Courtney,
You might be referring to the article I wrote about using a key mapper to import from WSJT-X directly into DX4WIN. That works great, but is a bit more involved to setup. For basic importing between WSJT-X and DX4WIN, this is what I recommend: 1. You do not have to run WSJT-X and DX4WIN at the same time. You can keep DX4WIN closed until you finish with WSJT-X. You can then close WSJT-X and open DX4WIN anytime you want to import QSOS. Another way is to keep DX4WIN open but turn off the radio connection by clicking on Radio, Stop Radio. Then start WSJT-X -- but only WSJT-X will be connected to the radio. After making a few QSOs in WSJT-X, you can import directly from WSJT-X into DX4WIN while it is not connected to the radio. See steps 3 and 4 below. You can reconnect DX4WIN to the radio any time by first closing WSJT-X and then clicking on Radio, Start Radio in DX4WIN. A bit awkward, but workable. 2. A better solution is to install Win4K3Suite so that you can have WSJT-X and DX4WIN connected to the radio at the same time. Win4K3Suite costs about $50, but it is worth the investment. Once you install it, you also have to create some virtual com ports using com-0-com. This takes a little doing, but is not too hard. Actually, very simple once you get familiar with it. By using Win4K3Suite, I keep WSJT-X and DX4WIN up and running all day with both connected to my K3. There is now a WinK4Suite if you have a K4 and it is also available for the other major radio brands. Well worth the time and investment. 3. Importing the ADIF file from WSJT-X into DX4WIN is rather simple. The only catch is remembering where the ADIF file is stored in Windows. I solve this by mapping a drive to the folder that stores the file. I just go into Windows Explorer, click on Computer at the top, and then Map Drive. Windows will automatically assigned a letter for the new mapped drive like X or Y or Z. You then have to select the folder where the ADIF file for WSJT-X is stored. It is normally found by clicking on Local Disk (C:), Users, then click on the user you are normally logged in as, App Data, Local, WSJT-X. Once you have found and selected the WSJT-X folder, click OK to finishing setting up the mapped drive. It will tell you what letter you are using for the new WSJT-X drive. 4. Once you have a mapped drive setup to the WSJT-X log folder, you can then go into DX4WIN, click on File, Import, ADIF will be highlighted at the top, click on File again, Import again, then select This PC on the left, and the mapped drive that you setup will be shown at the top, double click to open, and then select wsjtx_log.adi. The new import window will be displayed showing Options for duplicate QSOs. You always want to select the top choice -- Imported QSO is ignored. There will be a few more Oks to select and the import will complete. DX4WIN will only import new QSOs from the WSJT-X log file and dupes will be ignored. I have used the manual import process thousands of times over the last seven plus years. I have ten of thousands of QSOs stored in my WSJT-X log file, and DX4WIN just ignores all the dupes and again only imports the new ones. The import is virtually instantaneous. A couple of additional hints: 1. DX4WIN will automatically remember the location of the last file that you imported. Until you import some other file (like a download from LOTW), it will always go back to the mapped drive folder that you specified. When it does not, just go back and select MY PC and reselect the mapped drive as described above. 2. It seems that after a Windows update, DX4WIN will lose the mapped drive entirely. That is easily fixable by closing DX4WIN, opening Windows Explorer. The mapped drive for WSJT-X should be displayed at the bottom of the small window. I double click on the mapped drive to open it, and then close Window Explorer. I then restart DX4WIN and the mapped drive shows up again. This only happens about once a month so is not a big deal. 3. After you master all the above, the next big step is to automate all of the above with an automatic key mapper. I use a little app called Macro Recorder. It has the ability to capture all of your keys strokes from when you click okay to log a QSO in WSJT-X and then all of the manual keystrokes that you normally have to make to import the WSJT-X log into DX4WIN. So after I log a QSO in WSJT-X, I just hit the Insert key (my choice) and the key mapper takes over and completes the import of the QSO that I just logged into DX4WIN. Takes about 3 to 4 seconds. Works like a champ. I also use the key mapper to import QSOs automatically from JTDX. I have a second drive mapped for the JTDX log folder. This isn't really to hard once you get the hang of it. Of course, we all would love to have Paul implement an truly automatic way to import QSOs from WSJT-X into DX4WIN. This can easily be done by using the UDP broadcast function built into WSJT-X and many other leading logging programs, but not DX4WIN! Good luck! 73, Dave, N4QS -----Original Message----- From: dx4win-boun...@mailman.qth.net <dx4win-boun...@mailman.qth.net> On Behalf Of Courtney Judd Sent: Friday, March 24, 2023 10:06 AM To: dx4win@mailman.qth.net Subject: [Dx4win] wsjt Hey all, just got FT8 up and running here in the shack now and wondering on how best to get the logs from WSJT to DX4WIN ver 9.09. I googled it and found an interesting article by Dave N4QS but not sure if I am capable of setting this up. I struggle with Win 10 and my ham software .... just keeping it running smoothly is a on-going battle. So any help/ideas on how to set this up would be appreciated. I tried to have DX4WIN open at the same time with WSJT but ended up with rig control conflict so starting off bad already lol! Thanks, 73's Cort K4WI Sent from Postbox <https://www.postbox-inc.com> ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html