In particular, since the KX1 doesn't do SSB, seems like you would have
much better luck checking into one of the CW nets. See the CW Net
announcement elsewhere on this list.
73,
-- Dave, N8SBE
On 2023-04-09 21:59, kx8xx wrote:
reads like me trying to check in with a KX1 would be silly
I changed the Subject line since this is a new topic.
If the wattmeter (in this case the P3 sensor) is placed after the tuner
then it will read the SWR of the antenna. To determine the net forward
power, just subtract the reflected power from the forward power.
To calculate reflected power,
My question would be "where is the sensor for the P3 located in the feed
system?" It should be between the KPA500 output and the KAT500 input.
Therefore, when the KAT500 resolves a match, then the line between the
KPA500 output and KAT500 input is nominally 50 ohms.
If the sensor is
As a first step for both of you, I would do a TX Gain calibration and see if it
fails for the 15 meter band.
That may also fix your problem.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Saul Broudy via Elecraft
Sent: Monday, April 10, 2023
My K3s has been working wonderfully since bought new in 2015. I use it
for CW only and run it at 75 - 85 watts. It has a new problem on 15 meters
only. After a short period of transmission the power will disappear. Turning
the power off and on restores full functions for another
There is a well-written and illustrated overview I found useful when building
mine located here:
https://ac2c.net/KX1-Project.php
73 Scott ka9p
Make something good happen!
> On Apr 10, 2023, at 1:51 AM, Julia Tuttle wrote:
>
> If you mean the original manuals, they're here:
>
>
If you mean the original manuals, they're here:
https://elecraft.com/pages/kx1-manuals
I don't know of any other KX1-specific resources, but someone else might.
Also, you may want to get your email setup checked out; your outgoing
message consistently had no punctuation or spaces between
7 matches
Mail list logo
