Add DT entries for the second DWC3 USB host, which is limited to the
USB2.0 (HighSpeed), and the corresponding QUSB PHY.
Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 55 ++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi
b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index cca56f2fad96..17a1877587cf 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1270,6 +1270,20 @@ qusb2phy: phy@c012000 {
status = "disabled";
};
+ qusb2phy1: phy@c014000 {
+ compatible = "qcom,sdm660-qusb2-phy";
+ reg = <0x0c014000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+ nvmem-cells = <&qusb2_hstx_trim>;
+ status = "disabled";
+ };
+
sdhc_2: sdhci@c084000 {
compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
reg = <0x0c084000 0x1000>;
@@ -1375,6 +1389,47 @@ opp-384000000 {
};
};
+ usb2: usb@c2f8800 {
+ compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
+ reg = <0x0c2f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>,
+ <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core",
+ "mock_utmi", "sleep";
+
+ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <60000000>;
+
+ interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq";
+
+ qcom,select-utmi-as-pipe-clk;
+
+ resets = <&gcc GCC_USB_20_BCR>;
+
+ usb2_dwc3: usb@c200000 {
+ compatible = "snps,dwc3";
+ reg = <0x0c200000 0xc8d0>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+
+ /* This is the HS-only host */
+ maximum-speed = "high-speed";
+ phys = <&qusb2phy1>;
+ phy-names = "usb2-phy";
+ snps,hird-threshold = /bits/ 8 <0>;
+ };
+ };
+
mmcc: clock-controller@c8c0000 {
compatible = "qcom,mmcc-sdm630";
reg = <0x0c8c0000 0x40000>;
--
2.35.1
