One of the things that has been in the back of my mind for some time to add
to KComm is a panoramic display. To do this I would need a) to find some
code for converting I and Q data from the sound card to a wiggly line and b)
an SDR receiver to hang off the IF output of the K3. It occurs to me
Hello,
I'm in process to buy light headset for K2. I'm primary contester. Which
microphone element I should choose for K2?
Any comments about quality of sound and comfort (24h or 48h contest),
BM-10 vs Traveler?
Thank You
7S7V (SM7VZX)
I found the pressure of the Traveler became uncomfortable after an hour or so.
I much prefer around-the-ear muffs not pressure on the ear.
David
G3UNA
Samir Popaja samir.pop...@impact-europe.se wrote:
Hello,
I'm in process to buy light headset for K2. I'm primary contester. Which
Hi All,
It's a really good deal, particularly when you see that ARRL is selling them
for $20 more, and that is supposedly $10 off the regular price. I already
ordered (and received) one from Bill Kelsey (Kanga US). It cost a bit more,
but the shipping was less, so around the same price--and
Hello Samir ...
I'm not familiar with the BM-10 but do have a Traveler for use with my ICOM
7000 that I sometimes use for portable excursions. So can't comment about
the audio with a K2, but I would not recommend the Traveler for contest work
because of its construction. It is very light and
Those of you with the new handbook, how does the 250 watt amp look?
What is the supply voltage. Might make for a nice project.
Rich - N5ZC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Rich - N5ZC wrote:
Those of you with the new handbook, how does the 250 watt amp look?
What is the supply voltage. Might make for a nice project.
Yes, 2 or 4 combined together...
Svend, OZ7UV
TDC Bredbånd for 0 kr.
- Spar 695 kr.
I am happy to get the new 10 hz shift control. Been waiting on that since I
bought the radio. It works great. Just in time for the CQ WW. Next thing
I would like to see is more than 1 selection for RX EQ. Need one setup for
CW and one for SSB. Keep up the good work..
73 Mike K4PI
Good Morning!
Have I done something, or is the config: bat min missing from 3.63? It
certainly has disappeared from my configuration menus -- or, which is more
likely, have i done something , which is more likely, to cause it to disappear?
73, and enjoy Thanksgiving
Tom K4AEN
dit dit
Thomas Morehouse wrote:
Have I done something, or is the config: bat min missing from 3.63? It
certainly has disappeared from my configuration menus -- or, which is more
likely, have i done something , which is more likely, to cause it to
disappear?
Without checking, that looks like
Tom,
It is still here on my K3 with 3.63 - right between AUTOINF and BND MAP
- the menu items are in alphabetical order (thankfully).
Happy Thanksgiving to all.
73,
Don W3FPR
Tom Morehouse wrote:
Good Morning!
Have I done something, or is the config: bat min missing from 3.63? It
When you put your K3 in split mode, does the word Split
appear to the right of the Buck button in the N1MM Logger
entry window?
No. N1MM Logger 9.11.0
73,
... Joe, W4TV
-Original Message-
From: elecraft-boun...@mailman.qth.net
Or eight.
--- On Wed, 11/25/09, Svend Spanget span...@privat.dk wrote:
From: Svend Spanget span...@privat.dk
Subject: Re: [Elecraft] ARRL Handbook - 250 Watt Amp?
To: Richard Thorne rmtho...@suddenlink.net
Cc: Elecraft Elecraft@mailman.qth.net
Date: Wednesday, November 25, 2009, 6:26 AM
Rich -
Just add a 1 between the KPA and the 500 :-)
Have a Happy Thanksgiving for the USA folks. Everyone else have a nice day.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob W9RFS
Sent: Tuesday, November 24, 2009
What is the macro command to do the same function as pressing and holding
the NORM button?
I want to be able to mess with the various shift and width controls, but be
one button away from returning everything to the default or normal settings.
Randy, K5ZD
Randy, K5ZD wrote:
What is the macro command to do the same function as pressing and holding
the NORM button?
SWH58;
73,
Barry N1EU
--
View this message in context:
http://n2.nabble.com/Macro-question-tp4065913p4065958.html
Sent from the Elecraft mailing list archive at Nabble.com.
The KAT-2 and K2 lid (top panel from my recently sold K2 are available
for sale. The set will plug
into the slots for the KAT-100 and convert it to a QRP rig with
internal tuner. It is of no use to me now.
Make offer. $100 would seem to be fair. Or trade for ??
--
73 AllanK7GT
database 4636 (20091125) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Randy,
Maybe I am dense this morning, but ---
I am not certain what you will gain by that - the NORM button does
exactly that already, why map this single button (knob press) into a
macro when it is right there on the front panel.
73,
Don W3FPR
Randy Thompson K5ZD wrote:
What is the macro
Try K31; SWH58;
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Wed Nov 25 8:17 , Randy Thompson K5ZD sent:
What is the macro command to do the same function as pressing and holding
the NORM button?
I want to be able to mess with the various shift and width controls,
#1 - Family
#2 - Friends
#3 - Good Doctors, without which there wouldn't be a
#4 - Elecraft for a great product and support.
A fifth possibility would be an end to the USB/RS232 thread!!
There are many differences for different reasons.
Not all manufactures of hardware recommend a USB conversion
Dick K8ZTT wrote:
I read in the US Interface
Navigator Installation Manual was to avoid using COM 3; the manual says;
for some reason (known only to the computer gods and maybe Bill Gates) COM 3
can be grabbed by other programs
--
Historically (going back to the
Mostly tap vs hold. Plus I wanted to do some other things with the VFOs in
the same macro.
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Wednesday, November 25, 2009 5:03 PM
To: Randy Thompson K5ZD
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft]
On Wed, 2009-11-25 at 05:42 -0700, Dyarnes wrote:
It's a really good deal, particularly when you see that ARRL is selling them
for $20 more,
The 2010 edition is a really major revision with a number of the
chapters re-written from scratch. I wrote the chapters on
Modulation (8) and DSP and
On Wed, Nov 25, 2009 at 2:26 PM, Joe Subich, W4TV li...@subich.com wrote:
When you put your K3 in split mode, does the word Split
appear to the right of the Buck button in the N1MM Logger
entry window?
No. N1MM Logger 9.11.0
Strange ... seems to work consistently for me, whether through
David Y. wrote:
It's a really good deal, particularly when you see that ARRL is selling
them
for $20 more, and that is supposedly $10 off the regular price. I already
ordered (and received) one from Bill Kelsey (Kanga US). It cost a bit
more,
but the shipping was less, so around
Locally they charge $10 more for the Handbook but picking it up and paying
tax I save about $4 over the special offer account the freight charge.
73, Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill W4ZV
Sent:
That's $4 saved by ordering from Elecraft.
73 de Jim
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
Sent: Wednesday, November 25, 2009 3:43 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Special offer
Because I had been considering a new Owner's Manual for some time,
I chose to bundle that with a Handbook. The combined shipping
wasn't a lot more than the Manual alone, which is obviously available
only from Elecraft.
73, Paul W8TM
when I selected 3 or more handbooks with the USPO Book rate shipping the
shipping cost went to $999.00!
Mark n2qt
- Original Message -
From: Paul Kirley pkir...@fuse.net
To: elecraft@mailman.qth.net
Sent: Wednesday, November 25, 2009 4:00 PM
Subject: Re: [Elecraft] Special offer
From previous posts, I believe that's Eric's sense of humor telling you that
you've done something wrong entering your order.
Ron AC7AC
-Original Message-
when I selected 3 or more handbooks with the USPO Book rate shipping the
shipping cost went to $999.00!
Mark n2qt
- Original
Probably the 15 pound limit on book rate?
Oliver
W6ODJ
On 25 Nov 2009, at 1:23 PM, Mark n2qt wrote:
when I selected 3 or more handbooks with the USPO Book rate shipping the
shipping cost went to $999.00!
Mark n2qt
- Original Message -
From: Paul Kirley pkir...@fuse.net
To:
Every once in a while firmware updates do result in changed CONFIG
values. I suspect this results from user customized settings being
changed back to default values as a result of new coding affecting
specific functions.
After every update I run through the CONFIG bank to see which values, if
The 999 is an alert to point out you have exceeded the allowable weight
for book rate. (It also shows up if you forget to pick a shipping method.)
Email sa...@elecraft.com and they will give you the actual shipping cost.
73, Eric
Mark n2qt wrote:
when I selected 3 or more handbooks with the
Don Wilhelm-4 wrote:
Paul,
Rather than trying to do your proposed test, I would suggest you look
carefully at the T/R switch area first. Typical problems are diodes
oriented wrong (check against the Parts Placement diagram in the back of
the manual). A broken lead (or unsoldered,
I have a favorite paddle that has four SPST mini- spring switches built into
its base, intended to activate cw memories in an external keyer (which I
don't have). It's probably futile to think I can directly wire those
switches up to the K3 and somehow activate M1 - M4, but just thought I'd ask
controllers, satellite antenna control, IC-910H
control, and last but not least a DSP-2232 data controller), so that gives
me a spare for possible future use.
Dick K8ZTT
__ Information from ESET NOD32 Antivirus, version of virus signature
database 4636 (20091125) __
The message
Before getting into the problem description, I have done some homework and
know that others have had similar problems, so I'm hoping to tap into some
experience. The problem is with high gain in the SSB transmit chain on 40
meters versus 10 meters. Folks often perceive these problems as high
Elecraft will be closed Thursday, November 25 and Friday, November 26
for the Thanksgiving holiday.
Our on-line order page will still be available during that time. :-)
For those of you here in the U.S., have a great holiday!
73,
Eric WA6HHQ
Paul,
Do you have a sufficient signal level to give you 1.6 volts out of the
AF amplifier?
The impedance of the amplifier's input is considerably higher than the
impedance connected to the output, so the AC voltages may actually be
similar in and out. Can you peg the S-meter with your signal
Rob,
Yes, there does seem to be something extreme in your problem
description. The K2 does have the greatest TX gain on 40 or 30 meters,
but it should not drop off so fast on the higher bands.
I would start by removing the KPA100 and testing the base K2 for maximum
power output on 40 meters
[Dates corrected.]
Elecraft will be closed Thursday, November 26 and Friday, November 27
for the Thanksgiving holiday.
Our on-line order page will still be available during that time. :-)
For those of you here in the U.S., have a great holiday!
73,
Eric WA6HHQ
It is not a matter of blaming Elecraft, K1EL, Green Heron, the various software
authors or any other ham radio vendor or person. It is a matter of trying to
find the combination that will work and hoping that someone is smart enough to
know how, or lucky enough to stumble on the secret, or
Hi Don (again!)
I was following the steps in the signal tracing checklist that say with 25mV
in to the AF amp I should get 1.6V out with the speaker disconnected and I
don't. I've checked the signal path from the audio amp to the speaker
connector and there are no shorts or open circuits.
The
Richard, I still haven't received that board.
Thanks,
Stan Rife
W5EWA
Houston, TX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I was playing with ALC and compression settings tonight, and turned on
the monitor function. If I turn it up high enough to hear myself (around
9), I get a loud BRR squeal, that has an echoic component.
Difficult to describe.
I don't recall hearing that when I first set up the mic. I
Mike,
Are you using headphones when you turn up the monitor? If you are using
the speaker, the microphone will pick up the speaker sound and result in
a lot of acoustical feedback.
73,
Don W3FPR
Mike wrote:
I was playing with ALC and compression settings tonight, and turned on
the monitor
What hardware and software are you using to turn on and off your K3 over
internet from a remote location?
Thanks
John k9uwa
John Goller, K9UWA Jean Goller, N9PXF
Antique Radio Restorations
k9...@arrl.net
Visit our Web Site at:
http://www.JohnJeanAntiqueRadio.com
4836 Ranch Road
Leo, IN 46765
48 matches
Mail list logo
