On Thu, Jan 09, 2014 at 11:25:38PM +0800, Shawn Guo wrote:
Yea, adding all four into imx-drm crtcs works for imx6q, but it doesn't
for imx6dl, because ipu2 is unavailable for imx6dl at all.
Here is how I get around it.
Thanks, I've rolled your change into this commit now.
--
FTTC broadband
On Tue, Jan 07, 2014 at 04:59:35PM +0800, Shawn Guo wrote:
On Thu, Jan 02, 2014 at 09:28:03PM +, Russell King wrote:
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index e75e11b36dff..0e005f21d241 100644
---
On Tue, Jan 07, 2014 at 05:29:55PM +0100, Philipp Zabel wrote:
Thanky you. This is what I came up with so far:
From: Philipp Zabel p.za...@pengutronix.de
Subject: [PATCH 1/2] staging: imx-hdmi: use RX_SENSE0 for plug detection if
HPD is unreliable
On some boards HPD might not reliably
Am Montag, den 06.01.2014, 19:31 -0700 schrieb Eric Nelson:
Hi Russell,
On 01/06/2014 10:46 AM, Russell King - ARM Linux wrote:
On Mon, Jan 06, 2014 at 06:41:28PM +0100, Philipp Zabel wrote:
Hi Eric,
Am Freitag, den 03.01.2014, 12:14 -0700 schrieb Eric Nelson:
This is an issue we've
Am Dienstag, den 07.01.2014, 08:30 -0700 schrieb Eric Nelson:
Hi Philipp,
On 01/07/2014 04:29 AM, Philipp Zabel wrote:
Am Montag, den 06.01.2014, 19:31 -0700 schrieb Eric Nelson:
Hi Russell,
On 01/06/2014 10:46 AM, Russell King - ARM Linux wrote:
On Mon, Jan 06, 2014 at 06:41:28PM
Hi Eric,
Am Freitag, den 03.01.2014, 12:14 -0700 schrieb Eric Nelson:
This is an issue we've seen before. The SABRE Lite board has
a voltage divider on the HPD pins and some monitors (esp. DVI
monitors) either don't drive things high enough to assert HPD or
bounce with connect/disconnect.
On Mon, Jan 06, 2014 at 06:41:28PM +0100, Philipp Zabel wrote:
Hi Eric,
Am Freitag, den 03.01.2014, 12:14 -0700 schrieb Eric Nelson:
This is an issue we've seen before. The SABRE Lite board has
a voltage divider on the HPD pins and some monitors (esp. DVI
monitors) either don't drive
Hi Russell,
I've tested this series on a BD-SL (SabreLite) with HDMI. Right now
the HPD signal doesn't seem to work, but after overwriting the
connection check, I got a stable and correct picture on the monitor:
arch/arm/boot/dts/imx6q-sabrelite.dts | 22 ++
1 file changed,
On Fri, Jan 03, 2014 at 05:48:57PM +0100, Philipp Zabel wrote:
Hi Russell,
I've tested this series on a BD-SL (SabreLite) with HDMI. Right now
the HPD signal doesn't seem to work, but after overwriting the
connection check, I got a stable and correct picture on the monitor:
Hmm. Does this
Am Freitag, den 03.01.2014, 17:07 + schrieb Russell King - ARM
Linux:
On Fri, Jan 03, 2014 at 05:48:57PM +0100, Philipp Zabel wrote:
Hi Russell,
I've tested this series on a BD-SL (SabreLite) with HDMI. Right now
the HPD signal doesn't seem to work, but after overwriting the
On Fri, Jan 03, 2014 at 06:26:44PM +0100, Philipp Zabel wrote:
Am Freitag, den 03.01.2014, 17:07 + schrieb Russell King - ARM
Linux:
On Fri, Jan 03, 2014 at 05:48:57PM +0100, Philipp Zabel wrote:
Hi Russell,
I've tested this series on a BD-SL (SabreLite) with HDMI. Right now
Hi Philipp,
On 01/03/2014 10:26 AM, Philipp Zabel wrote:
Am Freitag, den 03.01.2014, 17:07 + schrieb Russell King - ARM
Linux:
On Fri, Jan 03, 2014 at 05:48:57PM +0100, Philipp Zabel wrote:
Hi Russell,
I've tested this series on a BD-SL (SabreLite) with HDMI. Right now
the HPD signal
Use the componentised device support for imx-drm. This requires all
the sub-components and the master device to register with the component
device support.
Signed-off-by: Russell King rmk+ker...@arm.linux.org.uk
---
arch/arm/boot/dts/imx51-babbage.dts| 10 ++-
13 matches
Mail list logo
