I have a customer that is interested in a security appliance, and I would
like to suggest an Endian product but their community version is so poorly
maintained and the software like clamAV is so outdated that I'm afraid to
recommend one. Does anyone have any experience with them?
Thanks.
I have a problem with the EFW box, today the system was turned off.
I thinks that there's a hardware issue or there's a process that makes
this happens.
I would think a hardware problem too. I've run EFW for many years, and it is
as stable as any 'nix based OS. For the last few years,
By the way I was also checking out ClearOS which uses
latest version of Squid, have you ever thought of using
ClearOS instead of Endian?
ClearOS is insanely expensive for any of the features you would want that
match a firewall.
The roles on the website calls itself a network, a gateway, or a
the NICs are 3COM and Realtec 10/100MBit/s
CPUload is about 80%
100baseT = 100 Mbps = 12.5 MBps
EFW depends on the speed of the host cpu and on the network cards. Because
of overhead and the limits of older computer buses and cpus, I don't believe
you will get much more than 7MBit/s using
I would like to build a system with built in WIFI AP - but I dont seems to
have the right drivers.
I installed a network card that EFW supports. (Intel or Realtek nics are
fine) Then I attached an external wireless AP with a network (patch) cord to
the network card.
An external Wireless N
I'm now testing ZeroShell and pfSense.
I'm waiting for a linux firewall that supports ipv6 in the GUI to make ipv6
easy to work with. Until then, Endian will work...
--
Monitor your physical, virtual and cloud
Thanks for the effort.
Since I'm not a developer, I was wondering if it was possible to use this to
update clamav from 0.97 to 0.97.6?
Is that a difficult thing to do?
--
Monitor your physical,
This is on Endian 5.1 Community.
I guess you mean 2.5.1
If you search the file /var/log/messages for the word 'ntpd' what do you
see there?
If you click ServicesTime server is the time wrong? Do you override the
default time servers? If so, what do you enter for time servers?
and
I like EFW and I have 2.5.1 , but my problem with System Access is now
working
When I add rule
Source Address: blank
Source Interface: Any
service:User define
protocol: TCP : 10443
policy action:allow
enabled: checked
Mine
http://www.malwaredomains.com/ does not seem to exist, unless your email
caused enough people to open it, causing it to fail.
What are the correct settings in files you mentioned?
--
Live Security Virtual Conference
Yes, http://www.malwaredomains.com eventually opened.
On my Endian Firewall Community release 2.5.1, '/var/efw/dnsmasq/default' is
an empty directory.
However, I do have this:
root@firewall:/ # cat /var/efw/dnsmasq/settings
DNSMASQ_BLACKHOLE=redirect
DNSMASQ_TRANSPARENT_ORANGE=
Running efw-upgrade -s and selecting development builds I'm able to
upgrade to 2.5.1
This does not work for me
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
A backup of 2.4.1 that is restored to a new install of 2.5.1 seems to work
perfectly...
--
Try before you buy = See our experts in action!
The most comprehensive online learning library for Microsoft developers
is just
We use EFW on a physical machine. At the moment we have 3x RED interfaces
(pppoe to adsl).
Running 2.4.0, as the latest version does not like the nic (driver issue).
Hope this helps
With a VM, you can create as many interfaces as you like. Being virtual, you
have a certain amount
I use efw in kvm, but have never needed to support more than one IP address.
Virtual environments give you the ability to easily test hardware
configurations.
Could someone tell me how many active red interfaces/nics EFW supports?
Maybe we can come up with a way to make it work.
The problem is that over 2 or 3 days I have to restart the proxy service
because the dansguardian process consumes all the RAM memory.
Been a while, but I think dansguardian can get stuck trying to update
itself. There were always so many issues with the content filter and with
snort, I
It works great, but about 3 times a day, my IP telephones will start
blinking a message that it cannot find the SIP Server...Connecting.
As others have mentioned, you should upgrade. By now the clamav and
spamassassin and other services are badly out of date. You should check your
logs to be
Could be: bad download, bad cd media, bad cdrom drive, incompatible
hardware.
What hardware are you installing on?
From: Andres Gonzalez [mailto:tuc...@gmail.com]
Sent: Wednesday, December 29, 2010 11:14 AM
To: efw-user@lists.sourceforge.net
Subject: [Efw-user] 2.4.1 install freezes
I run EFW as a virtual machine on a centos kvm box. It even supports the
virtio network card emulation. Works great.
Xen is still around, but RHEL is going kvm...
--
Increase Visibility of Your 3D Game App Earn a
My cable modem doesn't have nat, but it's usually easy enough to disable nat
in a broadband modem. Not that there's anything wrong with double nats.
From: Fernando Cabrera [mailto:balama...@gmail.com]
Sent: Thursday, September 23, 2010 7:35 AM
To: AJ Weber; efw-user@lists.sourceforge.net
There is no reason not to have a router behind another router. And there is
nothing wrong with having two firewalls. Networks are set up this way all
the time.
It's also fine to set it up your way. (green nic into one of the wired ports
of the WRT54G2) as long as you configure the WRT54G2 and
@lists.sourceforge.net
Subject: Re: [Efw-user] Trying Endian at home for learning
Hi CompDoc
Before anything, thanks a lot for giving me a hand
1) I did the connections you suggested. Connected RED nic to DSL Modem and
GREEN NIC to WRT54G2's WAN port. After I did this connection I can't access
EFW, so I guess I'll
You should connect the red nic directly to the dsl modem, setting it for
dhcp, using the IP range 192.168.1.x, (which is what the dsl modem likes)
and also using whatever cable works - normal cable or crossover cable. Try a
normal cable first.
You should then connect the green nic to the
Internet-wan---DSL Modem---lan--red---EFW
Firewall---green-wan---WRT54G2---both lans--to users
--
The Palm PDK Hot Apps Program offers developers who use the
Plug-In Development Kit to
If you are, you shouldn't use the raid feature on the motherboard. Just
attach the drives to the standard sata connectors, and disable any raid in
the bios.
--
ThinkGeek and WIRED's GeekDad team up for the Ultimate
Thanks. I recorded the mac addresses for my virtual nics, deleted them,
added them back using the virtio drivers and the old mac addresses, and it's
working.
It seems as though cpu use is higher now in the dashboard, but an occasional
lag that I was experiencing with an online game appears to
That can mean a couple of things. Typically, it means the motherboard has
lost its bios settings (date time, etc.) and it needs a new cmos battery.
(the small silver coin battery thats on the motherboard) Not as common, but
it happens to me: it can also mean a setting in the bios that youre
Set it to 32. And then see if it boots, but you might need
to reinstall the OS after setting it.
Most boards default to 64, but I think every controller I
have used from 3Ware, Adaptec, and I think even some Promise
cards, has had issues with that setting.
In servers I've built using the
I can't speak to version 2.3 because I still use 2.2, but I
have to disable many of the scanners to get it to run in
that much ram without a lot of disk swap use. Disabling
things like the content filter (which never seems to work
well for me or my customers anyway), and intrusion
detection, and
You might search these lists, but I think someone with one
of these had issues with efw recognizing the nic.
Unfortunately, the linux that efw is based on has limited
hardware support. I wish it included virtio drivers, but it
doesn't...
Do you have a system with an atom cpu?
--
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW
I have several efw 2.2 servers running out in the world, and
you wouldn't want to run 2.2 on a P3, or a Duron.
You can't compare a modern system with those old systems.
Drive and memory bandwidth speeds were pretty horrible back
then.
One customer currently has a 1.5HGz Sempron 2200+ with
From: Gustavo Castro Admon Sistemas
[mailto:siste...@fenusa.com.co]
Sent: Monday, February 08, 2010 10:50 AM
To: efw-user@lists.sourceforge.net
Subject: [Efw-user] Question
Hi, Good evenings it wanted to know if there is the
possibility of connecting an I-phone to VPN to the endian
I've
From: jonas kellens [mailto:jonas.kell...@telenet.be]
Sent: Friday, January 15, 2010 8:23 AM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] Open up ports without sending it to an IP on the LAN
Hello Marco,
to keep the NAT tunnel open between my SIP-phones behind NAT/firewall I
Wouldn’t it be better to use a server like trixbox to handle everything?
In any case, I think sip and iax2 opens ports as needed – at least I have never
needed to open any.
I have used the sip proxy, but it's off right now. I need to read up on its
usefulness...
From: jonas kellens
Did you mean it's the DFI Infinity NF570 SLI-M2 G? Gigabyte
doesn't seem to have a model with that number..
Is apic enabled in the bios? It should be as this gives you
over 200 IRQs instead of the 16 that the original IBM PC
offered.
If it is enabled, its possible that its not implemented
Can't be opened by name? Can it be opened by its ip address?
-Original Message-
From: Vikash Khatuwala [mailto:vik...@netvigator.com]
Sent: Tuesday, November 17, 2009 7:10 PM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] Confused about port forwarding in
Endian 2.3
Hi,
://www.host.dyndns.org:443/ ---(NAT)---
192.168.1.10:443
From inside the GREEN network (eg. my own PC)
http://www.host.dyndns.org:80/ -- redirect to
https://192.168.1.1:10443
https://www.host.dyndns.org:443/ -- Connection time out.
Thanks,
Vikash.
At 10:22 AM 18-11-09, compdoc wrote:
Can't be opened by name
I have both windows and linux guests, and I have 2 efw firewalls running
virtual for myself, and one as a vm for a customer.
I cant get the linux drivers installed on any of them for the same reason
you cant, but I find the performance perfectly acceptable. My customer has
about 40 users, and
What ports do the phones use, and are you using the sip
proxy?
--
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing
Don't use 2.3rc1 - 2.3 has been released. What ports are you
forwarding?
-Original Message-
From: McJerry [mailto:bryanj0...@hotmail.com]
Sent: Friday, October 16, 2009 5:11 PM
To: efw-user@lists.sourceforge.net
Subject: [Efw-user] 2.3Rc1 port forwarding problems
I've tried installing
-efw with
xenserver, but this is unsupported.
regards neobiker
compdoc wrote:
That sounds great. Are you able to install the tools from
the
xs-tools.iso? I have efw running happily on two
xenservers, even without a
xen kernel.
Any interest in kvm in redhat/centos 5.4 when it gets
here
That sounds great. Are you able to install the tools from the xs-tools.iso? I
have efw running happily on two xenservers, even without a xen kernel.
Any interest in kvm in redhat/centos 5.4 when it gets here?
Thanks
**
Hi Christian,
thanks for the ongoing work, it looks really nice. I
wow
--
Come build with us! The BlackBerryreg; Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and
There were problems with the services in 2.1.2 and earlier versions of EFW.
Clamav, etc had problems initialzing and updating themselves at install
because they were out of date. They would take up a lot of cpu time as shown
using top.
Updates are available online for those services, but efw
takCoder wrote:
besides, would someone tell me about system requirements of EFW ??
thanks in advance :-)
Download the current memtest86+ iso or floppy image and create a bootable
disk. Boot the PC that you want to use as a firewall, and look at the
numbers in the upper left-hand
I use the efw as a vpn router. In the Http Proxy - Bypass /
Banned Sources and Destinations section, try placing the ip
address of your vpn server into BOTH Bypass the transparent
Proxy from Source, and the Bypass the Proxy FILTER by source
IP. That would eliminate any interference from the
If it requests the IPSEC connection, then you allow the port
outward? Try disabling the outgoing firewall to test...
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your
Did you solve this problem?
From: Steven Sher [mailto:stev...@techtron.co.za]
Sent: Wednesday, July 22, 2009 1:02 AM
To: efw-user@lists.sourceforge.net
Subject: [Efw-user] upgrade error 2MB on /boot
I am trying to upgrade Endian 2.2RC3 to 2.2 I am getting the
following error msg.
error:
I use mostly AMD cpus for efw and this is the first I've heard of it. Was
this info you found online, or something you discovered for yourself? Sorry,
but I dont know who the team is that works on efw, so its always good to
hear what to watch out for.
It would be helpful to know which chipsets
Theres nothing wrong with AMD processors. It's the network
cards. Try Intel network cards...
--
___
Efw-user mailing list
Efw-user@lists.sourceforge.net
Did you make the patch cords?
-Original Message-
From: jeffrey steve borbon sanabria
[mailto:siste...@fenusa.com.co]
Sent: Saturday, June 27, 2009 4:56 PM
To: efw-user@lists.sourceforge.net
Subject: [Efw-user] Network interfaces down with no cause
Hi
I have a straignh trouble with 1
Ive been playing around with various settings, and found one that works for
one customer. They have limited ram in the efw 2.2 firewall, so I keep the
content filter disabled, running only the virus scanner with http set to
transparent. Quickbooks is set to use IE's settings...
If I place ip
These don't sound like efw problems. You must have a modem
of some kind: dsl, cable, etc?
Can you configure the modem to place the efw into a DMZ
zone? Usually this is done with an ip address.
Ports are being blocked somewhere...
Your cable company gives you a static ip? Mine doesn't...
--
Are you an open source citizen? Join us for the Open Source Bridge conference!
Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250.
What version did you upgrade from? Could you post the *.opvn
file that you use to connect from outside?
Make sure you do not post any passwords or ip addresses, of
course.
--
Are you an open source citizen? Join us
.86A.0028.2007.0928.1134
The message is:
Code: 80 c0 39 5e 04 7e 38 .. ... . . . . . .(and more
numbers)
EIP: [c056cb44] intel_i915_configure+0xe4/110 SS:ESP
0068:c20eaeac
Kernel Panic - not syncing: Attempted to kill init!!!
thanks again!
2009/6/1 compdoc comp...@hotrodpc.com
Yes, please.
What
There is a newer bios out for that board, if Im looking at
the right board on their website.
But I need more info from the boot screen. Please type a few
lines above the Code: 80 c0 39 5e 04 7e 38 part. Im trying
to see what the OS is doing just before the panic...
What amount of ram is the
I didn't want the code, I wanted the lines above the code,
but no matter. The panic is because of the onboard video.
That's good to know...
They sell 1x (single lane) PCI-e video cards for a few
dollars here in the US. You might even be able to buy an old
2 or 4 meg PCI video card on ebay for a
What type of drive are you installing it on? What kind of
drive controller?
From: Rafael Rodrigues de Oliveira
[mailto:rafa.drak...@gmail.com]
Sent: Monday, June 01, 2009 11:14 AM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] Kernel Panic
anyone has more suggestions? please
Yes, please.
What are the lines on the screen just before you see the bad
EIP Value and kernel panic?
In the bios, what is the setting of the PCI Latency Timer?
What is the bios version?
Are you overclocking?
I am seeing issues with the realtek 8111 causing kernel
panics and only
You won't lose connection if you ssh directly to the efw
from outside. Doesn't seem as though you have to reboot, but
I always do.
And 2.1.2 to 2.2 works fine, except for a problem I had with
openvpn, which has a fix and is probably now fixed in the
upgrade...
-Original Message-
From:
I don't see a problem with that setup. I would recommend
using openvpn, since the only port you have to forward is
1194 udp.
From: Lightningbit @ gmail.com
[mailto:lightning...@gmail.com]
Sent: Sunday, May 31, 2009 11:06 AM
To: efw-user@lists.sourceforge.net
Subject: [Efw-user] use endian
I've updated a few 2.3rc3 servers to 2.2 and this has worked flawlessly. Good
job, guys.
But today, I stupidly updated a few 2.1 and 2.1.2 servers to 2.2. It seemed
to go perfectly, and everything works that I can see. But then I noticed one
major problem...
Normally, on the VPN setup page,
Excellent! Thank you.
-Original Message-
From: Andreas Schiller [mailto:a...@aschiller.de]
Sent: Saturday, May 30, 2009 2:35 PM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] updating efw 2.1 or 2.1.2 to 2.2,
openvpn problem
Hi compdoc,
They are missing the ability
I would d/l and create a memtest86+ boot cd, and see if your
ram can run thru one pass without errors. This lets you know
there's nothing wrong with your cpu, ram, and motherboard.
When I've seen this, it's been about my hard drive
controller. Some things to try:
Is there an AHCI option for
How much ram is in the computer?
From: Rafael Rodrigues de Oliveira
[mailto:rafa.drak...@gmail.com]
Sent: Friday, May 29, 2009 11:49 AM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] Kernel Panic
I try disable that but unsuccessful, I test on machine
Smoothwall, Slackware,
They're saying you should also add this line to clamd.conf and
clamd.conf.tmpl to activate this feature which will save cpu time:
HeuristicScanPrecedence yes
--heuristic-scan-precedence[=yes/no(*)]
Allow heuristic match to take precedence. When enabled, if
a
If you don't set it to transparent, you have to manually set
up the client (such as IE) to use the proxy server. That is
located in:
Tools Internet Options Connections tab Lan settings
button.
I would disable Automatically detect settings, since this
slows IE down when opening. And enable
Transparent just means it intercepts all clients as if you
had entered the proxy info into IE, etc.
Once you've added www.google.com and the rest to the white
list, return to the first tab named Configuration, and
click the Save button at the bottom. A green colored box
should appear near the top
By the way, if you manually enter the proxy settings into
IE, there is an Advanced button there where you can also
enter websites that IE will bypass the proxy server for...
--
The NEW KODAK i700 Series Scanners deliver
That's seems to be for version 2.2 rc1. I have efw 2.2 rc3,
and have not seen memory issues on lightly or heavily used
systems.
There were issues for version 2.1.2...
From: Alexsander Loula [mailto:alex.lo...@gmail.com]
Sent: Friday, May 08, 2009 8:24 AM
To: efw-user@lists.sourceforge.net
Where are you seeing this memory usage? On the Status-system graphs page?
From: Tunç YURDAKUL [mailto:tyurda...@gmx.net]
Sent: Thursday, May 07, 2009 6:51 AM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] Endian use %97 of ram
Hi,
Nobody have any idea ?
Tunç
That’s actually normal. When it starts using swap memory, which is disk based,
then you start having issues.
However, I believe the amount reserved for swap is usually equal to the amount
of ram. Did you install efw and then latter added more ram?
On the Status-system graphs page, you
I have a customer with several remote offices connected to a
main office. I'm pretty sure the remote offices can reach
the other remote offices using pings, etc., but they dont
normally do that.
Just running the Windows openvpn GUI on the remote
workstations to connect them to the main
Efw has a few problems that way - it’s a nice firewall, but it seems few ppl
are working on it, it runs on an OS that doesn’t support upstream updates, and
it's even difficult to know what OS it actually is in terms of wanting to
install drivers or utils.
Guess that might make it more secure,
I use this:
TCP Uplink ANY : 110(POP3) 192.168.186.2 : 110(POP3)
TCP Uplink ANY : 443(HTTPS) 192.168.186.2 : 443(HTTPS)
TCP Uplink ANY : 25 192.168.186.2 : 25(SMTP)
TCP Uplink ANY : 80(HTTP) 192.168.186.2 : 80(HTTP)
Etc..
So yours looks fine. It does sound like your ISP might be
blocking
According to:
http://www.virscan.org/report/bf59c287a83acd32583578a14de2d3
f2.html
Not many scanners are finding that one. Can Kaspersky be run
on efw?
From: lane.ben...@southernpiping.com
[mailto:lane.ben...@southernpiping.com]
Sent: Thursday, April 09, 2009 8:57 AM
To:
Edit the template file at /etc/clamav/clamd.conf.tmpl to
disable DetectBrokenExecutables. Change it to no, I think,
or comment out the line with a # since it is disabled by
default.
I don't remember the command to expand the template, but I
think rebooting will cause it to expand to replace
I maintain about 6 efw firewalls, and they like ram. For
smaller numbers of users, I give it 768 Megs, and for about
30 users with heavy usage, including day-long openvpn
sessions, (but limited to a 7 Mbit link) it wants at least 1
Gig.
Ram is often used to cache lookups, etc., so the more the
The cert file is downloaded from the vpn page of efw.
Did you install openvpn gui for windows?
http://openvpn.se/
The cert files are placed in:
C:\Program Files\OpenVPN\config
I have a sample config file if you need one...
-Original Message-
From: NightLord
That's a very small amount of ram. Is it using any swap?
I have snort enabled on a couple of efw servers and I never
hear from it - no warnings, info, etc. Maybe I'm not
important enough to hack...
-Original Message-
From: Bart Heinsius [mailto:bheins...@gmail.com]
Sent: Friday, March
Completely stable. There's only unstable hardware
configurations...
From: Jamal ht [mailto:jamala...@hotmail.fr]
Sent: Sunday, March 22, 2009 12:23 AM
To: endian firewall
Subject: Re: [Efw-user] problem connecting green and red
Hi shaun,
and thank you for your quick reply. the
Sounds like a problem with nero. Try http://www.imgburn.com/
-Original Message-
From: apm1 [mailto:angelp...@gmail.com]
Sent: Wednesday, March 18, 2009 7:53 AM
To: efw-user@lists.sourceforge.net
Subject: [Efw-user] BOOT PROBLEM
Hi, I'm trying to install 2.2 rc3 version, I downloaded
What sort of broadband connection is it?
-Original Message-
From: Scott Silva [mailto:ssi...@sgvwater.com]
Sent: Friday, March 06, 2009 4:22 PM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] Gw2Gw OpenVPN disconnects overnight
on 3-6-2009 7:14 AM defrag4 spake the
Do both sides of the vpn use static ip addresses? What
versions of efw?
I have several efw firewalls linked in a hub arrangement,
server to server, with all servers being located either
across the state, or out of state. They rarely lose
connection, but since most are running v2.1.2 and using the
Never actually needed qos, but I can throw you some ideas.
All traffic has to pass through whatever device is going to
prioritize the packets. This can be either a network switch
with qos, or a router with qos.
Efw doesn't include it, so I wouldn't suggest installing
something unless you know how
I keep hearing the name nagios. Can you tell me if it's able
to tell if your voip trunk is registered?
__ Information from ESET NOD32 Antivirus, version of
virus signature database 3895 (20090227) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
Well, wireless usually means theres a WAP/router involved.
If it is a router, are you trying to use the same subnet for
your wireless clients that you use on the wired lan?
They have to be in a different subnet range, or the router
cant route...
__ Information from ESET NOD32
How much ram and how large is the drive partition?
--
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies
Im fairly sure that efw is a 32-bit OS, and 4 gigs is the maximum amount it can
address. (in theory) In reality, they actually use somewhat less than 4, unless
they use a technology like PAE which some people think is too slow. This is
true of both Windows and Linux-based 32-bit OSes. So I'm
Well, I think it’s the choice of hardware that’s making things difficult. For
most linux firewalls out there, you'd be better off with a single or dual core
cpu. Some older computer that you may have sitting on some shelf unused..
One interesting thing I found on google:
errors -- the total number of receiver or transmitter
errors.
dropped -- the total number of packets dropped due to lack
of resources.
overrun -- the total number of receiver overruns resulting
in dropped packets. As a rule, if the interface is overrun,
it
Those updates delete a few critical files, as has been
posted. Buy they are easily replaced
-Original Message-
From: Mike Knisely [mailto:mknis...@mtbt.com]
Sent: Monday, January 26, 2009 9:15 AM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] EFW 2.1.2 and updates from
You have two different subnets on each end? What traffic
should be going other the VPN? Can you ping ip addresses on
each end?
-Original Message-
From: Simon [mailto:grem...@gmail.com]
Sent: Wednesday, January 21, 2009 6:47 PM
To: efw-user@lists.sourceforge.net
Subject: [Efw-user]
Although it works well and is stable, installing these
updates on 2.1x deletes critical files which have to be
restored, so it's likely to do the same with 2.2x.
2.2x is running fine without the update, so I think I'll
wait until the final release...
-Original Message-
From:
I have a few efw firewalls installed for customers -
versions 2.1 and 2.2, and they all test at full bandwidth of
the customer's DSL lines. Up to 6 MB/s in one case.
-Original Message-
From: NightLord [mailto:steph...@parenton.com]
Sent: Sunday, January 11, 2009 3:46 AM
To:
Ive sometimes seen this happen with other services when the
firewall can't locate an update server. If you log onto the
efw box with a terminal, can you ping outside locations like
www.google.com?
--
felt that was needed in any situations for me
or my customers...
-Original Message-
From: Ifan Jones [mailto:i...@anheddau.co.uk]
Sent: Tuesday, December 16, 2008 5:52 AM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] Relaying email from outside source
Hi compdoc
Yes I do
Im guessing you have the SMTP proxy enabled? I don't use it
myself. On the SMTP page, theres an Advanced tab with many
options like reject non-FQDN sender, and reject non-FQDN
recipient. Do you think those settings are interfering?
Also in Advanced settings, theres an IMAP server for SMTP
1 - 100 of 270 matches
Mail list logo
