Hi Bob - Have you run the K3 TX gain calibration on each band into a dummy load
(or very low SWR Ant.) ? If that is out of cal, it could easily create
symptoms like this.
73,
Eric
/elecraft.com/
On 10/22/2018 2:02 PM, n7wy via Elecraft wrote:
Turns out, it is not the KPA1500 not
skype is basically half duplex with vox. any thing that happens locally
that triggers the vox will cause receive cut outs.
the cure is to mute the mike whenever you're done talking. treat the mute
button like PTT and you'll have better luck.
jim ab3cv
On Wed, Oct 24, 2018 at 7:51 PM wrote:
>
It sure does sound like a Skype issue.
At work we use Skype and Cisco Webex for remote video display of meetings. In
either app if you touch any button on the hardware or software IP phones, even
to mute them, the software will mute the presentation.
Is the K3s set to beep on button presses?
HiOne thing I just thought of is that perhaps Skype is muting the sound when
you hit a key. Try to set the mic input on mute and see what happens.73 Tom
Sent from my Samsung Galaxy smartphone.
Original message From: KE8G Date:
2018-10-24 4:43 PM (GMT-05:00) To: Elecraft
Hi All,
I apologize in advance, as this is going to be a long post. I will try to
include all the relevant information, so not many questions are left
unanswered.
I recently bought a K3s and got rid of my K3 rigs. The K3s is located at
my Ohio QTH (remote radio) and hooked up properly to the
Elecrafters, thanks for the input.
--
Ohne CW ist es nur CB..
73, Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On 10/24/2018 11:51 AM, Joe Subich, W4TV wrote:
"Sharp and narrow" generally means too much high frequency (1600 - 3200
HZ) audio and not enough mid range (400 - 800 HZ) audio.
Or that the other station is confusing ham radio with broadcasting. Some
hams want to hear full bass -- that's fine
> saying the audio is sharp and narrow .
"Sharp and narrow" generally means too much high frequency (1600 - 3200
HZ) audio and not enough mid range (400 - 800 HZ) audio.
With my CM-500 I use the following two sets of TX EQ:
Normal operation "DX"/Contest Operation
50
I've gotten good reports with the following:
Mic Gain 25
compression 10
I set rear panel bias on for the electret element.
My TX EQ is
0.05 -9
0.10 -6
0.20 0
0.40 +2
0.80 +4
1.60 +5
2.40 +2
3.20 -3
I use the same EQ settings for both the CM500 and for the MC-60
connected to the front
We were indeed.
Wayne
N6KR
> On Oct 24, 2018, at 10:04 AM, Paul Van Dyke wrote:
>
> Errr There is a rare chance that they were slammed...
>
> KB9AVO
>
>
> On 10/24/18, William Shanney wrote:
>> I ordered mine on the pre-order day and have heard nothing.
>>
>>
>> Bill, W6QR
>>
Errr There is a rare chance that they were slammed...
KB9AVO
On 10/24/18, William Shanney wrote:
> I ordered mine on the pre-order day and have heard nothing.
>
>
> Bill, W6QR
> wshan...@verizon.net
>
> __
> Elecraft mailing list
>
I ordered mine on the pre-order day and have heard nothing.
Bill, W6QR
wshan...@verizon.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Mic select rpl bias
Mic gain 17
Cmp 17
Good place to start.
Sent from my iPhone
...nr4c. bill
> On Oct 24, 2018, at 10:31 AM, Martin wrote:
>
> Elecrafters,
> i'm preparing the clubstation for the CQ WW Contest. I get Audio-reports
> saying the audio is sharp and narrow . I would like to
This article is for the KX3, but the TX EQ settings are from K3 users. I don’t
know if the DVR trick works on the K3, but it is worth trying.
https://observer.wunderwood.org/2015/09/09/transmit-audio-and-compression-with-the-elecraft-kx3/
wunder
Walter Underwood
wun...@wunderwood.org
Elecrafters,
i'm preparing the clubstation for the CQ WW Contest. I get Audio-reports
saying the audio is sharp and narrow . I would like to set the K3 for a
good and readable audio. Would the Yamaha CM 500 users share their
settings? Thanks.
--
Ohne CW ist es nur CB..
73, Martin DM4iM
15 matches
Mail list logo
