Hello,
I had a Yaesu FT1000D working one time with dx4win. Now I have another and am
getting "Radio timed out" message.
Using K1NU interface and keying works fine. Also everything works in Writelog
no problem.
Settings Address = 00 with default checked
Baud rate =4800 with default checked
Poll rate =5000
DTR high = not checked
RTS high = checked
I am on Com one same as with Writelog.
Someone please remove my blinders!
Thank you for any help.
73,
Bob, K5BG
From [EMAIL PROTECTED] Sun Jul 29 14:55:13 2007
From: [EMAIL PROTECTED] (Randy Farmer)
Date: Sun Jul 29 15:04:29 2007
Subject: [Dx4win] FT1000D
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
>I had a Yaesu FT1000D working one time with dx4win. Now I have
>another and am getting "Radio timed out" message.
>Using K1NU interface and keying works fine. Also everything works in
>Writelog no problem.
>Settings Address = 00 with default checked
> Baud rate =4800 with default checked
> Poll rate =5000
> DTR high = not checked
> RTS high = checked
>I am on Com one same as with Writelog.
I don't use COM keying, so I'm not sure, but I'd check the settings
on the DX4WIN Preferences CW tab. You need to specify there if the
DTR or RTS line is being used to generate the CW. You may be sending
the CW on the control line that needs to be on continuously to power
the interface unit. If the interface is powered from DTR line, you
should have that box checked and the RTS line set for keying in the
CW setup window. Be sure these settings are "harmonized".
$20 or so will get you a WinKey that avoids all those problems. at
the expense of another COM port or a cheapo USB to RS-232 converter.
I highly recommend this solution.
73...
Randy, W8FN
