[EMAIL PROTECTED] made an utterance to the drakelist gang
--
Bob
Thanks for the reply. This explains why the what I thought might be an
overtone frequency is not a multiple. I'll contact international when they
open and
Garey Barrell [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Jim -
OK. You can use a 6AU6 or 6AH6 in place of the 6HS6, certainly for test
purposes.
Most transmitters will also put out power with the
EP Swynar [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Good Afternoon,All,
If you want to have a peak at what may surely prove to be ...the smile of
the day for many of you, please click onto the following web
[EMAIL PROTECTED] writes:
EP Swynar [EMAIL PROTECTED]
To Ed VE3CUI a nice home brew item with lots of time spent drilling holes
for xtal sockets, and enough small wiring to give you a headache. Not bad
especially as it does what you want.
I had thought about doing the identical thing
Mike Williams [EMAIL PROTECTED] made an utterance to the drakelist gang
--
That is one heck of a crystal pack! Nice work.
73 de W4DLMike
Pompano Beach, FL USA
- Original Message -
From: EP Swynar [EMAIL
EP Swynar [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Hi Mike,
Many thanks for the FB note...
I can assure you of one thing: it WAS tedious work! Thirty-two sockets
equals 96 holes...I get tired just thinking
Hello to all,
Are the crystals for the R4 and R4C the same. ie 12.6 is for 28mhz?
tnx
Bill
[EMAIL PROTECTED] writes:
I meant 12.6 is for 1.5 mhz
That's what I have. Carl WD8NHK
**It's Tax Time! Get tips, forms, and advice on AOL Money
Finance. (http://money.aol.com/tax?NCID=aolprf000301)
so crystals for the R4C will work in an older R4?
BIll
[EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] writes:
I meant 12.6 is for 1.5 mhz
That's what I have. Carl WD8NHK
It's Tax Time! Get tips, forms and advice
[EMAIL PROTECTED] writes:
so crystals for the R4C will work in an older R4?
BIll
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) wrote:
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) writes: I meant 12.6 is for
1.5 mhz
That's what I have. Carl WD8NHK
MAY NOT ! you asked
Carl,
Very good, I guess I need to do more research. I only ask because I saw
some crystals up on E-bay for the r4c and I need to get some for my twins
tnx and 73
Bill Wa2jhs
[EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] writes:
so crystals for the R4C will work in an older R4?
BIll
Jim Gerke [EMAIL PROTECTED] made an utterance to the drakelist gang
--
According to Drake's Crystal Order Form, the
R4/R4A/R4B/R4C/T4X/T4XB/T4XC all use the same crystals.
73, Jim K5JG
billjhs wrote:
Carl,
Very good, I
Jim Gerke [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Gary,
I swapped the two 6AU6's (V3 V11) and the transmitter started working.
Swapped them back and it quit. Using another 6AU6 I quickly determined
that
Jim Gerke [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Just a quick update regarding the replacement meters
I ran into a bit of a snafu in obtaining the correct parts for the
shunts needed for the new
Hello Jim... I have been working on the same thing... Currently, I have the
50uA meter installed in a Drake WV-4 with a ten turn pot for calibration and,
it's working very well... All that I need to do is read the resistance of the
shunt and see I if I can locate presision resistors to
Hello Jim... The presision resistors are @ 1% and the original meter is at
5%, there shouldn't be a problem... The internal calibration should be able
to make up for any difference in the individual meters... 73's, Charlie...
- Original Message -
From: Jim Shorney
To:
At a + or - 5%, (original Drake spec) that should not be a problem..
- Original Message -
From: Jim Shorney
To: [EMAIL PROTECTED]
Sent: Tuesday, March 04, 2008 12:22 AM
Subject: Re: [drakelist] Replacement Meters
Jim Shorney [EMAIL PROTECTED] made an utterance to the
Jim Shorney [EMAIL PROTECTED] made an utterance to the drakelist gang
--
wb4yqv wrote:
Hello Jim... The presision resistors are @ 1% and the original meter
is at 5%, there shouldn't be a problem... The internal calibration
18 matches
Mail list logo