r departed.
What is that line from the Radio Amateur's Code?
"The Radio Amateur is balanced. Radio is a hobby, never interfering
with duties owed to family, job, school or community."
:=)
Alan N1AL
__
Elecraft mai
argument that the little projects that hams
do build today - for example some Arduino gizmo with a dozen parts - is
of similar complexity to the all-homebrew stations of old.
Alan N1AL
On 01/09/2017 04:29 PM, Kevin wrote:
I don't either. I read every single post in this thread and I didn't
Jim:
And I can tell you from Belize that, while the delivery service is not as
fast (no fault of Elecraft), it is every bit
of the same super-high quality that you are talking about.
Long may we have K-toys to play with!
Happy Holidays to all.
73, Alan V31FA
On Sat, Dec 24, 2016 at 4:09 PM
Apparently you can't. I must have been thinking of the weight adjustment.
Alan N1AL
On 12/23/2016 09:22 PM, Jan Erik Holm wrote:
On 2016-12-23 19:11, Alan Bloom wrote:
You could always compensate for it by adjusting the K3 for softer
key shaping.
Alan N1AL
How do you do that ?
/ 73 Jim
in more key clicks for a given rise/fall time than a raised
sinusoid.
Alan N1AL
On 12/23/2016 01:30 PM, K9MA wrote:
On 12/23/2016 12:11, Alan Bloom wrote:
For a CW signal, the nonlinearity of a typical power amplifier should
have the effect of shortening the rise and fall times. That does
. You could always compensate for it by adjusting the K3 for softer
key shaping.
Alan N1AL
On 12/22/2016 10:22 PM, Vic Rosenthal wrote:
I didn't exactly do this, but I did investigate the effects of distortion on CW
signals. I disconnected my P3 from the K3 and set the IF to 7 MHz. so it would
as a
password to your on-line bank account. :=)
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
posting something for sale. I'm curious why that is? Is there some bad
thing a nefarious person could do if they knew the serial number?
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
H
On 12/07/2016 05:11 PM, Alan Bloom wrote:
I think all you have to do is QSY, switch to tracking mode to center the
display and then switch back to fixed mode.
I should have actually tried it before I opened my big mouth. :=) That
works when sending commands manually but not in a macro
I think all you have to do is QSY, switch to tracking mode to center the
display and then switch back to fixed mode.
Alan N1AL
On 12/07/2016 04:34 PM, Fred Jensen wrote:
I think [but don't fully understand the original question either] that
he is in Fixed Tune mode and wants to stay
I am interested is acquiring an ELECRAFT K2 or possibly K2/100 as an
emergency radio. . Radio should include SSB, internal battery pack option
and Elecraft ATU.
Contact me directly at ardujen...@aol.com
ALAN KB7MBI
BNC cable along with the radio and
tuner/amp and manuals ONLY, no more no less.
PHOTOS:
https://www.dropbox.com/sh/g21svqq5d9s3ay8/AAADSrpXRoRrtvuk3EAbhw8ua?dl=0
73
Alan N3ALN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
eyboard must be able to be recognized by the PC
BIOS. This rules out Bluetooth and multimedia style keyboards,
those with mice, touchpads, and multimedia functions.
I believe that keyboards that work with the PX3 should work with the
P3/SVGA also.
Alan N1AL
On 11/20/2016 09:23 AM, Dauer, Edward w
thing, but the video only gave a peek. All I know is
that it is small, it looks like it has a minimalist matching
thingis and it works.
If Steve or any other good fellow could tell us what it is, I would be
interested. Mine always become more bigger and more complicated.
Cheers,
alan
the KPA100 and KAT100 in EC2 enclosure -- are
at
http://wilcoxengineering.com/kpa100-in-ec2/
In addition to tuning your rig, I can also rescue a building project you might
have started some time ago.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-478-0736 (cell, text)
http://amazon.
.
In the latter case, the feedline is effectively part of the antenna;
that's why changing the length changes the SWR.
Feedline radiation is more common than most people think. See the
article in November QST.
Alan N1AL
On 11/04/2016 10:52 PM, Matt Zilmer wrote:
It also depends on the line loss per unit
n WB1GCM of the ARRL lab is the curator. 860-594-0210
Alan N1AL
On 10/30/2016 01:54 PM, Don Hall wrote:
Shades of yore!! I learned enough code to pass my Class C code test
given by an ex-Merchant Marineoperator in 1948 by using one of these
belonging to my dad W5RLM(SK).Shows my longevity(age
the KPA100 and KAT100 in EC2 enclosure -- are
at
http://wilcoxengineering.com/kpa100-in-ec2/
In addition to tuning your rig, I can also rescue a building project you might
have started some time ago.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-478-0736 (cell, text)
http://amazon.
had to use an autotransformer to make it work with
European 240VAC.
Then the hotel put me in a basement room where the window looked out
onto a patio, so I wasn't able to put up a decent antenna. I think I
only made two or three contacts.
Alan N1AL
On 10/04/2016 09:36 AM, Wayne Burdick n...@el
On 10/04/2016 09:36 AM, Wayne Burdick n...@elecraft.com [KX3] wrote:
My first attempt to operate from a campsite was in 1972, when I was 14. My dad
chuckled as I hefted my box of gear into the camper. At the time I had no
battery powered radios. The receiver was a Heathkit HR-10B. The
, which weren't even the same amperage! :=)
Alan N1AL
On 09/20/2016 08:43 AM, Ken G Kopp kengk...@gmail.com [KX3] wrote:
My house ... built mid-60's ... had "modern" 3-wire receptacles
throughout ... and was wired with single conductor "knob and tube"
wiring. To a
. If you scroll down to the bottom, there is a description of
the test procedure.
http://www.mail-archive.com/elecraft%40mailman.qth.net/msg94407.html
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
y answer there seems to be headphones. The same goes
for filed days/contests.
Perhaps we should start to wind this thread up now before it outstays its
welcome? :-)
73,
Alan. G4GNX
-Original Message-
From: Don Wilhelm
Sent: Saturday, September 17, 2016 1:58 AM
To: elecraft@mailman
speaker with a
better device. I don’t really want to start campaigning to purchase an external
speaker for the K3 because it’s another ‘lump’ that needs to be carted around
to club meetings and events.
Thoughts?
73,
Alan. G4GNX
I don't know about other countries but in the UK we have (or at least had) a
"MA" suffix, which stands for Maritime Anchored.
73,
Alan. G4GNX
-Original Message-
From: Fred Jensen
Sent: Wednesday, September 7, 2016 10:46 PM
To: elecraft@mailman.qth.net
Subject: Re: [Ele
are portable.
Something also often used is "static mobile". This suffix does not exist and
IMO sounds rather silly.
73,
Alan. G4GNX
-Original Message-
From: rick jones via Elecraft
Sent: Wednesday, September 7, 2016 9:40 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] [
switch is in the "ON" (up) position.
Alan N1AL
On 09/02/2016 04:09 PM, Don Wilhelm wrote:
Pete,
I think you are mixing too many things together, and they are not
necessarily related.
Let me try to 'unravel the ball of twine' for you.
The birdies/mirror images you encountered are not the
I believe that the IC7100 has the facility, but it's an option.
73,
Alan. G4GNX
-Original Message-
From: Phil Wheeler
Sent: Sunday, August 28, 2016 6:06 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KXBC3 clock drift & On-Board GPS
As a matter of curiosity because
well too.
:-)
I don't expect a radio of any sort to show that accuracy and I must admit to
hardly ever checking the K3's time. It would only be important to me if I
had to set alarms by it.
73,
Alan. G4GNX
-Original Message-
From: Rose
Sent: Sunday, August 28, 2016 6:46 PM
To: Clay
amateur bands, reasonably clean and within licence power limits. We rely on
the IARU R1 Band Plan which is well complied with. If the FCC adopted a mode
agnostic approach how much of a threat does it really pose?
73 Alan G0HIQ
Message: 10
Date: Sun, 21 Aug 2016 13:14:57 -0500
From
Photos of the popular "Twins" -- the KPA100 and KAT100 in EC2 enclosure -- are
at
http://wilcoxengineering.com/kpa100-in-ec2/
<http://wilcoxengineering.com/kpa100-in-ec2/>
In addition to tuning your rig, I can also rescue a building project you might
have started some time ago.
Let me build a K2, or other Elecraft kit for you. My prices are reasonable,
and you receive a finished radio with the options you want.
73
Alan
W1HYV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
was at Drake was
specified at 0.5 dB maximum insertion loss and I did a lot of testing
and tweaking to achieve that on all bands.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mai
Let me build a K2, or other Elecraft kit for you. My prices are reasonable and
you have a new radio with the options you want.
73
Alan
W1HYV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
If Elecraft were going to re-brand and re-sell an amplifier from someone
else, which one should they choose, and why?
Alan N1AL
On 07/29/2016 05:34 PM, Guy Olinger K2AV wrote:
This rumor or a close cousin bubbles up out of the stinky mud every now and
then. Don't believe anything until you
> If Alan is reading this, I'm wondering if I missed where that
> 'strategically placed diode' is located?
One way to do it is just to put a pair of back-to-back diodes in
parallel with the inputs. That protects against over-voltage of either
polarity.
One thing I always like to d
the voltage rating is exceeded. The solution is a
strategically-placed diode.
Alan N1AL
On 07/22/2016 12:14 AM, Richard Fjeld wrote:
I was glad that I caught Jim's remark about blowing the 723 by being
connected to a battery with the PS off. And also Myron's answer.
Back in the tube TV days, I
I will buy the extra cables and ferrite
cores and install the chokes. For testing purposes I can just
temporarily disconnect all the panels but one and then apply whatever
works with one to them all.
Alan N1AL
On 07/18/2016 07:32 PM, Alan Bloom wrote:
I am now leaning on going with a local company r
.
Their system uses micro-inverters on each panel, which potentially
should cause less interference because all the switching electronics is
localized with short connections. Only 240 VAC 60 Hz comes out of the
panels.
Alan N1AL
On 07/18/2016 06:49 PM, John Kaufmann wrote:
My advice on Solar City
cost." So I think I'm covered there.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: ht
.7% return on investment, or 8.3% ROI after the federal tax
credit.
http://energy.gov/savings/residential-renewable-energy-tax-credit
Alan N1AL
On 07/18/2016 05:54 AM, Wes Stewart wrote:
I would not be interested in working with Solar City.
http://watchdog.org/191409/congress-probes-solarcity/
On
at 30 MHz. I'm thinking a half-dozen or so of these on each
side would be reasonable. Does anyone have any experience with this
kind of thing?
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
6700 $7499
Icom 7851 $13099
Field upgradeable basic K3S/10 kit $2099
Collins R390A $1500
http://www.ebay.com/itm/Collins-Designed-R-390A-Made-by-Electronic-Assistance-Corporation-/252419777443?hash=item3ac56423a3:g:h9cAAOSwuhhXWhyB
:=)
Alan N1AL
of the
keyboard - I have not yet figured out how to access the number pad on the
reduced-size laptop keyboard). Good idea to print the section. Very
useful for tech- and language-writing in WORD.
Cheers,
Alan V31FA
On Sat, Jul 16, 2016 at 11:02 AM, Charlie T, K3ICH <pin...@erols.com> w
On 07/15/2016 11:02 AM, Jim Brown wrote:
There are exceptions to every generalization, even when the
generalization is good most of the time.
"All generalizations are wrong."
Alan N1AL
__
Elecraft mailing list
Let me build your K2, or any other Elecraft kit. My prices are reasonable, and
you will have a new radio with the options you want.
73
Alan
W1HYV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
K3. It was a major development effort to get it to
work smoothly.
Alan N1AL
73,
... Joe, W4TV
On 7/6/2016 11:36 AM, graham.wo...@mypostoffice.co.uk wrote:
Hi All
I have been trying the Funcube PRO + dongle connected to the IF
output on the K3. It works fine, displaying sigs in a 180k
It's unclear what you mean by "unclear". :=)
Perhaps averaging is turned on. You can turn it off by HOLDing the
AVERAGE key twice. You might also try switching between tracking and
fixed-tune modes. These can be changed via the FixTrack menu selection.
Alan N1AL
On 07/05/201
The P3 does have a noise blanker, which works well on impulse-type
noise. It allows you to see more-or-less the same signals that the K3
sees when its own noise blanker is turned on.
Alan N1AL
On 07/04/2016 08:46 AM, Don Wilhelm wrote:
John,
NaP3 can play through the computer speakers
receivers and panadapters that use an analog I/Q downconverter, the
digital downconverter in the P3 is "perfect" in that respect.
Alan N1AL
On 07/01/2016 11:59 PM, will...@zendamateur.nl wrote:
Hi group,
I have a K3 100 Watt and i bought a P32 with VGA and TXmon, the TX M
. The instructions need to include this step.
My K3 is SN 3329. Perhaps later K3s don't have that round head screw.
73, Alan N5NA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I have built hundreds of K2's and other Elecraft kits. My prices are
reasonable and you receive a new radio with the options you want.
73
Alan
W1HYV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Zero right-handed responders paddled
> left for the same [or any] reasons.
Here's one. In college I was rooming with a left-handed ham about the
time I was switching from a straight key. So I learned on his
left-handed bug. To this day I can send with either hand on a bug or keyer.
the KPA100 and KAT100 in EC2 enclosure -- are
at
http://wilcoxengineering.com/kpa100-in-ec2/
In addition to tuning your rig, I can also rescue a building project you might
have started some time ago.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-478-0736 (cell, text)
http://amazon.
Alan
Do you still have some pictures available? I purchased a K2 with EC2 with
amp and tuner installed but no info from the previous owner how to connect
the two. i found your post online. Do you still have the pictures?:
=POSTED ON ELECRAFT LIST===
Paul,
A picture
If that question was directed at me, the answer is that my issues were not
using my K3 and I only needed to turn off the tuner supply.
73,
Alan. G4GNX
-Original Message-
From: Ramon Tristani
Sent: Monday, June 20, 2016 6:14 PM
To: G4GNX
Cc: elecraft@mailman.qth.net
Subject: Re
om Amazon:
https://smile.amazon.com/gp/product/B00AUB3SSA/ref=oh_aui_detailpage_o04_s00?ie=UTF8=1
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto
You have a new K2 (or any other Elecraft kit) with the options you want. My
prices are reasonable.
73
Alan
W1HYV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Hello,
The radio has now been sold.
Thank you for your interest to contact me about it.
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-478-0736 (cell, text)
http://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
The Y splitter should go on the RS-232 input to the P3, not the K3. That
is, it should connect to the "PC" connector on the P3.
Alan N1AL
On 06/13/2016 08:55 AM, William Levy wrote:
Gentlemen,
My K3 powers on the P3 and the Expert 1.3.
Out the back of my K3 the 15 pin an
that is on that frequency. You can see the same
effect on the K3 if you narrow the bandwidth down to 50 Hz - the signal
will show several S units lower.
This is explained in the P3 Owner's Manual in the section "How to Set Up
and Interpret the P3 Display".
Alan N1AL
On 06/12/201
Interested? I can send you a link to photos.
Sorry, I’m not selling pieces.
I can make changes or updates for you if you want, but only after your purchase.
Price? Best fair offer that I can return to the family.
Please reply directly to me off list.
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40
, depending on the calibration.
With 100W out of the K3 and assuming 100% efficiency in the tuner, the
SWR would have to get up to about 7.7:1 to cause clipping of the
displayed waveform.
Alan N1AL
On 06/07/2016 01:23 PM, Bob Novas wrote:
I wondered if a high SWR affects the waveform
.
Alan N1AL
On 06/07/2016 10:37 AM, Steve via Elecraft wrote:
I have recently added P3 to my K3 and (surprise!) I love it. My
(previously owned) P3 came with TXMON. TXMON works fine with dummy load, but
often
shows very high SWR readings when K3 ATU is used with non-resonant antenna.
I
Knobs and and switches provide the illusion of control…and that my friends, is
what life is all about 8^) Elecraft
does a great job of giving us what we need while giving us what we want….which
is the exception the Rolling
Stones would accept...
Alan/K6ADG
a new
firmware version? I have always used an
approx. 14 Volt power source.
I’m sure this has been addressed before but I don’t see the history…thanks for
any observations.
alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net
Photos of the popular "Twins" -- the KPA100 and KAT100 in EC2 enclosure -- are
at
http://wilcoxengineering.com/kpa100-in-ec2/
<http://wilcoxengineering.com/kpa100-in-ec2/>
In addition to tuning your rig, I can also rescue a building project you might
have started some time ago.
I don't know what the big deal is about the KX2. It was leaked in this
thread 9 years ago!
<http://elecraft.mailman.qth.narkive.com/gRGcEPgT/kx2-sneek-preview-ot>
73, Alan N5NA
__
Elecraft mailing list
Home: http://mailman.q
Me parece que tal vez en en menu CONFIG la entrada "KPA3" esta
equivocada. Debe de ser "nor" y no "Byp".
(Y "TECH MD" debe de ser "On" para verla.)
Alan N1AL
On 04/29/2016 02:57 PM, faber mosquera alvarez wrote:
hola todos
actualice la
local oscillator in
the electronics following the ADC which is used to heterodyne the signal
down to baseband or a lower-frequency "IF". True, it's all done with
ones and zeros but it performs the same function as an analog local
oscillator and mixer.
d off, or is there a way I
can turn it off?
You can turn the display brightness to zero with the "LCD Brt" menu item.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
Engineer: "If it ain't broke I haven't messed with it enough yet."
Alan N1AL
On 04/21/2016 11:22 AM, Clay Autery wrote:
Yup... that's what I'd do...
__
Clay Autery, KG5LKV
MONTAC Enterprises
(318) 518-1389
On 4/21/2016 10:35 AM, Terry Schieler wrote:
s, many so-called "anti-static" mats don't do the job.
And the problem is, there is no easy way to tell. Just because you
managed to build something without damaging any parts doesn't prove the
mat is working correctly. This is one area where it doesn't pay to go
cheap.
Alan N1AL
I think they are using pin 6, the one with the 10K resistor, to get +5V
to the pod. So it probably will involve bridging the 10K resistor with
a smaller value.
Alan N1AL
On 04/15/2016 06:58 AM, Joe Subich, W4TV wrote:
On 4/15/2016 9:31 AM, j...@kk9a.com wrote:
How involved is the radio
I was agitating to call it the "K-NOB" but got voted down. :=)
Alan N1AL
On 04/14/2016 05:10 AM, Barry wrote:
Is this the forerunner to the K-Watch? :-)
Barry W2UP
--
View this message in context:
http://elecraft.365791.n2.nabble.com/New-Elecraft-Product-K-Pod-Control-Pan
Years ago, a local ham who was acting as an Isotron distributor brought
the 80 meter version to the club's Field Day. I discovered I got out a
lot better by unscrewing the shield of the coax connector and just using
the feedline as an antenna. :=)
Alan N1AL
On 04/09/2016 07:17 AM, Doug
highly integrated computer/RF
system. Even though I have been in this business
most of my life, I am still amazed at the capability one can have for
$35….almost enough for lunch for 2 in Silicon Valley.
Alan/K6ADG
__
Elecraft mailing list
By "blanked" it means that the numeric SWR value and the SWR meter
"needle" are erased. The meter outline and scale are still there.
Both the SWR and power meters are blanked in this way when the
transceiver goes back to receive mode.
Alan N1AL
On 04/06/2016 03:14 AM,
p with his old Drake L4B linear after he died. You normally
don't think to ask if a tube-type KW amplifier has been used mobile!
The amp was pretty well trashed, but I was able to get it working again.
Alan N1AL
On 04/02/2016 07:38 PM, Wes wrote:
Jeeze, that's QRP.
My Elmer was a neighbor,
roach to the “mature ham market”. Elecraft is still the primo innovator with
regard to performance,
packaging, reliability and clever circuit design.
Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
other, so I just disconnected
the ALC and will report any issues….silence = happiness.
I mourn the the shutdown THP after the earthquake/floods. It was a terrific
company with a lot of great products with leadership in the mould of Elecraft.
Alan/K6ADG
Steve, K5RS, at k...@att.net.
Thanks to everyone for your support!
73, Alan N5NA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.ne
-voltage lines, simply because it would be a much bigger problem
for the power company if they did.
Alan N1AL
On 03/15/2016 02:27 PM, Jim Brown wrote:
On Tue,3/15/2016 12:56 PM, Rose wrote:
It sounds like you're speaking of a distribution line. Do you have
any idea that the voltage
On 03/14/2016 01:47 PM, Paul Saffren N6HZ wrote:
For those of you trying out the #RCF command, first set your fixed mode to
"SLIDE" as opposed to half-span, full-span, otherwise the P3 will recenter
the cursor as it moves to either edge.
Or "Static".
Alan N1AL
-Paul
. The P3's amplitude can
be calibrated with the "Lvl Cal" menu selection.
Alan N1AL
On 03/07/2016 03:14 AM, Brian J. Linn wrote:
All:
Even after considering the P3 manual (page 21) and with AGC off, I find the
following difference in S unit measurement odd.
Band P3K3
What version of P3 firmware is installed? You need at least v. 1.57.
Alan N1AL
On 03/01/2016 12:59 PM, Joe K2UF wrote:
Trying to use the commands in the P3 pgmrs ref. If I enter a command into
the P3 utility or the K3 utility app they work fine. If I try to place one
of the P3 commands
the KPA100 and KAT100 in EC2 enclosure -- are
at
http://wilcoxengineering.com/kpa100-in-ec2/
In addition to tuning your rig, I can also rescue a building project you might
have started some time ago.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-478-0736 (cell, text)
Williamsport
on the KX3 and the ACC1 XCVR
connector on the PX3.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hoste
, depending on the
setting of the FixMode menu setting.
Alan N1AL
On 02/27/2016 11:26 AM, Vic Rosenthal 4X6GP/K2VCO wrote:
It looks like you are setting the span to 6 kHz. Then what exactly does
#RCF +002500 do?
I'm thinking this only works in tracking mode, not fixed mode -- correct?
73,
Vic
inside of the side panel. I'm guessing that's the most likely cause of
the noise radiation.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:E
in the Genovation keypad solves the problem because it
gives the K3 time to update the P3 with the new frequency before
executing the #FXT command.
Paul and I have been talking about it and may have come up with a better
way to do this. Stay tuned.
Alan N1AL
On 02/26/2016 09:05 AM, Paul Saffren N6HZ wrote
On 2/18/2016 9:52 PM, Scott Manthe wrote:
At more than $6000 per unit (in 2006 dollars), I'm not sure 600 people
would pony up the cash.
That's only $4 per watt, not too bad. The KXPA100-F is twice that! :=)
Alan N1AL
__
Elecraft
o change.
I suppose it could be a "pin 1" problem on the power leads. It's kind
of hard to avoid that with an Anderson PowerPole connector. Probably
additional low-pass filtering on the DC input would help.
Alan N1AL
__
le" menu entry. (Admittedly
not a very intuitive name. :=)
Alan N1AL
On 02/03/2016 08:50 AM, GRANT YOUNGMAN wrote:
The envelope display is not a “snapshot”, but it isn’t quite real
time either. Close, but if you’re used to using a scope for
monitoring, you won’t call it “live”. Also,
of the hamfest and raffle are available at
<http://hamfest.w5qgg.org/> or raffle only at <http://k3sraffle.w5qgg.org/>.
73 & GL,
Alan N5NA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/ele
pecify that it meets ANSI/ESD S4.1 or
ANSI/ESD S20.20. If the only specification is that they use the words
"anti-static" or "ESD" in the product description then be very sceptical.
Alan N1AL
On 01/22/2016 11:15 AM, Richard Thorne wrote:
I've been in my shop for 4 year
is coming down the coax.
Alan N1AL
On 01/19/2016 05:17 AM, k8...@charter.net wrote:
My neighbor is a ham, right now I set up a webpage for us to
coordinate what band we are on so that we are not on the same band at
the same time. I originally set this up for field day but it also
works good for us
I found my PAE-Kx33 also put out hash I could hear when operating near
my mag loop. I put two mix 33 split ferrite cores with 5 turns each on
the DC cable near the power supply. That knocked the hash down so it's
negligible.
73, Alan N5NA
On 1/19/2016 6:10 AM, elecraft-requ
only
downside is there is no positive retention, so you don't want to use
this method if there is a chance the cable will get tugged on.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://m
Nope, tracking mode only.
Alan N1AL
On 01/14/2016 10:06 PM, Vic Rosenthal wrote:
I wonder if it would work in fixed mode or just in tracking mode? I
know the K2's CAT command set is a subset of the K3's. It would be
interesting to hear from someone who's tried it.
Vic 4X6GP/K2VCO
On 15 Jan
401 - 500 of 1852 matches
Mail list logo