(WW) RADEON(0): monitor1: Using default hsync range of 28.00-33.00kHz (WW) RADEON(0): monitor1: using default vrefresh range of 43.00-72.00Hz (II) RADEON(0): Clock range: 20.00 to 350.00 MHz
(II) RADEON(0): Not using default mode "800x600" (hsync out of range) (II) RADEON(0): Not using mode "800x600" (no mode of this name) (--) RADEON(0): Virtual size is 640x480 (pitch 640) (**) RADEON(0): *Mode "800x600" (**) RADEON(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) RADEON(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (II) RADEON(0): Valid Clone Mode: 640x480 (II) RADEON(0): Total of 1 clone modes found ------------ (II) RADEON(0): Total number of valid DDC mode(s) found: 0 (WW) RADEON(0): Mode 800x600 is out of range. (WW) RADEON(0): Valid modes must be between 320x200-0x0 (WW) RADEON(0): Mode 640x480 is out of range. (WW) RADEON(0): Valid modes must be between 320x200-0x0 (II) RADEON(0): Total number of valid FP mode(s) found: 0 (EE) RADEON(0): No valid mode found for this DFP/LCD (EE) Screen(s) found, but none have a usable configuration. Let me say, there must be some driver problem. I think the major problem for setting up a cloned LCD/DFP mode is the lack of DDC detected modes for the 2nd port, so the driver is unable to clone any mode at all. i would like to pass that on to the experts. i dont know if using a snapshot version of the drivers or of X11 will help in any way. -----Original Message----- From: ddeki [mailto:[EMAIL PROTECTED] Sent: Sunday, August 17, 2003 17:50 To: [EMAIL PROTECTED] Subject: [XFree86] Driver problem for RADEON 9100 Hi I have a problem whit drivers for my graphic card RADEON 9100, I tray whit ati and radeon drivers and still is the same problem. The config and log file is attached. Thanks Dejan Bogoevski Macedonia [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> _______________________________________________ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel