The K-Pod manual says that an annunciator in the K-Pod produces a brief audible
tone whenever switches F1 thru F8 are pressed. This does not happen with my
K-Pod and I suspect it is my hearing rather than a defect in the K-Pod. Is
there anyway to increase the volume of the annunciator?
Bill -
Thanks all for the quick response. I just ordered Fred’s book. It’s just what I
needed
Bill W3PNM
Sent from my iPhone
> On Aug 18, 2020, at 16:31, k7...@aol.com wrote:
>
>
>
> Hi Bill,
> Also try Fred Cady (SK) site, www.ke7x.com. It has quite a bit on macros.
> 73
> Jim H K7sss
> In a
I just got a K-Pod and I'm in the process of teaching myself how to write
macros. Is there any more user friendly documentation than the
Elecraft Programmer's Reference Rev G5, 2/20/19?
Maybe a list of existing macros for the K3?
Bill - W3PNM
Thanks to all who suggested a solution! Most of the hams on this list could
easily work for the engineering or design departments at Elecraft. Sadly I am
not one of them. I didn’t realize the mistake I was making when I did a EEinit
on my K3S without a current config file.
Fortunately Elecraft
I recently did a Parameter Initialization on my K3S. I didn’t save the current
firmware configuration as I’ve never done any custom programming on the radio.
After performing the initialization, a full rotation of the Power knob only
goes from 0 to a maximum of 12 w on any band. Prior to the
I'm trying to mix my K3s sidetone audio with Skypes audio out by using a
software mixer called VoiceMeeter. This will eliminate the mic on my Skype
camera trying to pickup the audio coming from the K3's speaker and hopefully
eliminate most of the audio artifacts. Does it matter where I pick off
Many thanks to those of you who answered my initial query regarding Win4K3.
Tom, VA2FSK has reached out to me and answered my many additional questions!
73 - Bill - W3PNM
__
Elecraft mailing list
Home:
I posted the question in the QRZ and eHam forums but only got one response so
far.
I’m evaluating the latest edition of Win4K3 and I’m not sure I see the
advantage of controlling the K Line through software as compared to doing so
directly.
I want to be fair to the author so what am I missing
Is a P3 vs LP-Pan / NaP3 a fair comparison? Am I trying to compare apples
to oranges?
Bill - W3PNM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I’d like to start contesting and plan on using N1MM with my K3S. Is there any
advantage on adding a Winkeyer to the mix?
Thanks in advance,
Bill - W3PNM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I have an Elecraft K3S and a Heil PR10. I recently started getting complaints
about my audio and may have inadvertently changed a setting on the radio.
With regard to this combination of mic and radio, where should I set the
following:
Mic Gain Range - Low or High?
Mic Bias - On or Off?
Can anyone point me to a good Mac specific resource explaining how to set up
fldigi to run on a Macintosh so it works with my K3S. The software's multitude
of different menus has me stumped with an ever increasing frustration level.
I've had many enjoyable SSB and CW QSOs so I know the antenna,
I'm new to Elecraft and was wondering how most of you handle digital
communications.
Use the K3 Utility program for digital modes or something like SignalLink USB
with fldigi or equivalent?
Bill - W3PNM
__
Elecraft mailing list
Home:
I just completed assembly of my K3S, KAT500, KPA500 and P3. I didn't order a
microphone from Elecraft. I am considering a Heil PR-10 but will welcome any
suggestions.
Bill - W3PNM
__
Elecraft mailing list
Home:
I’m considering the purchase of a K3S and was wondering what are the pros and
cons of building versus buying a factory radio. Is building worth the $200 in
savings?
Bill
W3PNM
__
Elecraft mailing list
Home:
15 matches
Mail list logo