Why wouldn't Elecraft design the KPA500 to be driven to its rated output by a
K3/10 ?
Bill K3UJ
-Original Message-
From: Don Wilhelm w3...@embarqmail.com
Subject: Re: [Elecraft] 100 Watts or 500 Watts
Frank,
If you think you want 500 watts out, you will have to install the
Sure Fred, bring it on!
I'd be first in line to pick up a copy
73
Bill K3UJ
-Original Message-
From: Cady, Fred fc...@ece.montana.edu
To: elecraft elecraft@mailman.qth.net
Sent: Wed, Dec 8, 2010 8:16 pm
Subject: [Elecraft] [K3] Is this the kind of documentation you would like
What has me biting my fingernails is the value of Elecraft as a company. How
long can the two guys resist the inevitable buy out offers? THAT is the
question !!
-Original Message-
From: Wayne Burdick n...@elecraft.com
To: Lee Buller k...@swbell.net
Cc: Elecraft Reflector
The Sounds Sweet comm speaker isn't a monitor per se but does a good job for me
when compared to the built in speakers I've used. Its big, about a cubic foot,
but plays plenty loud and clean, albeit somewhat mellow. About $180 delivered
30 day satisfaction guarantee.
I for one would really like to see a panadaptor for the K2. In an EC2 sized
enclosure.
Any others interested?
Bill K2UJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
In a message dated 6/17/2006 10:34:28 P.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Looks like the big (35A etc.) Astrons are
in favor.
In lieu of a small switching P/S I am using the somewhat heavy but dead
quiet Astron RS-7A that is as quiet as a battery on my K2. I picked
Ron, care to retell that Cut the end offstory for those of us who might
have missed it the first time?
K3UJ
===
73 de Jim, N2EY
1) The earlier KWM-1 was similar, but lacked 80 and 40, and wasn't nearly so
popular.
2) I am reminded of the 'cut the end off
Eric...all these suggestions and ideas for future product! Goes to show a
lot of us are ready for more more more. Is there any chance we might soon
(ever) see an all out transceiver designed expressly for the contester/dx'er
to go
along with the new amps? I know you wouldn't want to be
In a message dated 4/7/2006 11:57:35 A.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
http://www.wa3wsj.com/SkunkWorks.html
Okay I found it. Funny thing, I didn't mind getting spammed that time.
/Bill K3UJ
___
Elecraft mailing list
Phil,
Check the companion guide on their web site. A menu setting also needs to
be changed. (extended vfo)
Bill K3UJ
Maybe some one can help. I am building K-2 # 5423 with the rework
eliminators.
I got the unmdules and missing parts but the instructions were not good for
In a message dated 3/17/2006 1:18:00 P.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
With RF gain off completely and AF gain fully
advanced, there is a fair amount of hiss.
Howard and all,
To throw my observation into the mix, with AF gain full clockwise and RF
full ccw, I hear
For those who haven't discovered the K9YA Telegraph e-Zine yet, you are
missing what a lot of us consider a treasure.
http://www.k9ya.org
73, Bill, K3UJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Good idea. Would someone with the talent and means to do so care to set up
such a site?? It wouldn't necessarily have to be part of the Elecraft site.
And it could include all Elecraft rigs, not just K2
Bill K3UJ
K2 #3810
Wonder if Elecraft has considered a rig Registry page on
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I'm preparing to order a Hakko 808 desoldering tool and am wondering if I
will also need to obtain a variety of additional nozzles to accomplish the
usual day to day tasks, or does the supplied tip leave little to be desired?
How
frequently do nozzles need to be replaced?
Thanks. Bill,
Julius,
Would you (or anyone) please elaborate on the use of an Rx antenna?
Thanks
Bill K3UJ
This was the first time I used the Rx Antenna feature
and it was invaluable.
Thanks to everyone for a great 'test!
73,
Julius
n2wn
K2/100 #3311
FWK2MCIO K2 MCU F/W Upgrade to 2.04; K2 IOC Upgrade to 1.09
(IOC Req'd for this upgr.)
$44.00
In regard to the above firmware upgrade offering for the K2, what is meant
by IOC?
Bill K3UJ
___
Don,
What threw me was the advisement that (IOC Req'd for this upgr.)
Wouldn't IOC be a part of EVERY functioning K2? I don't see why they saw fit
to include that requirement for the upgrade.
Bill
Bill,
The IOC chip is located in its socket near the center of the K2 RF Board.
It is
I'm looking for a small commercially available power supply suitable for a
K2. Any ideas? I remember one similar to a lap top supply being recommended a
while back, but don't remember who was selling them.
Thanks
Bill
K3UJ
P/S for basic K2
In a message dated 10/6/2005 6:28:59 P.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
The K2’s VCO (voltage-controlled oscillator) may be susceptible to
low-frequency modulation by very large power transformers
Will future K2 kits incorporate the mag shielding mod?
Bill K3UJ
In a message dated 10/3/2005 12:54:17 P.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
I need to add an indicator to my K2 when running split. A couple of times I
thought I was split when I wasn't. Had egg on my face when I called on top
of the DX station. That's embarrassing.
N2TK,
[EMAIL PROTECTED] writes:
Have relocated left vise behind. Looking for a good source for
circuit board vise...i.e., 3rd hand. Suggestions?
Seen this one?
_http://qrp.ke9v.net/articles/fivebucks.html_
(http://qrp.ke9v.net/articles/fivebucks.html)
73
Bill K3UJ
In a message dated 9/10/2005 11:25:53 A.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
K2 has ONLY 80dB of third order dynamic range vs SDR-1000 98dB
So...??
Do you have some sound files that show what kind of difference that makes,
and under what conditions?
So many people base
Jay, W6CJ wrote:
Going over the KX-1 manual, it calls for aligning first the BFO and then the
DDS by dialing in a strong carrier (WWV, etc) and then using the BFO or DDS
menus. Can someone suggest some alternate alignment methods? I have a
calibrated freq counter and service monitor.
Hmmm. The headphone jack in K2 4152 is intermittent also. I'm holding my
breath every time I unplug. Seems to be a problematic component, at least some
of them are. Maybe there was a bad batch?
Elecraft, is there a more reliable replacement?
Bill K3UJ
If anyone has a Palomar Engineers M-840 surplus to their needs, please
contact me off list.
Thanks.
Bill K3UJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change,
With the possible eminent presentation of a VERY QRO amplifier to the
Elecraft family, there is certain to be a number of us, with only QRP
experience,
jumping in and playing with gobs of RF energy for the very first time. Let's
hear it from those with experience, some do's, don'ts and
A while back there was a discussion on resistor color coding,
Ran across this link. A freeware program, it's kind of neat. Win XP
would not run it but it ran on my Win 98 machine.
Check it out at:
www.schematica.com
Tony W7GO
It worked FB under XP
Anything over $1500/US and I'm afraid I will have to count myself out.
Wonder what others think?
Bill K3UJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
In a message dated 4/6/2005 10:31:27 A.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
This is the sort of thing that worries me about working CW. I am all in
favor of practicing before going on the air but what is available out there
to do this? Is there a hardware device software
The book has been claimed.
Thanks all...
Bill K3UJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
How would one calculate the amplifier gain (in dB) required to go from one
power level to another? For example from 5W to 100W.
K3UJ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
I'd hoped that the responses would be far more interesting than merely
looking up the answer, and I was NOT disappointed. Thanks, all!
Bill K3UJ
-Original Message-
How would one calculate the amplifier gain (in dB) required
There are those who advocate no fillet when soldering plated thru holes. Is
an obvious fillet in that instance a sign of too much solder?
K3UJ
===
Never trim precut to length leads such as ICs and relays, and resistor
packs, or crystals.
These have
That can't be right. Drawing it (roughly) on paper shows it to be around 13
feet wide, give or take a foot or so. But coming up with a precise equation
takes more math skills than high school left me with...
Bill K3UJ
In a message dated
What features does Ultimatic Keying have? And what keyers offer it?
73,
Tom N0SS
=
This from an OHR ad:
Ultimatic is a pre-iambic keying mode in which the result of a squeeze is
that the keyer will switch to the last lever pressed rather than alternating
dits and
In a message dated 12/25/2004 12:43:31 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
Hi Bob,
That's a good idea IMHO. A full sized K2 for those who don't need small
size. Give more importance to having room for fingers to twist knobs
without hitting the ones close by and etc.
I know what you mean Dave. I have wrap my feedline around the pot belly
stove to keep it from happening.
Bill K3UJ
=
Does anyone know of a good way to remove frozen RF from an antenna? It
is now so thick on my wire that the new RF can no longer get through.
Let me clarify. The speaker frame can get distorted in shipping while not
installed in the radio. I've never had a repeat problem after correcting
the initial distortion.
To check for a twisted speaker, carefully move the cone in and out by hand.
Just push straight down on it
Is there a kit version of the artificial ground available? Even a
schematic would be nice. I would assume that its just a series tuned L/C with a
meter
to measure RF current somehow, but if anyone has come up with a version of
their own, or knows of a kit, I'd like to hear about it.
I've tried the N4PY windows s/w and like it. But that's the only one tried
so far. Are there others worth considering? Something more designed for the K2
rather than the Pegasus as the case with N4PY. Keyboard cw is a requirement.
Thanks,
Bill K3UJ
Book by Jerry Sevick, W2FMI
Practical designs of baluns/ununs as related to antennas and tuners. Also
includes interesting section on ground systems and short verticals.
$19.95 at Amazon.
My extra copy, new condition, $13 delivered.
Bill K3UJ
When an input to, or output from an audio device is specified as being line
level, what exactly does that mean? Is it a specific RMS voltage perhaps?
Its a term that I've heard bandied about over the years but either never knew,
or have forgotten the precise meaning.
Bill K3UJ
Wonder just how many of us have had the pleasure of using N6KR's design, the
NORCAL Sierra? I picked up one on eBay and find it to be one sweet li'l rig.
I've had it on 40 and 20 with consistently good reports. The rx is a
pleasure to listen to. Definitely a keeper!
I read somewhere that
I've been having considerable success with the resonant feedline dipole
(RFD) antenna as was described in QST a few years back and also in the '04
ARRL
Handbook. Its basically a 1/4 wavelength of antenna wire followed by your coax
feeder into the shack. Where they connect, the coax shield
45 matches
Mail list logo