Nick-WA5BDU wrote:
Is the N1MM protocol for communicating with Winkey made public
anywhere? For us MCU programming CW enthusiasts?
As Simon says, it is actually Winkey's protocol for communicating with
any external application. Full details are given in the data sheets for
the Winkey 1 and
Hello All,
I have read with interest the MARS mod comments and I am a little
non-plussed as I happen to live outside of the centre of the universe
(read Australia) and in the land down under we have various frequencies
outside of the amateur bands which are used regularly in Australia.
For
The Mars mod is just a program that Aptos will supply that opens up
the frequency - there isn't a specific version of the firmware as far
as I know.
I haven't used it since I'm not planning on transmitting outside UK
band - but then we don't have the requirements of a country that could
Fred:
native swr, as measured by the K3, is...
How did you get the K3 to measure the native SWR numerically?
That is exactly what I need to do - on another project.
cln
WB5BKL
- Original Message - --
Message: 7
Date: Tue, 30 Sep 2008 06:26:32 -0600
Evidently emails to Wayne and Lyle get forwarded
automatically to the reflector.
??
Seems very unlikely. Are you sure your email tool isn't doing a 'reply
to all' instead of a 'reply to sender' ??
In gMail a 'reply' just goes to the person who posted the message. A
'reply to all' (which I've
The Pacific Northwest VHF Society Conference takes place this coming weekend at
the Best Western Lake Front Hotel in Moses Lake, Washington. That's east of
the Cascade Mountains on I-90. All of the formal events are on Saturday.
There is also laser and 10 GHz show and tell on Friday
While I am in the process of making some changes to my K1, I will be moving
two Polystyrene caps from the bottom PCB up to the top. The two caps form
part of the VFO tuning circuit. The two bottom caps rest closely along the
steel cabinet and slight flexing of the cabinet noticeably alters
Put the KAT3 in BYPASS mode, press and hold TUNE (not ATU TUNE), read
display.
73,
Ken K3IU
~~~
Cranz Nichols wrote:
Fred:
native swr, as measured by the K3, is...
How did you get the K3 to measure the native SWR numerically?
That is exactly what I need to
Hello Simon!
Programming all night is great fun, only wimps sleep.
WIMP - is this a subliminal indication that you're doing a port of
HRD/DM780 to RISC OS? My RISC PCs are anxious to do *something* in the
shack...
73,
Lyle KK7P
___
Elecraft
On Sep 30, 2008, at 10:12 PM, David Yarnes wrote:
Hi All,
I just have to say that, notwithstanding all the sticky problems
we've seen in production, it's pretty darn amazing that we are
getting close to having 2,000 K3's out there. And apparently demand
is still pretty strong.
Dave
You folks have got to try the new noise gate. It's awesome!
/Rick N6XI
On 9/30/08, wayne burdick [EMAIL PROTECTED] wrote:
MCU 2.45 / DSP 1.92, 9-29-2008
* TRANSMIT NOISE GATE ADDED: The TX noise gate can be used to suppress
transmitted audio below a certain level, e.g. a noisy fan (not
Larry of LP fame called me last night; I must say:
Super support from Larry! I am up and running and loving it!
Thanks and 73 de Dave, W5SV
David F. Reed wrote:
Fellow Elecrafters,
are there any of you using the LP-Pan?
I am looking for some help getting it set up...
I got in my LP-Pan,
Rick Tavan N6XI wrote:
You folks have got to try the new noise gate. It's awesome!
You're not wrong! :)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to:
G00gle has it's archives up from 2001.
From the wayback machine, here is what you get when you enter Elecraft.
http://web.archive.org/web/20010331172806/http://www.elecraft.com/news.htm
http://web.archive.org/web/2001052808/www.elecraft.com
What a long strange trip it's been. (TGD).
Hi K2/Mac users,
Is there any Mac software that supports the KY command to send morse
code on the K2?
I am currently using MacLoggerDX to key the K3 using the DTS signal,
Can this be done on the K2?
Thanks in advance for your help,
Luis
de KN1W
Correction, DTR Data Terminal Ready.
On Oct 1, 2008, at 12:43 PM, Lou Aguilar wrote:
Hi K2/Mac users,
Is there any Mac software that supports the KY command to send
morse code on the K2?
I am currently using MacLoggerDX to key the K3 using the DTS signal,
Can this be done on the
Hello all,
Having taken delivery of K2 #6593 a few weeks ago I have made good progress
with construction and the rig has passed all of the initial power-up tests
(control board, front panel board etc). I must say that the quality of this
kit has really impressed me so far and has more than met
As the subject of this posting suggests I'm quite a young builder; aged 20.
Congratulations! But I don't think you're the youngest to build an
Elecraft radio. Last year we were hearing on this reflector about a K2
school project which I think was a high-school aged group. Someone on
this list
Dear Joe,
I do use 740Hz as a work-around. But, for me, the higher the better.
From F#5 to A5 makes a difference. I'd go even higher than 880Hz if
there were available consonant tones between 880 and 1000. But 880 is
the highest possible with 10Hz increments, provided of course that
Congratulations from one of the oldest K2 builders : I was 78 when I did in
2001. Both rig and old man have been doing well since !
Continue, young man, I hope we'll meet some day ...
Best 73
Jacques F9OJ K2 #0937
- Original Message -
From: m0trx [EMAIL PROTECTED]
To:
I don't know how high you want to go but B5 is within 3 Hz of
990 and E6 is within 2 Hz of 1320. In both cases the 2-3 Hz
is probably within the error of the reference.
At higher tones even 5 Hz (C6 = 1046.5, D6 = 1174.7) is probably
acceptable to all but the most highly trained ear since
Luis,
You cannot use DTR to key the K2 (but it is OK on the K3). You will
have to split out the DTR pin and run it through a transistor to
activate the K2 keying.
*Periodic warning* - even though the K2 AUX I/O connector is the same
size and shape as a PC serial port, that *does not* make
m0trx wrote:
Hello all,
Having taken delivery of K2 #6593 a few weeks ago I have made good
progress with construction and the rig has passed all of the initial
power-up tests (control board, front panel board etc). I must say that the
quality of this kit has really impressed me so far
I must have inadvertently changed a setting because I'm having trouble
transmitting. My last contacts were FB during a contest a few weeks back. Same
up-to-date firmware, no changes. Now when I start talking with the VOX settings
on my MD-2 mic ( set for fpl bias when I checked the settings in
Just did the new firmware dowload, and trying to
set up the new Transmit Noise Gate.
Problem is:
Directions say got to CONFIG:TX GAIN and tap
1. I only show CONFIG:TXGN LP, with a current setting
of 18. No response when tapping 1.
What do I do now?
Thanks and 73
Bob N6WG
Bob Tellefsen wrote:
Just did the new firmware dowload, and trying to
set up the new Transmit Noise Gate.
Problem is:
Directions say got to CONFIG:TX GAIN and tap
1. I only show CONFIG:TXGN LP, with a current setting
of 18. No response when tapping 1.
Not CONFIG: TX GAIN
CONFIG: TX GATE
Thats an error in Wayne's release notes. Go to the CONFIG:TX GATE menu item...
On Wed, Oct 1, 2008 at 1:54 PM, Bob Tellefsen [EMAIL PROTECTED] wrote:
Just did the new firmware dowload, and trying to
set up the new Transmit Noise Gate.
Problem is:
Directions say got to CONFIG:TX GAIN and tap
Bob,
Go back and try again.
I think you are looking at the wrong menu item; you are seeing CONFIG
TXGN HP or LP, and the number; go counterclockwise from there (B knob) 2
steps, to CONFIG TX GATE; it will show on or off, and the level of it...
73 and Good Luck de Dave, W5SV
Bob Tellefsen
Hmmm
Don't have TX GAIN, just CONFIG:TXGN LP.
Checked CONFIG with TECH MD ON and OFF.
Also checked MENU.
Directions say To use the noise gate, locate CONFIG:TX GAIN, tap '1' to
turn it ON
Just loaded the latest firmware from E'craft site and no TX GAIN or TX GATE
there.
Sorry about the font
Are you sure you downloaded the correct version. Maybe you forgot that
the firmware is beat.
vy 73 de toby
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
Are you sure you downloaded the correct version. Maybe you forgot that
the firmware is beat.
Not beat but beta...
sri
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
Be Sure Tech Mode is ON.
Just loaded the latest firmware from E'craft site and no TX GAIN or TX
GATE there.
Sorry about the font shift here.
Help!
73, Bob N6WG
- Original Message -
From: Vic K2VCO [EMAIL PROTECTED]
To: Bob Tellefsen [EMAIL PROTECTED]
Cc: Reflector Elecraft
Simon,
Could you give us an update on when you expect to integrate the
WSJT modes (especially FSK441) into DM780?
Thanks and 73,
Bill W5WVO
- Original Message -
From: Lyle Johnson [EMAIL PROTECTED]
To: Simon (HB9DRV) [EMAIL PROTECTED]
Cc: Elecraft Reflector elecraft@mailman.qth.net
Bob,
Check your firmware level. It sounds like you do not have the latest
beta loaded.
If it is not 2.45 MCU and 1.92 DSP, then you do not have the noise gate
installed.
You must follow the steps to download the beta version, because this has
only been released at a beta. The
Hello Bob!
Be sure you've downloaded the latest BETA firmware. Directions for this
are on the website. After downloading, be sure you see the correct
firmware revs in
CONFIG:FW REVS
Once you have confirmed the correct firmware is loaded, scroll to
CONFIG: TX GATE
and follow the
Hi Dave and Vic and Brett and Toby
Finally figured out the problem.
I had the downloaded zip file in C:\K3 Utility\beta 2r45
but when I unzipped it, it created a new subfile,
C:\K3 Utility\beta 2r45\k3fw2r45.zip. I finally copied
the contents of this file back into C:\K3 Utility\beta 2r45
and
Hi Lyle and Don and Monty
Finally figured out the problem.
I had the downloaded zip file in C:\K3 Utility\beta 2r45
but when I unzipped it, it created a new subfile,
C:\K3 Utility\beta 2r45\k3fw2r45.zip. I finally copied
the contents of this file back into C:\K3 Utility\beta 2r45
and things
At 12:28 PM 10/01/08, Don Rasmussen wrote:
G00gle has it's archives up from 2001.
Interestingly, enter Paris Hi1ton and you get hotel listings. ;-)
One would assume that you'd need those in lieu of taking her home to
meet mom and dad.
Thom k3hrn
Paul,
Is there any chance that you are in DATA mode instead of SSB?
73,
Don W3FPR
paul hendershott wrote:
I must have inadvertently changed a setting because I'm having trouble
transmitting. My last contacts were FB during a contest a few weeks
back. Same up-to-date firmware, no changes.
Thanks to all who pointed me to the info that I should have been able to
find myself. ;^)
And to K1EL for providing the nice documentation.
73--Nick, WA5BDU
Simon (HB9DRV) wrote:
The WinKey programming interface is available - see K1EL's website.
Congratulations on your accomplishment. Last spring a group of students in my
electronics class undertook the challenge of building a K2 (SN6281) It is now
part of ARS KI6PRK at Dos Pueblos high school in Goleta CA. It was completed
just before school let out for the summer and the new classes
I just hope they don't need the credit market to keep the business greased.
There are AAA rated businesses now who can't float short term loans for
normal business needs.
On Sep 30, 2008, at 10:12 PM, David Yarnes wrote:
Hi All,
I just have to say that, notwithstanding all the sticky
Good Evening,
Both nets went very well tonight. I had no QSB on anyone but there were a
few comments of it occurring on my signal. QRN got bad on 40 meters but it
waited for a little while. QRM was bad at times on both nets. Tuners and
folks calling across me happened more than once but
I just finished building my new K3 (all except the 100W amp that awaits
final checkout). The rig seems to power up OK, but returns error messages
when I do the Synthesizer Calibration. It returns Err VCO with E 00374 data
and/or ERR VC4 with E 00039 data. I checked the seating of the oscillator,
44 matches
Mail list logo