Hello
DXCC checkers have received an email from NC1L confirming this info.
There is a procedure to follow to have it credited if the card was
submitted before.
73
Paul F6EXV (ex 7O8AA)
-Message d'origine-
De : dx4win-boun...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net] De la
PLease help.
I installed into my FLYBOOK the new release 8.01. The installation run
correctly, but when I launch it the X error message appear.
APPLICATION NOT CORRECTLY INIZIALIZED (0xc0150002). PRESS OK TO CLOSE
IT
Tried many times, same error.
Can you explain it? The FLYBOOK is working under
My card was submitted to the DXCC desk and then bounced for the lack
of docs. NC1L says I still have to resubmit the card itself a second
time (either directly or through a checker). There used to be a
procedure where ARRL HQ would remember disallowed cards you had
submitted so if they were
Hi Folks
BTW. I got back to the previous version on same computer and same configuration
and the problem does not exist.
Must be a bug??
Oms
-Mensagem original-
De: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Em
nome de py5eg
Enviada em: quarta-feira, 12 de
Hi Doug:
Yes, but there is no doubt that there is a bug on version 8.01
Thanks for the comments
73
Oms PY5EG
-Mensagem original-
De: dx4win-boun...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net] Em nome de Doug
Enviada em: quarta-feira, 12 de agosto de 2009 17:22
Para:
Hi Mel:
I never had any problem in sending CW directly from the computer using
no interface in the previous version.
No other SW I'm using Win Test, Writelog, and N1MM is reproducing this
problem.
Why when I get back to version 7.07 the problem disappear, in the same
configuration???
Oms
Rick,
I also encountered problems tracking frequency with certain USB CI-v
interfaces and DX4Win. Troubleshooting was made more difficult by the fact
that some worked properly with my contest software (N1MM) but not with
DX4Win. This bug was evident in v7, and probably still lingers in v8. You
On Thu, Aug 13, 2009 at 7:40 AM, Larry Gauthier (K8UT)k...@arrl.net wrote:
Rick,
I also encountered problems tracking frequency with certain USB CI-v
interfaces and DX4Win. Troubleshooting was made more difficult by the fact
that some worked properly with my contest software (N1MM) but not
Also on ARRL WEB is an information!
73,
Milos, OK1MP
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.52/2298 - Release Date: 08/12/09
18:12:00
__
Dx4win mailing list
Is there any set to avoid FREQ field in the QSO window being populated?
--
73 DX de PY2YP - Cesar
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post:
On Thu, Aug 13, 2009 at 4:58 AM, ik1MDFik1...@aruba.it wrote:
PLease help.
I installed into my FLYBOOK the new release 8.01. The installation run
correctly, but when I launch it the X error message appear.
APPLICATION NOT CORRECTLY INIZIALIZED (0xc0150002). PRESS OK TO CLOSE
IT
Tried many
This bug has been reported... it's an issue with a missing library...
here is the fix from K8UT:
I downloaded and installed DX4W801 and encountered an error message upon
launching the program:
The application failed to initialize properly (Oxc0150002). Click OK to
terminate the application
Most
As I said in my message transceive is turned off
Sorry... missed that. Is there anything else polling the Icom? Some
hardware does... for example Microham interfaces. I had to disable
polling from my Palstar tuner and also set disable router queries on
my Microham interface to get everything
On Thu, Aug 13, 2009 at 9:07 AM, Melve...@videotron.ca wrote:
As I said in my message transceive is turned off
Sorry... missed that. Is there anything else polling the Icom? Some
hardware does... for example Microham interfaces. I had to disable
polling from my Palstar tuner and also set
OK, we get it. There's a bug in 8.01. Let's stop discussing it, and
give Paul time to find and fix it.
73 - Jim AD1C
On Thu, Aug 13, 2009 at 4:52 AM, py5egpy...@iesa.com.br wrote:
Hi Mel:
I never had any problem in sending CW directly from the computer using
no interface in the previous
Disable your radio interface. I can't understand why you wouldn't
want this information.
73 - Jim AD1C
On Thu, Aug 13, 2009 at 5:54 AM, PY2YPpy...@py2yp.com wrote:
Is there any set to avoid FREQ field in the QSO window being populated?
--
73 DX de PY2YP - Cesar
--
Jim Reisert AD1C,
Good on ya Jimhere here!!
..and is Frequency not sort of important in a log book??
Just my humble view...D
- Original Message -
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: dx4win@mailman.qth.net
Sent: Thursday, August 13, 2009 5:20 PM
Subject: Re: [Dx4win] RES: RES: dxw 8.01
VC1W in August 2009 is via VE3EXY
VC1W was used before in July 2007, that operation via VE1RGB
73 - Jim AD1C
--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home:
Hi JIm
You don´t need to be so nervous!!!
Oms
De: dx4win-boun...@mailman.qth.net em nome de Jim Reisert AD1C
Enviada: qui 13/8/2009 13:20
Para: dx4win@mailman.qth.net
Assunto: Re: [Dx4win] RES: RES: dxw 8.01 BUG? key board
OK, we get it. There's a bug in
Perhaps because there is an outstanding issue with Frequency messing up
filters for non-US stations?
mel...
Jim Reisert AD1C wrote:
Disable your radio interface. I can't understand why you wouldn't
want this information.
73 - Jim AD1C
On Thu, Aug 13, 2009 at 5:54 AM,
I use a Microham interface... it uses USB and virtual ports and works
fine. So some USB interfaces do work.
Heinz Goeddemeier wrote:
I had a similar problem. My old notebook Compaq EVO N800v doesn't have an
COM interface, so I tried to use an USB- COM interface from Belkin FSU109. I
used it
Hi Oms and others who have problems with hardware,
First of all 100 % of every connection
Between DX4WIN and hardware (radio´s - keyers - bandecoders - rotators -
steppIR etc)
have been tested out by me and reported to Paul if all was ok or not.
Tests are done on 5 different Pc´s/Laptops with
Look for GEMBIRD USB to SERIAL cables , they can handle all soft
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Mel
Verzonden: donderdag 13 augustus 2009 20:36
Aan: Heinz Goeddemeier
CC: 'DX4WIN'; 'Rick
Here is a suggestion.
I decided to try a conventional FTDI USB to serial converter I have
here. It works fine. It's the one Dennis sells on his website at
http://www.hosenose.com/interfaces.asp#USB-RS232 for his logging program.
You could try one of those... at least you know it has been
Hi Guy,
Interesting And this sidebar gadget is?Maybe a
Vista only feature?
73,
Bob
K2TK
ON4AOI wrote:
Hi Oms and others who have problems with hardware,
Snipped:
On my running station (QUADCORE) with vista ultimate I watch the CPU usage
all the time (sidebar
In preferences|radio
Changing the poll rate and Max tries could help also
Guy ON4AOI
-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
boun...@mailman.qth.net] Namens Mel
Verzonden: donderdag 13 augustus 2009 21:27
Aan: Robert Morris; DX4WIN
Onderwerp:
One more suggestion
$3.99 incl shipping.
http://cgi.ebay.com/USB-2-0-to-Serial-RS232-DB9-9pin-Adapter-Cable-PDA-GPS_W0QQitemZ220461832158QQcmdZViewItemQQptZPCA_Cables_Adapters?hash=item33548c97de_trksid=p3286.c0.m14
__
Dx4win mailing
Not to rain on your parade Henrik... but that would be another untested
interface. I recently bought 2 Bluetooth adapters from a Chinese source
on eBay. One was dead and the other lasted less than 10 minutes. They
did send me 2 replacements and they work fine so-far...
I also had a Chinese $10
You might want to read this:
http://www.rttycontesting.com/usb
I have the microHam unit. No problems with IC-756 Pro III, I have
Transceive turned off, and am running at 9600 baud with a 1000 mS
poll rate.
73 - Jim AD1C
--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
If the way you have kept track of frequency, Name and/or QTH does not lend
itself to the automatic conversion by DX4WIN 8.01 or the QSXFIX program of
Jim's (AD1C), I may be able to help. If you were fairly consistent in how you
kept track of the information (Freq,Name and QTH), I can
Paul *is* working on a smarter algorithm. I've seen some of his
results (impressive).
73 - Jim AD1C
On Thu, Aug 13, 2009 at 3:04 PM, Lee Hallin hall...@lanecc.edu wrote:
If the way you have kept track of frequency, Name and/or QTH does not lend
itself to the automatic conversion by DX4WIN
I didn't find a shortcut key to show up the bandmap. Is there one?
--
73 DX de PY2YP - Cesar
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post:
Right-click on DX Spots window, select BandMap.
This is in the help file if you search the index for the word band.
73 - Jim AD1C
On Thu, Aug 13, 2009 at 3:12 PM, PY2YP py...@py2yp.com wrote:
I didn't find a shortcut key to show up the bandmap. Is there one?
--
73 DX de PY2YP - Cesar
--
I will have to re qsl as I canot find my rejected card..
anyone know the qsl route??
yes would be nice if rejected/submitted cards could now be counted as
they were
previously in there hands and they know itoh well dx is.
Dick Flanagan wrote:
My card was submitted to the DXCC desk and then
Via DJ3XD for all QSOs. They are having more cards printed.
On Thu, Aug 13, 2009 at 3:23 PM, Bob de Grippo kr...@bellsouth.net wrote:
I will have to re qsl as I canot find my rejected card..
anyone know the qsl route??
--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
Bob,
Sounds like they may post the QSOs on LOTW (for those inclined!)
Moore said that the DXCC Desk will work with the 7O1YGF team to use Logbook
of the World (LoTW), if possible.
73
Lou N2TU
-Original Message-
From: dx4win-boun...@mailman.qth.net
Just be aware that Paul is doing something as we speak. perhaps we
should see how that works out. If he adds any more complexity to the
regex expressions he is working on... the program may become self-aware ;-)
Lee Hallin wrote:
If the way you have kept track of frequency, Name and/or QTH
...and W3UR already announced that the logs would be in LoTW within a
fortnight.
In a message dated 8/13/2009 4:38:43 P.M. Central Daylight Time,
n...@roadrunner.com writes:
Bob,
Sounds like they may post the QSOs on LOTW (for those inclined!)
Moore said that the DXCC Desk will work
Jim is correct. I handle the cards for VC9W (2005), VC2W (2006),
VC1W (2007), and VC1T (2008) but only for the IOTA contest dates during
those years. Those calls have been assigned to other stations on non-IOTA
events. Not my fault! Lots of cards left for all except VC2W which are
So Jim,
to day I have completed the import of all groups (002 - 003 - 004)
in the I0MWI_TEST.DXL and I found another anomaly.
48,275 QSOs in the Original Log.
48,225 QSOs in the Destination Log.
50 QSOs LOST.
I have verified carefully the two logs.
The algoritm have considered DUPES some QSOs with
Besides assigning a shortcut key to show-up the Bandmap, perhaps ALT-B,
I'd suggest an extra checkbox with the option: always on top which
should avoid the bandmap being hidden by other windows. By the way the
ALT-B should hide the bandmap too.
--
73 DX de PY2YP - Cesar
Maybe I've missed it, but is there a procedure in Version 8.01 to move
frequency information for the Notes for this QSO field to the new Freq
field? Or are folks just exporting to an ASCII file, editing, and re-importing?
tnx es 73 - John, W4AU
Hi John,
It's in the Help file, search for Frequency in the index.
Or just try QSO - Multiple QSO Operations and you'll find it.
73 - Jim AD1C
On 8/13/2009 7:33 PM, John Unger wrote:
Maybe I've missed it, but is there a procedure in Version 8.01 to move
frequency information for the Notes
On Thu, Aug 13, 2009 at 7:40 AM, Larry Gauthier (K8UT)k...@arrl.net wrote:
Rick,
I also encountered problems tracking frequency with certain USB CI-v
interfaces and DX4Win. Troubleshooting was made more difficult by the fact
that some worked properly with my contest software (N1MM) but not
Hi Oms,
I tried to test this, but I realized that I have a WinKey interface,
and it doesn't have the problem. I do not have COM or LPT ports on my
ham computer.
Can someone else who is using a COM or LPT port interface for the CW
keyer please test this?
Oms, are you using a COM port or a LPT
Oms, in the CW preferences tab, what are your settings? I don't
understand how you can be using a sound card to send CW.
On Wed, Aug 12, 2009 at 9:08 AM, py5egpy...@iesa.com.br wrote:
I'm noticing something very strange on the cw keyboard function.
When using the keyboard the first two
some worked properly with my contest software
Without knowing more about the code it might not be quite that simple.
The problem is CI-V collision detection as implemented assumes no data loss
other than via collision. This assumption can break down in there are
hardware issues... If Paul
Jim,
I tested sending CW from the keyboard with no problem. I simply use DX4WIN
as the device type and LPT1 as the port. Works great in both versions 7.07
and 8.01. The first two letters are not being joined. Using Windows XP.
Dave, N4QS
- Original Message -
From: Jim Reisert
Interesting Dave. I tested using a COM port and the first two letters
are joined in 8 but not in 7 as Oms reported. It seems the problem is
when using the COM port only. BTW... using XP Pro. It works fine with a
Winkey interface... but that's to be expected as the Winkey chip is
formatting the
Is anyone else getting the lines flickering horizontally across the band map
screen when I scroll up and down? Thanks- John
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
DX and CONTEST CLUB: http://www.w9idx.com/
AOL IM: W9RPM
YAHOO: W9RPM
50 matches
Mail list logo