I have a W2 Wattmeter with DCHF-200 Directional Coupler excess to my needs.
Excellent condition and just checked out by Elecraft. $180.000, including CONUS
shipping. Contact me off-list at k8...@arrl.net.
73' Ed - K8DSS
__
Elecraft
W2 has been sold.
Ed - K8DSS
> On Sep 23, 2015, at 8:17 AM, Ed Gansen wrote:
>
> I have a W2 Wattmeter with DCHF-200 Directional Coupler excess to my needs.
> Excellent condition and just checked out by Elecraft. $180.000, including
> CONUS shipping. Contact me off-list
The manual doesn't indicate that you can't have both the USB and RS232
connected at the same time. In fact the manual states that you can connect
the RS232 specifically for PTT. The RS232 isn't going to be used for rig
control, only PTT. If this is an unacceptable configuration on the K3S then
the
What I'm trying to do:
1. USB for audio and serial control.
2. RS232 for PTT keying.
Everything is the same power, I'll pull the cover and reconnect everything
at lunch and see what I get.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lyle
Here is the update on the No RX/NO TX problem with my K3. It was the
new KSYN3A Synthesizer as, I suspect, has died. It would not do CAL but
gave Error: E 00044 ERR VC4. It was installed the first day of
summer and died on the last day of summer!
Thanks to all who gave thoughts and
I was making the assumption that the situation in the K3S was similar to
what would happen if you tried to connect two RS-232 ports together as
would happen if you used a "Y" cable. I know that will not work, and
because one driver can be trying to drive a positive voltage on the
signal at
No worries Don, I thought it should work as well. I'm just not keen on
having to repair/replace the I/O board on a rig I've had 1 week today using
the manual and supplied cable. Maybe I'm mistaken and I didn't smell
something in the rig. I've been in electronics since 1981 with formal
education
FWIW, the Elecraft Part # of the K1/K2/XV touch-up paint is E980100 and
is described as "Air Dry W/B Semi Gloss Granite".
73 de David G4DMP
In a recent message, Alan writes
>Interesting I didn't realize Elecraft sold paint. :=)
>
>However, the link to "Touch up paint for the K1
I have the Master Cable assembly for the Navigator Data Interface that has been
factory-configured for the Elecraft K3. Sold the Navigator and the buyer
didn't need the K3 cable. Works perfectly. Like new, $35 shipped USA. Direct:
mycall at swbell dot net.
Terry, W0FM
That won't work. Nothing will be damaged.
The input signal group TO the radio from the outside world (RTS, DTR,
serial data) are physically switched as a group between the RS232 buffer
chip and the USB<-> serial chip.
In USB mode, data to the radio, along with RTS and DTR, will only be
I can't get my P3 SVGA to turn on the waterfall cursor. I go to the menu
and tap the knob but no cursor appears. Suggestions please...
Firmware is up to date.
Smith
W9HAK
__
Elecraft mailing list
Home:
Ok, the manual is wrong. I got it..ty ;)
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lyle
Johnson
Sent: Wednesday, September 23, 2015 10:48 AM
To: ae...@carolinaheli.com; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S PTT using DTR/DTS
Thanks Don, and others. I guessed I missed the addition of the feature. I know
that a few of us were hoping for this feature a year or so ago and I confess I
have not paid much attention to the newest SVGA changes since I don’t have one.
Originally, it wasn’t supported. To sum it up then IF
Ralph,
That error message is applicable only to the old synthesizer, indicating the
new one has not been detected by the K3 firmware. Customer support will
immediately send out a replacement (please contact them to make arrangements).
We'd like to get the original back for analysis.
73,
Wayne
Anyone can help with macro or other option to turn on K3S. I have used the
alarm function but it clears if unit is already on, not sure if this is
normal. Using a pair of Remote Rig 1258 MKII works but only from that one
location, wanting to be able to turn on without the RRC unit such as from
I recently purchased an Elecraft K3S with a KDVR3 voice recorder. Is there
a way to activate the playback memories using Writelog?
John KK9A aka P40A
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
There's a tip in the ARRL's Sep23 "Contest Update"
about obtaining information from the DB15 VGA
connector on the rear of the K3. Look down the
page for a paragraph beginning with "If you're
dealing with rig signals from a K3".
This publication always has a variety of information
and URL's
We used 2x K3's and one KX3/KXPA100 for last field day. We started to get
bleed-in from the K3's into the KX3. Setting IF SHIFT = 8 fixed the issue
and no problems from then on out.
Due to space/coax constraints, the antennas were probably way closer than
they should have been, but other than
Dan,
NA3DX has used four kx3 rigs at the same time for 3A field day with ops
sitting right beside each other for the last few years. We have had no
issues following the guide outlined frequently by Wayne. Most of the time
the rigs where on different bands. But during Field Day, our GOTA station
Hi Smith,
The P3/SVGA waterfall cursor is incorrectly named, it should read 'waterfall
marker" in the release notes. The cursor is not shown in the SVGA
waterfall, but if you turn on Marker A or B, they will appear.
-Paul
--
View this message in context:
Ack, Typo! I meant RX SHIFT = 8. Need Coffee.
Frank
KG6EYC
On Wed, Sep 23, 2015 at 9:37 AM Frank Precissi wrote:
...
> Setting IF SHIFT = 8 fixed the issue and no problems from then on out.
>
>>
>> --
CW: NAQCC #6554 | SKCC #10435 | FISTS #16155 | SOC #1038 | FPQRP #3186
A friend is having an issue that I cannot resolve. I maintain the station
for an elderly friend who prefers CW, and often operates at about 40 wpm.
A while back he told me that his "E"s were too short, and hoped I could
change the timing or weighting, or whatever to "fix them". When I hear him
I think Ray is not the only one to suggest obtaining used VHF amps.
I owned one of the "brown" B1016, which is the older version, and it
didn't output 80w anymore but did a good job at about 65w. The
preamps in these VHF amps were never low-noise preamps but extra gain
did help some of the
Having done a few home metal bending jobs, I leave it to the
professional metal smiths if I need a nice enclosure. I use to have
access to a brake at work (retired five years). I also used to buy
some really nice enclosures from a K3 ham in the east who is now sk
(used in my 2m-8877 and CCI
Well, Don, I finally got both modules installed. Boy do I hate working
with TMP connectors in close quarters, especially the flimsily mounted
females on boards such as the K3RXA. But that's another story. Right
now, I seem to have a problem with the K144XV. I've installed it
according to
Why is are waterfall cursors not available? They would be much more useful
than the frequency spectrum display.
*Allan Zadiraka*
*AJ ZA**DIRAKA LLC*
4110 State RdAkron, OH 44319Work: 234-738-4578Cell:
330.760.4569Fax: 330.644.1839
On Wed, Sep 23, 2015 at 1:18 PM, Paul
Robert
Config menu, go to VFO LNK, move VFO A to cycle between ON/OFF
You can press and hold a programmable butoon as a shortcut.
I use Link when chasing expeditions with vfo B set 5kc up on ssb so a simple
press of the split button has my TX freq up 5.
Gary
-Original Message-
From:
Hello,
Here’s what’s left. They go in the trash Friday if nobody wants.
Take any or ALL for the price of posting it out to you.
Meanwhile Zverev LC filter manual continues on eBay … at lower price again
www.ebay.com/itm/201432548306
Alan D. Wilcox, W3DVX
570-478-0736 (cell, text)
This K3 doesn't have a sub-receiver. Somehow, VFO's A have become
locked, and I can't unlock them. Poured over the manual for an hour with
no joy. Directions appreciated. Thanks.
...robert
--
Robert G Strickland, PhD ABPH - KE2WY
rc...@verizon.net.usa
Syracuse, New York, USA
Early Alert for Elecraft list readers:
Our costs are going up as our vendors are increasing their prices to us and our
labor costs increase. Its been a continual battle to keep costs down as economic
activity has increased the last two years. We've been absorbing this, but now
we have hit
30 matches
Mail list logo