I have searched the manual etc. and cant find a way of setting the band edges.
By which I mean the frequencies outside of which the transmitter will not
function. Here in Europe (as elsewhere I believe) different countries have
different band edges - this is particularly so for the 5MHz band.
my PC running
Logger32 and in all cases it changes from RX to TX to RX as expected.
Feel free to let me know if I've misunderstood your query. Quite happy
to conduct further tests.
Regards,
Mike VP8NO
On 24/02/2018 18:52, ANDY NEHAN via Elecraft wrote:
> I use HRD to control my rig on data mode
I use HRD to control my rig on data modes and it does a good
job and works as expected. However, if the K3 display is set to show the
REF*CAL situation then after transmitting the rig stays in transmit mode, as
shown by the
red TX button being lit. I have not noticed this when the K3 display
I have a P3 with latest revision of firmware and an SVGA
card and a station monitor and a USB keyboard plugged in as well.
The frequency readout on the P3 and external monitor is
correct under all common operating situation when I have a “span” of, say
100KHz. However, when I use the command
I have searched the archive and I cant find what my memory tells me I saw! I
recall someone with a close neighbour operator having photos on the impact of
the other operator and themselves before and after the synthesizer upgrade. I
would very much like to have copies of those photos for a talk
5 matches
Mail list logo