Al, Dan & Rich,
Thanks guys, that indeed is the cause of
the problem. I have an old hand injury
that makes using the little finger on the
left hand a challenge in the typing
position. I started N1MM+, put the K3s in
diversity and tapped the key and that
dis-engaged it. Problem found so
Yes there is one around, I think Wayne sent one out some time back,
Better question is, how about making 630m a transverter band and
all the settings and switching done automatically as you select 630M.
Plenty hams using K3 on 630M, asking for an update please for all..
Merv K9FD
Wondering
Wondering if anyone has already assembled a macro for the K3 to place the
K3 into KXV3B "Test" mode and whatever other settings required to switch
the K3 for operation at 630 meterssand back again to "Normal" mode?
Thanks in advance
John, N6AX
Hi Dany. This scared me a little bit too until I figured out what it was
for.
This is not just for expeditions. It's for everyone to use whose rig can
handle it.
Your TX frequency will still be as indicated on the FT8 screen. The
software will raise the audio tone frequency by the same amount
Hi
I would like to know if someone tried to run WSJT-X FT-8 in Split mode, not
Split in the audio band but in real Split by activating the option in the radio
tab of the configuration?
Here, when I activate Split option, K3 change for Split, RX stay on VFO A, TX
change to VFO B but TX
Mike,
Take a look at the Elecraft Mini-Modules. There is a 2 tone generator
kit, the 2T-Gen. It currently has a Holiday Special price.
73,
Don W3FPR
On 12/4/2017 12:09 PM, Michael Walker wrote:
Thanks, but I need to use it on other hardware.
>From the N1MM+ documentation (Supported Radios page, K3/K3S section):
. The stereo (grave accent - ` key, at the left end of the number keys row
on many keyboards) toggles Sub on and off. It is identical to pressing the
SUB radio button. To leave SUB on all the time, select Config > Sub
Receiver
I am willing to bet that while trying to hit the ESC key in N1MM+, you
accidentally or also hit the ~ key immediately below the escape key.
That will cause the symptom you described.
73,
Dan
__
Elecraft mailing list
Home:
I have successfully used a soundcard output. I used Audacity to create
files with the correct two tone signals. Search for instructions to
generate multitone signals.
73,
Mark
W7MLGj
On Dec 4, 2017 11:11 AM, "Michael Walker" wrote:
> Thanks, but I need to use it on other
Thanks, but I need to use it on other hardware.
Mike
On Mon, Dec 4, 2017 at 11:47 AM, Nr4c wrote:
> There is one built in to every K3, K3S, KX3 and prob KX2.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Dec 4, 2017, at 11:35 AM, Michael Walker
>
There is one built in to every K3, K3S, KX3 and prob KX2.
Sent from my iPhone
...nr4c. bill
> On Dec 4, 2017, at 11:35 AM, Michael Walker wrote:
>
> Hi All
>
> Before I order a new one, does anyone have one they wish to part with?
>
> Mike va3mw
>
Hi All
Before I order a new one, does anyone have one they wish to part with?
Mike va3mw
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Udo,
Are you using the POWER switch to turn the K3 off?
If you turn off the power supply instead, the K3 will not save any
recent menu changes nor the current band/mode/frequency.
73,
Don W3FPR
On 12/4/2017 11:11 AM, Udo Langenohl - DK5YA wrote:
I pimped both of my K3 with the new KIO3B
The K3s does this to avoid the extraneous keying due to activity on the USB
serial port while the computer is booting up. You can put the K3s into
USB.SAFE mode like this:
"Safe" mode disables PTT or keying transmissions until the K3S receives a
command via the USB interface, such as a read of
I pimped both of my K3 with the new KIO3B boards in order to avoid that
nasty sound card cabeling etc. It works fine via USB but one strange
thing happens with both radios.
I have to set "PTT-KEY" to RTS-DTR every time after powering down and
power up the radio again. Both K3 forget the
15 matches
Mail list logo