Dave -
Make sure windows is allowing Winlink modem app to use the microphone.
Settings/System/Sound/"Related Settings" Microphone Privacy Settings:
Allow Apps to access your microphone: ON
Allow desktop apps to access your microphone: VARA HF MODEM, whatever else you
use
Bob - W3DK
I can successfully connect using Winlink, and both Winmor and VARA
protocols. However, ARDOP has me stumped. I can't figure out how to setup
ARDOP without VOX. Anyone have a recipe for ARDOP configuration? Thanks,
Bob - W3DK
__
Elecraft
[mailto:weave...@usermail.com]
Sent: Thursday, October 17, 2019 9:31 AM
To: Bob Novas; Bob Novas via Elecraft
Subject: Re: [Elecraft] Question on frequency when in fine/medium/coarse
The undisplayed digits are used, i.e. the freq does not shift to the displayed
100Hz. In my example the freq (while
, but there’s
nowhere that says one way or the other that I can find. Bob - W3DK
From: Bill Weaver [mailto:weave...@usermail.com]
Sent: Thursday, October 17, 2019 8:34 AM
To: Bill Weaver; Bob Novas; Bob Novas via Elecraft
Subject: Re: [Elecraft] Question on frequency when in fine/medium/coarse
to be dialed in before going to Coarse tuning?
Thanks,
Bob Novas - W3DK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I have Winlink Express running quite happily on a laptop, talking to a K3S thru
the K3S’s USB cable. I configured Winlink Express on an older desktop, and it
did not play with the same K3S - although the Winlink Express can (e.g., using
VARA) transmit a signal; it “hears” nothing. The USB
http://k9yc.com/ChokesTLData.pdf gets a 404 not found error. I'd be
interested in seeing the document. Bob - W3DK
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
elecraft-requ...@mailman.qth.net
Sent: Monday, January 14,
Can anyone provide details on configuring an K3S and Winlink Express for
winmor operation? I'd appreciate any details you can share. Thanks, Bob -
W3DK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
My house occasionally has a power failure, typically lasting less than a
minute. One just happened. Do I have to worry about operating the K3S and
having a power failure? It would be like turning off the power supply
without first turning off the K3S, and I understand that's not recommended.
Do
Can I just makeup a 4 wire cable that is longer than the cable supplied with
the K-Pod? Any gotchas?
Thanks,
Bob - W3DK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
About the only thing I like about using my Drake R4C over my K3S is that I can
cover a lot of band with a couple of twists of the Drake's tuning knob, at
25KHz per rotation. However, it's tough to clarify SSB at that rate, though
it's actually not too fast for CW for me.
I'd love to see the
I have the same complaint about time, when displaying time in VFO B - it
toggles between time and frequency. I'd like it to stick to what I set it to!
Bob W3DK
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of zachary
http://www.emp-bags.com/
Bob - W3DK
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dale Chayes
Sent: Wednesday, September 06, 2017 2:31 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Radio storage cases
The true
Well, I guess my point is, it would be nice if it were less fiddly and more
"elegant". A modular radio that came apart with a lot less fuss. Plugin
boards. It's a packaging problem.
I love operating the radio. I'm just not keen on maintaining it.
Bob - W3DK
-Original Message-
Messing with the sub-receiver is such a PITA that I will procrastinate
putting a new filter in for weeks before I gather the courage to pull it
apart.
Bob W3DK
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of George
Thornton
Sent: Wednesday,
Another ham oriented, US based company bites the dust.
https://www.icmfg.com/
It's a shame. I don't know if that affects any elecraft filters, but it does
affect my old Drake boatanchors. Bob W3DK
__
Elecraft mailing list
Home:
try http://www.therfc.com and
http://www.mouser.com/Wire-Cable/Hook-up-Wire/_/N-5ggs/
Bob - W3DK
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Morgan
Bailey
Sent: Wednesday, February 15, 2017 8:29 AM
To: Phil Hystad; Elecraft Mailing List
on the joint/board/etc.
73,
Don W3FPR
On 12/26/2016 7:03 PM, Bob Novas wrote:
> I successfully reflow soldered the surface mount 6.8 ohm resistor
> across R82 in my K3S today. It took me a while to get my courage up,
> but it worked out well.
>
>
>
> In the kind of reflow soldering
I successfully reflow soldered the surface mount 6.8 ohm resistor across R82
in my K3S today. It took me a while to get my courage up, but it worked out
well.
In the kind of reflow soldering I used, you melt some solder and flux on the
tip of a temperature controlled iron, and then, while
On 30 meters, and only on 30 meters, the P3 display does not agree with the
signals that the K3S receives. It's wrong by about 20 or 30 KHz. In other
words, where the P3 says there's signal, I hear nothing, but if I tune up
about 20-30KHz, I hear a signal that I think is what's on the P3. Any
John - when you say 4 turn coil around the copper pipe, what exactly do you
mean? What I'm wondering is, what is the orientation of the 4 turn loop
with respect to the copper tubing loop? You don't mean that you wound the 4
turns around the copper pipe do you? The two loops should be in the
I would open up the power plug that goes into the wall socket and check its
wiring. I suspect that plug is doing something bad with neutral and ground
- like maybe connecting them together. Bob - W3DK
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf
I have assembled power poles incorrectly and noticed that they didn't "stick".
However, when I assemble them correctly, they stick great and like Ken and
Detrick said, I can drag my K3S around by the power cord. You have to be
really careful to assemble them with the correct orientation of
I'd very much like this function too. This would be my primary use case for
the KPod
Bob - W3DK
> On 9/2/2016 10:20 AM, Joe Stone (KF5WBO) wrote:
> > The PigKnob is already capable of controlling the PX3 markers. You
> > simply need to ask Elecraft to port the #MAA and #MBA remote-control
> >
There's a TalentCell Rechargeable 72W, 132WH 12V 11000mAh battery available
on amazon for $65. (https://www.amazon.com/gp/product/B016BJCRUO). Does
anyone have any experience with these? I'm wondering if this battery would
comfortably power a KX3. Thanks, Bob - W3DK
For me, the TMP connectors were hard, and installing the sub receiver was
hard. The rest was reasonably easy. Go slow and follow the advice in this
thread. Maybe someone else has words of wisdom on the TMP connectors. The
TMP connectors killed my fingers. I wound up using needle nose pliers to
I like it a lot! Still have to figure out what macros to setup.
In the way of a wish list, what I would really like to do with the tuning
knob is have it control the small knob on the P3, and assign one of the
k-pod buttons to do what happens when you click (push) that knob. The way I
like
meh. Buy the HF tool and if you use it and it breaks, buy the Snap-On variant.
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Clay
> Autery
> Sent: Sunday, July 17, 2016 2:58 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Help
FWIW - twisted pair calculator - https://www.eeweb.com/toolbox/twisted-pair
Bob - W3DK
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Guy
> Olinger K2AV
> Sent: Tuesday, June 21, 2016 11:09 AM
> To: Walter Underwood
> Cc:
I wondered if a high SWR affects the waveform that the P3 displays -
wouldn't the voltages be higher at high SWR? would that put the txmonitor
into a non -linear region?
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Alan
> Bloom
> Sent:
Ward Silver gives what is I think a great Ham Radio, where goest thou ("Ham
Radio, now what") a version of which is available at
https://www.youtube.com/watch?v=nUTndhyh79U that is somewhat applicable to
this group. Hopefully not too far off topic. Bob - W3DK
I am building a Raspberry Pi based external K3S touch screen thought
experiment. At the retail level, the cost of the hardware is about $100.
The touchscreen would control every aspect of the K3S that can be controlled
via the computer commands. This would be in keeping with the Elecraft
what he said. Bob W3DK
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tony
> G6GLP
> Sent: Tuesday, May 31, 2016 5:07 PM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] K-Pod order status
>
> Hi All,
>
> With all this talk about the KX2
Taking an idea from the folks that use a computer mouse as a morse code key
for kids, what about using the guts of a wireless mouse as the wireless
business end of a wireless paddle. Connect the paddle contacts to the mouse
left and right button connections in the mouse, and use the mouse's USB
I was going to complain about a strange behavior with the K3S and P3, and
then I thought, I wonder if it has anything to do with fldigi. And it did.
I don't understand this, but here's what happens.
On 30M, and only on 30M, if I tune a signal in on CW or SSB and while
watching the P3 display
3S
>
> What's a K-Pad? Elecraft getting in the tablet business?:-) I know of a
K-Pod.
>
> On 5/21/2016 1:35 PM, Bob Novas wrote:
> > Say, just for the sake of the argument, that I were to purchase a
> > K-pad. If I want to power it from the K3S over the cable connected to
&
h the 6-pin data cable, with minor radio
modification
>(the latter method results in a single cable to the K-Pod for data and
power)
>
> On 5/21/2016 11:35 AM, Bob Novas wrote:
> > Say, just for the sake of the argument, that I were to purchase a
> > K-pad. If I want to p
Say, just for the sake of the argument, that I were to purchase a K-pad. If
I want to power it from the K3S over the cable connected to the plug on the
bottom of the K3S, do I have to modify the K3S to get power to the K-pad?
If so, how much do I have to take apart? Would it make any sense to
P3
> > without messing with the P3 front panel knob would be an EXCELLENT aid
> > for both DXing (especially if you could do it with VFO B) and S
> > contesting.
> >
> > 73...
> > Randy, W8FN
> >
> > On 5/12/2016 2:36 PM, Bob Novas wrote:
> >
I'm really interested in the KPad, but specifically for use with the P3. The
K3/K3S already has a nice knob! I like to use the P3's knob to tune to a
signal and then push the P3 knob in to set the K3S receiver to that
frequency. Most of the time I can very accurately hit as SSB signal, if I
turn
O! I really like the idea of the K-Pod controlling the P3 marker knob,
that hasn't come up before. That's enough to swing my opinion to wanting
one. How does that play with the 3-way switch? Bob W3DK
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On
https://en.wikipedia.org/wiki/Small_matter_of_programming
No no, it's a minor detail.
Bob, W3DK
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred
> Jensen
> Sent: Thursday, April 14, 2016 5:35 PM
> To: elecraft@mailman.qth.net
> Subject:
W support see:
> https://groups.yahoo.com/neo/groups/mixw/info
>
> For SSTV help see:
> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>
>
> On Tue, 2016-04-12 at 12:27 -0400, Bob Novas wrote:
> > you're gonna make me turn it on, aren't you. Fix-Track mode, where
> > the sp
W3DK
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave
> Cole
> Sent: Tuesday, April 12, 2016 12:17 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Will the K4 look like this?
>
> On Tue, 2016-04-12 at 11:3
Something I noticed from the video that I like is that the entire waterfall
display moves when you tune the radio -the waterfall doesn't smoosh out over
the screen. I think that's an improvement over the equivalent mode on the
P3 where the waterfall fractures when you tune the radio. Bob W3DK
>
Dick - The P3 and Fldigi are really looking at very different signals and have
very different uses although there is some overlap, and that's what maybe gets
confusing. The P3 is a "fish finder" for a big hunk of a band - the P3 looks at
the K3's IF and can represent as much as 200kHz of it
The Pi 3 is very appealing by virtue of space and low cost. I'm interested but
for a K3S and P3. Bob, W3DK
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Andy
> McMullin
> Sent: Thursday, April 07, 2016 10:50 AM
> To: Elecraft@mailman.qth.net
When I'm in SSB mode and I tune down to the CW frequencies, I can easily
tune in a CW signal. Then, I switch to CW mode, and the CW signal is gone
because I'm on the wrong sideband. Even if I'm on the right sideband, the CW
signal disappears. Shouldn't I be able to switch from SSB to CW and not
I've used Realterm with success. http://realterm.sourceforge.net/ You'll
probably have to make a bump on the wire cable.
Bob, W3DK
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
brian
> Sent: Monday, February 22, 2016 2:20 PM
> To:
Today I installed a KRX3A in a K3S. Not my favorite day. On the plus side,
I plugged the K3S in and everything seems to be working. Big grin! On the
negative side.
1. I do not believe there is anywhere described installing the TMP
cable between KREF3 J5 and KRX3A J82, other than in
I'm dismayed by much of what I hear on 75. I think one of the best behaved
bands is 17. Bob
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
> Brown
> Sent: Sunday, February 14, 2016 12:41 PM
> To: elecraft@mailman.qth.net
> Subject: Re:
When I use text decode on my K3S, it works nicely but the time display pops
up every so often and then goes away. Is this normal or do I have something
misconfigured. Thanks, Bob - W3DK
__
Elecraft mailing list
Home:
0163
> >
> >
> >
> >> On 2/7/2016 11:31 AM, Nr4c wrote:
> >> Should be VFO B frequency, not time.
> >>
> >> Sent from my iPhone
> >> ...nr4c. bill
> >>
> >>
> >>> On Feb 7, 2016, at 11:16 AM, Bob Novas <bob
I downloaded the 11x14_Hershberger zip archive and ran the cessb.m script
through a fresh install of Octave 4.0.0 on a Windows box.
- I had to install the signal package (pkg install -forge signal)
- I have to load the signal package every time I start Octave (pkg load
signal)
- I had to comment
I'm trying to use WSPR 2.1 with a K3S and the USB hookup. The K3S works
with fldigi just fine, but no joy with WSPR. I set them up on the same COM
port. Is there something else I need to do? Thanks, Bob W3DK
__
Elecraft mailing
Ed - What are you putting the output power to -- a dummy load or an
antenna? Do you have the KAT internal antenna tuner? If there is an SWR on
the antenna line that the KAT is tuning out for the transceiver, then the W1
will read forward power and reverse power on the antenna line whereas the
I've managed to hookup my K3S to my Windows 10 box and receive PSK31 using
fldigi, but I'm not having success transmitting. I put the K3S in VOX mode,
USB, 14.070. I set the Mic+LIN to ON. When I click the Tune button on
fldigi, the K3S transmits, but with very low output. I can't find any
Far as I can tell, there is no 15KHz output from the K3S that can be used
for experimenting with SDR. Is that correct? Thanks, Bob W3DK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Thank you to everyone that responded. I took the bottom cover off and
immediately saw the problem - It was an assembly mistake. I had installed a
standoff that was 1/32 too long on the screw holding the PA shield -- the
screw at the top of the rear bottom panel that's above the right foot,
there's a whole bag of leftover parts. Kinda like when I rebuilt my engine.
:)
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dauer,
> Edward
> Sent: Monday, December 07, 2015 6:54 PM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft]
I must have done some kit assembly wrong. My K3S does not sit flat on a flat
surface, rather it rocks. Furthermore, the seam on the bottom between the
front and back cover plates is not flat. Any hints as to what to look for?
Bob - W3DK
I set the time display in my brandy new K3S to WWV yesterday to within 1
second. Today it's 7 seconds slow. Is there anyway to adjust this? I hope
it's not using the reference TCXO! The frequency was and is spot on WWV at
15MHz. Thanks, Bob, W3DK
62 matches
Mail list logo