Nice new feature! Makes the K3 an even more versatile and user-friendly DX
machine!
Installation went smoothly, except previous assignment of macros SPLIT/SUB
on/off to PF1/PF2 was erased in the process and function switches changed to
the MIX commands...
Assigned the SPLIT macros again and now
I guess that's my problem... Wide CW to me is greater than 1 KHz BW,
which I often use. A weak signal in these wide passbands can be
improved alot by shifting the passband. But a 0.01 step, assuming it
even covered the entire range, would be pretty tedious for such wide
BW. So, yeah... I use both
Amazing, is there no limit to what this radio can be made to do!
This new feature installed without problems and no change to previously
assigned PF1 /PF2/ M1 for Split+1/Split+5/Cleanup macros.
Thanks to all at Elecraft really impressed with this radio.
73, Deni
F5VJC
Richard Squire wrote:
Just subscribed to this list. Maybe a K3 in my future.
73, Albert, W A 7 F X B/4
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Send at 10:12AM 10/27
I've sent several messages to the reflector that never get posted or
take more the 24 hours to post.
I sent one yesterday and I haven't seen it yet.
Anyone else have similar problems?
de K2GN/Larry
K3 - S/N 3278
Larry - K2GN wrote:
I've sent several messages to the reflector that never get posted or
take more the 24 hours to post.
Always try to post in Plain Text and do not include attachments. Most
Mailman lists are set up to automatically trash rich text (i.e. HTML, etc)
or posts with
Derw, AF2Z, wrote:
I use both .01 and .05. It's just a little inconvenient when
changing from one to the other and the WIDTH gets reset to 400 Hz every
time.
If you're inclined to use a rig control program, DXLab's Commander now has
very nice slider controls for adjusting the K3's bandwidth and
If you're inclined to use a rig control program, DXLab's
Commander now has very nice slider controls for adjusting the
K3's bandwidth and shift. It only takes a click of the mouse
to change between 10 Hz and 50 Hz increments. (DXLab is free!)
The 10 Hz/50 Hz radio button in DXLab's
Wayne, N6KR, wrote:
I'd like to thank everyone who's been testing the K3's new macro feature.
It appears to be working as intended, allowing operators to customize
SPLIT and other operations as needed.
Use of these MACRO's for setting up K3's in split mode will virtually
eliminate mistakes
Hi List
Thanks for the several welcoming messages I have received so far from other
list members.
I don't think I'll be getting a kit anytime soon since, as a totally blind ham,
my soldering skills leave something to be desired! hahaha--Maybe a factory
assembled unit. What provisions, if any,
Joe Subich, W4TV wrote:
If you're inclined to use a rig control program, DXLab's
Commander now has very nice slider controls for adjusting the
K3's bandwidth and shift. It only takes a click of the mouse
to change between 10 Hz and 50 Hz increments. (DXLab is free!)
The 10 Hz/50 Hz
Hi, Albert.
There are PC programs K2 Voice and K3 voice respectively that speak
the various control settings when they're changed or upon demand.
Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Albert Sanchez
That's fine, but what if you don't want to control the rig via computer?
- Original Message -
From: Dick Dievendorff die...@comcast.net
To: 'Albert Sanchez' albertsanc...@suddenlink.net;
elecraft@mailman.qth.net
Sent: Tuesday, October 27, 2009 11:14 AM
Subject: RE: [Elecraft] New to list
Not that long, but I have seen a few hours pass between posting a message
and when it appears to me on the reflector download.
It's not the same for everyone, either. Apparently the list is on more than
one server, and the messages must propagate across the servers before
everyone sees it. So I
It would be nice to 'undo' the SPLIT+2 function by a second key press...is
that possible in the MACRO language?
tks
Dick PA3CW
Chuck Guenther wrote:
Wayne, N6KR, wrote:
I'd like to thank everyone who's been testing the K3's new macro feature.
It appears to be working as intended,
Albert,
The KRC2ACC will provide some (but not all) the display information in
morse code.
The K3 also has button tones that will be helpful to you.
I do recommend K3Voice as the best solution, but yes, that needs a computer.
73,
Don W3FPR
Albert Sanchez wrote:
That's fine, but what if you
On lp-pan web site they give an example of sdr,trx manager, skimmer,n1mm logger
all on the same screen. How do you set it up to run like that. I have a large
monitor and it would be nice to have all the programs on the scrre at the same
time instead of toggleing.
Joe
Dick, PA3CW, asked:
It would be nice to 'undo' the SPLIT+2 function by a second
key press...is that possible in the MACRO language?
Good idea for a MACRO, Dick.
Try this MACRO I call UNSPLT: SWT13;SWT13;SWH13;RT0;XT0;
73,
Chuck NI0C
K3 s/n 1061
Or just a HOLD of the SPLIT button to turn it off???
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Tue Oct 27 8:50 , Chuck Guenther sent:
Dick, PA3CW, asked:
It would be nice to 'undo' the SPLIT+2 function by a second
key press...is that possible in the MACRO
Right, Chuck - or even simpler:
FR0;
73
Richard - HB9ANM
Chuck Guenther wrote:
Dick, PA3CW, asked:
It would be nice to 'undo' the SPLIT+2 function by a second
key press...is that possible in the MACRO language?
Good idea for a MACRO, Dick.
Try this MACRO I call UNSPLT:
Thanks for that correction, Joe. However, I think-- as far
as the user is concerned-- the effect is the same, i.e., with
Commander, one can very conveniently increment the shift in
increments of 50 or 10 Hz as he/she chooses. It works great!
The only problem is that 10Hz steps limit
This is being sent to several groups and individuals. Do not think it is
SPAM, it is simply the result of an inquiry about the latest Operating
System released by Microsoft, Windows 7, and how that OS interacts with some
software in use in the amateur radio community. The fourth paragraph
Greg - AB7R wrote:
Or just a HOLD of the SPLIT button to turn it off???
Of course that will work, Greg; however the UNSPLT macro has the
advantage of equalizing VFO A and B frequencies and bandwidths and
undoing the split with a single keystroke.
73,
Chuck NI0C
K3 s/n 1061
Wayne,
Normally, main RX audio is heard in the left channel, and sub in
the right. Now, using the CONFIG:MIX menu entry, you can put main
RX audio in both channels while leaving sub audio in only one (or
vice-versa; or even put both receivers in both channels).
Now that the Mix
On Tue, 27 Oct 2009 08:43:49 -0700 (PDT), JOSEPH MARION
kf...@yahoo.com wrote:
On lp-pan web site they give an example of sdr,trx manager, skimmer,n1mm
logger all on the same screen. How do you set it up to run like that. I have a
large monitor and it would be nice to have all the programs on
Very true. But just exiting split your modes will already be the same from
your
previous macro execution. The only thing potentially lacking would be the
equalization of the VFOs. But that does not really matter unless you are going
to
go into split again. And if you are, you will
YES!!
(this would fix many outstanding issues)
73,
Barry N1EU
Joe Subich, W4TV-4 wrote:
Now that the Mix capability is in place, how about the unified
Mix and Receive VFO control (e.g., like Yaesu) to make life
easier for logging software to support the SO2V operating
Richard, HB9ANM, wrote:
Right, Chuck - or even simpler: FR0;
Thank you. Actually FR0 is much better for an UNSPLT macro.
The problem with using SWH13 is that it would actually put the
K3 in split mode if it wasn't already there. So here's a better
UNSPLT macro that will undo any splits between
The bandwidth appears to be limited when using 10 hz and it is painfully
slow when the bandwidth is fairly wide.
When I am in PSK or RTTY and using search and pounce, I use wide bandwidth
in HRD and DM780 to find the signal I want on the screen and then narrow it
in so it is better for me to
My idea was to just use the same button to toggle on and off :), so that
would not cost another programmable button. Don't know if this is possible
Tks,
Dick PA3CW
Greg - AB7R wrote:
Very true. But just exiting split your modes will already be the same
from your
previous macro
F/S K2 with the following opions and their prices new.
K2 S/N 6640 $689.95
KPA100 100 watt amp 399.95
KBT2 SSB 109.95
KBT2 battery in qrp lid 79.95
Kat100-1 ATU 239.95
MH2 Mic 59.95
Nifty mini manual 22.25
Franki
I assume the 2nd RX (aux RF) is protected against RF pickup from the TX
antenna?
See Question re K3 diversity reception thread on subreceiver protection
http://n2.nabble.com/Question-re-K3-diversity-reception-td1664307.html#a1664741
quote
The KRX3's AUX input is protected by a
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Hi all.
I'm having fun configuring my instant-split function, and an undo, to
my personal liking, feeding off ideas from others on this reflector
and trying them out via the K3 Utility. It works well but the really
cool part is that we can each have our own settings without pestering
the
Excuse me if this is a dup, but I noticed that a couple previous posts
seem to be without the message in the archives, only the subject line.
Trying to send this in plain text to see if that's the problem.
Anyway, my K1 for sale, ser. no. 59, has the NB, AT, battery option,
wide range tilt
I have for sale a built KAT-100, the 100 watt external auto tuner that
interfaces directly with K2. Low profile only 1.2 high, and can beneath the
K2. It is now excess to my needs. It is in very very nice condition. Includes
two antenna jacks all manuals and IO cable. The 10 LEDS monitor SWR
Casey,
Yes, the blank messages you see on the reflector are the result of
people who try to send in HTML or Rich Text.
73,
Don W3FPR
Casey wrote:
Excuse me if this is a dup, but I noticed that a couple previous posts
seem to be without the message in the archives, only the subject line.
Gary Hinson wrote:
I'm having fun configuring my instant-split function...
It works well but the really cool part is that we can each have our
own settings without pestering the Elecrafty wizzards to death
You were thinking maybe this was a coincidence...? :)
Would it be possible
I have just returned from a few days away in Italy with my xyl. Being
limited with what we could take (we were flying, usually we drive), I took
along my KX-1. It was the first time that I had used it this year- blame
the K3 for that!
When I used it last (in CT and EA in summer 2008) I posted
...three or four strong broadcast stations around 14.2MHz
Harmonics of 40 meter BC stations..?
Best regards,
Dick - KA5KKT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hi Dick
Maybe they are, but I don't hear anything on the K3 (or even my FT-817) on a
much bigger antenna, and anyway there is not much BC activity I can hear on
7.1MHz these days. I should add that the KX-1 has the 30/40 board and the
internal ATU fitted.
73 Stephen
On 27/10/2009 20:35,
Hi Stephen,
The KX1, like most low-current QRP transceivers, uses an active mixer
in the front end. IMD products can appear in the mixer's output
spectra when large signals are present at the input, especially if the
LO (local oscillator) injection is insufficient.
Try backing down the RF
Just a little brainstorming.
There seems to be quite an interest in undoing the changes made by a
macro. This might be possible with the addition of a pause command.
The first part of the macro would set your changes. Follow this with a
pause command and then the macro undo
Stephen,
The first thing I would suggest is to see if the KX1 is really receiving
on 20 meters, or perhaps on some other frequency band. What I am
thinking is that the firmware chip may not be fully seated in the
socket, which will cause to DDS output to be on some unknown frequency.
Another
Many thanks Don, I have also had some input from Wayne on this one and have
some things to check with the scope. I shall combine your reply with his
and see where it takes me.
Thanks again
73 Stephen
On 27/10/2009 21:57, Don Wilhelm w3...@embarqmail.com wrote:
Stephen,
The first thing
Works great.
Did clobber the macros in M4 and PF2 but they were easy to restore.
73 de Brian/K3KO
Wayne Burdick wrote:
Normally, main RX audio is heard in the left channel, and sub in the
right. Now, using the CONFIG:MIX menu entry, you can put main RX audio
in both channels while leaving
Wayne, I would be interested in testing this feature. I am unable to connect
to the nabble site for some reason.
Thanks, Len K3LJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Anyone care to scan the entire Programmer's Reference and suggest some
new macros we haven't thought of? The only rule is that it has to be
useful :)
Here's the latest update:
http://www.elecraft.com/manual/K3_Pgmr%27s_Ref_Rev_C6.pdf
We're getting very close to a beta release, so you'll
Matt,
Here are the firmware rev's: MCU 3.41, FPF 1.04, DSP 2.37. Several additional
pieces of information I have found. In addition to the menu situation as
mentioned, when changing modes the mode will not change from CW. Remember you
need to go through CW to get
I had issues with yesterday's update and did a radio shut down restart. All
cured.
Bill
K9YEQ
K2-#35 (2 more), KX1-#35, K3, TS2000, IC7000, etc.
From: w...@q.com
To: elecraft@mailman.qth.net
Date: Tue, 27 Oct 2009 23:24:33 +
Subject: [Elecraft] K3 Menu Stuck
Matt,
Here
I have made a Trade, TNX for the replys.
Kurt/K0ARO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Jim,
This is a bit of a stab in the dark, and may or may not have anything to
do with what is happening to you, but exactly how many methods are you
using to do PTT? It sounds as if you may have two or perhaps even three
methods enabled simultaneously, which is not a good idea and might be
80M NR2.2 FW3.44 CW RFmax AF~1/3 Headphones NoSubRx
Tuning around a bit and switching among filters (2.8, 1.0, 0.4, 0.25) with XFIL
Hit with about 1/4 second blast that really took my ears off.
__
Elecraft mailing list
Home:
KG0KP wrote:
The bandwidth appears to be limited when using 10 hz and it is painfully
slow when the bandwidth is fairly wide.
...
What would be really nice, if possible, is to auto change to 10 hz shift
when you adjust your width below (pick a number) 200 or so and back when
you go
We'll send you 3.51, the latest field-test release, which should
correct this.
tnx
Wayne
N6KR
On Oct 27, 2009, at 5:55 PM, Jim Miller wrote:
80M NR2.2 FW3.44 CW RFmax AF~1/3 Headphones NoSubRx
Tuning around a bit and switching among filters (2.8, 1.0, 0.4,
0.25) with XFIL
Hit with
55 matches
Mail list logo