i do not think that is yet enabled
wayne made a comment the other day
saying something to the effect of when it
will work suggests it does not work yet ...
mine does not yet either and reports the same comment Johnny.
bill
At 08:50 AM 7/19/2008, Johnny Siu wrote:
my lin out is set to nor 025 and the
MK2r recording/ digital controls on the bottom right front panel
are set about 12 high
and all my apps have great audio input
bill
At 08:32 PM 7/19/2008, Lyle Johnson wrote:
Is there a trick to shut off headphone audio and take it off the
REGARDING comment about broadcast band attenuation in the txrx pin
diodes///thur the regular ant 1 2
i guess using the bnc on sub rx is the easy/best way for me to
do broadcast ???
bill
response from Wayne
That's true, Bill. If you go straight to the sub receiver through
its
that is why the Top Ten AB antenna switches use two relays to gain isolation...
bill
At 02:04 PM 7/17/2008, Jim Brown wrote:
On Wed, 16 Jul 2008 21:15:14 -0700, Ron D'Eau Claire wrote:
In this case Eric is saying there may be a leakage path through a relay.
Right. Almost all problems have
the fan on the ity bitty gamma research super Cap supply is VERY quiet.
and worked well for the field day K3 GOTA station
and just got the UPS SHIPPING NOTICE for KRX3 !!
bill
___
Elecraft mailing list
Post to:
I was somewhat fearful of taking my K3 to field day without protection.
we all know how important that is these days. :)
So I made a field case for th K3 ... and one for a pair of 7ah
batteries
all fits into pelican 1520
Aside from a minor concern of not adequately cooling the
nice chart
looks like the results are from a Bruel Kjaer.
But can you explain what sort of chamber was used,
maybe it is a left over from the psychedelic days ...
Shure Bros , AKG Sennheiser use an Anechoic...
(n. anechoic chamber is a shielded room designed to
At 04:09 PM 4/22/2008, Jeff Kinzli N6GQ wrote:
I've traveled with my
With my K2 qrp with SLA in a pelican case with antenna wires etc
I went from Chicago to London to Cairo,then Cairo thru
Stuttgart to Barcelona
then a boat to Lisbon... and air back to London to
At 05:20 PM 4/22/2008, K9ZTV wrote:
Took a KX1 to Maui last O
The only suspicions I ..
while in the Caribbean,, on a VERY big boat.. I had the k2's
antenna sticking out on a extended tent pole from the room's balcony,
the guy in the room next door asked if the fishing line dropping
As I goy my k3 #44 i wired up a spare Shure 414b... it's a mini
hand held mic with very sharp audio... as fern noticed great without
touching the eq settings no bias required
Keep you eyes open for used ones, as they are oops
( i just make that up ) ...out of production sorry
bill ny9h
I have had problems with powerline noise... and the K2 NB can have a
big difference.
If you have many multiple sources of noise, maybe not. But here is a
'youtube' of my noise blanker on off... with a 7800 scope picture
of the noise
Worked great on THIS example if powerline noise.
whomever gave you the radio wired it for a particular mic
configuration ( elecraft/kenwood or Icom or ? )contact the
giver/builder and find out how he configured the mic
jumpers/connector. It will save a bunch of time .
If he wired it for ICOM mics, as I did , just grab any icom hand mic.
At 06:41 AM 4/1/2008, Phil Debbie Salas wrote:
Get the PwrCrimp from West Mountain Radio.YES.
--
After reading the ad copy about gooey black tape on your 12 v connections;
and avoid having a hi amp 12vdc short fire. I WAS SOLD ON
Damon, KC5CQW wrote
BTW, I just found out that UPS ground shipping with insurance
to Elecraft is about $48!!! I think I got ripped off!
I just hope the repairs are simple!
ANY BIG shipper... probably not elecraft ( too small) can get BIG
discounts from UPS.Probably fedx also.
At 10:22 AM 3/27/2008, Darwin, Keith wrote:
Just call me Mr. Waffle.
I feel like a kid who has climbed the high-dive and is standing with his
toes hanging over the edge of the board, nervous and unsure
JUMP IN THE WATERS FINE.. the radio is great also.
bill
much like other radio/s...
You will not find the necessity of going back to retrieve a stable version.
None of the changes has had me EVER thinking I wanted to go backwards.
bill.
At 11:57 PM 3/15/2008, Dick Dievendorff wrote:
Each firmware version completely replaces its predecessor.
During Clipperton Ducie I found myself, ( AS DID SEVERAL OTHERS :( )
out of band calling after I managed to hit the UN-split button
missing the REV button. I don't need any help looking stupid.
Using the single rcvr SUB button as REV makes great sense to me.
bill
At 07:52 PM 3/10/2008, Dave G. wrote:
One wish --- and I don't even have a K3 yet...
A General register stack... for BBC, Radio Australia, etc..
and wgnwbbmwwv .
oh. that is where the 80 meter band went :)
___
Elecraft
At 02:37 PM 3/3/2008, [EMAIL PROTECTED] wrote:
..for the 100-W assembled model (K3/100), the rig is
comparable in both features and performance to transceivers listing
at up to six times its price.
WITH THE WEAK DOLLAR, I'll bet ICOM would love to catch up by
increasing the the 7800
ProIII's can now be had for as little as $2384.10. I guess we could
call it The K3 Effect? As always, it's interesting watching the
market reactions to new gear.
I would think that the reduction of the P3 is rather traditional
marketing. As a product ages...and/OR nears it's end of life, a
They said The outstanding receiver and transmitter characteristics
allowed us to run two positions simultaneously on any band -- even
the very narrow 30 meter band -- with absolutely no interference.
Good design makes the complex appear simple: the ins and outs of
this sophisticated radio
the BHI product is sold in the states by GAP
it does work better( my opinion) than the clearspeech product.
Hope I'll be able to determine someday that the K3 is/will be as effective
haven't been able to compare the two. YET.
bill
At 12:20 PM 2/25/2008, David Cutter wrote:
Here's
as far as audio crunch I agree the current iteration is not
as penetrating as a good RF clipper could give it albeit it IS
distortion but deem favorable by many. KEY WORK : CURRENT.
Hard to believe that solardx contributes to Eham , yet is not on the reflector.
Perhaps by
did I miss something ... is there a 3rd party software to load the
memories of the k3
I looked at HRD but didn't find that facility.
bill
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
did I miss something ... is there a 3rd party software to load the
memories of the k3
Not just the keyer memories but the frequencies with all the parameters.
bill
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
Brett,
talking about operating split.
let me recommend a great little book... by an ex neighbor, a fellow
Elecraft owner,
and THE guy who wrote the book on DXing.
The Complete DXer by Bob Locher...w9kni
http://www.eham.net/reviews/detail/3363
I'm going to change out to BNC also
they are good to at least 4x the K3 output power...
and well past UHF and small quick bayonet !!!
(just like the other bncs on the back of my K3.)
bill
However, I've used BNC's on mine. Oak Hills Research
sells a 2-pack with beautiful
how about a youtube video recording..!
that might be one of the first GOOD uses of youtube...
bill
At 12:28 AM 2/19/2008, David Cutter wrote:
It would be good for the wider amateur community if someone could
make a recording of that.
David
G3UNA
Good news indeed about the K3 being
you might be able to place an electret element in the case and leave
the original element in there You'd have to rewire since the
astatic has a 3 conductor
plug on the mic housing. I have placed an electret ( small ) in
front of a dynamic AKG element in my current station microphone,
you can just put you call into the memory space with the IM...
then hitting it several times, as many as you need for repeat
( chaining ) ... the display even tells you it's chaining the
memory hits together;
then take over with the paddle...
got ducie rtty today ... on 20 ...
I
when i wired both my k2 for Icom mics everything was working fine till.
I used the icom sm-8 .It also grabs dc from the up/down circuit to
power the mic, rather than using the dc bias on the audio line. Had
no audio and it took me a while to figure it all out..
and my k3 ( in my
holy cow,,,
a $1.59 electret mic element from radio shack works GREAT with
all my icoms and my K2s and K3.
And where do the kenwood Icom and Yaesu Mics ( bob's ) come from
from companies that actually make microphones like Primo,
panasonic Foster in JA land. In EU Sennheiser...
ed is correct
check the schematic you'll see that there are components still in
line when in bypass.
bill
At 10:23 AM 12/30/2007, Ed K1EP wrote:
If I recall, according the Aptos, there is capacitance/inductance
left in when it says Bypass to match the impedance of the bypassing
ATU
The DZ transceiver was at Dayton two years ago. Had a booth back by
the GM exhibit. As I recall their manual was an exact look a like of
the old Heathkit manual.
The set was a busy looking set, but with a pile of feature/benefits
including I believe a second receiver option. Interesting the
too bad the computer industry doesn't have any nice desk microphones
as it does have some GREAT headsets. like from altec koss or
logitek ..comfy...with a boom electret,I noticed a telex
brand baby shotgun desk mic , that would work but needs a ptt switch...
How about a tiny
how about a computer network jack wired to a foster type plug
bill
At 08:51 PM 12/17/2007, Joe Subich, W4TV wrote:
Don,
That's easy, just open the mic plug and re-wire it for the K3
pinout - or if you want to continue using it with Yaesu equipment,
build a Yaesu to Elecraft
the new 10 watt lpa
Not that I plan on taking the bottom off frequently,
It's ALOT BETTER AND EASIER THAN THE K2
..and as I did it could only think of the k2's lpa procedure,
bill #44
While we're talking disassembly, let me point out that Wayne specifically
avoided needing
the new 10 watt lpa
Not that I plan on taking the bottom off frequently,
It's ALOT BETTER AND EASIER THAN THE K2
..and as I did it could only think of the k2's lpa procedure,
bill #44
While we're talking disassembly, let me point out that Wayne specifically
avoided needing
with
sorting subject matters and models can
thank you,
(and yes, I did get mine,,,)
bill ny9h
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
At 12:53 PM 12/4/2007, B. Scott Andersen wrote:
I am wondering if it might be appropriate to consider splitting the
Elecraft list into two lists: one for the K3 and one for all other
Hi Scott,
I have my email set up so the K3 stuff has it's own folder... and
goes right in...
Actually
Guess there is an advantage to having an amp (like the ACOM 2000a)
that upon a fault condition like a bad coax,,,high swr shuts itself
into a fault standby modesuch as happened when i was feeding a
bad 80 meter feed line.
This rather than relying on an exterior component ( on an ALC
Now THAT subject line will hit all the mailboxes/folders
With all the great stuff flowing along, it certainly makes it easier
if we keep the model in the subject line
just a request from the midlands, where it's 21F, the ground is
frozen and I worked my first K3 yesterday.
thanks
anyone a K3 to K3 qso on 20 ??? 40 ??
bill
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
both the Watson..PS. and Dealer-Importer RL's brand Jetstream PS
obviously come from the same offshore vendor.
I was thinking about the Watson small unit with a pile of supercaps
sort of a super Gamma.
bill
At 12:03 PM 11/30/2007, you wrote:
I don't know if its a rebrand - I believe
for a little more than 100$ I was able to get a sennheiser boom
headset, ( sllightly used) ... HMD 280 ( the d is for dynamic
mic)... work great on the k3
( and my icom)...
At 02:15 AM 11/26/2007, Simon Brown (HB9DRV) wrote:
I use good Sennheiser headphones - I like to listen to the
up on the top of the updater there is a screen under help
firmware release notes , with a historyof what changes
hope this help
bill
At 10:26 AM 11/23/2007, Dave G4AON wrote:
My updater has collected MCU firmware versions 1.34, 1.35, 1.36,
1.38, 1.39, 1.41 and 1.42 and I've only
I have had that esd wrist strap and mat for years
and the K3 was an obvious place to start using them...
bill
At 07:51 AM 11/23/2007, Julian G4ILO wrote:
On Nov 23, 2007 12:48 PM, Dave G4AON [EMAIL PROTECTED] wrote:
You must use anti-static precautions. It's foolish to assemble a
i DO notice a difference ...between the k3 info and
the swr/wattmeter on it's output.
I believe it is due to the tuner components still in the line
when bypass is selected. AM I CORRECT ???
bill
___
Elecraft mailing list
Post to:
here is my 'contribution' to the assembly photos
it is an epson site no cost , no signup , just view
http://albums.photo.epson.com/j/ViewPhoto?u=1771119a=32611738p=75992458
or you can go tophoto.epson.comand VISIT by putting in
my email address which is above in
that statement ( from Plantronics) is so marketing
The last thing Plantronics wants is to have dispatch centers who pay
160-300 per headset DISCOVER how to integrate mass marketed PC
marketed ( read low pricepoint) microphones into their systems. Yes
they may be built to endure a tougher
don's cautions are very valid.
a trick i learned was to pack the set with the bottom facing up .
This way i can use the tilt-stand as a handle to lower the set into
the foam cutout.
Likewise the tilt-stand becomes a handle to pull the set out of the foam.
Better than trying to dig into
ok ok 44 is alive and well, in Chicagoland
still qrpmaybe KPA today..
1 Q was 3DA0TM
2 Q pj2/k8nd
took my time, breaking even to listen to my wife play the piano...
she knew i was working on the k3 and was impressed,(duh)
7-9 hours sounds rightall the stuff went together
why look out side
.it's a bird
it's a plane
NO it's MR. UPS.
AND HE HAS THE WHITE BOX,
the early bird GOT the BIG WHITE BOX TODAY,,
SN TO FOLLOW
bill ny9h
___
Elecraft mailing list
Post
got the verification email day before yesterday, asking to check out
my order
followed by an acknowledgement saying I would hear within the next
two weeks,.,,,
Keeping in mind my was ordered on 4 / 27.with half payment;
SHIPPED LAST NIGHT AT 9:45 PM..
tick tick,
I'll
not CORRECT...
AS FAR BACK AS 1985,,, in another life , Eric was dealing with
outside contractors
I know this as I was the midwest sales rep for Mountain Computer
and Eric was key engineer in bring along a product which came from a
company then known as Lucky Goldstar whether he
not CORRECT...
AS FAR BACK AS 1985,,, in another life , Eric was dealing with
outside contractors
I know this as I was the midwest sales rep for Mountain Computer
and Eric was key engineer in bring along a product which came from a
company then known as Lucky Goldstar whether he
Mark wrote:
Geez, I am amazed. There is no pleasing some people.
.. SO VERY WELL PUT...
HOWEVER Mark;
I take exception to your suggesting that ICOM
fits the example of : stuff slung out the door without proper
engineering or quality control, go buy something
not such an expectation.
bill ny9h
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Elecraft_K3/
* Your email settings:
Individual Email | Traditional
* To change settings online go to:
http://groups.yahoo.com/group/Elecraft_K3/join
(Yahoo! ID
too bad the FCC recently allowed the AM digital to run at nightime,
which makes adjacent channel listening rather difficult. With too
wide a receive bandwidth...will not the IBOC digital streams come
into the audio demodulation
( obviously I am talking about AM broadcast band... not SW )
initial symptom was the autotuner would lock up/ reset the
radio when tuning ...only on 40 , so I ordered the PA upgrade kit...
when running the k2 @ qrp .. the swr reads correct and the PA is
basically out of the circuit,.1.3 this is on 40. both on
the set AND THE LP-100
now
an oscillation at
about 600 kHz (what frequency does the LP100 say is being transmitted).
Note for others following this thread - the C31 change is *only* to
be installed if the KPA100UPKT has been installed.
73,
Don W3FPR
Bill NY9H wrote:
initial symptom was the autotuner would lock up/ reset
and I'll bet we'll all get schematics with our new K3 in a week, or
two or a few weeks,
tick tick tick
bill
At 07:14 PM 9/26/2007, johnny wrote:
Hello andrey,
Agreed. One of the purpose for kit building is - self training and
education especially for a non radio man like
blabla bla,,,
should add a week to that and conservatively set the official K3
first ship date for Monday Oct 8th.
10/ 8 I get it ..
wow ... is Eric slick or is this just coincidence
APCO 10 Codes. These codes are used by police. Each code represents
a phrase. ... 10-8In
Brett i wrote:
he only thing that bugs me is it looks from the pictures like
the K3 uses the same (no fidelity) speaker as the K2.
( love that name Brett same as my own boy !!)
as far as NO FIDELITY same as K2 speaker...
that speaker plays VERY loud for little input...good choice.
Not
I again get to see a K3 in 4 days .
bill ny9h.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
Elecraft stuff
A chance for the East, Mid South Coast guys to get a close up and
the full K3
story from Eric.
see ya there or work us on 40 meters. W9D Special Event Station
Fri Sat..!.
bill ny9h
And the JAs did NOT give us DIN connectors DIN is the abbreviation for
Deutsche Industrie Norm or in English, German Industrial Standard.
and we owe them to Dr. Preh... founder of Prehpreh.com.
I used to represent them, they sold tons of quality switches to
moto, when moto made phones
after persisting against Commonwealth Edison for OVER A YEAR AND
ONE HALF... even after intervention by the FCC causing no ComEd
action, and then our state commerce commission finally got it
fixedS9 line noise from 3 poles,
I KNOW ,,, IF YOU CAN'T HEAR IT , YOU CAN'T WORK IT,
no amount
OTOH, Eric heading off to Japan could be seen as a sign that things
are on or ahead of schedule for the end of August.
won't it be something when the K3 adorns the cover of JA's CQ Magazine
as Japan Ham Fair pick of the show
bill
___
At 12:19 PM 8/16/2007, David Cutter wrote:
The SSM2165 is a good speech compressor and not expensive. I'm
assuming it will work on data? to bring up the level as required.
wonder if the control of the existing SSM2165 on the K2's ssb board
is adequate to optimize the data
bill
resellers/distributors provide a function of local inventory.( or are
supposed to)
in this day and age.
with the internet, and our friends at FedX UPSit's tough for
the brick mortar sellers to add value. I'd guess 15%-20% margin
plus another 3- ? % in promotional funding. That
WHICH PROMPTS THE QUESTION,,,
was the K3 able to decode RTTY in the window
bill
At 12:18 PM 7/22/2007, Rick Tavan N6XI wrote:
North American QSO Party, RTTY
Comments:
Made my 1st RTTY QSO in 37 years the day before the contest.
Thanks to W0YK for goading me into RTTY.
At 12:50 PM 7/22/2007, J. Edward \(Ed\) Muns wrote:
WHICH PROMPTS THE QUESTION,,,
NOW THAT THE ELECRAFT WAY
IT DOES THE STUFF IS WAS SUPPOSED TO DO THE FIRST TRIP OUT THE DOOR !!!
tick...tick...tick
bill
___
Elecraft mailing
At 08:38 PM 7/17/2007, Werner Denise Haschke wrote:
I have always been told by the ex Air Force people that crimps were the
only method for any high vibration cabling.
The day before the BS8 ( scarborough expedition) went on the air...
my rotor stopped turning...
The motor inside the M2
Isn't it great that we all have choices.
Like I am going to wait two years ,,, or
I am not going to wait two yearsmaybe three weeks
all because we have choices, which we make on our own criteria.
first batch Bill ny9h
At 01:35 PM 7/8/2007, Stephen W. Kercel wrote:
With all
I'm looking for the instructions / schematic for Don Brown's solar
charge controller.
I'm getting ready for the forth , and want to put it in a metal
box , but not certain of the heat sink's groundability.
anyone point me in the right direction , email me the schematic/
instruction
At 03:29 AM 6/27/2007, John GM4SLV wrote:
On Wed, 27 Jun 2007, Julian G4ILO wrote:
...then you switch to analogue SSB until the signal goes below the
threshold of S/N that makes SSB readable, after which you switch to CW
and give yourself another 17dB to play with...
when icom demos their
At 07:04 AM 6/26/2007, Don Wilhelm wrote:
BUT, you were fortunate that the relay did not have any internal
damage. When the case of a relay is melted (even a small amount),
there is a chance that the inside of the plastic can be distorted
and will interfere with the movement of the contacts
I forgot to take real measurements at Dayton .
Any beta or factory people able to share the actual dimensions from
the front of the BIG tuning knob( assuming that is the most
forward part)...
to the back of the fans...or the back of a right angle connector on
one of the coax
I forgot to take real measurements at Dayton .
Any beta or factory people able to share the actual dimensions from
the front of the BIG tuning knob( assuming that is the most
forward part)...
to the back of the fans...or the back of a right angle connector on
one of the coax
here is a site with three good looks at the front panel ...
http://www1.snapfish.com/slideshow/AlbumID=160267565/PictureID=3257417063/a=13220814_13220814/t_=13220814
the box was closed. at this particular occasion/ otherwise I'd have
some tight inside shots. ( if permitted)
bill ny9h
Come on guys (gals)...how many radios? Why would that be proprietary?
Really Does Macys tell Gimbels ?
cu tomorrow !!! [EMAIL PROTECTED]@%$# I get to see my new K3
bill
___
Elecraft mailing list
Post to:
in my opinion.
I have an expectation with Eric Wayne..and Elecraft that if such
hardware changes are necessary that those early adopters would be
covered like a blanket.
Bill NY9H K2# 269 K3# ___
Now this is the spot where we hear some comment from Eric or Wayne
saying something
not too fan or RF noisy at all,,,
i HAD to check it out ,,,
so i looked it's actually a 5 or 8 amp supply feeding the ultracaps,,,
I found the oem switcher in either mouser or digikey as well as the caps
gamma did a great job packaging it ,.
I also think a thinner ac cord would be in
with the FCC becoming more and more deaf to our pleas to fix broken
powerlines and the like ; wouldn't it be great for somebody ( hello
Larry LP Jack PAN)
to make a NB widget hat was tunable width /depth and whatever
parameters are needed...maybe using his PAN box to examine the junk ???
I
it be ICOM,
or Elecraft... one of the reasons we make the trek... right
bill ny9h
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
At 04:03 PM 2/23/2007, Ron D'Eau Claire wrote:
Unlike almost all modern mics, the original D-104 has a shaped frequency
response curve for optimum speech quality. It has a broad peak in the 3 kHz
not unlike all modern mics,
the Shure SM58... is probably the world's most popular mic
element ( and they usually are ) the level will be
fine!. My computer headset fits into my K@ pelican case for vacations.
bill ny9h
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
keep in mind if you want to run split, with a second receiver, ( or
orion or such) no need to be rewired to give you the Left
Right and when mono, just plug them in...
bill
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
At 09:46 PM 1/2/2007, [EMAIL PROTECTED] wrote:
I .. I have two extra Icom
mics. Will they work
i wired both of my K2s as icoms... if you put mic pin 8 to the
speaker output line,
you can even use their headsets
Most of their mics are electret condenser mics, an electret is an
you might think about grabbing one of these AV switchers / videogame
selectors that switch video plus left right audio... some have
rotary switches, some have pushbuttons...switching up to 5 different devices,
I've bought some very inexpensively,,,usually at
fleamarkets/hamfests for 5$,,,
something sort of strange just happened when i ordered some of this line...
the site recognized me as a previous customer and WANTED TO SHIP THE
ORDER TO THE PREVIOUS CUSTOMER...
not too certain just what i did wrong , or what happened...
I checked with site, .. he's checking it also,.,,
I KNEW U DID NOT FORGET ME EITHER.,...
tnk for the copy to the list,,,
bill
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
I use a 1450actually 2 of them
Originally I had hoped to have thew K2 face out the front,.,,, can't
be done , the radio must sit sideways otherwise there is not
enough protection ... AND THE SCREW FROM THE VENT WILL WACK THE TUNING KNOB
The set sits upside down , and the bail
could be generated beyond the AD chip.
bill ny9h
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
I remember back years ago , having a blank TT 509 front panel
anodized black, guess I spent too many years in the consumer
audio business.
Then I learned to appreciate the old tt GREY ( INSTRUMENTATION)
with a whole string of TT boxes... Titan / Herc/ 253/238/omni6,
I like the
After a 4th july trip with my k2 upon keying it goes hi current, then
does a reset.
At any power level, any mode, any band,
finals not shorted, but get instantly hot when trying to go to
transmit before it resets. Can't measure any transmit voltages ,
since it won't stay in xmit,.
I
next clue : i pulled the outputs, which are not shorted and the set acts ok ,
that leads me to believe that I got a lowpass filter issue
especially since I get almost dead short at the output of the
finals/ input to the LP filters,,
onward,,,
bill
After a 4th july trip with my k2
guess it depends upon what YOU call an entire station
I have my k2 qrp, batt/tuner/ ps/ antenna/ headset/palm paddle, solar
panel/ logbook/, license/ english CEPT agreements/mic, antenna, in a
gray pelican 1520,...
I have the kpa100/kt100 in an ec2 in another black 1520 for hipower,
with
JUST PUT A XFORMER ON IT ...
I remember when Altec's Bart Locanthi while doing a stint at JBL
developed the first directly coupled complementary symmetry amp SE 400
It was a sold state map that WAS clean, not like Hafler's ST-120.
( that would be a dynaco)
Everyone else used output
101 - 200 of 241 matches
Mail list logo
