Geoffrey Mackenzie-Kennedy escribió:
Hi Ramiro,
Unfortunately I do not have a K3 to test because my receivers are
homebrewed.
That is a very interesting thing. I have also homebrewed receivers. They
are far from perfect but I love them, hi.
I still believe that the IMD is generated by
In reference to (email below), the observations are also noticed here.
First, thanks Lyle for looking at it. Let us know if we're hearing things?
I had run 3.97 since I purchased the K3 (2nd K3), and was reluctant to
upgrade Firmware. Fear of nightmare SS QRM made me decide to feast on the
new
Good morning Don, The R8 was set to hold but I changed it to normal and tried
the chirp was still there. I then went back to hold and tried again still a
chirp. As you said it is not doing the rig any harm so I will just leave it
as is. The watt meter that I am using is the LP-100A that I built
Mike,
How old is this KPA100(does it have red toroid cores or blue ones), and
do you have the KDSP2 installed? These may seem like unrelated
questions, but actually they are not. A looong time ago (with the older
KPA100 T/R switch design) there was a problem with click on unmute
when the
Maybe more; can't tell from the angle of the other photos recently posted to
their website:
http://www.kermadec.de/service/pictures/main.php?g2_itemId=142
John AE5X
http://www.ae5x.com/blog
__
Elecraft mailing list
Home:
Pretty sure both of those you can see are K3's :-)
73 de M0XDF, K3 #174, P3 #108
--
When work is a pleasure, life is a joy! When work is a duty, life is
slavery. -Maxim Gorky, author (1868-1936)
On 24 Nov 2010, at 14:53, John Harper wrote:
Maybe more; can't tell from the angle of the other
In the K3 Utility program, ver 1.3.11.5, if you hit Help, then K3 Utility Help,
and look in
the Contents tab and then Help over the Web, and then Frequently Asked
Questions you
get to a fantastic document telling all about features of the K3.
I suspect some parts of this document is
Is there something I failed to set up to get this to work, or is it
not implemented yet?
CONFIG:VFO OFS ON | OFF
73,
... Joe, W4TV
On 11/24/2010 10:09 AM, Rick Stealey wrote:
In the K3 Utility program, ver 1.3.11.5, if you hit Help, then K3 Utility
Help, and look in
the Contents
Rick-
This is a great feature for large QSYs.
In my manual (revision D2), it's on page 59 at the bottom. In the VFO
CRS entry, it says to set CONFIG:VFO OFS to ON. (Well, maybe I should
have directed you to the VFO OFS entry on page 60 first.)
Some people prefer to leave it off because
Every few days, I walk back into the shack and see the Blue Screen of
Death on my monitor. it says, Hardware malfunction Parity
Check/Memory Parity Error.
I'm using a Dell Inspiron laptop with WinXP.
Any ideas? Does this mean the laptop is on its way out?
Tnx,
Barry
--
Barry Kutner, W2UP
Hi Barry,
If you can get access to the memory simms/cards then you might try removing and
re-inserting them. This has been known to fix that sort of problem. It's a
no-cost action that might save you some $$$.
73,
Ken Alexander
VE3HLS
--- On Wed, 11/24/10, Barry w...@comcast.net wrote:
See CONFIG: VFO OFS on page 62 of the current K3 Owner's manual. VFO OFS
turns it on and off, and CONFIG:VFO CRS sets the tuning rate (per mode).
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rick
All the rigs in the pictures are K3's. The clue is the carrying strap +
size, or the strip of light gray buttons on the right front panel + size.
73, Guy.
On Wed, Nov 24, 2010 at 10:02 AM, David Ferrington, M0XDF
m0...@alphadene.co.uk wrote:
Pretty sure both of those you can see are K3's :-)
Sorry for being slow to reply.
Oh yes, a coil wound on a core made from Ferrite or Powdered Iron will
be a source of IMD products, the culprit being the core. The level of the
IMD products generated by a core depends on a number of factors, which we
could discuss Off List if you wish.
While I
On 11/24/2010 7:42 AM, Barry wrote:
Every few days, I walk back into the shack and see the Blue
Screen of Death on my monitor. it says, Hardware malfunction
Parity Check/Memory Parity Error. I'm using a Dell Inspiron
laptop with WinXP.
Any ideas? Does this mean the laptop is on its way
Barry - I had this problem randomly with my Dell Inspiron laptop over about a
year or so. Go to the Dell website and see if there are any operating system
downloads for your computer. There were for mine, and this completely fixed
the problem.
Phil - AD5X
G'day,
Less than 20mV in all circumstances as measured on my Fluke 8020B.
Unfortunately I don't have a 'scope so I can't look at the frequency
component. I used to have access to an earth stations worth of
fancy test equipment so never bought my own!
I really don't think it is a PSU issue.
Please add to the next Elecraft lisitng:
For Sale: EC2 Enclosure Kit, new in box, never used, $50.
H. Michael Pierce
KD8DVV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Thanks to all who replied. I did it and it works great.
Another gift from Elecraft that I didn't know I had.
Rick K2XT
__
Elecraft mailing list
Home:
I upgraded to the K3 from a very old, very basic rig and am unsure if other
modern rigs are capable of such a narrow bandwidth that is actually useful, ie
w/o ringing.
With a 50Hz bandwidth, I'm learning that spotting the last station worked by
the DX is much more accurate than would be
I've been turning on 160 the first thing in the morning for a couple
weeks, ever since putting elevated radials under my inverted L, and
hearing nothing but noise and a couple U.S. super stations calling CQ
DX. Did I mention there was a wasp on the window outside my room yesterday?
So this
Thanks for the advice, gang. Memory modules were easy to get to, so I
reseated them. Will follow Phil's suggestion next and then wait and see.
If still problems, will replace the RAM modules. Certainly cheap enough
these days.
Barry W2UP
--
View this message in context:
After selecting MKR A and pressing the Select knob, the P3 does not change the
frequency on the K3 as the instructions suggest.
I cannot seem to figure out what might be wrong.
Dick Brown
KT6X
K3 4916
P3 845
__
Elecraft mailing list
Nick-WA5BDU wrote:
I've been turning on 160 the first thing in the morning for a couple
weeks, ever since putting elevated radials under my inverted L, and
hearing nothing but noise and a couple U.S. super stations calling CQ
DX. Did I mention there was a wasp on the window outside my room
First you assume that everyone uses spots. Some of us do not. (I know I'm in
the minority here)
Second, if a DX station is working split, you don't know where he is listening
but I doubt that he is using 50 Hz BW, especially if he's working a mode other
than CW :-)
I think your getting
I knew you were going to say that...
John AE5X
http://www.ae5x.com/blog
I think your getting through better is more a function of mental telepathy
than hardware
__
Elecraft mailing list
Home:
On Wed, 24 Nov 2010 00:53:21 -0800, W7BRS Jeff Wandling dew7...@gmail.com
wrote:
[snip]
Not me!
How many of you would like this: Whatever your NOTCH setting is, it is
preserved on power cycle similar to the way NB, NR, AGC, etc.. are preserved
on power cycle.
[snip]
As I said, mental telepathy :-)
BTW, about what I said spots. Since my last message a few minutes ago, I
worked ZL8X on 15M CW. I then heard him say QSY SSB. I tuned to their
announced operating freq, set XIT to +5 and waited. When he made his first CQ I
got him on one call, with my
It means they are smarter than the average bear and also are paying less in
overweight baggage fees :.)
Seriously, I'm sure it's coincidence, but I worked the ZL8 on my third call,
which is pretty amazing for my puny signal. I spent hours calling the PJs.
Barry W2UP
--
View this message in
Please stay on the list, guys, this is interesting stuff that I'm sure many
would like to hear more of.
David
G3UNA
Sorry for being slow to reply.
Oh yes, a coil wound on a core made from Ferrite or Powdered Iron will
be a source of IMD products, the culprit being the core. The level of the
Hello group
Is it normal while turning the Main VFO Knob I hear
some noise like friction? no there is not too much friction.
I dont hear such noise on my old IC-746
73, Claude VE2FK
__
Elecraft mailing list
Home:
I vote no on this option..
Jim K4JAF
- Original Message -
From: Amateur Radio Operator N5GE n...@n5ge.com
To: elecraft@mailman.qth.net
Sent: Wednesday, November 24, 2010 12:16 PM
Subject: Re: [Elecraft] K3: Latest Beta FW - Vox, TX Gate and Notch
On Wed, 24 Nov 2010 00:53:21
I noticed that if I'm on 6m, with the PR6 selected (press RX ANT) and Preamp
on (press PRE), then the P3 makes a click-click noise about every 9 seconds.
When it does so, I get a horizontal red line across the waterfall display.
Any thoughts?
Michael
N6MEF
This may be the COR (carrier-operated relay) cutting in because of the strong
signal level. I have experienced the same thing on 40M.
73,
Doug Fleming
KF4VTT
K3#1289
P3#371
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-click-click-tp5771758p5771836.html
Sent from
Wes Stewart wrote:
BTW, about what I said spots. Since my last message a few minutes ago, I
worked ZL8X on 15M CW. I then heard him say QSY SSB. I tuned to their
announced operating freq, set XIT to +5 and waited. When he made his first
CQ I got him on one call, with my 40-meter
Hello all
As David suggested we continue the discussion on the list. I have done
some new poor man tests, using a local AM carrier on Medium Wave at 917
KHz. For generating the other tone, I am using the same home made DDS
generator as before. At this lower frequencies the signal generated by
I was, Julian - tnx for the clarification!
John AE5X
http://www.ae5x.com/blog
Julian, G4ILO wrote:
When I read John's post, I thought he was talking about spotting i.e.
*observing* what frequency the last guy to work the DX was on so he could
call on exactly the same QRG. I didn't think he
* On 2010 24 Nov 12:40 -0600, Jim Cox wrote:
I vote no on this option..
I'd be fine with such an option so long as it is configurable.
73, de Nate N0NB
--
The optimist proclaims that we live in the best of all
possible worlds. The pessimist fears this is true.
Ham radio, Linux, bikes,
- Original Message -
From: Guy Olinger K2AV olin...@bellsouth.net
All the rigs in the pictures are K3's. The clue is the carrying strap +
size, or the strip of light gray buttons on the right front panel + size.
73, Guy.
Given that three of the Germans plus SP5XVY were members of
Would someone please explain the purpose and function of the low cut and high
cut controls on the K3? There doesn't seem to be any explanation I can find in
the current user's manual and I'd like to make sure I'm understanding their
function correctly because the response I see on the P3
Gary,
See page 14 Filter Controls and page 23 Filter Passband Controls of the
Owner's Manual.
Mike, ks7d
On Nov 24, 2010, at 3:53 PM, n6...@cox.net wrote:
Would someone please explain the purpose and function of the low cut and high
cut controls on the K3? There doesn't seem to be any
You do know that you cannot do valid IMD sweep measurements with AGC on?
First thing I have to do for any measurements is turn off the AGC and set
fixed levels. Particularly very fast config of fast AGC won't work. It
won't be valid for absolute measurements, but the bandwidth needs to be at
Tonight i enjoyed (really) the first tests of my k2 #6995. The anxious moments
in which i gave the power supply for the first time to' my baby.no smell,
no smoke!! WOW
What a music for my ears those clicks from the relays, what a beautiful green
that wonderfull display, what smoothness that
Thanks Guy for the explanations about IMD measurements. I need a signal
generator to do better tests and get rid of the need of receiving a
broadcast carrier. I was thinking in building a simple Xtal oscillator
and some attenuators.
73, Ramiro. EA4NZ
Guy Olinger K2AV escribió:
You do know
* On 2010 24 Nov 14:55 -0600, n6...@cox.net wrote:
Would someone please explain the purpose and function of the low cut and high
cut controls on the K3? There doesn't seem to be any explanation I can find
in the current user's manual and I'd like to make sure I'm understanding
their
I see that the question has been answered, but I would like to tell you how I
find the answers to questions about operating the K3.
I keep a copy of the LATEST K3 operating manual on my desk-top (computer).
When I get confused about how something works or want to learn what it's for, I
use the
On 11/24/2010 8:30 AM, Phil Kane wrote:
On 11/24/2010 7:42 AM, Barry wrote:
Every few days, I walk back into the shack and see the Blue
Screen of Death on my monitor. it says, Hardware malfunction
Parity Check/Memory Parity Error. I'm using a Dell Inspiron
laptop with WinXP.
Any ideas?
Nate,
Your explanation is excellent.
One of the things I miss in the Rice Box Radio manuals are the diagrams used to
describe this type of thing. Sometimes a picture really is worth a thousand
words.
73,
Tom Childers
Radio Amateur N5GE
Licensed since 1976
QCWA Member 35102
ARRL Life Member
* On 2010 24 Nov 12:37 -0600, Claude Du Berger wrote:
Hello group
Is it normal while turning the Main VFO Knob I hear
some noise like friction? no there is not too much friction.
Yes.
I dont hear such noise on my old IC-746
The K3 uses a fiber disk to provide the friction. The result is a
One advantage of assembling the K3 from a kit is that you learn how it is built
mechanically, which is often useful. Assembly is really easy, though I
recommend buying a nice, new number 0 Phillips screwdriver.
73,
Scott K9MA
On Nov 24, 2010, at 2:48 PM, Nate Bargmann wrote:
The K3 uses
I got the same issue and mine is a factory build. Doesn't seem to be hurting
anything, however.
- Original Message -
From: elecraft-boun...@mailman.qth.net elecraft-boun...@mailman.qth.net
To: elecraft@mailman.qth.net elecraft@mailman.qth.net
Sent: Wed Nov 24 14:48:05 2010
Subject: Re:
Hi K3 fans
Speaking about HI and LO Cut controls. I have notice this:
Tune a carrier at for example, 1 KHz tone.
Set a computer waterfall with enough frequency resolution to see few Hz
changes
Play with HI and LO Cut controls up and down (of course, let the 1 KHz
signal pass trough the
* On 2010 24 Nov 15:44 -0600, Amateur Radio Operator N5GE wrote:
Nate,
Your explanation is excellent.
Accept my humble thanks. :-)
One of the things I miss in the Rice Box Radio manuals are the diagrams used
to
describe this type of thing. Sometimes a picture really is worth a
I assume you meant Aix-en-Provence :^)
It's been a few years but when I took my K2 to Europe the TSA folks ran it (in
a case) through the X-ray and then past some other sort of scanner. They
didn't ask what it was or have me remove it from the case.
Check the ARRL website for CEPT
* On 2010 24 Nov 16:04 -0600, Ramiro Aceves wrote:
Hi K3 fans
Speaking about HI and LO Cut controls. I have notice this:
Tune a carrier at for example, 1 KHz tone.
Set a computer waterfall with enough frequency resolution to see few Hz
changes
Play with HI and LO Cut controls up and
What fiber? Mine was a kit and the material was definitely felt washers (2
in the kit).
I could never get the feel I wanted and didn't like the sound either. I
replaced the washers with a single, larger homemade felt washer that just fits
the recess in the knob and is glued in, so there is
Well, I removed the knob and the felt washer... and just turning
the shaft with my fingers I can hear the friction noise. Of course that
is with the RX muted, computer off in a quiet shack. Maybe I have
a bad encoder...
73 de Claude VE2FK
K3# 3889
- Original Message -
From: Nate
I mentioned the use of K3 in ZL8X in this mail reflector well before hand.
I attended the Asia Pacific DX Convention http://apdxc.org on 7 Nov 2010 when
SP5XVY gave his presentation of ZL8X.
All the radios in teh ZL8X are K3.
cheers,
Johnny VR2XMC
- 郵件原件
寄件人﹕ Milt, N5IA
I experienced a tightness at one place during the VFO A rotation. Removing
the knob and repositioning the felt washer did not fix it. I removed the felt
washer, the three screws holding the clear plastic plate, two VFO shaft nuts,
carefully shifted the shaft of the encoder to make sure it was
I'd suggest downloading the Ultimate Boot CD and running Memtest86 for 24
hours. Usually when there are memory errors, they will happen immediately, but
if it does make it past the first few minutes a 24 hour burn in sometimes will
throw some errors, which still means there is bad memory in
I'd rather have dual manual notch capability like the IC-7000...
On Wed, Nov 24, 2010 at 12:49 PM, Nate Bargmann n...@n0nb.us wrote:
* On 2010 24 Nov 12:40 -0600, Jim Cox wrote:
I vote no on this option..
I'd be fine with such an option so long as it is configurable.
73, de Nate
All reports so far indicate the notch problem is fixed. Thank you to
those who took the time to test and tell me the results.
I won't be sending out any more special file sets. The Beta should be
updated next week sometime with this fix.
73 es Happy Thanksgiving,
Lyle KK7P
From the sound if this, you do not have a second VFO, me too.
Why not use A-B and then hold A-B for SPLIT and tune the B freq up the
desired offset amount with the second VFO knob?
You'll see the TX arrow pointing down to the B frequency to be sure you
are running SPLIT.
Before I learned to do
Grin...a mile wide...
Heard ZL8X calling CQ so I thought heck, why not...went back on my Double
extended Zepp and busted through on the first try...oh yeah..pass the
kool-aid folks...how does it get any better than this?
Without a K3 and the ever trusty toolbox supplied as standard I doubt I
It's now on the Elecraft web site.
http://www.elecraft.com/manual/P3_Pgmrs_Ref_Rev_A2.pdf
By the way, P3 Utility includes macro buttons for the P3, so you can
program your favorite setups and select them with one button press. See
P3 Utility's Help for more details.
Alan N1AL
On Wed,
I tried using my beverages with the K3 for the first time this evening.
When I transmit (100w...no amp), the output on the K3 goes nuts and
starts peaking up well above 100 w. It kept doing it until I
disconnected the beverage and power cycled the K3. I know I am not the
only fellow using
When our plasma TV is on it has a very strong interference that no
combination of the NB, NR, or Filters have any effect on the K3.
I am wondering if an active audio filtering system such as the DHL out
of England may help.
I have searched the web for ideas and I have not found anything for
I use the dual manual notch a lot with my 7000, we can only hope.
On Wed, Nov 24, 2010 at 6:33 PM, Tim Tucker wrote:
I'd rather have dual manual notch capability like the IC-7000...
On Wed, Nov 24, 2010 at 12:49 PM, Nate Bargmann n...@n0nb.us wrote:
* On 2010 24 Nov 12:40 -0600, Jim Cox
Don,
Plasma TVs are like that - sounds like you need to line up for the Black
Friday deals on TVs on Friday :-)
73,
Don W3FPR
On 11/24/2010 8:10 PM, gold...@charter.net wrote:
When our plasma TV is on it has a very strong interference that no
combination of the NB, NR, or Filters have any
If you are a K3 owner/operator, you may be interested in a new iPhone
application. I call it the K3 Micro Manual as it incorporates most of the K3
Owner's Manual in a handy iPhone format. It is compatible with iPhone (iOS
3.1.3 and later), iPod Touch and iPad. It has been updated to include the
A quick question. I have a Heil Proset headset into the front of the K3.
Sometimes when I fire up my ACOM 1000 amp I experience the following problem. I
am running the K3 PTT relay thru an LP-100 and then into the amp, with a
Palstar
tuner on the output side from the amp. SWR is about 1.2
My preferred way of doing this is a macro:
SWT13;SWT13;FT1;UPB5;RT0;XT0;
I have this assigned to my PF1 key and when a station says they are listening
up I just hold PF1 and am ready to go.
This macro sets the split to 2 Khz but you can change the value of UPB to
whatever your preferred
Its my wifes TV I have to live with it.
On Wed, Nov 24, 2010 at 8:41 PM, Don Wilhelm wrote:
Don,
Plasma TVs are like that - sounds like you need to line up for the
Black Friday deals on TVs on Friday :-)
73,
Don W3FPR
On 11/24/2010 8:10 PM, gold...@charter.net wrote:
When our
Dave,
Put a balun on your antenna.
Seriously, that is likely being caused by RF in the shack, and the
only cure is to work on your antenna system to minimize it.
73,
Don W3FPR
On 11/24/2010 9:08 PM, david beckwith wrote:
A quick question. I have a Heil Proset headset into the front of the
I think it is time to dump the plasma tv.. They are nothing but RFI
generators... Certainly not compatible with Amateur Radio...
Jim K4JAF
'
- Original Message -
From: Don Wilhelm w3...@embarqmail.com
To: gold...@charter.net
Cc: elecraft@mailman.qth.net
Sent: Wednesday, November 24,
Thanks Nate. The audible effects are as I expected them to be when adjusting
low or high cut but the visual representations on both the K3 and the P3
were not and had me a bit confused. I'll continue to experiment.
73,
Gary
-Original Message-
From: elecraft-boun...@mailman.qth.net
For the first year or so after assembly my main tuning knob just made a very
faint noise that was smooth and consistent. However, beginning around last
Field Day, the knob has tended to stick in certain spots, accompanied by
much louder noise. This happens only when I press on the knob, as is
So buy her a new TV for Christmas. Seems a simple enough solution to
the problem. Have it turn out that her present TV has some sort of
radiation leakage problem or something, and you're only looking out for
her.
- Jim, KL7CC
gold...@charter.net wrote:
Its my wifes TV I have to live
Thanks for your info Erik.
Here, even after removing the knob and felt washer, turning
the shaft with my fingers make the same noise. Maybe I am not lucky
and will have to change the converter ?..
73 de VE2FK
- Original Message -
From: Erik Basilier
To: Elecraft@mailman.qth.net
* On 2010 24 Nov 20:34 -0600, Gary wrote:
Thanks Nate. The audible effects are as I expected them to be when adjusting
low or high cut but the visual representations on both the K3 and the P3
were not and had me a bit confused. I'll continue to experiment.
The display only has a relatively few
These days when I buy *any* appliance it's with the understanding I can get
a full refund if I find it creates RFI issues.
Frustrating that our current laissez-faire approach to business in America
has robbed the FCC of any ability to put a stop to these emitters.
Ron AC7AC
-Original
Amen, take it back if RFI. And stay away from Plasma TVs...
Jim K4JAF
- Original Message -
From: Ron D'Eau Claire r...@cobi.biz
To: elecraft@mailman.qth.net
Sent: Wednesday, November 24, 2010 8:59 PM
Subject: Re: [Elecraft] Plasma TV Noise any ideas on how to filter it out.
Gary,
The HiCut and LoCut are quite useful for SSB. To maintain
intelligibilty while the width is narrowed, the low end must remain at
about 300 Hz, while the High end can be reduced dramatically.
For use with CW, the shift and width controls are more useful - just
reduce the width, and
Curious thing I noticed today; plugged in my headphones only to continue
hearing monoraul audio coming out of my PC's speakers. It took me a second
to realize that audio from the K3 was being piped out of the LINE OUT jack
in the rear, into my PC's input, and out to the two speakers I have
Tis true they are RFI generators, but plasma black levels are still much
better than LCD, LCOS, or DLP sets. Only thing that's better in that area
are tube televisions.
As a movie buff, I can't stand black crush, so I live with my Panasonic
plasma. When I do QRV, the fix is simple; I turn the
All,
An active noise cancellor such as the JPS ANC-4 may
really help. You have to stop or minimize the noise before
it gets in to the radio.
Place the ANC-4 sense antenna as close to the offending TV
as possible and then adjust the controls for best noise
reduction.
73,
Gene K1NR
I can't download the newer MCU or FPF software updates for some reason.
I'm using Utility 1.3.11.5 but when I check for updates the latest I get are
MCU 4.14 and FPF 1.13 ... could it be these are the latest updates that
aren't Betas? Or am I doing something wrong?
Thanks!
Dick- K9OM
My pet hate!
My 3 next door neighbours each have at least 2 of the damned plasma TV's.
There is not alot you can do except to complain to the FCC / ACMA / whatever
your liocencing body is called about the interference.
There's a reason that they (Plasma TV's) have been banned in the EU zone, now
I'm on the road and can't check but my belief is that 4.14 is the latest non
beta.
Dick, K6KR
On Nov 24, 2010, at 21:49, r...@aol.com wrote:
I can't download the newer MCU or FPF software updates for some reason.
I'm using Utility 1.3.11.5 but when I check for updates the latest I get
EC2 Enclosure, SOLD
H. Michael Pierce
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
I had the same problem with a long earth lead.
David
G3UNA
- Original Message -
From: Don Wilhelm w3...@embarqmail.com
To: david beckwith david.beckw...@att.net
Cc: elecraft@mailman.qth.net
Sent: Thursday, November 25, 2010 2:21 AM
Subject: Re: [Elecraft] PTT stuck? Error?
Dave,
This is a great service to K3 owners with iGear, Mike -- thanks.
I'll put you on the short list for owner's manual update notices.
73,
Wayne
N6KR
http://www.elecraft.com
On Nov 24, 2010, at 5:42 PM, Michael Downs k...@verizon.net wrote:
If you are a K3 owner/operator, you may be
h...@all
10 exciting days with:
13300 qsos
up to 38c and lots of dust
countless powercuts
a uncomfortable ride in overcrowded overhead compartments (perfectly
sheltered by RosesKen's bag)
K3 is back at home now and still in perfect shape. Thank you Elecraft!!!
73, Juergen Jo (dl4maq)
cw
There's a reason that they (Plasma TV's) have been banned in the EU zone...
I didn't know that. I wish they'd ban them in Canada.
I had a neighbour 2 years ago who bought a plasma TV - drove me crazy on
160 through 30 meters. They moved away a year later :-)
But wait, there's more - a new one
94 matches
Mail list logo