David,
You need to do the following:
Set up several com ports in the MH router. In my case, I use com5, 6, 7, 8.
In the router on the ports tab, select a com port to control the radio
with. I use com5.
Click the set button next to com5 and select the radio from the list.
Assuming the MH
F10 actually updates the record for that call and moves to the next record.
Page Up/Down moves back and forth among QSOs with the same call without
updating.
I am using the version prior to the one just released so if there is a
difference it's probably in the new release.
Also, F2 will move to
David,
I have the same settings. Also, DTR and RTS both high. Polling 5000 ms.
Works fine under 7.03.16. Used to work fine under earlier versions as
far as I remember.
I am going through a MicroHam MicroKeyer but that shouldn't make a
difference.
Les W2LK
David Warr wrote:
Hello,
I'm
I spoke to them at Dayton. Steve said there is a new release with a few fixes
that can be downloaded. I am at the airport on the way home so I have not been
able to look for it yet.
73, Les W2LK
-Original Message-
From: Ove Friman - SFØF [EMAIL PROTECTED]
Sent: May 17, 2008 12:49 PM
I have a lot of QSOs to print labels for but I want to print QSOs for
only one call.
When I get set to print it says I have a lot instead of the four I want.
I cannot figure out how to print labels for only the call I need.
Has anyone done this?
Les W2LK
From [EMAIL PROTECTED] Sun Dec 23
You might want to go to this URL: http://dx4win.ad1c.us/cluster.htm
where you can download the latest update to the cluster file. Just
replace the existing file and edit the new one.
73, Les W2LK
[EMAIL PROTECTED] wrote:
Tony,
Seems simple now you have explained it!
Thanks for your
Glen,
I have always used a UPS with all my PCs. After getting creamed once or
twice by power outages I found that the cost of one of these is worth
it. I use APC which have a connection to your PC via serial or USB. The
included software shuts your PC down gracefully in case of failure but
if
Back up up your log.
Do a search (F8) for QSOs with the UPL CONF flag set to yes. Then
QSO|Multiple QSOs Operation|Set Confirmed Flag|Yes.
This will set all the selected QSOs to Yes for both.
73, Les W2LK
Karl Oyster, K1KO wrote:
With the advent of LOTW there have been lots of qsls which are
Has anyone printed directly on a QSL using an HP LaserJet 6? Will this
printer accept QSL sized stock?
Les W2LK
Roger D Johnson wrote:
[EMAIL PROTECTED] wrote:
Cesar and Group
I use a laser printer to direct print on the QSL cards.
I have used an inkjet in the past. It prints a less
I have tried printing 5160 labels from DX4win 7.02 on several printers
and this problem exists with all of them. I made up a custom label
through trial and error and have reasonable results but there is still a
bit of print creep from the first to the last label on a sheet. My
dimensions are:
What worked for me was:
Set a filter for the specific date of the QSO; filter|selection, then
set a date range filter with the same start end date.
Once you have that filter set, F8 to find the call. You should get only
that call for the label run. If you get more than the one label to be
Dave,
I believe that if you create and use a date filter starting with the
effective 1975 date for CW credits and then do your submission, you will
see only those cards from that date to the present. If you do more than
one type of submission at a time you may have to remove or change the
John,
I believe I have read there is a com port speed issue with the Orion II.
Some Orion IIs actually run closer to 56000 not 57600 like they are
supposed to. Judging from what you are reporting, it might be worth
trying to change the comport speed in DX4WIN.
File|preferences|radio|baudrate,
Paul,
Any chance of removing the L. It is information that is available
elsewhere and simply confusing in reports and summaries.
I think it is valuable information in a detail report but not in a
summary, particularly when you have to keep remembering to add it in
when calculating totals.
73,
So I just upgraded over the weekend with no issues but I have 7.02 build
12. Does this mean I have to upgrade again?
Les
ON4AOI wrote:
Bill and other users you can see the number
On top of DX4WIN just before your license
DX4WIN 7.02.13 ON4AOI Guy Dewaelhens
73 Guy ON4AOI
BAND DECODER
Mike,
Just reset the upload flag to Y for the QSOs you want to upload. When you do
the upload, the date will change to the new date.
73, Les
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mike Bondarev
Sent: Thursday, March 09, 2006 3:58 PM
To:
Hello all,
I want to create a single band WAZ submittal. No matter what I do, using
submit on the WAZ reports menu results in a lot of QSOs flagged.
I have done a 20M only filter but the WAZ submittal doesn't seem to care.
I wound up creating the submittal manually by filtering on 20M, then
John,
What am I missing in your question?
All LoTW QSOs are available for checking by the ARRL without physically
submitting a card for that QSO. The downloaded ADIF file is imported with
Imported QSO Sets Upload Confirmed Flag which will set the Upl Cnf to Y.
For a submission, you need
I have recently put together a PC using an Asus V7A880 MB Asus Video card
1 MB of RAM.
It includes a Conexant modem, CD/DVD R/W drive and Serial ATA HD using Win
XP Pro. I have put together many PCs in the past but none with the problems
I have experienced with this one.
With XP and all the
John,
Mine uses Com1 and Preferences|Control|Rotator Control is set to Orion M2,
ThunderForm|ARSWIN. Works perfectly.
Your Com port should be set to 9600,8,1,N.
Les W2LK
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of John Kjos
Sent: Sunday, August 07, 2005
Tony,
GO to http://www.ad1c.us and check the DX4win section. Jim has an excellent
tutorial on how to do it the best way.
You should creat a new, empty log file and import your old log file to it
and merge your country file from the old to the new version. After you are
done with any of the other
In V7, the MMTTY window opens OK along with the RTTY control window.
However, the control window opens as a separate window outside of DX4WIN.
It will not stay visible upon clicking in any other window including typing
in the MMTTY window. It can be brought to the front by clicking on an
exposed
Contact DX4WIN. They will most likely send you a key for V7 at no cost.
The order sheet and instructions are in the Docs directory for V7.
73, Les W2LK
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Vassilis Orfanos
Sent: Tuesday, May 31, 2005 10:04 AM
To:
interfaces at
http://www.on4aoi.be/keyer.htm
ARSWIN link and related stuff at
http://www.on4aoi.be/web7.htm
DXTELNET soft and related stuff at
http://www.on4aoi.be/dxt.htm
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Les Kalmus
Sent: Monday, May 30, 2005 4
I am using DX4WIN with a microHam keyer and Orion.
In trying to get MMTTY set up (not working yet), there is a blank screen
that appears with the title of RTTY Window.
It opens each time I start the program and I cannot close this screen. I
have been able to minimize it but not close it. This is
I did a download from LOTW which I do every few weeks. This time I got a
message saying there were 2 confirmed QSOs not in my log. These could be
from older contests which were done maually not entered into DX4WIN.
How can I find which these were and what happened to them?
Thanks,
73, Les W2LK
Hello all,
I did the IOTA test using N1MM and exported that log in ADIF for input to
DX4Win.
The QSOs imported OK except for the IOTA info. DX4Win has created IOTA data
where it could but this is for a small percentage of the data. The IOTA data
for each QSO is in each record.
Can anyone tell me
I use them in 6.02. They work.
73, Les
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of ARS NZ3O (Byron)
FM29fx
Sent: Wednesday, July 21, 2004 9:47 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] SWL Labels
I'm getting the impression that no one uses
Hello all,
I am using V6.02. Can anyone tell me where I can find an up to date IOTA
file? Will this file work for 6.03?
TIA.
73 Les W2LK
Pete,
Assign a Group number to the QSOs you make with the new call.
The title you assign to the number can print as an identifying message on
labels when you print that group number.
73, Les
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Pete Smith
Sent:
Phil,
Using Windows Explorer, go to Program Files on your C drive. Find the
dx4win602 folder. In this folder you will find another folder called
Save. Open Save. You will find a file called dx4win.cty and one called
w3gt.dxl.
Copy these 2 files to another device to back up. To do that, right
Eric,
Make sure you are clicking on the main DX4Win window, not just the file
window.
Try this: Click anywhere on the main window and type Alt-F4. This is the
same as clicking on the x but without using the mouse.
If it still hangs it is probably a windows problem. 95 and even 98SE
have
32 matches
Mail list logo
