[Elecraft] K3 SSB LO/HI Cut not selectable?

Hi, Just noticed a problem with my K3, FW Revs 05.54 I can no longer select LO HI cut (vs. shift/width) in LSB/USB mode. I understand this is a known side effect of changing the passband shift (PB CTRL) from its default .05 to .01. I can change PB CTRL to either .05 or .01 in CW mode but NOT in

[Elecraft] KX1 alignment and testing guidance

Hi folks. I'm in the final steps for getting my KX1 working and am kind of stuck. Since Elecraft is closed until Wednesday I thought I'd check with y'all for a few ideas before then. Q1). What exactly is TUNE mode supposed to do? For me it doesn't appear to do anything. BTW, I'm trying to

Re: [Elecraft] Fwd: Re: I'm looking for terminal program for the K3

Thank you That's nice but a bit more than I'm looking for. Original message From: tomb18 Date: 2016-12-26 12:06 AM (GMT-05:00) To: elecraft Subject: [Elecraft] Fwd: Re: I'm looking for terminal program for the K3 Sent

Re: [Elecraft] HEIL PROSET 7 AND K2

Paul, There are two models of that microphone - so like all Heil mics, one must be specific about the exact model (and that makes the answer NOT quick). If you have the Pro7iC model, there is no doubt in my mind that it will work if you plug the microphone configuration header with the 5.6k

[Elecraft] Fwd: Re: I'm looking for terminal program for the K3

Sent from my Samsung Galaxy smartphone. Original message From: tomb18 Date: 2016-12-26 12:05 AM (GMT-05:00) To: Harry Yingst Subject: Re: [Elecraft] I'm looking for terminal program for the K3 HiIt's not stand alone but Win4k3 is

[Elecraft] I'm looking for terminal program for the K3

I was playing with the terminal program in the K3 utility and ws curious if there was a stand alone Terminal program similar to the one in the K3 utility available. Thank you  __ Elecraft mailing list Home:

[Elecraft] HEIL PROSET 7 AND K2

A QUICK QUESTION .. I have a Heil Proset 7 that will work with my K3s (delivery pending) But leave for a 3 week trip to Hawaii and intend on taking the K2 as I might need a few more watts for the trip than the KX3 has. Yes, I have a KXPA100, but it is logistics.. Has anyone used the Proset 7

Re: [Elecraft] Connecting PC to W1 - corrected text

Our KXUSB and KXSER should be fine with the W1. Merry Xmas! 73 de Dick, K6KR > On Dec 25, 2016, at 16:40, Dauer, Edward wrote: > > Previous post was garbled by an error in a text editor. Corrected text > follows: > > > Elecraft sells a serial cable as an option for

Re: [Elecraft] Connecting PC to W1 - corrected text

Previous post was garbled by an error in a text editor. Corrected text follows: Elecraft sells a serial cable as an option for the W1 wattmeter, to allow communication between the W1 and a PC. What I cannot determine by looking through the site is whether that cable is all I would need to

[Elecraft] Connecting PC to W1

Elecraft sells a serial cable as an option for the W1 wattmeter, to allow communication between the W1 and a PC. What I cannot determine by looking through the site is whether that cable is all I would need to connect my W1 to a PC that has USB ports, but no DB9 or DB15. One photograph from

Re: [Elecraft] Elecraft Customer Service

Oops, You said xyz Sent from my Samsung Galaxy smartphone. Original message From: tomb18 Date: 2016-12-25 6:53 PM (GMT-05:00) To: James Bennett , Elecraft Reflector Reflector Subject: Re: [Elecraft] Elecraft

Re: [Elecraft] Elecraft Customer Service

HiMine too knows what I want when I talk about the xyl stuff.73 Sent from my Samsung Galaxy smartphone. Original message From: James Bennett Date: 2016-12-25 3:33 PM (GMT-05:00) To: Elecraft Reflector Reflector Subject: Re:

Re: [Elecraft] FS: Elecraft KPA500 Solid State Amplifier SOLD

SOLD On 12/22/2016 1:38 PM, 'DGB' wrote: Elecraft KPA500 Amp - Bought new as a kit 8/01/2012 s/n 0971- assembled by myself. Includes KPAK3AUX-KPA to K3 Aux Cable and PWR-US240 US 240V Power Cord. Latest firmware installed, cosmetically good, operates full output. No issues - includes

Re: [Elecraft] Elecraft Customer Service

I found one about 17 years ago - she bought me a KX3 couple years back! I guess it helps that she got her ham ticket (General class, with CW) shortly after she moved here from the Philippines! While she isn’t too super happy with all my radio purchases over the years, at least she knows what

Re: [Elecraft] Elecraft Customer Service

The more significant question where can one find a lovely wife nice enough to order a K-Pod for Christmas? :-) Merry Christmas, Jim K8MR > On Dec 25, 2016, at 10:41 AM, Bill Mader wrote: > > Merry Christmas to All! > > I just opened a Christmas gift from my

[Elecraft] Mobile K3s/P3 RX only?

I'm trying to put together an RFI hunting package with my SDRPlay and HDSDR running on a tablet. The software runs fine but is a bit clunky on a tablet. The biggest problem is holding the tablet with the SDR velcro'd to the back remains too close to the DF antenna resulting in pickup. I've got a

Re: [Elecraft] Elecraft Customer Service

Bill Mader writes: She received a call from Elecraft Customer Support pointing out we had both ordered the same item and if they should ship both. She explained "no" and thus my backorder. Where else could you find such great customer support along with such fine products? We all know the

[Elecraft] Elecraft CW Net hiatus

Merry Christmas to you all! There will be no ECN/20 or ECN/40 today. Please enjoy your family and friends on this holy holiday. Until next week stay safe and well, 73, Kevin. KD5ONS Net Control Operator 5th Class.

Re: [Elecraft] Elecraft Customer Service

Jeff … I understand your reaction, but don’t think this one is due to anything at Elecraft.If you have a “My UPS” type of account with UPS, then you will receive that kind of email from UPS automatically no matter who initiates the shipment. I’ve also been surprised and mystified on

Re: [Elecraft] Elecraft Customer Service

I'm glad this went better for you Bill. I gave my wife a Christmas list with several items on it. One item was a add-on board for my P3. She explained when ordering it from Elecraft that it was a gift, and was assured that it would be treated as such. A day before we got to our home up north where

Re: [Elecraft] Elecraft Customer Service

Bill, You are right Elecraft gets it right once again! 73 Doug EI2CN -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill Mader Sent: 25 December 2016 15:42 To: elecraft@mailman.qth.net Subject: [Elecraft] Elecraft Customer

[Elecraft] Elecraft Customer Service

Merry Christmas to All! I just opened a Christmas gift from my lovely wife Judy to find a K-Pod inside. This was quite a surprise since I had forgotten I suggested I wanted one. I also ordered one as part of a larger order and noted it was "backordered" just after she place her order. She

Re: [Elecraft] K3 and WSJT-X 1.7

This one change of "Mode=None" solved my K3/Microham MK II issue. I now have WSJT-X v.1.7 working perfectly. Thank you!!! Lee, KY7M -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-and-WSJT-X-1-7-tp7624923p7624955.html Sent from the Elecraft mailing list archive at

Re: [Elecraft] Subject: Re: IMD and CW

Falling supply voltage has a significant effect up the K3's SSB signal! During a past FD, the CW Team Captain stopped the SSB station to ask what we had changed. He was then receiving a lot of "splatter" on 20 CW while we operated on 20 SSB. It turned out someone had accidentally knocked the