on 4-14-2010 8:33 AM Another_Newbie spake the following:
NoDough wrote:
Could be a million different things, but I'll start with a simple one.
Have you configured EFW to supply DHCP to the LAN
side?..
Thank you for your reply.
Yes I have, and the Dashboard
on 6-1-2009 2:01 PM Jake Ortman spake the following:
I've been out of town for a couple weeks, get back and see the new release.
Going through my inbox here (which is a bit packed), notice a few mentions
of the upgrade script but don't see anywhere how/where to run it.
Is there documentation
on 5-12-2009 1:57 PM forums forums spake the following:
Hi,
Thanks for the rapid answer.
I see what you're saying. I tried the below and got a lot further. I have it
set to requires authentication and local authentication and put the proxy
settings in IE. It works but it blocks all
5 root RT -5 000 S 0.0 0.0 0:00.00 watchdog/0
- Original Message -
From: Scott Silva ssi...@sgvwater.com
To: efw-user@lists.sourceforge.net
Sent: Friday, March 27, 2009 11:19:34 PM GMT +01:00 Amsterdam / Berlin / Bern
on 3-27-2009 3:02 PM Bart Heinsius spake the following:
That's a very small amount of ram. Is it using any swap?
Nope. Top says:
top - 23:01:40 up 31 days, 2:06, 1 user, load average: 0.10, 0.04, 0.01
Tasks: 52 total, 2 running, 50 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0%us,
on 3-6-2009 7:14 AM defrag4 spake the following:
I have a Gw2Gw Endian VPN setup; both sides are Endian. They are setup using
OpenVPN. This works great throughout the day but when I come back in the
morning I have to kill the connection and reconnect it via the firewall.
Once it reconnects it
on 2-25-2009 10:32 AM mxc spake the following:
Hi there,
We have a machine on the network that has been infected and is sending out
spam. The people responsible say the machine has been cleaned and
disconnected from the network but this is not the case. It seems they don't
know what they
on 2-19-2009 8:05 AM Allie Syadiqin spake the following:
Thanks for post, Mike. I confess that I barely understand what Mike is
telling me to do but turning off the hardware RAID is not something I
can consider.
I need a solution that will install and make Endian 2.2 work on this
server as it
on 2-19-2009 11:18 AM Allie Syadiqin spake the following:
Thanks for the suggestion, Scott. However, I have no prior knowledge in
running VMWare and it might a bit too much for me to handle. Although I
am the administrator of the servers here, I sort of came into this
position not because I
on 12-14-2008 2:26 PM Rafael Fonseca spake the following:
Just thought I'd give you guys a follow up to this one.
Turned out to be the motherboard slowing down if I put two sticks of
RAM on it. As soon as I removed one, it booted 2.1.2 (and then 2.2)
fine under 2 minutes. Tested all
on 11-26-2008 12:52 PM Guymon spake the following:
I still think the CPU is OK. I have ordered 2 1000mhz PIII to replace it(in
case), I have a slot for a second CPU so I will use it(my have to do a
reinstall of EWF). I don't think it's a capacitor issue, I know what to
look for in that, but
on 11-26-2008 11:26 AM Guymon spake the following:
I'll do a memtest tomorrow or this week-end when I can take the servers off
line. The Firewall is really not that old, the power supply is only a few
years old. The power supply might be getting overloaded, maybe that is the
problem, I can
on 11-23-2008 8:34 AM Mike Tremaine spake the following:
Igor Mikolic-Torreira wrote:
Mike Tremaine wrote:
Mike Tremaine wrote:
Igor Mikolic-Torreira wrote:
In reading stuff I found on the net, I've pretty much
convinced myself (perhaps wrongly) that the HID driver
itself is not loaded on
on 10-27-2008 10:31 AM Jihad_Joe spake the following:
Sorry, I diddn't mean to come off as rude. You guys are great. But how can i
turn of e-mail notifications? I just got like 3 more. I cant take it anymore
;)
That is how a mailing list works. You get copies of ALL posts.
--
MailScanner is
on 10-16-2008 8:20 AM ozgurerdogan spake the following:
Hello,
I have A class xx.xxx.xxx.16-31 ip addresses. ...16 is my gateway ip that I
entered in endian and 31 is my broadcast ip that I entered in endian but
when I enter 255.255.255.240 as subnetmask, I can not connect to endien from
on 10-14-2008 3:33 AM Rafal Sladek spake the following:
Hello,
I am using two Endians 2.1.2 in two cities (let's give them name A and
B), both location are connected via OpenVPN Net-to-Net. And there is one
MS Exchange 2003 as a backend server in city B. The are two different
networks, VPN
on 10-9-2008 10:22 AM Bhupesh Karankar spake the following:
Endian has much better feature then ipcop.
Use endian 2.3
Do you have something that no one else does?
Where can you get Endian 2.3 when 2.2 isn't even complete yet?
--
MailScanner is like deodorant...
You hope everybody uses it, and
on 8-8-2008 7:00 PM gtap spake the following:
using either a Via VT6120 rev42 or a realtek rtl8139 rev10, ping times
(obtained from EFW console) spike from roughly 25ms to google to around
300-500ms for extended periods of time, even with all incoming and outgoing
traffic from green disabled.
on 8-8-2008 8:32 AM Edmundo Robles L. spake the following:
Hi! Here is the output of ethtool with all the nics and the ifconfig
output, also i tried to switch the ethernet cable but i got the same
result, i can't reach the page :-(
Was a cable attached to any port when you ran that?
on 8-8-2008 9:40 AM Edmundo Robles L. spake the following:
Yes, it was attached, for that i am
-Mensaje original-
Attached to switch, or to another PC. And if to another PC did you use a
crossover cable?
--
MailScanner is like deodorant...
You hope everybody uses it, and
you
on 8-1-2008 8:48 AM Jorge Schrauwen spake the following:
I'm not sure but I think you can use the fedora rpm's to intall
development tools.
~Jorge
I think he means install the development tools on a SEPARATE box, not on your
firewall.
--
MailScanner is like deodorant...
You hope everybody
on 6-26-2008 5:26 PM � spake the following:
I also agree with Steven.
This is a serious problem.
The team of Endian not available the source code of the product and not how
far this is correct.
Look at the site of Endian that the development of version 2.1.1 is
available, that neither is
on 6-20-2008 8:06 AM Gustavo Villaran spake the following:
excuse me im kinda new to this, how do i apply those patches to the box?
Download the relevant packages, scp them to the efw box, ssh in and rpm -Uvh
them.
--
MailScanner is like deodorant...
You hope everybody uses it, and
you
on 6-18-2008 2:31 AM Gregory Machin spake the following:
Scott Silva wrote:
on 6-17-2008 1:00 AM Gregory Machin spake the following:
Hi
Where / how can I change the start up order. As havp and clamd are
using up 100% of the cpu resources for 5 min and non of the other
services are starting
on 6-17-2008 1:00 AM Gregory Machin spake the following:
Hi
Where / how can I change the start up order. As havp and clamd are using
up 100% of the cpu resources for 5 min and non of the other services are
starting until they are done. I would like to make them the last to
start so that the
on 5-29-2008 7:23 AM Mark Clarke spake the following:
Hi there,
I am using 2.1.2. I cant see an option on the gui? Where should I look?
You will need to use the RC or wait for the new version in a couple of weeks.
--
MailScanner is like deodorant...
You hope everybody uses it, and
you notice
on 5-27-2008 8:20 AM Marco Biovi spake the following:
Hi,
first of all sorry for my little english.
I have 3 EFWs in this configuration:
EFW2 ---vpn---EFW1---vpn---EFW3
Now, I can reach
EFW1 from EFW2 and viceversa;
EFW1 from EFW3 and viceversa;
but I can't reach EFW1 from
on 5-21-2008 9:03 PM Frank Fattizzi spake the following:
I have a newly installed Endian firewall and am unable to get VPN
connections from the internet to a Windows server located on green. I
have a number of other installations with a similar configuration that
work fine. Here is what I
on 5-12-2008 10:32 AM Mariano Sokal spake the following:
Hello from Buenos Aires, Argentina.
I would like to try the Community version of the software, however
before installing it there are some issues that I need some help.
1.- Is there a way to install an FTP server on the same machine that
on 5-12-2008 12:02 PM Mariano Sokal spake the following:
That is true...
However in case I want to install an FTP server, it`s just a matter of
downloading, compiling and opening the correct ports?
Regards,
Mariano Sokal
Endian does not have a compiler either. You would need to set up a
on 4-28-2008 12:31 PM Lars Oeschey spake the following:
Hi,
for testing I would like to install Endian on a VMWare Server, however
it fails, I just get a blue screen after hardware recognition. Anything
I should take care of regarding what controller etc. to use? I just took
default for now...
on 4-24-2008 4:44 AM Lars Oeschey spake the following:
On Thu, April 24, 2008 13:22, Marco Gabriel wrote:
as far as I know, there is no hardware compatibility list. but you can
just have a look in /boot/config to see which hardware drivers are built
into the kernel and which are available as
on 3-31-2008 2:47 PM codespinner spake the following:
Thanks, Bucky.
Can you give me some help with the second question regarding push options
for OpenVPN?
I think push option go into the servers config file, but you might have to
manually add them like ;
push route 192.168.0.0 255.255.255.0
on 3-6-2008 1:21 AM André Pohl spake the following:
Hi there,
ok ... I know, that 99% of the readers would kill me for this, but for our
company it is very important.
I need to configure efw pop3-spam proxy for bouncing spams
We get about 6000 (!) spams per day for 8 persons, thats to
on 2/14/2008 3:28 PM Mark Walmsley spake the following:
Feb 1^st beta
Why do I keep getting this error when I change the default policy to
content filter and scan.
Proxy is transparent ,
Authentication = none.
Then sometimes it says everything is turned on virus scanning ,
on 1/17/2008 5:37 PM Camilo Aguilar spake the following:
Hi,
Sorry for this dummy question.
I have vmware image of endian but in the page I do not found the root
password ?
Can anybody help me please ?
Regards,
Camilo
Did you try endian?
--
MailScanner is like deodorant...
You hope
on 1/9/2008 6:05 AM Anderson Alves spake the following:
Hello,
It would not be possible to use the url in HAVP's with https?
Tested using https://secure.eicar.org/eicar.com
Is this a question or an answer?
--
MailScanner is like deodorant...
You hope everybody uses it, and
you notice
on 1/9/2008 8:08 AM Anderson Alves spake the following:
sorry my bad english,
question !
It is usually not possible to scan anything in an encrypted session. The
process of the encryption will mask any signatures that could have been
detected.
This also goes for other protocols like pop3s
on 1/9/2008 4:22 PM Christopher Zeman spake the following:
I have a Windows machine that is connected to our company’s network and
our department’s network. Since our company only allows Windows machines
on their network, this machine is our department’s gateway to the
company network. It
on 12/13/2007 1:12 AM Deeter spake the following:
I cant build anything on that maschine, because there is not even make
installed with Endian.
But I found out, that Endian comes with the Smart Package Manager, so i
tried to use it to install madwifi, but I get errors everywhere, it seems
on 12/5/2007 3:12 PM toby spake the following:
No ports are blocked as this is a commercial T1 account. I have modem
connected to gigabit switch and devices needing public IPs are connected
to it and said devices are setup with static IPs from range given by
ISP. I will check to make sure I
on 10/29/2007 7:45 PM Tom Bishop spake the following:
OK the folks that I need to build this for do not have their own smtp
server they are using all pop3 access. I can I tell if the SPAM filters
are working and how long does it take to train. 2 more, i tried using
my gmail account
on 10/23/2007 5:50 AM Tom Bishop spake the following:
OK, weel I appear to have a proxy/content filter issue that I can't seem
to find a solution to. I have pc's behind the green interface a www
server behind the orange interface and of course the internet out of the
red. The green
on 10/23/2007 8:23 AM Tom Bishop spake the following:
Yes it is nat'd and port forward to the red side, I can access from the
outside, just not from the inside green domain. I haven't tried to
access it by the external IP, I'll give that a try.
Is there not a way to turn off the proxy
on 10/12/2007 11:16 AM Scott Silva spake the following:
on 10/7/2007 2:33 PM Scott Silva spake the following:
I have been trying to set up an EFW box to replace an ipcop box currently in
service. But I can't get the multiple IP Sec tunnels to work. I used the
exact
config from the ipcop
on 10/7/2007 2:33 PM Scott Silva spake the following:
I have been trying to set up an EFW box to replace an ipcop box currently in
service. But I can't get the multiple IP Sec tunnels to work. I used the
exact
config from the ipcop box but it will only allow one tunnel to connect.
Ip cop
on 10/8/2007 2:51 PM kreative spake the following:
postfix/smtpd[6341]: warning:
server3.cableforum.co.uk.blackhole.securitysage.com: RBL lookup error: Host
or domain name not found. Name service error for
name=server3.cableforum.co.uk.blackhole.securitysage.com type=A: Host not
found, try
on 10/5/2007 8:21 PM active trader spake the following:
Thanks Scott Silva. I seem to be able to ping the efw now, but when I try to
connect with my browser it says connection was refused both
http://192.168.0.145 and https://192.168.0.145:10443 .. Also, how do I
properly reply (again I ask
on 10/4/2007 7:37 AM turbo spake the following:
Hello compdoc, Marc and Igor,
I will start again this afternoon, with a new install (I am right now at
work now) and let all of you know. What I can say so far, in Igor's post,
the point 3a is the critical one. Why I have to switch the cable:
on 10/4/2007 5:35 AM Francisco Aparecido da Silva spake the following:
Hi all!
I search on documents of Endian about samba, about start it in boot
on and make samba to pdc (Primary Domain Controller) and engine to
use clamav by samba to scanner files after download to disk on server.
I not
on 10/4/2007 9:51 AM Francisco Aparecido da Silva spake the following:
Tanks Ssilva, I'll do it! But I need these features on small office!
The other distros have many features of the firewall, like web proxy and
content filters. Go look at their webpages and see if they will do what you
on 10/4/2007 1:07 PM active trader spake the following:
I am trying to install for the first time efw 2.1.2. I am having serious
problems. During the install I get no option for entering passwords. The
only thing I am asked to enter (not just chose yes/no) is to enter the green
ip address.
on 10/3/2007 3:37 PM turbo spake the following:
An update on this: Pinging directly from the efw box, the curser just sits
there as I mentioned in the previous post.
After unplugging efw and pluging back the D-link router and pinging from a
LAN machine, I get a response. So, WHY is efw not
on 10/3/2007 1:29 PM turbo spake the following:
Hello efw users,
I have a serious problem to get efw connected to the internet. I am at a
loss of why. I would appreciate any hints help.
My setup as follows:
Efw 2.1.2 , 2 nics, recognized and working, no special services, just an
install
Andre Bunting spake the following on 9/18/2007 3:03 PM:
guys i have been running my endian firewall for a while now and i am
HAPPPY with it.. problem i having of late is that the pcs on the green
connection will not be able to browse the web for a few minutes ever so
often.. like today it
Dennis Ayala spake the following on 7/27/2007 10:48 AM:
I have Outgoing Firewall disabled but I cannot connect to any server
using port 6667.
I tried IRCZ servers as well as a Disney Game server that uses port 6667.
Any ideas?
Dennis
Maybe the IRC servers are looking for ident
Thomas Heimann spake the following on 6/25/2007 11:20 AM:
Hi
has anyone already experiences with efw 2.1.1?
Should i use the havp 0.86-2 rpm from Mike or 0.86-1 which comes
with 2.1.1 ?
Thomas
I haven't even seen an announcement for 2.1.1. Has it been released to
community?
--
Emax spake the following on 6/14/2007 4:14 AM:
Thanks for your quick replay. My problem is not related to DNS or WINS
services because it replays when I ping my domine server host name.
Before this OpenVpn connection there was a IPsec connection. Under the old
connection the PCs could join
Marcelo Vanilla spake the following on 6/6/2007 7:47 AM:
That is very hard.. the efw not have instaled any compiler... i tried
install gcc but not compiler instaled :P
Help me...
Marcelo
2007/6/6, Tarrant Marshall
[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]:
You'll want to setup
marcelovanilla spake the following on 6/4/2007 10:33 AM:
I need some help... please.
How to install postgre 8.2.x on Endian firewall?
My client need a linux server with postgre sql and a firewall linux. :D
Endian firewall is the best... + postgre sql + samba = ^L^
Thanks for all.
Marcelo.
Héctor S. Mendoza O spake the following on 6/4/2007 10:52 AM:
Hello all,
I’ve just installed a fresh install of efw, but my network cards don’t
get detected, I have 2 3c509
First on install I got an error message stating that the ip could not be
assigned, and figured out that
Mike Tremaine spake the following on 6/4/2007 11:25 AM:
Héctor S. Mendoza O wrote:
Hello all,
I’ve just installed a fresh install of efw, but my network cards don’t
get detected, I have 2 3c509
What does lspci show?
What does lsmod show?
I have the 3C905's in my devel box and
Heinrich Moser spake the following on 5/31/2007 11:59 PM:
Hi!
Every now and then, security exploits are found in software used by
Endian, such as Spamassassin or ClamAV. What's the recommended way to
keep your EFW secure regarding such exploits?
Greetings,
Heinzi
There are a few
Jesse Shumaker spake the following on 5/31/2007 2:25 PM:
what features are added into the new clamav that the old doesn't have.
How concerned should I be about this clamav update. I know that mine is
at 88.7 and I'm running endian 2.1. this is two patch releases out of
date. the definitions
Peter Warasin spake the following on 5/24/2007 2:52 AM:
Hi
DukeOfAwesome wrote:
I have the same problem, but slightly different and I have conducted a
simple test to prove the Endian has a throttling effect on internet traffic
once the HTTP Proxy is turn on and green interfaces are directed
65 matches
Mail list logo
