Really. The TXMON on SVGA?
Sent from my iPhone
...nr4c. bill
> On Aug 8, 2016, at 6:18 PM, lmarion wrote:
>
> Yes there is cake. Install the SVGA option. It displays on my 27 inch
> display beautifully.
>
> Leroy AB7CE
>
> -Original Message- From: David F. Reed
>
I seem to remember a 2 meter mobile that got recalled and shredded per
FCC direction not long before the company closed down.
Dick, n0ce
Ohm sweet Ohm
On 8/8/2016 2:47 PM, Dauer, Edward wrote:
I remembered Heathkit as having first been an airframe manufacturer which got
into electronics
Video has been removed because there is no more problem.
Elecraft is taking care of tuner under the warranty.
73,
Steve
KI4EZL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I asked for help with my K3 to computer connection on this reflector,
and then asked for a used set of KIO3 boards. John, KH7T, was nice
enough to send me his old set of KIO3 boards for free. I replaced my
boards, and, while I was at it, looked at the original set for fried
chokes (they
Me too!!! For sure!!!
__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389
On 8/8/2016 4:22 PM, Ronnie Hull wrote:
> I too would like to see this!
>
> Ronnie W5SUM
>
> Sent from my iPhone
>
>> On Aug 8, 2016, at 4:06 PM, David F. Reed wrote:
>>
>> I
Dang... tough crowd...
Thought we were supposed to be "helpful" here.
Perhaps you (or one of the other guys) could have explained greylisting
and other options rather than getting all crotchety...
I'm out...
TO THE OP:
IF you see this, feel free to email me directly. I will discuss your
I have a small 2 meter amp (RFC 2-23) that has a 5 watt max input rating. Is
there a way to lower the K3 output from the normal 10 watts down to just 5
watts out? Thanks 73 ..mike AI6II
--
View this message in context:
Leroy,
I suspect you misread my post; my P3 with SVGA & TX monitor options
displays the receive spectrum just fine; it does not display the TX
Monitor info on either RX or TX. According to Elecraft it doesn't do
that, and they didn't disclose if they have plans to do that.
If somehow you
Howdy Gang:
Want to try out my iPad and KX3 on PSK/RTTY/CW using a Piglet.
Does anyone have one for sale?
Many thanks.
73, Joe W2KJ
I QRP, therefore I am
__
Elecraft mailing list
Home:
Yes there is cake. Install the SVGA option. It displays on my 27 inch
display beautifully.
Leroy AB7CE
-Original Message-
From: David F. Reed
Sent: Monday, August 08, 2016 3:06 PM
To: elecraft Reflector
Subject: [Elecraft] P3 tx Monitor on VGA?
I suspect this has been asked
We're at 17 postings today on the OT Heathkit topic - exceeding the normal OT
limit.
In the interest of relieving email overload for the majority of our readers, the
thread is now closed.
73,
Eric
Moderator
/elecraft.com/
On 8/8/2016 12:51 PM, Ken G Kopp wrote:
Folks, I'm just the
Hi David,
Not at this time.
73,
Eric
/elecraft.com/
On 8/8/2016 2:06 PM, David F. Reed wrote:
I suspect this has been asked before, but I don't recall the answer...
I note that I really enjoy the TX monitor aspects of my P3; however I miss it
on the external VGA display.
Is there any way
Folks - This way OT topic was closed over 2 hours ago.
Please, no more posts on the email/Spam filtering topic.
73,
Eric
Moderator
/elecraft.com/
On 8/8/2016 2:12 PM, Lynn W. Taylor, WB6UUT wrote:
Speaking as someone who provided E-Mail services for a couple of decades, NO.
It's not the
For Sale one LP-Pan 2 kit, partially built by me (got to the first power-up
test and stopped) SN 1727 for the K3. In original box. $125 shipped CONUS.
Thanks,
Julius
n2wn
-
Julius Fazekas
N2WN
Tennessee Contest Group
http://www.k4ro.net/tcg/index.html
Tennessee QSO Party
Off-list email reduces postings for everyone. :-)
73,
Ed W0YK
On Aug 8, 2016 12:51 PM, Bill wrote:
>
> Personally, I do not like off-list responses - unless they are
> solicited. If responses are made on list, we all get to learn. Off list
> responses do not help the rest
I have for sale one K2 QRP CW rig. 160 through 10. Includes K160X, KNB2,
KAF2, KIO2, KAT2 and KBT2 with a new battery (about 2 months old). Plus
more. I built and used this radio. Specifically it was for 160M CW and
contesting, it excelled. Asking $795 shipped CONUS. Serial #4455 all mods
done.
I too would like to see this!
Ronnie W5SUM
Sent from my iPhone
> On Aug 8, 2016, at 4:06 PM, David F. Reed wrote:
>
> I suspect this has been asked before, but I don't recall the answer...
>
> I note that I really enjoy the TX monitor aspects of my P3; however I miss it
Speaking as someone who provided E-Mail services for a couple of
decades, NO.
It's not the provider's fault.
It's the customer who insists that his E-Mail address appear in a web page.
It's the person who forwards jokes and cc's everyone (not bcc, cc) and
never removes the earlier lists.
I suspect this has been asked before, but I don't recall the answer...
I note that I really enjoy the TX monitor aspects of my P3; however I
miss it on the external VGA display.
Is there any way to set things to get both on the external monitor?
If not currently, is it on a to do list?
Just
Thanks Don.
The antenna that I am using is the UltiMax 100 End Fed antenna with a 33' wire
which all came from the factory as is. It has been a super antenna, worked
lots of state side and DX with it and the MTR 5b radio tuning with the T1. I
just spent a week with it up in the Smokes. It
I don't mind them, but it is getting out of hand. Seriously. I can't wait
till the the election starts.
I think Elecraft needs 2 reflectors. The broad ranging one, and the very
product specific one.
I'm on 15 different reflectors. This one and 1 other are all over the
place. The rest of
Folks, I'm just the messenger ... only wanted to share the info that
Heathkit appears to have returned.
Our bedroom clock (Walmart?) tracks 60 KHz WWVB, choice of times, follows
DST changes, etc. Cost less than $50.
73
K0PP
__
Personally, I do not like off-list responses - unless they are
solicited. If responses are made on list, we all get to learn. Off list
responses do not help the rest of us at all.
Bill W2BLC K-Line
__
Elecraft mailing list
Home:
Steve,
That 33 foot wire may be what is giving you problems. It is a half wave
on 20 meter and present an impedance greater than the T1 can tune.
I quote from the T1 manual:
"Avoid lengths close to a multiple of 1/2-wavelength on any band you plan to
use. If you use an end-fed wire with no
I remembered Heathkit as having first been an airframe manufacturer which got
into electronics after the War. I just checked the history, one version of
which can be found here: http://www.heathkit.nu/heathkit_nu_HeathStory.html.
Apparently the company was sold to Daystrom as early as
Ken and All,
But $100? Not much of a bargain. If you want to monitor local plus UTC
they suggest you buy two of them!
Dave W7AQK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I have just installed a new 6K AM filter in my K3s. I configured the filter by
computer, and checked using CONFIG . Band width was 6k Hz, offset 0. When I
turn the band width knob I only get a spread of 5k. Any suggestion would help.
The filter was put in slot 1.
Sent from my iPad
Was OK and fun back in the day but it is all junk now and their product line
looks pathetic.
Leroy AB7CE
-Original Message-
From: Ken G Kopp
Sent: Monday, August 08, 2016 10:03 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] OT: The Heathkit clocks are back!
Likely of interest
I was looking online for mods to the Heath IG-18. It looks as though a
fellow in California has taken on the Heath mantle.
Below are a couple of links, one a mod to the IG-18, the second a more
direct Heath link:
https://shop.heathkit.com/shop/product/thd-improvement-kit-for-ig-18-series-
To clarify, I'm referring to the thread complaining about the anti-spam system
used by the original requester, not his original post, which was OK.
Eric
/elecraft.com/
On 8/8/2016 12:10 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
Folks - Way too OT. Please take this off list.
In general, this
On Mon, 2016-08-08 at 18:53 +, Mark E. Musick wrote:
> It is real.
> Sometime back, I think it was here on the reflector, someone had
> bought their little AM radio kit and said it was a very good kit and
> they enjoyed building it. The assembly manual was up to the expected
> Heathkit
Folks - Way too OT. Please take this off list.
In general, this is something that should have gone to direct email immediately
and not tied up the list with email..
Thread closed.
73,
Eric
Moderator
/elecraft.com/
On 8/8/2016 11:55 AM, Joe Subich, W4TV wrote:
> How could he anticipate
Hi,
I share the feelings of most of the most recent posters. I have no idea who
is behind the new P.O. box in Santa Cruz which according to Wikipedia was
established in October 2015. I wish them luck, crossing my fingers, but not
holding much hope for their success.
Now, to the OT: part.
Thanks Don.
In the video I posted on youtube, the blinking yellow is actually the self test
sending code for each value.
The green light was blinking when in first step of tune mode, then touch paddle
to start 2nd step of tune mode. Normally it moves around trying different
tunings and
> How could he anticipate that YOU personally would respond... :-)
That's not the point. When you post a general request for help (e.g.,
to a mail list), don't be blocking replies *or* expect someone trying
to help you to go take *extra steps* to respond to an e-mail challenge.
If I get one
On Mon, 2016-08-08 at 13:34 -0400, Marc Veeneman via Elecraft wrote:
> But greylist is more effective and less like a slap in the face to
> your friends. He, and others making the same blunder, should seek
> alternatives.
Greylist is wonderful and works really, really well...
--
73's, and
It is real.
Sometime back, I think it was here on the reflector, someone had bought
their little AM radio kit and said it was a very good kit and they enjoyed
building it.
The assembly manual was up to the expected Heathkit quality.
Mark, WB9CIF
-Original Message-
From: Elecraft
Lazarus loop; I love it.
Dick, n0ce
On 8/8/2016 1:12 PM, John Pitz wrote:
Unfortunately Heathkit seems to be stuck in some sort ofLazarus loop.
--
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
And it will not replace my two GC1000, "Most Accurate Clock", Heathkit's.
73,
Bob
K2TK
On 8/8/2016 1:11 PM, David Gilbert wrote:
Hardly.
$100 for a clock? $150 for a tuned RF AM receiver? Those prices are high by
an order of magnitude, and that's being generous.
On 8/8/2016 9:03
I posted the same question a few days ago for an EC2 clone that I built.
Most suggested I have an Elecraft panel scanned to order custom paint.
That sort of flew in the face of building an EC2 clone to save money. I
could have bought one for what it cost to order custom paint and apply it.
Unfortunately Heathkit seems to be stuck in some sort of Lazarus loop.
I just hope that a Chinese company isn't using such a venerable name to
give credibility to sell more poorly made electronic goods.
On Mon, 2016-08-08 at 10:59 -0700, EricJ wrote:
> Given that we've heard "Heathkit has
Given that we've heard "Heathkit has risen" [BentonHarbor 28:6] monthly
for the last 40 years, I'd want to hear from someone who actually
ordered and received something before I sent any money. I''m not
implying anything dishonest at all, but vaporware is vaporware.
In the mean time, I wish
Steve,
The blinking yellow LED as well as the Self Test results seem to
indicate that the T1 is in BYPASS mode. Tap the BYP/INFO button to
alternate between ATU inline (green LED on).
73,
Don W3FPR
On 8/8/2016 12:44 PM, Steve-KI4EZL wrote:
Hello,
My T1 tuner quit working. It is about 5
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
But greylist is more effective and less like a slap in the face to your
friends. He, and others making the same blunder, should seek alternatives.
--
Marc W8SDG
> On Aug 8, 2016, at 1:14 PM, Clay Autery wrote:
>
> Not my preference either, but sometimes, if your email
Ken:
My GC-1005 that I built as a teenager in 1973 as my first Heathkit experience
is still serving as my bedside clock having served continuously for over 43
years. That said, I could use another clock or two for other applications.
Looks like a fun kit to build!
While the pricing as a
Not my preference either, but sometimes, if your email provider makes a
mistake or doesn't take proper precautions, you can end up getting
THOUSANDS of SPAM emails a day...
Been there...
Give the guy a break, please.
73,
__
Clay Autery, KY5G
MONTAC Enterprises
(318)
Hardly.
$100 for a clock? $150 for a tuned RF AM receiver? Those prices are
high by an order of magnitude, and that's being generous.
On 8/8/2016 9:03 AM, Ken G Kopp wrote:
Likely of interest to many of us.
www.heathkit.com
He ain't picking on you He's obviously got a serious problem with
SPAM and has implemented this server initiated process.
The message is sent to EVERYONE who sends an email to that address who
is NOT on the "WHITELIST".
Once you are on the Whitelist, you won't get the message anymore.
How
I've had 8 Eneloop Pro 2400 mAh cells in my KX3 for about 3 years now.
There have probably been only about 30 charge/discharge cycles on them,
since I most often use an external LiFePO4 pack when I can.
Just recently I've begun to experience KX3 shutdown when trying to transmit
at 5 watts or more
Ken and Don,
I think you got this response because you responded direct to the sender
rather than to the Elecraft reflector. Or perhaps you copied his direct
email on a response to the reflector.
I also use a required response spam filter system that catches most
automated junk, but it only
Hello,
My T1 tuner quit working. It is about 5 weeks old.
I have video taped the attempt to tune and the self test, and posted it on
YouTube. I hope this will help with the diagnosis. Here is that link
- https://youtu.be/jprcv6q_HFQ
Station is a 33' EF wire antenna, t1 tuner, LNR
Frank,
I think you will be happier using the soundcard route.
The KX3 Utility will PSK-D, FSK-D or CW.
If you already have the capability to download firmware to the
KX3/KXPA100 or to save the configuration, etc using KX3 Utility, you are
all set - just go to the Terminal tab, then tune the
Because I can't seem to figure out how to search the list to find an answer
to my question, I am posting this question.
How does one configure (cable) a KX3, KXPA100 and a computer to use the
Elecraft KX3 Utility software for data modes?
Or, must I have to go the sound card route and use a
Likely of interest to many of us.
www.heathkit.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
I was going to respond, but based on the experience below, I will decline.
IMHO, this is a horrid way to operate email.
73,
Don W3FPR
On 8/8/2016 11:40 AM, Ken G Kopp wrote:
Why did you ask a question if you were going to block / refuse replies? ? ?
!
K0PP
On Aug 8, 2016 9:30 AM,
Why did you ask a question if you were going to block / refuse replies? ? ?
!
K0PP
On Aug 8, 2016 9:30 AM, wrote:
> I apologize for this automatic reply to your email.
>
> To control spam, I now allow incoming messages only from senders I have
> approved beforehand.
>
> If
How stiff is the 20 meter vertical? I take an 8 inch long piece of 1.5in
pvc and make a stand off at the base and the top for the vertical. Then run
a wire from the 20 meter feed point to the top of the 20 meter vertical
giving you 17feet...then out another 17 feet and you will have an inverted
L.
All
I have an EC-2 that is getting ready to be built into a power-supply, speaker
et. for my K2. When the holes for the meters, speakers, switches, etc. are
milled out in the front and back panels, there will undoubtedly be areas where
the paint is removed that needs to be touched up. Where
I have used egg cartons and ice cube trays as well as muffin
pans and glass bowls. I usually can reach a finger into both the
egg cartons and ice cube trays to slide a small part up the side
without using tweezers.
73 Bill AE6JV
On 8/5/16 at 8:03 PM, donw...@embarqmail.com (Don Wilhelm)
Hi Edward
I am buying into this thread somewhat late. However, I did not see a
particular suggestion which has previously caused me similar problems.
Have you, inadvertently or otherwise, changed the "radio" setting in the
KPA500 menu? It should be set as K3. If it isn't, you will get some
61 matches
Mail list logo