HI Guys fixed it just set the window to 4 metres rts off all works fine
now
but it is a white noise band hi
Dave GM3WIL
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help:
HI,
I have set up the transverter mode on 10 metres and the offset 42,000 the
plan is to use 4 metres
my IC746 tunes 28+42 gives 70 MHz
the IC 746 works on all the bands but when I select 4 metres from the band
map DX4WIN logs 4 metres and then switches back to 28 MHz .
what am I
Hi
I'm having a problem with my IC7800 going on to SSB on 30 metres from
packet spots
It should be cw .
Is there a map/band/mode setup I can use .
Dave GM3WIL
__
DX4WIN mailing list
Home:
I have had to resort to using vpe virtual comports my COM3 with freq/Mode
data is directed to COM10 a virtual splitter
All works well but sometimes the DX4WIN thinks I'm on 1296 when on 30 metres
then switches back to 30m
I have to use the virtual comport to split the com3 data to my
HI ,
My IC7800 qsy s fine on spots on but I notice the split is not put into
the rig only the rx freq
I have a IC775 it puts the rig into split mode and the tx freq was also
Is there a new driver for the 7800 ver 3 .
Dave GM3WIL
Hi when I click on spots only on 30 metres cw spots switch my radio to
SSB rtty is ok it is switched to rtty for rtty conacts
But cw spots switch my radio to SSB
If I remember there is a database showing cw/ssb band info I think this is
where I need to edit ,
But I can't remember where
Hi guys tks all working now
Dave GM3WIL
-Original Message-
From: Kjell W. Strom [mailto:strom.l...@xs4all.nl]
Sent: 09 March 2014 13:41
To: 'Dave Cossar'; dx4win@mailman.qth.net
Subject: RE: [Dx4win] 30 metres
Dave,
Files Preferences QSO CW frequency cutoff 30 m
Increase to any
HI Guys.
I notice that when LOTW is being uploaded it will not accept RTTY or any
other mode but SSB CW and Data but there is no Data mode in the Mode
window so how is this done?
DaveGM3WIL
__
DX4WIN mailing list
Home:
Thanks Dave that should do the trick
Dave GM3WIL
-Original Message-
From: Dave Perry [mailto:n...@comcast.net]
Sent: 01 February 2014 17:16
To: 'Dave Cossar'; dx4win@mailman.qth.net
Subject: RE: [Dx4win] LOTW
Dave,
I have over 12,000 RTTY QSOs uploaded to Lotw from DX4WIN. You might
HI
My DX spots 9DXCC) sorted by callsign is greyed out
I usually use this window to qsy my rig , it still does qsy the rig
It wasn't like this before it looks like a setup function has changed.
Dave
GM3WIL
__
DX4WIN
They will be greyed out on bands where you have already worked them.
Sent from Samsung tablet
Dave Cossar davecos...@btinternet.com wrote:
HI
My DX spots 9DXCC) sorted by callsign is greyed out
I usually use this window to qsy my rig , it still does qsy the rig
It wasn't like this before it looks
Hi All,
Fixed it my config was indeed corrupted
Thanks all
Dave GM3WIL
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This
OK now I have the comports working and checked using other prog it has
revelled anther prob.
Using Win 7 32 bit dx4win ver 8.03
The CW keyboard, well it latches on the TX and the only way out is to come
out of DX4WIN
It sends no CW just puts the TX on permanently
Now my Comports and TX
is for security in cafes etc were
you can read everybody's emails..
Dave Cossar,
GM3WIL
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win
Hi all.
I have tried 8.02 it locks up as well. On the CW keyer
Ver 801 is fine of course they all work well on XP
Using window 7 home premium to make it stop working
Dave GM3WIL
__
Dx4win mailing list
Home:
_
From: Dave Cossar [mailto:davecos...@btinternet.com]
Sent: 28 February 2010 13:44
To: 'dx4win@mailman.qth.net'
Cc: 'davecos...@btinternet.com'
Subject: Comports
Hi,
I'm still looking for a solution to my comport problem.
DX4WIN runs fine on XP
Without touching any
Hi Guys,
I forgot to mention on my computer I have a one real comport
all works
when I use it.
Trouble is I need more than this one, I prefer to use a separate port for
the CW port TX/RX, and the Transceiver operations freq and mode
Oh! And another one for TX/RX for RTTY
I have
Hi,
I just remembered wasn't there a file that had to be added to DX4WIN was
it Vish.dll or something to make the comports work. or is that all been
fixed in Ver 8.03
__
Dx4win mailing list
Home:
H iGang,
I managed to figure what is going on and got all my comports working all 5
of them
Windows 7 managed to rename my comports wrongly
Got them all sorted out and edited the XP ones in the Com port advanced mode
So XP and Win 7 all have the same Com numbers
Dave GM3WIL
Just noticed when on SSB I now have a choice of 3 numbers for the =
report
I don't expect to give 599 on ssb .the only way round this to TAB to =
the next field.
Before in ver5 when 2 charactars where pressed whilst on SSB the cursur =
moved it's self.
Why is this ? will there be a fix ?
Dave
20 matches
Mail list logo