unted types and Rien - PA0TRT the
horizintal mounted models.
Carel - PA0CMU.
Date: Sun, 13 Dec 2009 01:10:47 -0500
To: drakelist@zerobeat.net
From: epy...@indy.rr.com
Subject: Re: [Drakelist] TR7 Help please
You need one Bourns 1k pot 3296W-1-102LF for the 10 volt adjustment, and 5
Bourns 10k
described in the manual.
This is not a guarantee that the TR7 needs a complete aligment yet, but I think
it's the best way to replace the pots.
Good luck,
Carel - PA0CMU.
> From: ree...@btconnect.com
> To: drakelist@zerobeat.net
> Date: Fri, 18 Dec 2009 09:23:34 +
Hi all,
For a DIY board extractor, see this:
http://members.ziggo.nl/cmulder/drake.htm#bookmark9
Good luck,
Carel - PA0CMU
> From: jshor...@inebraska.com
> To: drakelist@zerobeat.net
> Date: Wed, 6 Jan 2010 16:09:18 -0600
> Subject: Re: [Drakelist] tr-7 readout
r the puller for the DR-7 board
or something that could be used in its place.
73's
dale wt4t
-Original Message-----
From: Carel PA0CMU
To: Drakelist
Sent: Thu, Jan 7, 2010 2:50 am
Subject: Re: [Drakelist] tr-7 readout replacement
Hi all,
For a
try.
Carel - PA0CMU.
> Date: Mon, 1 Feb 2010 02:31:07 -0800
> From: wd8...@yahoo.com
> To: drakelist@zerobeat.net; epy...@indy.rr.com
> Subject: Re: [Drakelist] TR-7 PBT 10K Pots
>
> While poking around my power supply board this weekend with my intermittent
>
nents. Excuses for the minor
layout of the website,
I'm working on a complete new XHTML/CSS design that comes soon. If you have any
questions drop me an e-mail.
Carel - PA0CMU.
> On Sat, 01 Jan 2011 13:49:51 -0500, Richard A. (Tony) Stalls wrote:
> >My TR7 drifts around 100-150 Hz P
"Carel, PA0CMU" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Gerry and gang,
The URL in your email is not correct and causes a 404 error. The correct
link is:
http://home.wanadoo.nl/cmuld
Hi all,To improve the audio response of the TR7, Rien PA0TRT designed a
switched capacitor lowpass filter using Maxim's MAX7400.You can read all about
it on the Drake page on my website.For a direct
link:http://home.wanadoo.nl/cmulder/drake.htm#bookmark7Some pictures of the
filter will be added
Carel PA0CMU <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Garey,
Not only the demodulator circuit was changed.
1. Drake made some minor changes in the S-meter circuit. R1101 is replaced by
two 1N4148
Carel PA0CMU <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Garey - K4OAH wrote:
> Your link below refers me to your Host's "lost" page. Perhaps it's
> referring to a TMP fold
"Carel, PA0CMU" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Hi all,
From the estate of a friend, PA3BBT, I got a TR7 (serial no. 3157) and PS7.
All his amateur equipment was kept in boxes for ne
"Carel, PA0CMU" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Oep...
In my message about the TR7 mode switch problems, I used the word "thumb"
instead of "thump" or
"Carel, PA0CMU" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Hi all,
The problem of the mode switch thump has been found.
On the early version of the 2nd IF/Audio Board, R1187 doesn't exist.
"Carel, PA0CMU" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Hello Vic,
It might be the powerline wiring from the on/off switch on the front panel
to the connector on the rear panel. The 60
"Carel, PA0CMU" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Vic,
Try this:
- disconnect the AC-line!
- remove the PS7 control cable on the rear panel of the TR7
- make a temporary connection with
"Carel, PA0CMU" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Hi Dieter and group,
Unfortunately, I don't remember which transistor it was. It most likely was
located on
the 2nd IF / Audio
"Carel, PA0CMU" <[EMAIL PROTECTED]> made an utterence to the drakelist gang
--
Kevin,
I should have one spare somewhere because I improved the power supply unit
and the audio amplifier. Consider that improvement
"Carel, PA0CMU" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Hi all,
If you have visited the Drake forum during the Hamvention in Dayton, you
might not have a solid copy of the callsign pointi
"Carel, PA0CMU" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Hi all,
I just saw that the access to my homepage is denied by the provider. An
'Error 403 page' is shown in stead of my
"Carel, PA0CMU" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Hi all,
Due to limited ammount of traffic that is allowed for my website, I asked my
son to set up a mirror of my main website (whi
20 matches
Mail list logo
