[Elecraft] Conditions, shmonditions: DXing anyway

2018-09-20 Thread Wayne Burdick
Tonight I heard a very weak CW CQ on 7.007 MHz right around sundown -- LA1MFA (Norway). With the filtering on the K3S dialed down to 100 Hz, 30 Hz audio peaking filter (APF) turned on, and the noise blanker optimized, he was readable. I called and he came right back to me. I would normally

[Elecraft] [K3] Feature request - based on the KX2

2018-09-20 Thread John W2XS
The KX2 now allows 4 separate programmable functions when the "PFn" key is pressed. That would be a nice feature on the K3 for the PF1 and PF2 buttons. There are many times now when I disconnect the USB cable from the rig as I have found a large (10 to 20 dB) increase in noise floor on some bands

[Elecraft] Subject: Re: KPA1500 - Static IPv4 address

2018-09-20 Thread Dave B via Elecraft
A better way, perhaps... Leave DHCP enabled in the PA and any other equipment, but make a written note of the PA's LAN port MAC address.  (And that of any other LAN connected device you have.) In your router (or other DHCP providing gadget) look in it's setup for "address reservation" or similar

Re: [Elecraft] loss of RX sensivity

2018-09-20 Thread Pentti A J Pajunen
Hi all! I'm a member of some similar lists. Every time somebody asks for help of some issue, the biggest count of "advices" distrace far away of the original subject. Are U sure that zillions of ways how to tighten A certain connector or wisdoms alike, are any real kinda solution.  Seems that

[Elecraft] KPA1500 - Static IPv4 address

2018-09-20 Thread Burl Borcherding
> Thanks for all the info. I have the amp setup for static IPv4 address and > port forwarding on the router with udp/tcp applied > I can connect locally and everything works like it should. > However, when I " Connect Remote” I get the screen with the green bar on the > bottom, the buttons at