems before suspending/hibernating it. When google I found only solutions referring to pm-utils and /etc/pm/sleep.d sripts. But this does not work for me. It looks like pm-hibernate is not even calling. So my question is:

[SOLVED] Re: Debian stretch hiberante hooks

kjo...@poczta.onet.pl (Kamil Jońca) writes: [...] Finally I got it (I think) I put file /etc/systemd/system/remote-umount.service which contains: --8<---cut here---start->8--- [Unit] Description=Umount remote cifs/sshfs filesystems Before=suspend.

Systemd best practices (was: [SOLVED] Re: Debian stretch hiberante hooks)

Ansgar Burchardt <"Ansgar Burchardt"@43-1.org> writes: > Hi, > [...] > > Just using "sleep.target" instead of the three individual ones should > also work and do the same. > > Ansgar Indeed. Thanks. By the way: whether there is a documentation describing best practices and "use cases" for

Re: exim4 - tls errors [partially solved]

deloptes writes: > > Try to disable TLS > > MAIN_TLS_ENABLE = false > > in /etc/exim4/exim4.conf.template Wrong. It was not defined, and this caused all tls_* options were unset (tls_advertise_hosts in particular) nevermind. 1. I used

exim4 - tls errors

I recently upgraded my box and now I got --8<---cut here---start->8--- Warning: No server certificate defined; TLS connections will fail. Suggested action: either install a certificate or change tls_advertise_hosts option --8<---cut

Re: exim4 - tls errors [SOLVED]

deloptes <delop...@gmail.com> writes: > Kamil Jońca wrote: > >> kjo...@poczta.onet.pl (Kamil Jońca) writes: >> >> some background >> 1. with exim 4.87 tls_advertise_hosts defaults to *. >> 2. also MAIN_TLS_ADVERTISE_HOSTS (main/03_exim4-config_tlsopt

question about limits

A long time ago I set limits in /etc/security/limits.conf recently I have to run some independent firefox instances: --8<---cut here---start->8--- for q in 1 2 3 4 5 6 7 8 9 10; do iceweasel -no-remote -P profile$q & ; done --8<---cut

Re: exim4 - tls errors [SOLVED]

kjo...@poczta.onet.pl (Kamil Jońca) writes: some background 1. with exim 4.87 tls_advertise_hosts defaults to *. 2. also MAIN_TLS_ADVERTISE_HOSTS (main/03_exim4-config_tlsoptions) 3. to get rid this message (excet to create certificate) tls_advertise_hosts should be _empty_. so set --8

bluetooth name

For a long time bluetooth devices were named as something like %h-%d I was quite happy with this. But lastly my notebook was discovered as ChromeLinux_. Does anybody know: what happened? how can I restore previous behaviour? Googling (for chromeLinux bluetooth) shows me only

Debian menu for fvwm2

I have debian box with sid After one of last upgrade I realized that programs disappeared from menu. I have some googling and read that debian "abandon" menu method and migrate to "*.desktop" files. (Yes?) Unfortunately I cannot use *.desktop files. There is fvwm-menu-desktop but I cannot use

ussp-push - cannot send any file :(

I used to use ussp-push to send files to my ebook-reader, rather rarely. But now this does not work: --8<---cut here---start->8--- ussp-push --debug B4:AB:2C:06:FC:27@ ~/Pulpit/wakacje.pdf wakacje.txt

Re: logrotate - got compressed log

kjo...@poczta.onet.pl (Kamil Jońca) writes: > Andy Smith <a...@strugglers.net> writes: > >> Hi Kamil, >> >> On Sat, Feb 04, 2017 at 10:11:00AM +0100, Kamil Jońca wrote: >>> I have logrotate with config (excerpt) >>> --8<---cut here

logrotate - got compressed log

I have logrotate with config (excerpt) --8<---cut here---start->8--- compress delaycompress dateext mail root compresscmd /usr/bin/xz uncompresscmd /usr/bin/unxz compressext .xz compressoptions -9 tabooext +.dpkg-bak minsize 1M [...] --8<---cut

Re: logrotate - got compressed log

Andy Smith <a...@strugglers.net> writes: > Hi Kamil, > > On Sat, Feb 04, 2017 at 10:11:00AM +0100, Kamil Jońca wrote: >> I have logrotate with config (excerpt) >> --8<---cut here---start->8--- >> compress > > […]

polickit rules - what wrong

I try to allow ordinary user to start/stop system service. I try to make /etc/polkit-1/localauthority/50-local.d/49-nopasswd_limited.conf which contains: --8<---cut here---start->8--- polkit.addRule(function(action, subject) { if (action.id ==

systemd - how to run system service by user target

Assume we have openvpn.service. This service neccessary only when I want to connect to my work from home. Is it possible to make user target which will be automatically run this service? KJ -- http://stopstopnop.pl/stop_stopnop.pl_o_nas.html My mind can never know my body, although it has

Re: mdadm - two questions

Dan Ritter writes: > http://serverfault.com/questions/43677/best-way-to-grow-linux-software-raid-1-to-raid-10 Yes. And it was my idea (except rsync I plan to do pvmove to new aray) Thanks for confirmation. KJ -- http://stopstopnop.pl/stop_stopnop.pl_o_nas.html The

Re: Problems with hibernation - randomly cannot resume [Solved?].

Hugo Vanwoerkom <hvw59...@care2.com> writes: > On 11/17/2016 02:23 AM, Kamil Jońca wrote: >> Debian sid laptop. >> Recently I upgraded some packages. >> And I have problem with hibernation (to disk). >> When I turned on it resumes, but immediately restart.

Re: mdadm - two questions

Dan Ritter writes: >> I want to extend space by adding another two disks. Is it possible somehow >> extent md0? Or the only way is to create second md device, and assign it >> to volume group? > Unfortunately I cannot see how from raid1 of 2*1TB disks migrate to

mdadm - two questions

(I do not know it is proper place to ask these questions.) 1. man mdadm has some info about CONTAINER-s. I think, that I understand how to use it, but I cannot imagine use case of containers. Can someone explain whent it is desirable to use containers, especially DDF instead of free mdX devices?

Re: sudo + gpg - howto?

Michael Luecke writes: [...] > > > You could also try putting the option "allow-loopback-pinentry" to > ~/.gnupg/gpg-agent.conf and restarting the agent. > > Then you could start gpg with '--pinentry-mode loopback' or put > "pinentry-mode loopback" to ~/.gnupg/gpg.conf. Hm.

Re: mdadm - two questions

kjo...@poczta.onet.pl (Kamil Jońca) writes: [...]> 2. there is md0 (raid1) with two disk in it. It is PV for lvm. > I want to extend space by adding another two disks. Is it possible somehow > extent md0? Or the only way is to create second md device, and assign it > to volume grou

sudo + gpg - howto?

I have gpg-encrypted backups made by amanda (gnutar). Decrypting was done by call gpg with --passphrase-fd option. Recently I have to see some backup contensts and as usual I wrote: --8<---cut here---start->8--- sudo amrecover ... --8<---cut

Problems with hibernation - randomly cannot resume.

Debian sid laptop. Recently I upgraded some packages. And I have problem with hibernation (to disk). When I turned on it resumes, but immediately restart. Unfortunately it is not always. Sometimes it resumes properly. What should I check/test etc? KJ -- http://wolnelektury.pl/wesprzyj/teraz/

Re: Problems with hibernation - randomly cannot resume.

Hugo Vanwoerkom <hvw59...@care2.com> writes: > On 11/17/2016 02:23 AM, Kamil Jońca wrote: >> Debian sid laptop. >> Recently I upgraded some packages. >> And I have problem with hibernation (to disk). >> When I turned on it resumes, but immediately restart.

LVM RAID vs LVM over MD

So far I used lvm with raid1 device as PV. Recently I have to extend my VG (https://lists.debian.org/debian-user/2016/11/msg00909.html) and I read some about lvm. If I understand correctly, LVM have builtin RAID1 functionality. And I wonder about migrating lvm over md --> (lvm with raid1) over

Re: LVM RAID vs LVM over MD

Henrique de Moraes Holschuh <h...@debian.org> writes: > On Sat, 03 Dec 2016, Kamil Jońca wrote: >> If I understand correctly, LVM have builtin RAID1 functionality. >> And I wonder about migrating >> lvm over md --> (lvm with raid1) over physical hard drive partit

Re: mdadm - two questions

Rick Thomas writes: > Hi Kamil, > > You’d get a bit more space by configuring your 4 drives as a RAID5 > array (3TB usable for RAID5, vs 2TB usable for RAID10). The downside > of RAID5 is that the RAID10 (or the one LV with two RAID1 PVs — they > amount to the same thing for

Re: mdadm - two questions

Andy Smith <a...@strugglers.net> writes: > Hi Kamil, > > On Tue, Nov 29, 2016 at 01:26:55AM +0100, Kamil Jońca wrote: >> My first plan was somehow migrate to RAID10. I thought that is simply >> "raid0 over some raid1 arrays" so it should be legal to use 2*1TB

Re: systemd autocompletion does not work

Michael Biebl <bi...@debian.org> writes: > Am 28.07.2017 um 06:14 schrieb Kamil Jońca: > >> /etc/dbus-1/system.d/: >> >> -rw-r--r-- 1 root root 3947 Apr 29 2014 org.freedeskt

Re: testing, upgrade of openssl libssl1.1 ( 1.1.0f-3 => 1.1.0f-4 )

Stephan Seitz writes: > On Mo, Aug 14, 2017 at 08:02:40 -0400, songbird wrote: >> may break your getting of mail process. >>(i'm using getmail). >> >> luckily downgrading the two packages restores >>things to working again. >> >> no time right now for me to

Re: testing, upgrade of openssl libssl1.1 ( 1.1.0f-3 => 1.1.0f-4 )

Sven Hartge <s...@svenhartge.de> writes: > Kamil Jońca <kjo...@poczta.onet.pl> wrote: >> Stephan Seitz <stse+deb...@fsing.rootsland.net> writes: > [...] > >> It is also break lot of other thigs: for example: my radius server >> start to refuse to a

systemd autocompletion does not work

1. Box with debian sid, updated frequently 2. Recently I realized that completion of systemd units does not work, ie. $sudo systemd restart gives me "@" sign only. I noticed that, at the moment of pressing tab I got in /var/log/auth.log --8<---cut

Re: systemd autocompletion does not work

Michael Biebl writes: [...] > > Are you sure you are using systemd as PID 1? Is systemd-sysv installed > and have you rebooted since installing that package? > hm. $ps ax shows [..stripped..] 1 ?Ss 0:33 /sbin/init then $ll /sbin/init lrwxrwxrwx 1 root root 20 Jul

Re: systemd autocompletion does not work

Michael Biebl <bi...@debian.org> writes: > Am 27.07.2017 um 19:09 schrieb Kamil Jońca: >> >> 1. Box with debian sid, updated frequently >> 2. Recently I realized that completion of systemd units does not work, >> ie. >> $sudo systemd restart gives m

LibreOffice - middle click paste does not work.

Sid box with libreoffice. After recent upgrade I realized that paste selection with Middle Mouse button does not work. Can anyone confirm? I do not know if I have to report bug :) KJ -- http://stopstopnop.pl/stop_stopnop.pl_o_nas.html Life, like beer, is merely borrowed. -- Don

Re: LibreOffice - middle click paste does not work.

Ben Finney <bign...@debian.org> writes: > kjo...@poczta.onet.pl (Kamil Jońca) writes: > >> Sid box with libreoffice. >> After recent upgrade I realized that paste selection with Middle Mouse >> button does not work. Can anyone confirm? I do not know if I have

Re: LibreOffice - middle click paste does not work.

kjo...@poczta.onet.pl (Kamil Jońca) writes: > > it was upgrade frrom 5.3.5~rc1 to 5.4.0-1 > > >> Can you give a repeatable sequence of steps that others can also try to >> reproduce what you're seeing? > 1. Open Writer or Calc window > 2. Open emacs or xterm window

Re: systemd autocompletion does not work

Michael Biebl <bi...@debian.org> writes: > Am 27.07.2017 um 19:09 schrieb Kamil Jońca: >> >> 1. Box with debian sid, updated frequently >> 2. Recently I realized that completion of systemd units does not work, >> ie. >> $sudo systemd restar

Display does not resume after hibernation

I have strange thing with my laptop. After hibernation display does not start. In logs I can see: --8<---cut here---start->8--- 2017-09-29T06:30:16.830765+02:00 bambus kernel: [83141.182895] atomic remove_fb failed with -22 2017-09-29T06:30:16.830780+02:00

gpg fools amanda 3.5

"Always" I have encrypted amand backup with gpg. Recently, after upgrade amanda to version 1:3.5-2 I noticed that amanda 'does not work' - it hangs for (near) infinity; no files in holding directory etc. As googling gives me no useful results, I assumed that it is rather something wrong with my

Re: [linux.debian.user] question about exim.

Tixy writes: [..]] > > is a valid way of specifying a group in a field that expects an address > > But the log snippet the OP posted had: > > ... failing address in "To:" header is: > ): "@" or "." expected after >

Re: [linux.debian.user] question about exim.

kjo...@poczta.onet.pl (Kamil Jońca) writes: [...] > > Hmm. Good point. There are two options: > 1. onet (my isp) is broken > 2. fetchmail is broken Well, quick look into fetchmail manual and we have: --8<---cut here---start->8---

[linux.debian.user] question about exim.

(onet was blocked, second try) Hello. Recently I found, that some mails (fetched witch fetchmail) does not reach my mailbox. Done some check and: --8<---cut here---start->8--- 2018-05-07 11:44:14.306 [9516] 1fFcgn-0002TU-Pb H=(alfa.kjonca) [127.0.0.1]:53574

Postfix - sasl auth when password have colon

I try to configure postfix machine act as smarthost i.e. --8<---cut here---start->8--- [...] sender_dependent_default_transport_maps=hash:/etc/postfix/sender_transport_maps smtp_sender_dependent_authentication = yes smtp_sasl_password_maps =

Re: Acrobat Reader stops works

Carl Fink writes: > Another thought: according to the app database at winehq.org, it's > possible to install the Windows version under Linux. And I think, that would be only working solution. But I am curious why its workink on my second computer :/ KJ --

Re: Acrobat Reader stops works

deloptes <delop...@gmail.com> writes: > Kamil Jońca wrote: > >> Carl Fink <ca...@panix.com> writes: >> >>> Another thought: according to the app database at winehq.org, it's >>> possible to install the Windows version under Linux. >> >>

Re: Acrobat Reader stops works

Carl Fink <ca...@panix.com> writes: > On 01/15/2018 06:45 AM, Jerome BENOIT wrote: >> >> On 15/01/18 13:32, Kamil Jońca wrote: >>> Recently I have to reinstall my system. >>> Most of things works OOTB, but I cannot make Acrobat Reader (9.5.5) to >>

Re: Acrobat Reader stops works

deloptes <delop...@gmail.com> writes: > Kamil Jońca wrote: > >> Another puzzle element: with libc6_2.25-6 (i386+amd64) reader works. > > what puzzle, you said you compared all the libraries. I have in stretch: > libc6:amd64/i386 2.24-11+deb9u1 > > with which ver

Re: Acrobat Reader stops works

Sven Joachim writes: [...] >> >> I am using sid. And when is installed libc6_2.25-6 then acrobat worked on >> both machines. >> when 2.26-4 is installed work on one machine, and does not work on >> second. > > A shot in the dark: this might be bug#887169[1], try the

Re: Acrobat Reader stops works

kjo...@poczta.onet.pl (Kamil Jońca) writes: > Carl Fink <ca...@panix.com> writes: > >> Another thought: according to the app database at winehq.org, it's >> possible to install the Windows version under Linux. > > And I think, that would be only working soluti

policykit rule example.

I try to use policykit. But (maybe I use wrong key words for googling) I cannot find any non-trivial example for pkla files (onyl JS-like ones) Can anybot help me with this? Simple task: want to user kjonca be able to start/stop openvpn without asking password. Any hints/examples? KJ --

Re: black screen after hibernation

deloptes writes: [...] > > what versions do you have there Well. I cannot reproduce this - have some disaster on this system, and reinstalled debian. With fresh installation resuming works :/ KJ -- http://stopstopnop.pl/stop_stopnop.pl_o_nas.html Mount St. Helens should

Libreoffice eats 100%cpu

After installing ii libreoffice-base-core1:5.4.4-1amd64 ii libreoffice-calc 1:5.4.4-1amd64 ii libreoffice-common 1:5.4.4-1all ii libreoffice-core 1:5.4.4-1amd64 ii libreoffice-gtk2 1:5.4.4-1amd64 ii

Acrobat Reader stops works

Recently I have to reinstall my system. Most of things works OOTB, but I cannot make Acrobat Reader (9.5.5) to work. Stracing shows segmentation fault (catched) in main thread. Worse thing is, on second computer with the same libraries(and the same versions) acroread work. Any hints/thoughts? KJ

black screen after hibernation

I have strange problem with hibernation (to disk) on my laptop. After resume my screen remains blank. (It is similar to https://lists.debian.org/debian-user/2017/01/msg00177.html, but in my case it is regardless if monitor was off before hibernation) System appears to be alive (can ssh to it,

Re: black screen after hibernation

deloptes <delop...@gmail.com> writes: > Kamil Jońca wrote: > >> But I cannot turn on my monitor. > > screen saver? Can you explain? KJ -- http://stopstopnop.pl/stop_stopnop.pl_o_nas.html Never have children, only grandchildren. -- Gore Vidal

Python/ansible - strange memory management?

I have strange problem: there is an ansible playbook. And on some some computers this playbooks takes < 500M RAM, on 2 others more than 3-4GG. I cannot see any corelations between python versions, ansible versions, or python modules. Any thoughts (I do not know, libc version or kernel memory

strace (brk) output - how to interpret this?

Recently I have to debug some program and got one line --8<---cut here---start->8--- execve("..something...") brk(NULL) = 0x5564a8662000 --8<---cut here---end--->8--- surprised me I understand

Re: Dovecot and zlib: Mails arrive compressed

Markus Grunwald writes: > Hello, > >> Stupid question: How do you acces your emails? >> 1. Using dovecot imap >> 2. reading mbox(maildir?) files by thunderbird? > > Not a stupid question at all: via dovecot imap Try to add "zlib" plugin globally, or to "protocol imap" section. KJ --

Thunderbird - big fonts in messages.

After one of last thunderbird upgrades, fonts in messages are bigger, than earlier. (and unaesthetic :) ) This concerns HTML messages, with "Simple HTML" view. Any thounghts, how can I restore old look? KJ -- http://stopstopnop.pl/stop_stopnop.pl_o_nas.html QOTD: All I want is more

Playing with systemd timers - best practices.

Recently I found that systemd has timers which can replace (and extend) cron functionality. My question is: I have crontab like this: --8<---cut here---start->8--- 1 * * * * script.sh site1 3 * * * * script.sh site2 9 * * * * script.sh site3 2 * * * *

Re: Acrobat Reader stops works

deloptes <delop...@gmail.com> writes: > Kamil Jońca wrote: > >> 1. With strace I checked which libraries were open, then (with dpkg -S ) >> found packages - no differences on *.so files. >> 2. Moreover I copied  proper *.so files from "working"  to "no

Re: policykit rule example.

Brian writes: > Is > > https://lists.debian.org/debian-user/2015/10/msg00641.html > > more suitable for your task? It is possible, although: 1. openvpn has to be run as root (routing and network interfaces) I do not know if I can define proper systemd unit. 2. I want to

Re: policykit rule example.

Brian <a...@cityscape.co.uk> writes: > On Tue 23 Jan 2018 at 13:29:35 +0100, Kamil Jońca wrote: > >> [...] >> >> Any hints/examples? > > https://lists.debian.org/search.html > > Search debian-user with "pkla". Thread "Embarrassing secur

Re: Multifunction (printer + scanner) recommendation?

kjo...@poczta.onet.pl (Kamil Jońca) writes: [...] Thanks for everybodys' replies. Now I think about brother DCP-1510E. We'll see ... KJ -- http://wolnelektury.pl/wesprzyj/teraz/ When the government bureau's remedies don't match your problem, you modify the problem, not the remedy.

Multifunction (printer + scanner) recommendation?

I am not sure if it is best group for this question but I am tired with searching over numerous web pages :( I need to buy device to scan and print which: - can scan with sane - can print from my debian box (strongly prefer without binary/closed drivers[1], I'm not sure about hplip[2]) - no

Re: Multifunction (printer + scanner) recommendation?

kjo...@poczta.onet.pl (Kamil Jońca) writes: > kjo...@poczta.onet.pl (Kamil Jońca) writes: > > > [...] > Thanks for everybodys' replies. > Now I think about brother DCP-1510E. I bought it, and have mixed feelings. With brother's drivers I can scan and print (and Windows 7 mac

postfix "delivery-date" - how to?

Exim has a nice feature: it puts "Delivery-date" header when terminates delivery to pipe/mailbox. Is it posible with postfix? KJ -- http://wolnelektury.pl/wesprzyj/teraz/ Down with categorical imperative!

Re: postfix "delivery-date" - how to?

Dan Ritter writes: [...] > but I think you want in-message headers. So you need a filter > that can insert one cleanly. My conclusions are the same (and another solution: lmtp, because it would be put into dovecot accessed mailboxes) > I'm not sure why you want to do

Re: Thunderbird cannot open links

Juanjo Benages writes: [...] > > Have you found this bug: > https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904834 > I can't reproduce your bug but it has a workaround you can try Unfortunately it is not the case. KJ -- http://wolnelektury.pl/wesprzyj/teraz/ An infallible method of

wpa_supplicant cannot authenticate against freeradius 3.0.16+dfsg-4.1+b1

(previously sent to debian-devel by mistake) Recently I tried to upgrade my freeradius package to 3.0.16+dfsg-4.1+b1 And after that my laptop with wpa_supplicant stops authenticate: excerpt from wpa_supplicant network={ ssid=<<...> proto=RSN key_mgmt=WPA-EAP

nftables howto?

Recent upgrade surprised me with iptables->nftables migration. I understand I should prepare to migrate, but I cannot found comprehensive documentation of nftables. For example: In my ipsec updown script I have something like: --8<---cut here---start->8---

  1   2   3   >