I just want to be able to see the entire menu (or more of it) over on
the P3 all at the same time and I want to see the menu item and the
current value that they are set to.
Here is an example of how it could look:
http://www.tentec.com/images/6.jpg
This way as you're barreling through the
Hi All,
I would really like to see the P3 display the config and main menu with the
ability to select and make changes (as did the FTdx9000D) and a waveform
audio display on Tx and Rx.
Both of course as optional displays so as to not take away from the current
versatility of the P3.
These
Don Wilhelm wrote:
I can't help with eliminating the ATT hold button.
But Elecraft could. How about this?
CONFIG:HOLDDLY. Increases the HOLD time required to activate secondary
functions of push buttons and knobs. Minimum (and default) is 0.5
seconds. Further option: for extra-long HOLD times
Ian,
I like your idea, would work for me and I would certainly change my default
setting as they are now.
73's
Gary
On Tue, Aug 10, 2010 at 4:52 PM, Ian White GM3SEK gm3...@ifwtech.co.ukwrote:
Don Wilhelm wrote:
I can't help with eliminating the ATT hold button.
But Elecraft could. How
Remote Internet control would be nice, but I'd rather it be a virtual
control panel on my computer screen. Then I could travel anywhere
and connect to my ham shack for remote operation. Maybe convert that
RJ45 test jack to a ethernet portal?
The size of the radio is just fine as-is. You
The tap and hold time constants have never matched my body very well.
It would be great to have these time constants user adjustable. I'm
pretty tired of getting a band change when switching between QSK and
semi-- especially during a contact.
It just seems reasonable that there are a
I adore my K3, but the Owner's Manual index, not so much. I just went
looking for references to the preamplifier, because I couldn't see the
button caption to turn it on or off (I know, I'm blind), and there is
not a single hit on the term. This is often my experience when trying
to use the
Eric has ended this thread so I will not go into the bigger/smaller box
thing. But I think Nick has a good point regarding the auto-send mode.
In order not to miss a letter of his call whilst ending the auto-send
mode, I use the Escape button on my keyboard. In N1MM that works great but
as far as
My K3 (SN 1069, fw 4.03) has always exhibited the ability to have PRE and ATT
on simultaneously. If one engages ATT by a long hold, then hits PRE with a tap
(same button), the display shows both functions engaged. The converse is true
too, i.e. PRE engaged with a tap, followed by ATT with a
Bill,
Normal operation. The attenuator is -10 dB and the preamp is +12 dB.
So if you only need +2 dB of preamp, turning both on will give it to you.
73,
Don W3FPR
Bill McDowell wrote:
My K3 (SN 1069, fw 4.03) has always exhibited the ability to have PRE and ATT
on simultaneously. If one
I used to have the real-time clock showing in the VFO B part of the K3's
display, but this disappeared after a firmware upgrade.
Is it still possible to do this, or did the functionality go away with new
firmware?
__
Elecraft mailing
Hi Andrew,
Tap DISP and you should see the clock display.
A second tap should display the calendar.
A third tap should take you back to the clock.
Most don't seem to keep good time and need
frequent resetting, though. YMMV.
73! Ken Kopp - K0PP
elecraftcov...@rfwave.net
I find myself not printing new versions of manuals, Elecraft and others, and
relying on Adobe Reader to display them on screen. Using CTL-F to find the
desired section is usually quicker for me than using the index. If you have
Adobe Professional or a similar program you can highlight in yellow
This has been covered here many times, but download the PDF version and you can
search the PDF...
http://www.elecraft.com/manual/K3_Owner's_Manual_Rev_D7.pdf - high res version
http://www.elecraft.com/manual/K3_Owner's_Manual_Rev_D7sm.pdf - web res version
poke around the Elecraft site, lots of
Have you tried pressing the Display button and turning the VFO B knob?
73 de James K2QI
On 8/10/10, Andrew Moore andrew.n...@gmail.com wrote:
I used to have the real-time clock showing in the VFO B part of the K3's
display, but this disappeared after a firmware upgrade.
Is it still possible
My thoughts exactly. I has hoping for a calm productive discussion. I agree
with Buck, ideally all of these components would weight the same or less
than they do now. Marketing this GREAT radio to a new radiance that want
that big box all in one radio. Like the guys that buy DX-9000s and IC-7800s.
It might make gain 2dB, but what does that do overall to dynamic range? Has
anyone measured performance with both attenuator and preamp on??
- Original Message -
From: Don Wilhelm w3...@embarqmail.com
To: Bill McDowell k4...@earthlink.net
Cc: elecraft reflector elecraft@mailman.qth.net
Thanks Ian, that was helpful!
- Original Message -
From: Ian White GM3SEK gm3...@ifwtech.co.uk
To: elecraft@mailman.qth.net
Sent: Tuesday, August 10, 2010 2:52 AM
Subject: [Elecraft] Button HOLD time
Don Wilhelm wrote:
I can't help with eliminating the ATT hold button.
But
Don,
The main difficulty I believe with down-converting a band to audio, and
then up-converting back to RF to demonstrate the performance of the P3,
could be the spurious products generated during each conversion, which might
reflect badly on the true performance of the P3 if the products
I know that the big box thread has been killed I was going to post my
thoughts yesterday but did not
The only thing the DMU in my subjective opinion was good for besides
(pretty eye candy) was the
menu being completely displayed in plain English, it does
everything. but nothing well.
You can recall the default bandwidth for each roofing filter by using
the XFIL button. If you then used PF1/PF2 for two other bandwidths
you would not tie up M1 - M4.
When operators come in and have an hour or two to learn things, it is easier
to relabel the M1-M4 bandwidth and just tap
Ladies and Gents:
I am selling my lovingly built K2 (#5717).
K2 (10 watt) ... with the following options:
Complete set of unmodules with the mic adapter, K160RX (built but not
installed), K60VX, KAF2, KAT2, KIO2, and KSB2. All it will require for
the 160m option is to install the BNC adapter,
Have you tried pressing the Display button and turning the VFO B knob?
Done, works, thanks all.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
An outboard appliance containing programmable buttons would be useful. For
example, I'll push SPOT hundreds of times during a contest. A small pod that
I could position on the left side of my computer keyboard would be nice.
Bandwidth selection from the pod would be a real bonus.
73,
Mike K2MK
Hi,
Just getting some idea on when my order #2135-5082-0730 will be filled.
Thanks very much,
Chuck Hawley, KE9UW
c-haw...@illinois.edu
Jack (ret.)
Jack Hawley MOA and RA #224, KE9UW (Chuck, my first name, for Ham Radio and
Lionel Trains).
Just getting some idea on when my order #2135-5082-0730 will be filled.
Chuck a/k/a Jack,
Only a few folks can answer your question -- and I hope they are
spending their time working at Elecraft, not watching this reflector.
:)
For a better response send your request to sa...@elecraft.com
So sorry. Meant to send to Elecraft and had the same nickname in my address
file for the reflector and the sales.
Sorry, Chuck, KE9UW
Original message
Date: Tue, 10 Aug 2010 09:25:07 -0500
From: Mark Bayern plcm...@gmail.com
Subject: Re: [Elecraft] Just checking on order #
NAQCC Sprint Tuesday night!
This coming Tuesday evening will be the monthly NAQCC Sprint for August, 2010.
I will refer you to the proper URL:
http://home.windstream.net/yoel/sprint201008.html
There you will find all the details as to time, frequencies and also a special
prize.
This month's
An outboard appliance containing programmable buttons would be useful.
Available now with X-Keys (www.xkeys.com) devices as long as you
are using a computer. X-Keys devices could be programmed to
generate K3 macros which can be combined with Logger control
using the Enterlogic VSPE (Free) or
Hi Joe,
Looks good, but if Elecraft made it, it would be perfectly integrated with
the K3. It could be programmed from the K3 Utility Program and would not
require other software to be running for it to work.
73,
Mike K2MK
--
From: Joe Subich,
Looks good, but if Elecraft made it,
And you think Elecraft can produce something in small quantities
at a price competitive with a larger market product, sell it to
a subset of the 5000 Kw owners at a lower price than the equivalent
commercial product and make a reasonable profit?
Believe
JOHN SAID
Elecraft could design a small (RFI
quiet) switching PS which would constantly recharge an
appropriately sized LiFePO4 battery pack, which in turn would
supply the power needed by the K3/P3 combo (i.e. 25 amps).
In effect this would replace the large caps in the HPS-1a
design, with
Joe, how would I use X-keys (say a stick) on a Mac running OSX 10.6.4 via a
DigiKeyer?
73 de M0XDF
--
Being a System Administrator is like being a plumber.
If you do a good job, nobody knows. If you screw up, everybody gets covered in
s**t!
On 10 Aug 2010, at 16:27, Joe Subich, W4TV wrote:
Hi all,
I just finished building my K2 and it seems to be working well on receive.
However, I have noticed that I can hear CW stations on both sides of zero
beat when using the widest (1.5kHz) filter setting. It's not just a weakly
audible signal for very strong 59+20 signals, which I would
Don Wilhelm said:
Brett,
I think the K3 gets an undeserved bad rap for the menus. The main
menu has only 13 items in it, and those are the items most likely to be
changed during operation.
___
I agree. I was intially overwhelmed by the CONFIG menus. However, after I got
my K3
tailored just
How much would you be willing to pay? $300, $500?
Willis 'Cookie' Cooke
K5EWJ
From: eric manning eric.mann...@engr.uvic.ca
To: elecraft@mailman.qth.net
Sent: Tue, August 10, 2010 10:29:39 AM
Subject: Re: [Elecraft] Elecraft Power supply
JOHN SAID
Chris,
There are 2 things 'wrong' which are contributing to your problem.
First, the varactors that have shipped recently have a greater
capacitance range than they used to - same type number, so 'go figure'.
The result is that the filter widths at the wider settings are
substantially wider
my P3 sn # is one off from my radio #44 #...@#%$#@^%$
whomever got # 44would ya swap labels sn for # 43
tnx for the trivial waste of everyone 's time
bill
__
Elecraft mailing list
Home:
I think I would pay $500. I have no idea if it is do-able at that price.
eric
VA7DZ
How much would you be willing to pay? $300, $500?
Willis 'Cookie' Cooke
K5EWJ
From: eric manning eric.mann...@engr.uvic.ca
To: elecraft@mailman.qth.net
Sent: Tue, August
Just to give the waiting group an idea of serial numbers. Now to the build!!!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Thanks Tom and Don for helpful advice. I will try Spectrogram to re-setup
the filters. So far I just set them up using the data in the table in the
manual.
Chris
g0kla
ac2cz
On Tue, Aug 10, 2010 at 12:21 PM, Tom Hammond n...@embarqmail.com wrote:
Hi Chris:
What method did you use to adjust
You know, sooner or later this practice is going to backfire. Someone
is going to swap, say, SN 150 for SN 50. Then Elecraft is going to
come out with a hardware mod that applies only to units with SN
100. Pretty unlikely for units a few numbers apart, but there IS a
point to having
This is NOT a bug, this is working EXACTLY as it should. Some time you want to
have a little extra gain, but not as much as the Pre does alone. In this case
you will run the Pre ON, and the ATT on at the same time. No bug there. Just
another way Elecraft has made the K3 a versatile rig
This is available on the K2 as well, but only by sending commands via
the KIO2. I made a little program to do that so I can set pre/att on
each band depending on noise before adjusting RF Gain. It goes in the
Feature category. :-)
73,
Mike ab3ap
On 08/10/10 12:53, The Smiths wrote:
This is
good point
since i was missing the standoffs for the front panel i was stoppe
din my tracks when i started to assemble
bill
At 12:26 PM 8/10/2010, you wrote:
Bill: You might want to check - but what if the P3's serial number
is imbedded in the firmware as was done with the K3. In which
Now, why should Elecraft build power supplies?
Let them stick to what we know their good at: making transceivers and
ancillaries, kits, ...
There is a plethora of good, clean PSUs on the market.
Just for info: I have two, rated at 28 A peak, from a German provider but
they look as if they were
This is one of those things that has always been possible in radios
that had both. In the MP, with the 0-6-12-18 ATT and both IPO and
menu selected preamp function, it has always been possible to do
preamp with the ATT set. Make any sense? Maybe, but don't think so.
Even less so on a K3
A lot
I know that at Dayton, Elecraft showed an outboard amplifier to be available at
a later date.
I presently have a K3 10 and am wondering id the 10 watts will be enough to
kick the new amp and does anybody have an idea how many dollar$ ?
Sorry if this was already covered.
A happy K3 owner
The serial number is NOT programmed into the P3. Joe, however, does
have an excellent point about future mods. While you will probably
remember what the real number is, someday your P3 might belong to
someone else who may not.
73,
Brian, W6FVI
P3 Production Manager
Elecraft,Inc.
This is NOT a bug, this is working EXACTLY as it should. Some time you
want to have a little extra gain, but not as much as the Pre does alone.
In this case you will run the Pre ON, and the ATT on at the same time. No
bug there. Just another way Elecraft has made the K3 a versatile rig
...I presently have a K3 10 and am wondering if the 10 watts will be enough
to kick the new amp
Yes, it will. You'll likely get more than 100 watts but less than 200
watts output with 10 watts of drive. If you want the full 500+ watts,
then you'll probably need 30W to 40W of drive.
73,
A great future enhancement would be to allow the user to assign, via the K3
utility software, which functions go to Menu and which go to Config.
Frequently-used functions on Menu, the rest on Config.
Could probably be done with a table of pointers and a little software magic.
---
On Tue, Aug
Is there a command to toggle the monitor function on and off without changing
the level?
I operate with both headphones and external stereo speakers plugged in. When
I'm ragchewing or just messing around, I'll use external powered stereo
speakers, but when I'm more serious about a contact,
I thought the same thing, but if they are willing to accept it...
73 de M0XDF
--
Children aren't happy without something to ignore, And that's what
parents were created for. -Ogden Nash (1902-1971)
On 10 Aug 2010, at 17:27, Joe Planisky wrote:
You know, sooner or later this practice is going
snip because they want the band scope built in or some thing else.
So, I've said more than my peace. Elecraft if you ever build a larger case
count me In.
Yes, I'd have one.. I miss the scope on the front of my 756pro2. Well, I
don't actually as it sits next to the K3. :-) but I sure would love
I don't really have a horse in this race because I am personally very happy
with my K3 (#693) and, knowing that Wayne's Engineering degree included
emphasis on Engineering Ergonomics, I am satisfied that he has given us the
best possible radio in the form factor that is most popular to most people
Nicholas Farrar said:
But even the Queen of England could stand to refine herself a bit more.
_
WHAT? To us loyal subjects of Her Majesty, that is like saying that the
US Constitution
is imperfect. Unthinkable.
Elizabeth II has lasted a lot longer, with a a lot fewer screwups, than
any
I am getting an error message when attempting to open Rev A3 of the P3
Manual (10 August 2010) saying that the file is corrupt. I've tried
several times. Do others find the same?
David
--
David G4DMP
Leeds, England, UK
__
P3 #40 arrived today at 11AM and is alive and well. Great job Elecraft! No
hitch or glich.
Dan
AB3EN
-
Dan AB3EN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-40-is-alive-and-well-tp5394332p5394332.html
Sent from the Elecraft mailing list archive at Nabble.com.
Dave,
Joe does make a good point about the $99 price of such a device. And the
stick and small pad offered by X-Keys does seem to offer a possible solution
to those wanting to add macro and general function buttons to their K3. The
roadblock for me and probably many others would be how to
Given that, I don't
think that even Burt Rutan would consider adapting a VariEze (K2) or a
Starship (K3) into an AirBus form factor ...
Seems like a bad choice for an example. Burt did create the Long-EZ, a
larger version of the VariEze.
Mark
On Tue, Aug 10, 2010 at 1:18 PM, Steve Harvey
It is not.
Dick, K6KR
I wonder if the SN is programmed into the P3 firmware like it is in the
K3?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Shame on Ken for starting all this and shame on me for yielding to peer
pressure. Got #54, want #83 - - - K3/100 #83 is lonely for it's sibling!
Reply off list - thanks - Don N4HH
__
Elecraft mailing list
Home:
Frequently, when I am hunting for something about my K3, I already have
two monitors full of other stuff, which is why my remark purposely
applied only to the printed manual.
73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network
Same here.
73, Ken K3IU
~~
On 8/10/2010 2:30 PM, David Pratt wrote:
I am getting an error message when attempting to open Rev A3 of the P3
Manual (10 August 2010) saying that the file is corrupt. I've tried
several times. Do others find the same?
David
Just worked (1908Z) Guy N7UN/5 who was atop Greenie Peak in NM on 14061 kHz
with his K2. Good signal here - not sure how long he'll be on the air.
http://www.mountainzone.com/mountains/detail.asp?fid=4384356
John Harper
http://www.ae5x.com/blog
Yep same here, cannot download the P3 manual, corrupt file that can
not be repaired.
Merv K9FD
Same here.
73, Ken K3IU
~~
On 8/10/2010 2:30 PM, David Pratt wrote:
I am getting an error message when attempting to open Rev A3 of the P3
Manual (10 August
Pete Smith N4ZR wrote:
Frequently, when I am hunting for something about my K3, I already have
two monitors full of other stuff, which is why my remark purposely
applied only to the printed manual.
Minimize the other stuff and search with Adobe Find box. This is the only
way to go as
Depends on the Amplifier, I have a SPE Expert 1K-FA.10watts drive = 500
watts out
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lyle Johnson
Sent: Tuesday, August 10, 2010 1:33 PM
To:
Yes, I am not able to open it either. Adobe says the file is damaged and
can't be repaired.
Todd, WA7U
--
From: David Pratt da...@g4dmp.fsnet.co.uk
Sent: Tuesday, August 10, 2010 12:30 PM
To: Elecraft Reflector elecraft@mailman.qth.net
Subject:
Good Grief!Grin
Comedy relief on this reflector can sometimes exceed brilliance.
Now to try and heal my sore ribs from laughing.
73's
Gary
On Wed, Aug 11, 2010 at 4:38 AM, Don Nesbitt n...@yahoo.com wrote:
Shame on Ken for starting all this and shame on me for yielding to peer
pressure.
I downloaded 9.3 (newest one) of Adobe Reader and STILL get the file error
too.
73,
Don, WB5HAK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I got #99. I'm happy with it and don't want to trade, HI. Also, I could
make it 66, by simply reversing the tag, but I won't confuse that
owner!!!
73,
Don, WB5HAK
__
Elecraft mailing list
Home:
Are you using Google chrome? I have had similar problems when using Chrome,
but no problem with Explorer. There is also an option that can be set in
Adobe Reader to open in a new window rather than in the browser, that seems
to work if one wants to use Chrome.
73 - Mike WA8BXN
I just tried the download and got the same error message here also.
Not seen this before.
Gary
On Wed, Aug 11, 2010 at 6:02 AM, Mike WA8BXN hubb...@hotmail.com wrote:
Are you using Google chrome? I have had similar problems when using Chrome,
but no problem with Explorer. There is also an
I'm able to download 651KB of the file then I get the File is damaged
and unable to repair error.
I'm able to download all other manuals without issues. Using IE 8.
W4CCS
On 8/10/2010 4:02 PM, Mike WA8BXN wrote:
Are you using Google chrome? I have had similar problems when using Chrome,
but
If the SPE does that, which is 17dB gain, then it does not conform to FCC
rules that limit gain to 15dB.
Bob, N6CM
On Tue, Aug 10, 2010 at 12:37 PM, W4GRJ w4...@satterfield.org wrote:
Depends on the Amplifier, I have a SPE Expert 1K-FA.10watts drive = 500
watts out
Jack
W4GRJ
Sadly, I won't be able to order a P3 for many years. I wonder how many years
it'll take for them to sell 4400+ of them.
73 - Gary / k3wow, k34407
On Aug 10, 2010, at 3:56 PM, Don Cunningham wrote:
I got #99. I'm happy with it and don't want to trade, HI. Also, I could
make it 66, by
Looks like its some other problem from what I described I have seen with PDF
files and Chrome. I tried to download with Chrome and Explorer and got the
same error. The Elecraft web site says the file is 2.5 MB in size, but the
during the download the size was around 655 KB, so I suspect now there
And yet they certified it.
http://www.radio-ham.eu/Download/FCC-Certification.pdf
On Tue, Aug 10, 2010 at 1:13 PM, Robert Friess rfri...@usa.net wrote:
If the SPE does that, which is 17dB gain, then it does not conform to FCC
rules that limit gain to 15dB.
Bob, N6CM
On Tue, Aug 10, 2010
Does any one know if the KPA500 has been certified yet?
Phil
Philip LaMarche
LaMarche Enterprises, Inc
p...@lamarcheenterprises.com
www.LaMarcheEnterprises.com
727-944-3226
727-937-8834 Fax
727-510-5038 Cell
www.w9dvm.com
K3 #1605
CCA 98-00827
CRA 1701
W9DVM
-Original
I can't download on a Mac either - tells me the file may be corrupted.
73 de M0XDF, K3 #174
--
I don't mind that you think slowly but I do mind that you are publishing
faster than you think.
-Wolfgang Pauli, physicist, Nobel laureate (1900-1958)
On 10 Aug 2010, at 21:30, Mike WA8BXN wrote:
How much would you be willing to pay for an internal
uninterruptible PS in the P3?
Let's see: Working from what we already know . . .
Gamma Research HPS-1a is $169
According to Ron AC7AC there is only 4x4x6 space available in the P3,
so keeping that as a limiting factor, even the following
John Harper wrote:
Just worked (1908Z) Guy N7UN/5 who was atop Greenie Peak in NM on
14061 kHz with his K2. Good signal here - not sure how long he'll be
on the air.
http://www.mountainzone.com/mountains/detail.asp?fid=4384356
It was a SOTA activation of W5/SS-015, good for 10 SOTA points.
Depends on the Amplifier, I have a SPE Expert 1K-FA.10watts drive =
500
watts out
http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr;sid=f338c42916def7b9976d97732e60ec83;rgn=div8;view=text;node=47%3A5.0.1.1.6.4.157.9;idno=47;cc=ecfr
§ 97.317 Standards for certification of external
If it has, it hasn't hit the FCC website yet. I just searched.
On Tue, Aug 10, 2010 at 1:35 PM, Phil LaMarche plama...@verizon.net wrote:
Does any one know if the KPA500 has been certified yet?
Phil
Philip LaMarche
LaMarche Enterprises, Inc
p...@lamarcheenterprises.com
Don't forget the caveat I offered with that space size - I've yet to see a
square millimeter in a cabinet that Wayne didn't disclose a planned use for by
the time the product reached maturity :-)
Take a peek at the inside of a fully-loaded KX1, K2 or K3 for an example.
Tnx for the Powerizer
The Elecraft webmaster has been alerted. He's working on it now.
Ron AC7AC
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David Ferrington,
M0XDF
Sent: Tuesday, August 10, 2010 1:44 PM
To: elecraft@mailman.qth.net
Thanks for the feedback, folks!
The P3 Owner's Manual Rev A3 link has been fixed and will now download
correctly.
73,
Brian, W6FVI
P3 Production Manager
Elecraft,Inc.
Original Message
Subject:Re: [Elecraft] P3 Manual Rev A3
Date: Tue, 10 Aug 2010 21:44:19 +0100
Yhanks Brian, all worked FB now.
Gary
On Wed, Aug 11, 2010 at 7:23 AM, Brian br...@elecraft.com wrote:
Thanks for the feedback, folks!
The P3 Owner's Manual Rev A3 link has been fixed and will now download
correctly.
73,
Brian, W6FVI
P3 Production Manager
Elecraft,Inc.
Good Grief...me thinks the correct spelling is ThanksArgh!!
On Wed, Aug 11, 2010 at 7:29 AM, Gary Gregory garyvk...@gmail.com wrote:
Yhanks Brian, all worked FB now.
Gary
On Wed, Aug 11, 2010 at 7:23 AM, Brian br...@elecraft.com wrote:
Thanks for the feedback, folks!
The P3 Owner's
Brian,
Is there somewhere to read what the changes are in these manuals that I have
just missed?? I'd hate to print the A3 manual only to find a change so
small I could have just written it in my old A2 version, hi.
Thanks,
Don, WB5HAK
As of 5:40 EDT I was able to download it (open it) without any
problem in Firefox (Vista/64).
73,
... Joe, W4TV
On 8/10/2010 5:16 PM, Ron D'Eau Claire wrote:
The Elecraft webmaster has been alerted. He's working on it now.
Ron AC7AC
-Original Message-
From:
True, but it's a different airplane--not a VariEze with a larger fuselage
wrapped around it.
73 de nn0b, Steve
-Original Message-
From: Mark Bayern [mailto:plcm...@gmail.com]
Sent: Tuesday, August 10, 2010 12:37 PM
To: Steve Harvey
Cc: elecraft
Subject: Re: [Elecraft] Big box K3
$2200
David
G3UNA
and does anybody have an idea how many dollar$ ?
Sorry if this was already covered.
A happy K3 owner Rich KC8HMJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
The rigs most of us remember with matching power supplies - the Collins,
Heathkits, etc.- HAD to have custom power supplies designed to provide
specific voltages and the specific currents needed.
That went away with the advent of the rigs designed to run from 13.8 VDC.
Ron AC7AC
Took a quick look at the rev A3 manual after using rev A2 last night to
assemble and test the P3. As far as I can tell, the only difference is the
addition of a Servicing the P3 section at the end of the rev A3 version.
Talks about removing the covers, cleaning the bezel, replacing the display,
There are some other changes in the operating section. Here's a summary of
the significant changes:
1) Incorporated outstanding errata A2-1.
2) Integrated Appendices into main document to allow better
cross-referencing between sections.
3) Added Servicing section including one page of notes for
Huh? I thought that was illegal?
~Brett (N7MG)
On Tue, Aug 10, 2010 at 12:37 PM, W4GRJ w4...@satterfield.org wrote:
Depends on the Amplifier, I have a SPE Expert 1K-FA.10watts drive = 500
watts out
Jack
W4GRJ
-Original Message-
From: elecraft-boun...@mailman.qth.net
The Expert 1K-FA is FCC Certified.maybe my meter is not accurate
In any event, I am sorry I ever commented on this reflector with such
responses.
Jack
W4GRJ
-Original Message-
From: Brett Howard [mailto:br...@livecomputers.com]
Sent: Tuesday, August 10, 2010 8:48 PM
To: W4GRJ
Cc:
1 - 100 of 125 matches
Mail list logo