Hi to all.
I have 3 contact with P29 PAPUA.
- I put P29... in CALLSIGN FIELD
- P29 ENTITY STATUS WINDOW APPEARS
- I DOUBLE CLICK ON M BOX to see the QSOs done.
- ONLY 2 APPEAR
- THE LAST ONE DEAS NOT APPEAR.
-CHECKED THE LOG... THE QSO EXIST.
Please help
This happen also for other entities.
73
- Original Message -
From: ik1MDF
To: dx4win@mailman.qth.net
Sent: Tuesday, January 12, 2010 12:40 PM
Subject: seeking Entity logged...
Hi to all.
I have 3 contact with P29 PAPUA.
- I put P29... in CALLSIGN FIELD
- P29 ENTITY STATUS WINDOW APPEARS
- I DOUBLE CLICK ON M BOX to see the
Searched the archives but could not find the answer to this simple(?)
problem - I'm unable to key the IC7800 using the PSK31 function in DX4WIN
7.05.04. I am able to decode signals, but can't figure out what I'm doing
wrong on transmit. Here's the set-up:
IC7800 + Navigator (in
Hi,
I need some help with this error-message on a county-report.
When I want to make a county-summary report I go to:
Reportgenerator county summary.
then always the following error-message pops up:
An exception occurred: Access violation at address 00402D42 in module
'dx4win802_1.exe'.
It seems you have some mistake in your county file.
I would suggest to update to 803. I think that 803 will not crash and you
will find your mistake.
73 Kostas sv1dpi
- Original Message -
From: Dieter Schuster dl...@web.de
To: dx4win@mailman.qth.net
Sent: Tuesday, January 12, 2010 6:37
Dear Lorenzo
Maybe you have your wokred or mailed cutoff date too old. See under
filepreferencespersonal tab.
Another thought is that maybe the other qso is in a different group or you
have make a selection which makes it.
73 Kostas sv1dpi
- Original Message -
From: ik1MDF
I use a COM port to control PTT with my 7700. It is the same setup I
used with my older IC781. Newer Icoms like the 7700 and 7800 can switch
to transmit under software control via the CI-V bus but I don't think
D4W supports it yet... or if it does, I don't know how to make it work.
David M.
Thanks to US Interface/Navigator's Clint Hurd, KK7UQ, for resolving my issue
- how to key the PTT line when using DX4WIN's PSK31 capability. By
telephone, Clint patiently reviewed all my comm port settings and
methodically worked through to a solution (including downloading DX4WIN
8.03). The
My bandmap freq reading constantly changes.
As an example: It will read the freq in MHz
such as 18,076.28 and then switch to
1,807,628.00. Back and forth. If I add a QSO
and the freq readout is extended, it won't enter.
I have the radio set to 756PRO and defaults.
Any suggestions?
Tnx, Art
Slight edit to what I said above. Message should read as follows:
Thanks to US Interface/Navigator's Clint Hurd, KK7UQ, for resolving my issue
- how to key the PTT line when using DX4WIN's PSK31 capability. By
telephone, Clint patiently reviewed all my comm port settings and
methodically
On Tue, Jan 12, 2010 at 3:47 PM, Art - W6KY w...@yahoo.com wrote:
My bandmap freq reading constantly changes.
As an example: It will read the freq in MHz
such as 18,076.28 and then switch to
1,807,628.00. Back and forth. If I add a QSO
and the freq readout is extended, it won't enter.
I
I have started working on DX4WIN.CTY #74. You can read the release notes here:
http://www.country-files.com/dx4win/release.shtml#74
Again, I appreciate all the contributions of Alan, G3PMR of Club Log.
I will probably release this country file Thursday evening local time,
(Friday morning
(1) Is there a way to lock the column widths in the window Same Call? I
have made the box the same size as my Country Zone boxes and have
tried to shorten the Time, Band Mode columns which allows me to see the
3 QSL confirmation columns. (With the addition of all the new lines in
the QSO
13 matches
Mail list logo
