You can also click the 'Go' menu on the Finder and hold down the Option key
(alt key) and it will so the Library as an option (doesn't matter if you hold
Option before or after you display the menu).
Once open you can put it on your sidebar. Lots of other possibilities to get at
Library,
Here's another happy Lion user who took maybe two days to get used all the new
things. Although you can set many things, such as reverse scroll and Mail.app's
appearance back to the way they used to be, I left them as is and got used to
them. Now I'm glad I did. I even bought a Magic Trackpad
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I put a 4 computer case fan on my K2/100 heatsink.
I run digimodes in addition to CW with my rig so needed the extra
cooling. I installed the fan with some double sided foam tape on the
corners of the fan. I installed the fan so it blows up, pulling
Dave,
Yes, you should read 6.8 volts to ground at the C4 D3 junction.
Make certain you have voltage at both ends of R15. If you do, then
check the soldering carefully in the upper left quadrant of the board.
73,
Don W3FPR
On 7/23/2011 1:00 AM, KJ4YQK wrote:
R13 is not adjusting anything. 0
Hi Don,
Tnxs for the reply. I broke a resister R14, lifting one end to read. It
check good before the lead broke off. Head to Radio Shack to pick up a new
one. I did not get the 6.8 volt at the C4 D3 Junction. I will retouch the
solder joints with the iron to see if it comes back.
Here's a problem I've found with Time Machine and Lion:
If you use a Time Machine server, such as Seagate's BlackArmor NAS drive, or
any of a number of NAS drives that support Time Machine, Apple has changed the
protocol it uses for connection to such devices in Lion. Most, if not all of
these
Hello- I am trying to get MMTTY and my k3 working. I have found a setup
page for k3 and mmtty and have went threw the pages twice and have all
of the setting as stated at http://www.n3me.net/elecraftk3andmmtty.htm.
My rig will key, but not for sure if it is transmitting rtty. The pwr
meter
David,
If you found zero volts at D3, then R12 is not fully soldered. OTOH, if
you found close to 12 volts, D3 is not doing its job.
Good luck on finding parts at RS if it is anything like the store in my
area.
73,
Don W3FPR
On 7/23/2011 9:38 AM, KJ4YQK wrote:
Hi Don,
Tnxs for the
I've made it a policy to hold off upgrading an OS unless and until a
key software element or application will no longer function with the
older OS. It's the old If it ain't broke, don't fix it idea.
73 de Ray
K2ULR
__
Elecraft
On Sat, Jul 23, 2011 at 4:08 PM, km5ps jmc...@km5ps.com wrote:
Hello- I am trying to get MMTTY and my k3 working. I have found a setup
page for k3 and mmtty and have went threw the pages twice and have all
of the setting as stated at http://www.n3me.net/elecraftk3andmmtty.htm.
My rig will
I have FOR SALE a NEW IN BOX MicroHam MKII Keyer with the K3 cable assembly. It
is less than 30 days old and the reason for selling is that I have hooked up my
RigBlaster instead. FREE SHIPPING, discounted $329.
Craig, AH8DX
ah...@msn.com
Anyone want to sell their P3? Going to buy one, used or new.
Phil
Philip LaMarche
LaMarche Enterprises, Inc
mailto:p...@lamarcheenterprises.com p...@lamarcheenterprises.com
http://www.lamarcheenterprises.com/ www.LaMarcheEnterprises.com
727-944-3226
727-937-8834 Fax
John,
I just looked at the instructions on that link. One thing that is not
mentioned on the K3 setup is that you must set the K3 mark frequency and
shift to match the mark frequency and shift settings in MMTTY - to do
that, while in DATA A mode, hold the PITCH button and rotate VFO A to
On 7/23/2011 2:30 PM, Don Wilhelm wrote:
I believe those instructions have an error - it seems to tell you to set
Ways to send to Character out - which would send KY commands with
ASCII text to the K3. I believe Ways to send should be set to Line
Out instead.
This is a case where English
The weekly Elecraft SSB net will meet tomorrow (7/24/11) at 1800Z on 14.3035
MHz +/- QRM. I will be net control from finally summery Oregon, and we'll
try
relays to pull in the stations that I can't hear. See you there.
73,
Phil, NS7P
Yes and thanks for noticing, I did mean AFSK A, sorry for the confusion
- the mark frequency will not show in DATA A.
I am copying the reflector on this email so all can see the correction.
On 7/23/2011 3:13 PM, K2MK wrote:
Hi Don,
Don't you mean AFSK A for RTTY, not DATA A.
73,
Mike K2MK
I'm doing the calibration step in the TX Gain Calibration section. I
hook my mac up to the K3 via the serial to USB cable, attach the dummy
load, run the K3 utility (Calibration-Calibrate Transmitter Gain),
and get the following results.
---
Starting 5 watt calibration.
Calibrating at 1.900 MHz
Nevermind. I ran it a second time with advanced and verbose logging
and it worked fine.
Thanks,
On Sat, Jul 23, 2011 at 3:42 PM, Shane
software.research.developm...@gmail.com wrote:
I'm doing the calibration step in the TX Gain Calibration section. I
hook my mac up to the K3 via the serial to
I had a similar problem but I just ran it again (and maybe again) and it
worked.
By the way TX mode test/normal is the transmit disable/enable toggle,
which you work by holding down the right side of the MODE switch (upper left
of K3 front panel). Test disables the transmitter (so you can
Has anyone used the P3 for an external signal finding or noise
finding tool?
I was wondering if a tuned circuit for 1.8 mhz fed into the input
with the IF set for 1.8 would be enough to show any signal?
I need to locate a signal on 160 meters that is caused by two BC
stations mixing due to a
Having run 3 RTTY contests this year already with the KPA500 i have had no
issues running it at the 500W output. No derating was needed.
when the manual said 500 watts output it meant it... without any fine
print exclusions
Dave
ww2r
Date: Thu, 21 Jul 2011 02:02:58 -0700
From: David Yarnes
The Microham MKII I had for sale is now sold. Tnx to all that replied.
Craig
Sent via BlackBerry from T-Mobile
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Good Evening,
The weather has gotten warmer. After tomorrow I will have had 5 days
above 70 degrees. The forecast was for 80 degrees but that has been
revised downward to 76. It got all the way up to 75 today with a lot of
sun. Very warm now. However, on Monday the temperature goes
On 7/23/2011 1:30 PM, Don Wilhelm wrote:
John,
I just looked at the instructions on that link. One thing that is not
mentioned on the K3 setup is that you must set the K3 mark frequency
and shift to match the mark frequency and shift settings in MMTTY - to
do that, while in DATA A mode,
I'm guessing this effect is an artifact of the AGC parameters and
the level of ambient noise. I would love to see a chart of AGC
level, K3 gain, and RFG bias voltage.
I see a flat zone between RFG at maximum and at 3-o'clock position
when I either have no preamps activated and when I activate
Yes, it would probably work. But I recall reading a note from Eric that there
is no static
protection for the 'antenna' input and it is /very/ easy to blow the front end
connecting
it to external things -- so be careful.
On 7/23/2011 2:56 PM, Merv Schweigert wrote:
Has anyone used the P3 for
The K3 gives out a great new one to the deserving. Here's one of the pix on
their website:
http://www.dxfriends.com/SouthernSudan2011/photos/preparations/Testing_K3.jpg
The pileups are monumental! Bill, W4ZV, posted some cool tips for tracking
down the listening freq using CW Skimmer. I was lucky
There has been an ongoing discussion on the AMPS reflector regarding the
Freescale LDMOS devices currently on the market. A pair of these in an
HF amp with a 48V SMPS would be an excellent start.(hint,
hint...KPA-1500).I wish I was retired and had some time on my hands :)
Check this
I have considered using the P3 with my mobile K3 for noise hunting, but my
thought was to use it with a K3, not with a direct input to the P3 from an
antenna. I think that might be a good idea if you ran across a strong signal.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA
We do NOT need any more big amplifiers, they are the reason the sunspot
cycles have been worn out :-)
73, Jack VK4JRC
On Sun, Jul 24, 2011 at 1:28 PM, Gary K9GS garyk...@wi.rr.com wrote:
There has been an ongoing discussion on the AMPS reflector regarding the
Freescale LDMOS devices
Phil,
I don't think that putting a P3 on top of a K3 is a good idea for a couple
of reasons.
First of all, the P3 is more than half the width of a K3, so having it on
top will block the speaker and the K3's vent slots.
Secondly, I don't think it will be convenient to watch. Your eyes
Hi Ed..I just did a check using the XG3. tap the disp button to display
AFV
I do not see a drop in voltage untill I turn the RF knob to about the 3:00
o'clock position.
so it seams that untill the RF knob gets to there, there is no gain
reduction untill we get past that point.
and at
32 matches
Mail list logo
