Found one, thanks.
On 1/1/16, 2:09 PM, "Brian Sheets" wrote:
>Does anyone have one they want to part with?
>
>Brian
>KA7KDX
>
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
​Larry
Here is John's web site.
http://johnwellingsmorsekeys.weebly.com/my-classic-morse-key.html
He makes a classic key like the Kent key, but nicer. He also makes a
Ericsson Swiss pump key " I want one of those too." and then I have the
first of the Marconi PS213 key he made.
His email is
It looks like a proxy in the middle is dropping your connection without
sending data, the recv() call failed. Since you got the 301 redirect
correctly, that indicates the Elecraft http server is able to at least
return headers, you're just having issues with the content body, which is
normally
> On Jan 3, 2016, at 7:07 PM, Larry W0LRF [via Elecraft]
> wrote:
>
> Great looking key,
> Where can a guy get one of these?
> Larry
> K3s 10531
> P3
>
>
> If you reply to this email, your message will be added to the discussion
> below:
>
Sounds like Verizon has a transparent proxy in the middle, and something is
goofing up there. Lots of ISPs do this kind of thing for content
filtering/caching/etc, unfortunately, and if that proxy doesn't serve the
page properly, it'll look like an issue with the site itself. Hopefully
they'll
Hi,
I am on 7 and I did succeed in finding "curl" and installing it. Here is the
output from running your suggested command line in a command prompt:
C:\Users\AB2TC\Desktop\Installs\curl\curl_7_46_0_openssl_nghttp2_x64>curl -v
htt
p://elecraft.com
* Rebuilt URL to: http://elecraft.com/
*
Wow, I had a big surprise this morning. I ordered 2 SP3's Wednesday PM 12/30.
(On-line)
Here's the shipping details.
Pickup: Watsonville, CA @ 3:01pm 12/31/2015
Delivered: White Hall, AR @ 10:13am 1/3/2016
That's it, USPS Priority Mail and SUNDAY delivery. (It was a holiday weekend)
Sure
Wow! That would (almost) make me want to use a straight key again.
Very nice!
--
Michael Murphy -KI8R
m...@ki8r.com
twitter.com/ki8r
www.ki8r.com
614-371-8265
--
> On Jan 3, 2016, at 9:41 PM, KC6CNN
Good point. I would think so.
73, Ron AC7AC
From: Catherine James [mailto:catherine.ja...@att.net]
Sent: Sunday, January 3, 2016 11:19 AM
To: Ron D'Eau Claire; elecraft@mailman.qth.net
Subject: Re: RE: [Elecraft] KPA100 has 0.1 w indicated, SWR 1.0 during tune
test
Wouldn't that
Try curl -vL http://www.elecraft.com
It's doing a redirect you need to follow, this should help.
David
On Sun, Jan 3, 2016 at 3:40 PM, ab2tc wrote:
> Hi,
>
> I am on 7 and I did succeed in finding "curl" and installing it. Here is
> the
> output from running your suggested
Don probably gave you the correct answer, he has consistently good
advice.
You might though want to also check your Astron, if it is one of the
ones with adjustable current & voltage, Mine is the VS-35M. The
adjustment knobs are easy to bump and unexpectedly change the voltage
or current
HI Cathy, Let's slip back to basics for just a sec, can you get QRP levels
from the K2 by itself? with the coax/dummy load connected to the back of the
qrp K2? With the power connected to the qrp K2 also, does the qrp power appear
as expected on the SO239 of the KPA100?One if these fail, that
It's beautiful, and I suspect sends CW almost as well as my old WWII J-38, Hi!
73, Ron AC7AC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
New Buddipole Deluxe Long version
along with the addition of the
Triple Ratio Balun Switch.
Bought and never used. Has been
sitting in a closet, thus the
outside of the bag is dusty.
Some of the items have been
unwrapped. Though nothing was
ever used on the air.
Covers 7-54 mHz, max power
Now I think it's the WSJT-X software rather than the radio because I can
get JT65 to work for a while and then it stops sending audio to the K3.
Fortunately it hasn't stopped in the middle of a QSO, but only in
between.
It could be somehow messing with the settings, but I really don't know
how
I just got off a fairly long chat with Fios service. They have entered a
trouble ticket on their network back-end and should have action in 24-48
hours. I was impressed with their willingness to take the responsibility
for the issue after a brief exchange of information. Not what I'm used to
I made e simple memory Editor: http://dl2rum.de/rumsoft/Elecraft.html
It programmed my K3 and KX3 once and it worked fine for me.
73 de Tom, DL2RUM
>
> Is there a memory editor for Mac? I ask because I have been using the K3
> Memory Editor on and off via Parallels for quite some time but it
Irwin,
The PA temp calibration is, as Don already stated, in the manual.
Just wondering, do your fans actually run?
The fans can be tested in de menu: KPA3.
If set to 'PA nor' then the fans are temp controlled.
If you turn the main dial, PA Fn1 - Fn4 will come on the display, You
should
I believe it is a Verizon issue as my DSL is out so I am not FIOS
Bob K3DJC
On Sun, 3 Jan 2016 10:30:42 -0700 (MST) ab2tc writes:
> Hi,
>
> Excellent work, Rick and well said about the relevance of this
> thread.
>
> I can also reach the FTP site. Another tidbit of
I am attempting the C1 adjustment to get correct SWR. Unfortunately, with a
dummy load on the SO239 port and the power knob set to 5w, pressing TUNE just
gives a beep followed by 0.1 1.0-1. Adjusting C1 has no effect at all. The
receive audio does cut out while tune mode is on, then reappears
Irwin,
OK, the power supply is one possibility, but the ERR+12V is more telling.
Is your K3 an older one? If so the pins which supply the 12V power to
the KPA3 may have been tin-plated. Those were changed to gold pins in
later K3s.
The symptom is the ERR=12V message and KPA3 turning off.
Hi,
I would like to ask a few questions to someone that has the Genovation
pad working on the K3 please...
If you would shoot me a note off list to "dave @ nk7z.net", with a phone
number in it, I would like to call for a short discussion about the
method of getting it to actually trigger the
Did you dislodge the connector on the coax between the KPA100 and the K2
main board? If in place, is it oriented correctly? While keyed, it can be
reversed by a clever person, Hi!
You can see that connector by simply removing the K2 side panel. Usually
take if off when replacing the KPA100 just
Wouldn't that (failure in coax confection to K2) prevent the receive from
working? I have good reception, but no TX.
Sent from Yahoo Mail on Android
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
In the RTTY contest, my K3 is turning off the 100W amp.
I set the FP Temp to 19C and the PA to Nor. I set the power to 60W output.
After contesting for a while, I would get a ERR=12V error and the rig would
shut off the 100W amp. The Circuit Breaker does not open. I switched out
Power Cords to
Hi,
Excellent work, Rick and well said about the relevance of this thread.
I can also reach the FTP site. Another tidbit of information that might help
them: A guy in southern California sent me an E-mail reporting he has the
same problem and several of his buddies in the area likewise. So it's
Setting up wsjt-x on the Mac is not as straightforward as the
instructions say.* In any case, I think I have it decoding now but now I
have to figure out how to get audio from my Mac to the K3.
Am I right in thinking that the audio TO the K3 should go through USB as
well?
Any other tricks I
Good Afternoon,
Since my antenna is in much worse shape due to storm damage I am
torn between running the net at low power or not at all. With the
weather forecast to warm up in a few days I should be able to dig the
guy-lines out of the six inches of ice they are frozen within currently.
Looking for KTS1 bracket. Ted. Contact me off line.Wp4cw at aol dot com
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Wanted-K1-kTS1-bracket-tp7612233.html
Sent from the Elecraft mailing list archive at Nabble.com.
29 matches
Mail list logo