The KX3/KXPA100-AT have been sold.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FS-KX3-and-KXPA100-AT-tp7583423p7583632.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing
How big is the check you are willing to send? I have no inside track on
pricing, but as an engineer, and estimating the size of the market, and what
you are asking I don't think that 10 grand would be unreasonable. Would you
still want to jump in line at that price, maybe higher? Or are you
The 4.81 firmware release notes as downloaded from the FTP site show
only the following for version 4.81:
* XVTR IF BAND CAN NOW BE 10 OR 18 MHZ (in addition to the original
selections).
Expansion of the release notes at least to list the steps to set the CW
XFIL LO would be appreciated.
73,
Oops, I now see that the necessary information is listed in the release
notes, but under an earlier beta that I seem not to have.
Sorry.
73, Paul W8TM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Mark,
Messages to you are bouncing ...
Do you have an alternate e-mail address?
73!
Rose -N7HKW
elecraftcov...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hello
I have my KPA500 placed over the KAT500 (probably like many other users) and
I'm using the Elecraft DB15/DB15 original cable (the first model about 1 cm
diameter, I heard the new cable model has less diameter and is more flexible
but the length is the same).
It happens I have a mess behind
Hi,
Nobody has responded to your post, so I'll hop in with what I know.
Congratulations on your new k3.
I have that birdie, on USB it zero beats at 14,026.3, on LSB at 14,018.9
kHz. It's a fast tuning birdie, very weak and completely inaudible with a
real antenna. But I am curious about your RF
Paul,
The release notes are cumulative. If it was included in an earlier
firmware (whether beta or production), then it is also included in the
higher numbered version - unless it is specifically retracted.
The only exception would be a beta version that does not reach
production status (and
Oops, typo. On LSB it zero beats at 14,028.9, not 14,018.9.
Knut - AB2TC
ab2tc wrote
Hi,
Nobody has responded to your post, so I'll hop in with what I know.
Congratulations on your new k3.
I have that birdie, on USB it zero beats at 14,026.3, on LSB at 14,018.9
kHz. It's a fast tuning
On 2/3/2014 10:25 AM, Gary Smith wrote:
I haven't worked RTTY since 1982 or so and have a K3. I've read the
info here:http://www.elecraft.com/K3/k3_operating_tips.htm#RTTY and
then the section on RTTY operation without a computer. And the pages
suggested in the manual.
I've done this, but
At least for 1296, that's not possible at the moment.
DEM is redesigning their transverters for this band.
No idea when it will be available.
73 de Jim - AD6CW
On 2/3/2014 7:47 PM, riese-k3...@juno.com wrote:
to down east microwave
Bob K3DJC
On Mon, 3 Feb 2014 20:22:40 -0500 (EST)
That's strange, I updated mine this pm and I had all the required info!
Ken.. G0ORH
Sent from my iPad
On 4 Feb 2014, at 15:30, Paul Kirley pkir...@fuse.net wrote:
The 4.81 firmware release notes as downloaded from the FTP site show
only the following for version 4.81:
* XVTR IF BAND CAN
Trade KWM-2A with 312b5, 516f2, Nb, Q mult with manuals, cap kits, spare
tubes crystal pack. All work FB. Need KPA500 and KAT500.
73
Jim K5AUP
In a message dated 2/4/2014 1:49:56 P.M. Eastern Standard Time,
elecraft-requ...@mailman.qth.net writes:
Send Elecraft mailing list
www.lulu.comhttp://www.lulu.com is offering a 14% discount on all books. I
don't know how long it is for, maybe until Valentine's Day?
73 all,
Fred KE7X
The Elecraft K3: Design, Configuration and Operation 2nd ed
The Elecraft KX3 - Going for the summit
www.ke7x.comhttp://www.ke7x.com or
I am having trouble with the K-3. When I xmit for a period of time the
Display starts to fluctuates with the modulation in my voice. The longer I am
on the more rapidly it fluctuates till it shuts down the K-3. I have removed
all external cables and even done this with a dummy load. I have a
Gerald,
Have you checked the power cable? Are the connector blades of the APP
connector fully inserted and locked over the locking blades in the housing?
Are the connections to the power supply tight?
Too much resistance in the power cabling (due to loose connections) can
cause exactly what
I installed the utility and installed what I think is the driver via CDM
c2.08.30 WHQL Certified.exe
I connected the KUSB cable to the K3’s RS232 port. I started the utility and
selected COM3 as it was the only choice.
The utility cannot find the K3.
What am I missing?
Carl Yaffey K8NU
Banjo,
check the utility baud rate is set correctly to match the k3's baud rate
CONFIG RS232
On 2/4/2014 3:06 PM, Carl Yaffey wrote:
I installed the utility and installed what I think is the driver via CDM
c2.08.30 WHQL Certified.exe
I connected the KUSB cable to the K3’s RS232 port. I started the
I found the correct driver and I’m up and running.
73
Carl Yaffey K8NU
Banjo, guitar, bass, mandolin, dobro.
recording studio.
cyaffeyno_s...@gmail.com
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
Assuming Windows, what does device manager say about the port? No other
program is using the port, right? Have you tried a reboot of the puter? Is the
DB9 firmly attached to the K3? When you plugged the USB cable into the 'puter
did Windows recognize it?
That's all I got
73 Mike NF4L
I think the k3 Utility will match whatever the K3 is set to. AFAIR, it cycles
thru all the baud rates.
73, Mike NF4L
On Feb 4, 2014, at 4:19 PM, Sam Morgan k5oai@gmail.com wrote:
check the utility baud rate is set correctly to match the k3's baud rate
CONFIG RS232
On 2/4/2014 3:06 PM,
That's correct.
Some of our utilities operate at only speed supported. (XG3, K144XV, and
W2).
When the radio, amp, ATU or panadapter offers several choices, we find the
RS-232 speed as you have indicated.
73 de Dick K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
Mike,
That may be true, but if the P3 is in place, the K3 rate must be set to
38,400 or some things will not work together. I don't know whether a P3
is involved in the original post or not.
73,
Don W3FPR
On 2/4/2014 4:25 PM, Mike Reublin wrote:
I think the k3 Utility will match whatever
Rick:
Checked the connections. All are good now. Spread the spades on the
PowerPoles on all connections and tightened the Ground and made the power
connections tighter. Seems to work fine now. Just contacted a Bloke in
Montreal Canada and it seemed to work fine. When transmitting
On 2/3/2014 10:25 AM, Gary Smith wrote:
I haven't worked RTTY since 1982 or so and have a K3. I've read the
info here:http://www.elecraft.com/K3/k3_operating_tips.htm#RTTY and
then the section on RTTY operation without a computer. And the pages
suggested in the manual.
I've done
Along that same line as Don suggests you look at; do you have a power
supply with a variable voltage current? I have an Astron with both
on the front panel and I was having troubles till I realized I had
bumped the controls to the PS and that was my problem.
73,
Gary, KA1J
Gerald,
Have
Punch the DISP button and dial up the power supply voltage via the B
knob.
That way you can check to see if you are getting good power. A drop of
a few tenths of a volt on TX is normal.
73 Jack KZ5A
On 2/4/2014 2:32 PM, gmuller...@aol.com wrote:
I am having trouble with the K-3. When I
Hi,
I have had a similar problem with my KX3 after installing the KXBC3
Internal NiMH Charger / Real-Time Clock.
I guess I made a mistake when I closed the KX3 cover and I damaged the Flex
Cable (E980219).
The KX3 is working fine in the most of the time, however, intermittently I
get the messages
True, Don and good point. But the utility still does the seek. It's not
possible to match the utility and K3 manually.
Mike NF4L
On Feb 4, 2014, at 4:45 PM, Don Wilhelm w3...@embarqmail.com wrote:
Mike,
That may be true, but if the P3 is in place, the K3 rate must be set to
38,400 or
Great!
Mike NF4L
On Feb 4, 2014, at 4:19 PM, Carl Yaffey cyaf...@gmail.com wrote:
I found the correct driver and I’m up and running.
73
Carl Yaffey K8NU
Banjo, guitar, bass, mandolin, dobro.
recording studio.
cyaffeyno_s...@gmail.com
614 268 6353, Columbus OH
you are quite correct,
just goes to show I am playing with to many different pieces of software
that aren't as smart as elecraft's utils g
On 2/4/2014 3:25 PM, Mike Reublin wrote:
I think the k3 Utility will match whatever the K3 is set to. AFAIR, it cycles
thru all the baud rates.
73,
Ricardo,
With a damaged flex cable, whatever error messages you receive are
probably due to the damaged cable.
Wait until you have the replacement cable before concluding that other
problem may exist.
73,
Don W3FPR
On 2/4/2014 6:43 PM, pu2clr wrote:
Hi,
I have had a similar problem with my
Hi Don,
I am afraid you are right.
If so, I have no idea how to repair it.
Replacing the RF Board or CP will be a bit complicated from Brazil.
I have tested the demaged cabe with a multimeter and apparently there is no
reason for this symptom.
I mean, despite the appearance of the cable, it
Ricardo,
If the new flex cable does not fix the errors, contact
supp...@elecraft.com for further assistance.
73,
Don W3FPR
On 2/4/2014 9:30 PM, pu2clr wrote:
Hi Don,
I am afraid you are right.
If so, I have no idea how to repair it.
Replacing the RF Board or CP will be a bit complicated
Check voltage to radio at full power.
...bill nr4c
Sent from my Verizon Wireless 4G LTE DROID
gmuller...@aol.com wrote:
I am having trouble with the K-3. When I xmit for a period of time the
Display starts to fluctuates with the modulation in my voice. The longer I am
on the more rapidly
Anyone have any problems with the new Firmware. I installed the firmware
updates on the K3, KPA500, and KAT500 tuner. I had problems with the K3
after the update. There was some kind of problem with the power output.
For starters I could not adjust the power out while the rig was keyed.
For
I could not reproduce this problem.
I have the latest firmware (including beta releases) on all of my K-Line
(K3, P3, KPA500, and KAT500).
73, Tony K4QE
On Tue, Feb 4, 2014 at 10:39 PM, Steve AI9T st...@ai9t.com wrote:
Anyone have any problems with the new Firmware. I installed the firmware
The CW Machine is sold.
73 Attila DC0ED
--
Message: 21
Date: Tue, 4 Feb 2014 08:31:33 +0100 (CET)
From: dc...@gmx.net
To: elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft KX3 with many options and Begali CW
Machine with CW Trainer option for sale (only
38 matches
Mail list logo
