Hi,
The distorted audio moves with the Control board, so either K2 can enjoy
distorted transmit audio, if it has the faulty board fitted!
Just to clarify point 3. The 12v rail seemed to modulate on both K2's
when using either the faulty ** OR ** the working Control board!
As this effect is the
Hi Bob,
Do you want to do SO2R with the 2nd K2?
I have been running two K2s, SO2R using either TRLog or CT
with an old laptop and a W4AN type homebrew switchbox.
The laptop has only one serial port, so I switch the KIO2 lines with
a multi-pole relay - not elegant, but it works.
If that's what
--- John W2XS wrote:
The 42-foot wire received slightly lower signal reports than the inverted V,
but most people said that they could still hear me fine on the wire. To my
surprise, though, most people reported no real difference with and without
the counterpoise. I don't know if this was a
Hi Folks,I have a TT 580 Delta with CW filter excess to my needs,I am
offering it for 325 shipped,USA.
it is in good working and in good shape cosmetically. It has WARC bands
also,as always, the price is negotiable. Thanks and Feliz Navidad!
John KF7OM 72' Fallon, Nv.
Mychael Morohovich wrote:
Instead of a 1/4 wl wire, I use an MFJ Artificial Ground to tune a wire for
maximum current per given band. While measuring, one thing that
surprised me was to discover that with my 86' EFW, the use of a properly
tuned counterpoise didn't always increase the current to
Vic, K2VCO, wrote:
Keep in mind that you are measuring the current in the radiator AT A
PARTICULAR
POINT.
-
The counterpoise is tuned for maximum current at the *rig*!
The idea is that the more current flowing into the counterpoise for a given
power output the lower the RF
Hi Elecrafters,
Does any one have any info on the MFJ miniature psu type 4103? Although it
is a sealed unit I wish to adjust the output to keep my internal battery
charged. The nominal output voltage is 13.8 and I wish to adjust to give
14.2 as measured by the K2. I think the unit could be
Thanks for the good infoI am slowly learning.
73, Jim, AL7FS
Ron D'Eau Claire wrote:
--
Jim Larsen
http://www.CSTAlaska.com/
http://www.AL7FS.us/
Anchorage, Alaska
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
I have had a request from a new customer who would like to talk with an
Elecraft customer and possibly get some help as he builds his K2/100.
He is in the Boca Raton area and would like to talk with someone local.
He may even need a little face-to-face help along the way.
If you are
Vic wrote: I was making the point that his experiment of unhooking the
counterpoise and measuring the current into the radiator did not indicate
that
the counterpoise was or was not improving antenna performance.
-
The method I used
Hi all,
I would just like to take the time for a moment and thank Ron, AC7AC for
his support and assistance in helping me get my XV144 working recently.
As usual, I went about things the hard way and decided to run the
transverter at low level from the KX60V. As it happened, the
documentation had
From time to time I make a post reminding folks that there's a web site where
the content comes from a submarine radio operator (www.zerobeat.net/submarine)
.
I'd love to do a similar site with the memories and stories of folks who made
their living pounding brass, whether aboard ship, at a
Finally got the K2 SSB kit to work and my first contact was with ZS6PVT, South
Africa, on rtty at 5 watts. He had a hard time hearing me, but we exchanged
reports fb.
What a radio, thanks to all.
Jerry, N2UZ
___
Elecraft mailing list
Post to:
13 matches
Mail list logo