The DX4WIN Award database was updated on 14 October 2014.
It contains 201 awards. This is a link to the release notes:
http://dx4win.ad1c.us/awards/index.html#3.45
You can download a ZIP file of the database from:
http://dx4win.ad1c.us/awards
But it's easier to use the DX4WIN Data
Installed DX4Win.updater and all set!
On 6 October 2014 22:42, dx4win-requ...@mailman.qth.net wrote:
Send DX4WIN mailing list submissions to
dx4win@mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/dx4win
or,
Hi all
It is very very frustrating to see that there is absolutely no
information on upcoming updates on the main program.
It would be quite easy to say either there will be no updates, or to say
which points are being worked on for next update.
If there will be improvement, I would like to see
I had same thoughts about 3 years ago. My guess is DX4WIN is nearing
end-of-life. I was an early adopter. I've since moved one to HRD.
My 2 cents.
Bob
-Original Message-
From: Paul F6EXV
Sent: Saturday, September 06, 2014 3:14 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win
DX4Win has been motionless in respect to program improvements for many years
now, probably six or seven. The update from v7 to v8 was pretty much useless as
the digital inclusion never was successful.
I moved from WJ2O in 2004, when DX4Win was pretty much state of the art, at
least in terms of
,
Dave, N4QS
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Ernie
Walls
Sent: Saturday, September 06, 2014 6:27 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN UPDATE
DX4Win has been motionless in respect to program improvements for many
@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN UPDATE
DX4Win has been motionless in respect to program improvements for
many years
now, probably six or seven. The update from v7 to v8 was pretty much
useless
as the digital inclusion never was successful.
I moved from WJ2O in 2004, when DX4Win was pretty
On 9/6/2014 12:22 PM, Barry wrote:
P.S. I'll use whichever software AD1C uses and selflessly supports :-)
Amen to that!
Garry NI6T
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
I've used DX4WIN for years with no problems. Have looked at others,
but few ... any? ... will track US
Counties for CQ's award. That's a must for me.
73
K0PP
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
an excellent program and it's free! Shh...!
73,
Dave, N4QS
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Ernie
Walls
Sent: Saturday, September 06, 2014 6:27 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN UPDATE
DX4Win has been motionless
...@mailman.qth.net] On Behalf Of Dick
Flanagan
Sent: Saturday, September 06, 2014 4:39 PM
To: DX4WIN Reflector
Subject: Re: [Dx4win] DX4WIN UPDATE
Just as an FYI:
DXLab can import a DX4WIN log. All you have to do is convert it to ADIF
and then import it. It can also compare your log with LOTW and flag
Thanks, Joe!
Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Joe
Subich, W4TV
Sent: Saturday, September 06, 2014 5:41 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN UPDATE
You've
The DX4WIN Membership List was updated on 3 September 2014.
http://dx4win.ad1c.us/data/calldata.html#Member
You can get the latest version using the DX4WIN Data Updater:
http://dx4win.ad1c.us/updater
This release includes callsigns that should be eligible for extra
points in the ARRL
The DX4WIN Award database was updated on 3 September 2014.
It contains 201 awards. This is a link to the release notes:
http://dx4win.ad1c.us/awards/index.html#3.44
You can download a ZIP file of the database from:
http://dx4win.ad1c.us/awards
But it's easier to use the DX4WIN Data
The DX4WIN Master Callsign database was updated on 3 September 2014. It
contains 212033 callsigns and was generated by Club Log on 27 Aug 2014.
http://dx4win.ad1c.us/data/calldata.html#Master
You can get the latest version using the DX4WIN Data Updater:
http://dx4win.ad1c.us/updater
Jesse, KA8YYZ had the solution.
See below.
73,
Bud W3LL
-Original Message-
From: Jesse Wall
Sent: Tuesday, August 19, 2014 3:33 PM
To: Bud Governale
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN Missing Windows
Hello Bud,
Go into the preferences, select the screen
Hello, guys!
I wonder who is using DX4WIN with Icom RS-BA1 remote control software for
CAT control?
There are only one virtual COM port on RS-BA1 and I can't link DX4WIN to
this port (I've got error message - device already open)/ How can I share
this COM-port with my logging software?
With best
The DX4WIN Award database was updated on 31 July 2014.
It contains 201 awards. You can download a ZIP file from:
http://dx4win.ad1c.us/awards
But it's easier to use the DX4WIN Data Updater:
http://dx4win.ad1c.us/updater
The ZIP file also contains a number of membership list files
On Sat, Jul 26, 2014 at 2:51 PM, Thomas Schwinn w4...@bellsouth.net wrote:
Thanks for the tip but still no luck. The links on the DX4WIN Updater page
don't seem to get me where I need to go. For example, clicking on the
following link:
Version 6.09 the Updater Program was released on 6
Hi Tom,
This thing happens sometimes with other programs. Just switch-off and re-start
the PC and normally it should work.
73, Radi F6GNZ
Le Samedi 26 juillet 2014 3h30, Thomas Schwinn w4...@bellsouth.net a écrit :
Hello all,
I tried to start the DX4WIN Data Updater program this morning
: Saturday, July 26, 2014 4:58 AM
Subject: Re: [Dx4win] DX4WIN Updater Program Won't Run
Hi Tom,
This thing happens sometimes with other programs. Just switch-off and re-start
the PC and normally it should work.
73, Radi F6GNZ
Le Samedi 26 juillet 2014 3h30, Thomas Schwinn w4...@bellsouth.net
.
From: Thomas Schwinn w4...@bellsouth.net
To: dx4win@mailman.qth.net dx4win@mailman.qth.net
Sent: Friday, July 25, 2014 6:29 PM
Subject: [Dx4win] DX4WIN Updater Program Won't Run
Hello all,
I tried to start the DX4WIN Data Updater program this morning but was not
successful
.
Thanks again!
73, Tom, W4NBS
From: Art - W6KY w...@yahoo.com
To: Thomas Schwinn w4...@bellsouth.net; dx4win@mailman.qth.net
dx4win@mailman.qth.net
Sent: Saturday, July 26, 2014 11:17 AM
Subject: Re: [Dx4win] DX4WIN Updater Program Won't Run
Working fine here
Hello all,
I tried to start the DX4WIN Data Updater program this morning but was not
successful. A double-click on the icon yielded nothing nor did trying to start
it from within Windows Explorer work.
I'm running Win 7, Home Premium, SP 1; 64 bit, DX4WIN V8.05.
I deleted the program and
Is there another copy of the updater already running? If it's running but
not showing up on your desktop it's possible that you just need to open the
window running the updater.
I'd try alt-tab to see if you can open it, followed by a reboot to see if
it works afterwards.
73,
-Rick
On Fri,
Hi Folks,
As I wrote on July 11, I'm in the midst of a huge country file
update, trying to reconcile differences with the database in Club
Log.
I'm still working on this - it's been a HUGE project. Even though the
work to identify differences is automated, resolving those differences
takes
Jim,
I think I speak for everyone on here - we can't thank you enough for
everything you do. I would prefer that you take the most efficient course
- I can wait on the IOTA updates.
73, Bud N7CW
On Fri, Jul 18, 2014 at 6:26 AM, Jim Reisert AD1C jjreis...@alum.mit.edu
wrote:
Hi Folks,
As
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dennis
Petrich
Sent: Friday, May 30, 2014 10:08 AM
To: Jim Reisert AD1C; DX4WIN Reflector
Subject: [Dx4win] DX4WIN Band Decoder not responding
Hi guys,
I am trying to setup the Band Decoder window in File/Preferences/Control
Is the LPT driver installed? You have to do that at install time to make
the port work.
73...
Randy, W8FN
On 5/30/2014 10:08 AM, Dennis Petrich wrote:
Hi guys,
I am trying to setup the Band Decoder window in
File/Preferences/Control but none of the items in that window, Type,
LPT Port or
Thanks Dave, I am in Expert mode... I will keep looking
-Original Message-
From: Dave Perry
Sent: Friday, May 30, 2014 12:56 PM
To: 'Dennis Petrich'
Cc: DX4WIN Reflector
Subject: RE: [Dx4win] DX4WIN Band Decoder not responding
Dennis,
I am using a Top Ten Devices band
-Original Message-
From: Randy Farmer
Sent: Friday, May 30, 2014 8:50 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN Band Decoder not responding
Is the LPT driver installed? You have to do that at install time to make
the port work.
73...
Randy, W8FN
On 5/30/2014 10:08 AM, Dennis
Hi Duane,
I am not sure if it works with the new Flex-6500, but I am using DX4WIN
configured for Flexradio in the Preferences, address 00, 57600 bps, 800ms
polling, DTR ON and it works fine with my Genesis G11 SDR controlled with the
Power-SDR compatible software GSDR. You have to create a
Hello Duane, no black magic! I have been running DX4WIN with my 6500 for
over 8 months If you have any setup issues just let me know.
Dennis, k0eoo
-Original Message-
From: Duane Calvin
Sent: Saturday, May 24, 2014 9:56 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN
I've made a scary (for me) change to the station here at AC5AA. I've moved
from my TenTec Orion to a FLEX-6500 running SmartSDR software. Has anyone on
the list made DX4WIN and Smart SDR / CAT work together? If so, was there
any black magic involved, or was it fairly straightforward? In making
Thanks Jim,
After doing a more detailed search I discovered about half the errors were
due to a bad frequency in the Freq (khz) box and the other half were bad
calls. The bad calls were actually years of Armed Forces Day calls such as
WAR, AIR, NNVR, NMC, NBM, etc, etc. I log them the same as
On Fri, May 16, 2014 at 1:44 PM, ALAN ZACK k7acz wrote:
I have now submitted 26,254 LOTW QSO's for K7ACZ with 12,394 QSL matches. I
know many DX stations don't use LOTW so I won't have a match. But what if I
messed up the time or freq and that is why there is no match? Is there an
easy way to
Ref: DX4WIN ver 8.05 and LOTW TQSL ver 2.0.1
I recently made a submission to LOTW using the instruction by Jim AD1C:
WORKING WITH LOTW and DX4WIN
I got many error messages tagged as ERROR: FREQUENCY 0.01431 (and other such
freq notations) IS OUT OF RANGE FOR BAND 20M ON LINE xxx
Alan, I think that's the best you can do. The program for
signing/uploading logs does compare the BAND against the FREQUENCY if
both fields are present in the ADIF file, and reports errors if they
don't match, as you saw. In your case, you'll have to assume BAND
field is correct.
Are these from
When I came into the shack this morning the computer had restarted
sometime last night and had a message up that it had recovered from a
serious error.
Now when I try to restart dx4win I get the message: an exception
occurred duplicate key = 1218 at line 159912
Simplest thing is to rename/move your DX4WIN.CFG file then re-start
DX4WIN. See if that fixes the problem.
On Sat, Apr 19, 2014 at 1:54 PM, Michael C. Goode good...@att.net wrote:
When I came into the shack this morning the computer had restarted sometime
last night and had a message up that
I've released DX4WIN Data Updater v. 6.09. If you run your current
updater, you should get the new one automatically. Or you can download
the installation program from here:
http://dx4win.ad1c.us/updater/download/dx4wupd_v6.09_20140406.zip
This is a relatively minor update:
6.09 -
@mailman.qth.net
Sent: Saturday, April 5, 2014 9:57 PM
Subject: [Dx4win] DX4WIN Data Updater v. 6.09 released
I've released DX4WIN Data Updater v. 6.09. If you run your current
updater, you should get the new one automatically. Or you can download
the installation program from here:
http
Hi all,
are there DX4WIN users out there, using DX4WIN in combination with the
TRX-Manager ??
Would like to use both, the one for controlling and DX4.. for logging!
Any Hints, any Ideas??
MNI TNX
73!
Helmut, OE1MHL
__
DX4WIN mailing
LinkedIn
Luis Camacho has indicated you are a Friend
--
Since you are a person I trust, I wanted to invite you to join my network on
LinkedIn.
Accept invitation from Luis Camacho
This is something new...
Enter a callsign, hit ALT-A to spot the station and the Split is not
picked up. Running an Elecraft K3. Did I change something by accident?
Barry W2UP
__
DX4WIN mailing list
Home:
A friend just called me and asked this question.
He is considering buying a new PC with
Windows 8.1 or 8.2
He is currently running DX4WIN ( version 8 something I beleive )
Are there any issues getting DX4WIN to run install with Windows 8.2
Glenn VA3DX
On 2014-02-24 2:27 PM, Glenn Wyant wrote:
A friend just called me and asked this question.
He is considering buying a new PC with
Windows 8.1 or 8.2
He is currently running DX4WIN ( version 8 something I beleive )
Are there any issues getting DX4WIN to run install with Windows 8.2
I updated the DX4WIN Membership List on 13 February 2014:
http://dx4win.ad1c.us/data/calldata.html#Member
You can get the latest version using the DX4WIN Data Updater.
This release includes callsigns that should be eligible for extra
points in the ARRL Centenary Challenge. They will show
*Paul- THe last email here addresses the DX Cluster lists. It should
give U one near U in So. Cal.
73 Dave
*
On 2/7/2014 12:00 PM, dx4win-requ...@mailman.qth.net wrote:
Send DX4WIN mailing list submissions to
dx4win@mailman.qth.net
To subscribe or unsubscribe via the World Wide Web,
Thanks Kostas! I'll try your solution .
Best 73 de Luis, CT4NH
On 1 February 2014 18:14, dx4win-requ...@mailman.qth.net wrote:
Send DX4WIN mailing list submissions to
dx4win@mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
Hi Terry,
The only difference compared to your settings is
In my setup DTR = High
And the following doesn´t matter for the driver
Poll rate I reduced to 500 and max tries is 3
Guy ON4AOI
-Oorspronkelijk bericht-
Van: Terry Hines [mailto:trthi...@verizon.net]
Verzonden: dinsdag 28
LinkedIn
Howard Klein has indicated you are a Friend
--
I'd like to add you to my professional network.
- Howard Klein
Accept invitation from Howard Klein
Jamie, I am using an 18 month old FT5000 and it works fine. With the 5000
you must set the data rate in the menu 32, 33, 34 and 35 all address the CAT
function in the 5000. Be sure these are set to match the DX4WIN settings in
preference file
Good Luck,
Bill, K5ZQ
-Original Message-
My version 6 DX4WIN does not have a slot for
60 meter qsos.
We now have those privilages here...
I assume newer versions of DX4WIN have it ??
Glenn VA3DX
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
...@sympatico.ca
To: dx4win@mailman.qth.net
Sent: Thursday, January 23, 2014 3:32 PM
Subject: [Dx4win] DX4WIN
My version 6 DX4WIN does not have a slot for
60 meter qsos.
We now have those privilages here...
I assume newer versions of DX4WIN have it ??
Glenn VA3DX
Version has 60M. Dan/KI6X
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Glenn Wyant
Sent: Thursday, January 23, 2014 3:33 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN
My version 6 DX4WIN does not have a slot for
60
I recommend using BV7 QSL print manager. It is VERY flexible and has large
choice of label configurations. Just export DX4WIN log in ADIF and import into
BV7.
It is free and available from: http://www.df3cb.com/bv/
73, Radi F6GNZ
Le Jeudi 16 janvier 2014 3h57, G rigel...@sympatico.ca a
, 15 Jan 2014 21:21:27 -0500
From: G rigel...@sympatico.ca
To: dx4win@mailman.qth.net
Subject: [Dx4win] dx4win log QSL PRINING
Message-ID: blu0-smtp720e5378b259b227e9b539f5...@phx.gbl
Content-Type: text/plain; charset=us-ascii
Hello to all
I have near 300 QSLS to print from about 30,000
Hello to all
I have near 300 QSLS to print from about 30,000 in my dx4win logbook.
I do not want to print from sequence or flag system.
But instead cruzing thru the log and from a SPECIFIC QSO asking to dx4win
to print that one and continuing like that ...is that feasable ?
My printer
I updated the DX4WIN Membership List on 13 January 2014:
http://dx4win.ad1c.us/data/calldata.html#Member
You can get the latest version using the DX4WIN Data Updater.
This release adds callsigns that should be eligible for extra points
in the ARRL Centenary Challenge. They will show up in
DX4WIN Wish List
PSK63 support (not a great PSK user, but PSK31 is just too slow).
Thank you Paul
73
Steve
GW4BLE
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I've noticed since I've updated to Windows 8.1 that sometimes, not all the
time, when I click on the X to shut down DX4WIN it does not shut down. All
the windows turn a pale grey and it just sits there.
In order to shut down DX4WIN in this state I have to do an END TASK in the
task manager.
Anyone
On Mon, Dec 16, 2013 at 4:26 AM, Radivoj Kar, F6GNZ f6...@yahoo.com wrote:
Jim,
Superbe, it worked FB and I've got the 6.08 updated by running 6.07.
But, please let us know what mean these GREEN/YELLOW/RED fields during
update.
It's a progress indicator showing how much of the download has
On Mon, Dec 16, 2013 at 7:13 AM, Radivoj Kar, F6GNZ f6...@yahoo.com wrote:
Thanks. I was afraid that RED meant an error in download !
I'll try to change the colors in the next update.
- Jim
--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
On Sun, Dec 15, 2013 at 12:39 PM, Radivoj Kar, F6GNZ f6...@yahoo.com wrote:
Also, during update of Custom Awards, Country files.. the horizontal update
time line shows GREEN squares, then next portion is YELLOW and after some
time the rest is RED. What does it mean???
It's a progress
From my ISP:
Yep, this morning from about 5am-6am MST, box was up/down, fighting a
high load issue.
--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home:
We're looking into the issue.
The default timeout in the program is way too long (180 seconds). I
have a pending change to make it 10 seconds, but that obviously
doesn't fix the root problem.
--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
I've released DX4WIN Data Updater v. 6.08. If you run the updater,
you should get it automatically. Or try a manual download from here:
http://dx4win.ad1c.us/updater/download/dx4wupd_v6.08_20131216.zip
There are some issues with the server right now, so this may be a
catch-22. I can''t
Jim/Joe - I have tried to connect the Omni using db25 to db 25 on my winxp
computer. DX4Win does not see radio. Tried using db25-db9 on computer and
rigblaster advantage and still says cant see radio. Did all the tests again
using writelog with same results. Ten tec offered no help. All I'm trying
Hello Paul,
First I must say, I have been a DX4WIN customer for over 15 years and am very
happy with DX4WIN. Currently my radio of choice is the Flex6500 and with this
new radio there seems to be some features of DX4WIN that are not working as
with the Flex5000A... I hope you will resolve
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
- Original-Nachricht
Betreff: Re: [Dx4win] DX4WIN and Linux
Datum: Wed, 27 Nov 2013 20:55:55 +0100
Von: Giorgio Borgo gborgo...@web.de
An: wb3...@verizon.net
Hello Ron,
running DX4WIN (now 8.05) for several years under ubuntu
I have been using DX4WIN version 6.03 with Windows XP and Vista for some years
without any problems. Now I have Windows 8.1 and I have tried to load the
program from the disc and get the message port driver not found. In the FAQ
section of the help files it says to refer to the Appendix files
You may have seen a release of the contest country files today. Don't
worry, DX4WIN will also be coming. I still have a bit of work to do
on the QSL manager database. I hope to get the files out on the 19th.
approx 15z.
73 - Jim AD1C
--
Jim Reisert AD1C, jjreis...@alum.mit.edu,
Hello,
Just wondering if it is possible to run the DX4Win program in a Linux OS?
Thanks for all replies.
73
Ron
WB3AAL
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help:
...@cableone.net
To: dx4win@mailman.qth.net dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN and K3
Message-ID:
cajao1leqk9xu1ss8br8xfwuu_vs8tswyzmacm7umkyjtks7...@mail.gmail.com
Content-Type: text/plain; charset=windows-1252
Wayne,
Mine works fine. Are you using the X4 version of the radio control
I’m having a problem getting my K3 and DX4WIN to set the split freq. from the
cluster.
Is anyone else seeing this?
It sets the freq on the 2nd VFO and does not turn on the [ ^f ] light.
Is this a bug. I have transmitted on the DX freq a few times and sometimes
nicely
and sometimes rudely told
Wayne,
Mine works fine. Are you using the X4 version of the radio control
software?
73, Bud N7CW
On Mon, Nov 11, 2013 at 9:47 AM, n2wk n...@rochester.rr.com wrote:
I’m having a problem getting my K3 and DX4WIN to set the split freq. from
the cluster.
Is anyone else seeing this?
It sets
Thanks to all for the clarification (? :-) ?) ) about Z6 (Kosovo).
Keep tuned...
73 de Luis, CT4NH
On 26 October 2013 17:00, dx4win-requ...@mailman.qth.net wrote:
Send DX4WIN mailing list submissions to
dx4win@mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
With my previous post, I was hoping to produce
a discussion of improvements needed in DX4Win,
and we have a reasonable start. Some comments
for a couple of the replies:
To Joe, W4TV, I respectfully disagree. In 54
plus years of hamming I have found things that
work for me. My suggestion of how I
Subject: Re: [Dx4win] DX4Win wish list (In addition to xmmt.ocx)
With my previous post, I was hoping to produce a discussion of improvements
needed in DX4Win, and we have a reasonable start. Some comments for a couple of
the replies:
To Joe, W4TV, I respectfully disagree. In 54 plus years of hamming I
Maybe I am silly because I reply to the same question a number of years
without response...
Anyway... I like to add to K0CF list, omnirig support.
This adds flexibility and solves a number of problems as
1. support for new radios (dx4win is also back on this),
2. co-operation with pst rotator
I am on the air since 1991.
I am using dx4win since december 1997 (release 1.07 if i remember well).
I think that this software is just perfect.
My wish list is limited to an improvement of CAT.
I know that is a very hard job but in my opinion is the only part that can be
discussed.
I saw easy
I certainly would also. 73 John W9RPM
On 10/12/2013 5:46 AM, PY2YP wrote:
That is fair. I do second you.
73 DX de PY2YP - Cesar
On 12/10/2013 07:43, GW4BLE wrote:
.. I guess it takes time and effort to upgrade DX4WIN, I'd gladly
chip in and pay
whatever for an upgrade.
Steve
GW4BLE
Forgot support for FTDX3000 as the other logging programs have.
On 10/12/2013 10:52 AM, W9RPM wrote:
I certainly would also. 73 John W9RPM
On 10/12/2013 5:46 AM, PY2YP wrote:
That is fair. I do second you.
73 DX de PY2YP - Cesar
On 12/10/2013 07:43, GW4BLE wrote:
.. I guess it takes
DX4Win is certainly due a refresh. My wish
list (in addition to xmmt.ocx support) for
the next release includes the following:
QRZ.com XML data subscription support in the
F3 Callsign/Mgr Lookup window. This is LONG
OVERDUE! Having to use a callbook CD is so
archaic and annoying, since they are
Proper logging of split frequency operation.
The Frequency box should always be the receive
frequency, i.e. the frequency that the DX is
transmitting on. The QSX (transmit) frequency
should be logged in a field separate from the
current Frequency box only if operating split.
(It is
clogging up the Packet Network with some spots that no
one else might care about.
TNX/73, Bob K8BL
From: K0CF k...@mchsi.com
To: DX4WIN@mailman.qth.net
Sent: Friday, October 11, 2013 12:28 PM
Subject: [Dx4win] DX4Win wish list (In addition to xmmt.ocx)
DX4Win is certainly due a refresh. My
to start logging - why?
73! Mike R3BM
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of K0CF
Sent: Friday, October 11, 2013 8:29 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] DX4Win wish list (In addition to xmmt.ocx)
DX4Win
Thanks to all for their suggestions. Each was just a bit different (or
at least as I read them), and most worked.
It certainly wasn't intuitive.
73,
Eric W3DQ
Washington, DC
On 10/7/2013 12:00 PM, dx4win-requ...@mailman.qth.net wrote:
Send DX4WIN mailing list submissions to
Communication between IC7600 and DX4WIN 8.05 . Connection via TTL Cat interface
and communicates . However when I go to the PSK Mode it shows in ' DX4WIN '
window ' SSB' instead of PSK31 ' . I turn to RTTY , RTTY will appear correctly
.
Anyone an idea ?
Cel, ON6UQ
-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens Marcel ON6UQ
Verzonden: maandag 23 september 2013 20:44
Aan: DX4WIN
Onderwerp: [Dx4win] DX4WIN Mode problem
Communication between IC7600 and DX4WIN 8.05 . Connection via TTL Cat
interface and communicates . However when I go
On Sun, Sep 15, 2013 at 9:35 PM, Andy - UA0BA ua...@yandex.ru wrote:
Can I make it so that the program had DX4VIN Update worked through
proxy-server.
I don't know, I'd have to research this. I'll make a note of it.
--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
Hello to ALL !!!
Can I make it so that the program had DX4VIN Update worked through
proxy-server.
Thanks !
Good luck!
73! de Andy/UA0BA
in Norilsk ( RDA KK-66 )
ua...@yandex.ru
ua...@norcom.ru
ICQ: 11727506
__
DX4WIN mailing list
Bent,
Use CTRL-E for the notes editor and remove the text.
Same for 'notes for this call'
73
Marcel ON6UQ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Bent,
Use CTRL-E for the notes editor and remove the text.
Same for 'notes for this call'
73
Marcel ON6UQ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
LinkedIn
Howard Klein requested to add you as a connection on LinkedIn:
--
Dx4Win,
I'd like to add you to my professional network on LinkedIn.
- Howard
Accept invitation from Howard Klein
: zaterdag 7 september 2013 7:54
Aan: dx4win@mailman.qth.net
Onderwerp: Re: [Dx4win] DX4WIN + ic 7800 + OM2500A
Hello Oms
Sorry but I have not understand well your configuration and the problem you
have.
Normally CIVl is connected between radio and computer. I believe it works ok
this way.
When you
801 - 900 of 1876 matches
Mail list logo
