Hello,
I am looking for E620021 and E620044 parts to make voltage and frequency
probes. Does anyone know where I can buy them from a third-party
supplier? Are they available from Elecraft?
Many thanks,
Chris KM1B
__
Elecraft mailing
nvenient but some may have bad effects on our spectrum.
Cutting corners in design affects spectrum users, and having dozens of
devices in every home adds up...
73,
Chris K0PF
On 1/6/2024 6:33 AM, Andy via Elecraft wrote:
I have a general question to better understand analysis of SSB ( R
Hello,
I misplaced mine a while ago and want to buy one if you have an extra or
don't need it.
Please reply with the price shipped to 02038.
Many thanks,
Chris KM1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Yes, Steve, all modes supported by the KX3 are usable on all bands, including
those using either internal or external transverters.
I am using my KX3 now primarily as the I/f for my 10GHz rig and have used it on
multiple modes including CW, SSB, FM, AM, and digital.
Chris Cox, N0UK
chr
Hello,
I misplaced mine a while ago and want to buy one if you have an extra or
don't need it.
Many thanks,
Chris KM1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
version of the manual that
came with the radio. I downloaded the e-version, but my computer does
not fit in my day-pack!
73,
Chris K0PF
On 12/4/2023 9:13 AM, Walter Underwood wrote:
This all-text document has a physical description and documents the
audio-CW feedback.
https
. It should be in the fw release notes, really...
73,
Chris,
K0PF
On 12/1/2023 9:59 AM, Bud wrote:
Folks …
I recently invoked the latest firmware update on my KX2 (s/n 1031).
Upon beginning use of the KX2 after the firmware update two changes to the
operating configuration were noticed
Hello,
I have a K2 with its USB off by about 1.9kHz. This K2 was built by someone,
and I am the third owner. How do I calibrate it? Moreover, the audio of
USB mode is a little harsh to my ears. Everything else seems working fine.
Thanks,
Chris KM1B
, if there are any), ZELLE and VENMO is okay
for payment.
Personal or Cashier's checks are okay, but time will have to be allowed for
ample time to clear and be deposited.
Please contact me off list. QRZ email is current.
73
Chris
KD6EOS
are okay, but time will have to be allowed for
ample time to clear and be deposited.
Please contact me off list. QRZ email is current
73
Chris
KD6EOS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
and SKCC group site, and
the feedback from readers has been almost embarrassing. One fellow called
it a "modern-day seminal work on CW." Several said they wish they had it
when starting out. ALL have called it a good read.
Enjoy!
73
or should I have heard about the KSYN3A already?
Chris Cox, N0UK
chr...@chris.org
https://www.credly.com/go/IR77aRbH2rFDdOiymuxu2w
> On Feb 28, 2023, at 14:53, Pete Smith N4ZR wrote:
>
> Well, for what it's worth, I'm one of those waiting 2+years for an update
> kit, and a we
3.3 ohm SMT resistor?
Chris
KD4PBJ
> On Jan 23, 2023, at 15:43, Rich WC3T wrote:
>
> My totally uneducated guess is that it’s a surface mount capacitor. I did
> an image search and found what resembles you have. That’s all I can offer.
> Good luck.
>
> 72,
>
Hi Don,
Thank you for the info. The issue with my K2 is with the transmit audio,
so would the same BFO frequency for the receiver affect the transmitter?
Best,
Chris KM1B
On Sun, Nov 6, 2022 at 1:56 PM Don Wilhelm wrote:
> Chris,
>
> That condition is normally the result of
Hello,
I have three K2's, and one of them has a very strange symptom. It works
well in LSB and CW, but USB transmit audio seems very narrow. Receive
audio in all modes works well with no issues.
Thank you in advance,
Chris KM1B
Hello,
I have a faulty KDSP2 module. The message that I get from DISPLAY button
press is in the attached picture. Normal state should show 'S1 nr nt' but
mine shows 'Sn G 7.0'. I have replaced it with a working DSP module, and it
works fine. Any ideas?
Thanks,
Chris KM1B
It was found to be a faulty KDSP2 module. Can anyone help me with
troubleshooting? The battery was checked OK, and there is no visible issue
anywhere. Any suggestions?
Many thanks,
Chris KM1B
On Fri, Jul 29, 2022 at 2:47 PM Don Wilhelm wrote:
> Chris,
>
> Do you still have
if there is any solder joint.
Many thanks,
Chris KM1B
On Fri, Jul 29, 2022 at 1:47 PM Don Wilhelm wrote:
> Chris,
>
> Do you still have sidetone? If so Control Board U9 is still active, so
> check the MUTE signal and CB Q6 and Q7 operation.
>
> If you have the KDSP2
long enough, but it
disappears about 10 minutes after powering on, so something must trigger
the loss of receive audio. Any suggestions will be helpful.
Many thanks,
Chris KM1B
On Tue, Jul 26, 2022 at 10:43 AM Chris wrote:
> Hello,
>
> I have two K2/100, and one of them developed
the issue must be in the AF section. Any suggestions?
Many thanks,
Chris KM1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
That looks interesting, Ken. I had not seen such a tool before. I’ll dig
deeper and see if they make a version for 6.3mm plugs too.
Chris Cox, N0UK
chr...@chris.org
https://www.credly.com/go/IR77aRbH2rFDdOiymuxu2w
> On Jul 20, 2022, at 11:53, Ken Winterling wrote:
>
> How about
I helped a neighbor remove a broken headphone connector from her daughter's
iMac laptop.
I used a pin vise and a tiny drill bit like I use for drilling holes in PC
board. I drilled by hand into the broken connector barrel using the pin vise
and slowly worked the broken plug body out.
Chris
I have suffered the very same failure but on my K3. Despite extensive attempts
on my part, removing the dislodged tip has proven futile and it appears that
the female jack will need to be replaced. Removing it might help but it’s just
too finicky for me.
Chris Cox, N0UK
chr...@chris.org
.
But, with the SP3 external speaker plugged in, the problem goes away!
Any insights much appreciated.
Chris
VK2ACD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
s and options have been installed.
> >>> If it is below SN3000, and has not been upgraded, it will have a low
> >>> price, but if above 3000 with all upgrades he should get a good price.
> >>> There is a good list of upgrades in the K2AtoB instructions for the
> b
was hoping to combine the minor
radio repair with installation and checkout of the two items that I had ordered.
Chris Cox, N0UK
chr...@chris.org
https://www.credly.com/go/IR77aRbH2rFDdOiymuxu2w
__
Elecraft mailing list
Home: http
ffer any thoughts on where I might ask around - or advertise a
"wanted" Other than eHam.net.
Thanks in advance,
Chris VK3QB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman
on where to check first? Thank you.
DE KM1B Chris
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
-Haul.
Chris KM1B
On Mon, Apr 11, 2022 at 8:31 PM Wes wrote:
> Good Grief.
>
> I look at these groups as like starting a conversation with my neighbor
> over the
> fence about crab grass. (Where I live we have neither fences or grass,
> crab or
> otherwise. so I'm sp
Hi Gary,
You can disconnect the paddle and do a continuity check with your
multimeter. It seems that the problem is on the paddle. You can easily
disassemble it to see where the problem is. I did clean mine, and it is
fairly easy.
Best 73,
Chris KM1B
On Tue, Mar 8, 2022 at 11:57 AM Gary
Wayne said:
"Did I mention we're also working on a DX tractor beam?"
No secret there - the attraction from Elecraft is very strong...
73 - Merry Xmas - and HNY
Chris NW6V
DDddd-dddDD
__
Elecraft mailing list
Hi Jim,
Excellent article. I haven't checked if it is a source of noise, but it
doesn't quite matter because this is a charger, not a power supply. I only
use it when I need to charge a battery, so it is OK.
Best 73,
Chris KM1B
On Wed, Nov 24, 2021 at 2:03 PM Jim Brown wrote:
> On 11
%2CB00CV6HZSG%2CB089SV4W5H%2CB085CD1F5V%2CB082VQJQJP%2CB07B4V3HC4%2CB075YN8XLP=1
Chris KM1B
On Tue, Nov 23, 2021 at 9:47 PM Douglas Hagerman via Elecraft <
elecraft@mailman.qth.net> wrote:
> Looking for ideas for a cheap 14 volt wall wart type power supply for
> recharging the
I am trying to use my K3s with a program but it does not list the K3s in
the drop down list
is there another rig from the drop down list that would let me use that
is the same as the K3s
thanks Chris
--
This email has been checked for viruses by AVG.
https://www.avg.com
I’ve heard nothing since sending in my order back in the early Spring. Nothing
either on the KX3 TxInhiibit VOX bug reported to Elecraft in August last year.
Chris Cox, N0UK
chr...@chris.org
> On Oct 1, 2021, at 10:50, Pete Smith N4ZR wrote:
>
> It's been more than a month since E
Wanting to know the price of new P3 and SVGA board in US$
before they were discontinued.
thanks
Chris VK2ACD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Hello,
My KXPD2 paddle has some issues. It moves very sluggishly and causes
errors. The manual doesn't have any service instructions. Is anyone else
having the same problem? Any suggestions?
Thanks,
Chris KM1B
__
Elecraft mailing list
Still hoping for some resolution to this problem since it’s now been a year
since it was reported to and acknowledged by Elecraft as being a firmware bug.
It really renders the KX3 as fairly useless as an I/F rig for microwave
transverters if you need the TxInhibit function.
Chris Cox, N0UK
Hello,
Is there an easy source for the 10-pin connector for KAT2, or do I have to
get it from Elecraft directly? Mine needs to be replaced.
Thanks,
Chris KM1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
: Set both
ports to COM4 and the rate to 38,400 b/s. Neat!
Chris
NQ8Z
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
on Winlink. All the work has been with ARDOP Winlink
sessions.
Do I need a cable from the RS 232 port to the computer USB port?
Do I need a K3S special setting?
Thanks,
Chris
NQ8Z
--
Sent from: http://elecraft.365791.n2.nabble.com
/color at a time.
When I started my work was buying the wire from Digi-Key and it was $60 for 100
ft spool. They no longer do and didn't know about other supplier.
I can connect anyone interested with the rep there I use.
Chris
KD4PBJ
Monteagle TN
> On May 2, 2021, at 16:09, Mark Goldb
vision in your mind's eye
crystalizes into reality.
Thanks for sharing your visions with us :-)
73 Chris NW6V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto
opy.
I did have to reprogram myself to listen at the lower frequency -
familiarity had bred contentment.
73 Chris NW6V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
an external keyer or straight key to send code.
Oh, what a palaver!
Chris Cox, N0UK
chr...@chris.org <mailto:chr...@chris.org>
> On Feb 27, 2021, at 1:52 PM, Chris Cox, N0UK wrote:
>
> Thanks for that suggestion, Jim.
>
> Chris Cox, N0UK
> chr...@chris.org
>
>
>
Spot on,Phil.
Chris Cox, N0UK
chr...@chris.org
> On Jan 18, 2021, at 12:07 PM, Phil Kane wrote:
>
> On 1/18/2021 6:10 AM, Steve Hall wrote:
>
>> During my hamming of over 50 years, the FCC has never felt it necessary to
>> threaten hams not to break the law, t
absolutely gobsmacked at how well such a physically small
antenna plays on HF and am willing to stand up for MFJ (at least in this
particular case).
YMMV, of course…
Chris Cox, N0UK
chr...@chris.org
__
Elecraft mailing list
Home: http
Thanks Dick and Mark for your replies.
My cable was purchased from elecraft,
I will get an FDTI adaptor and see how that goes.
Chris
VK2ACD
On Mon, Jan 18, 2021 at 10:42 AM Dick Dievendorff wrote:
> This is probably a message from a Windows USB driver install. I don’t
> recall
?
thanks
ChrisVK2ACDK3/10 serial no. in the 600's
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
I had this happen with a neighbors daughters laptop. I was able to get a small
diameter drill bit like is used for drilling pcb holes and using a pin vise put
a few twists of the bit into the broken part of the connector. Then I gently
pulled it out.
Chris
KD4PBJ
> On Jan 15, 2021, at 11
I had a zoom based oscilloscope demo with our Keysight rep last Wednesday.
They said the $25 k scope I got for our lab at work has the same oscilloscope
ASIC chip that the million dollar one has, it's just the bandwidth you are
paying for.
Chris
KD4PBJ
> On Dec 19, 2020, at 12:32 PM, Ste
Tuning on my K3 stops at exactly 30.000MHz.
Chris Cox, N0UK
chr...@chris.org
> On Nov 13, 2020, at 8:08 AM, Chris Cox, N0UK wrote:
>
> Hi, Martin.
>
> Thank you - that is great to hear. I will give that a try and see. I didn’t
> realize that I could actually tune ab
Hi, Martin.
Thank you - that is great to hear. I will give that a try and see. I didn’t
realize that I could actually tune above 30MHz directly, although I had not
even tried.
VY 73!
Chris Cox, N0UK
chr...@chris.org
> On Nov 13, 2020, at 3:02 AM, Martin wrote:
>
> Chris,
&g
or is the low-level output available by default?
--
Chris Cox, N0UK, G4JEC
chr...@chris.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
ion was unquestionably the key to 80M DXCC from
this QTH.
Point is: if my K3 hadn't already had that second receiver, it's unlikely I
would have added one just to try. So if you can swing the cash - like a
good scout: "be prepared."
73 Chris NW6V
Terry N7TB said:
>
> From:
&
better. ;-)
73,
Chris, W2PA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
.
Chris Cox, N0UK
Chris Cox, N0UK
chr...@chris.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
the effect.
Again, all works just fine if I don’t try to key the paddles before PTT
sequencing has changed over.
Chris Cox, N0UK
chr...@chris.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Just as final follow up, a mosfet switch worked for my requirements perfectly.
73! Chris Cox, N0UK
chr...@chris.org or chr...@britishcaranddriver.com
> On Aug 31, 2020, at 18:26, Chris Cox wrote:
>
> I’ve thought the problem through further and have decided to use a simple
> m
I’ve thought the problem through further and have decided to use a simple
mosfet switch in the connector shell to invert the TXInh logic sense and
configure the KX3 for -TXInh instead of +TXInh.
Hard switching the GPIO pin showed that to be a usable workaround.
73! Chris Cox, N0UK
chr
Thanks all - hopefully it now knows what a transverter is.
Chris Cox, N0UK
chr...@chris.org
> On Aug 31, 2020, at 1:31 PM, Raymond Sills wrote:
>
> HI Chris:
>
> You have to "teach" the dictionary to understand that transverter is a real
> word. For whate
And why does my Mac ALWAYS rewrite TRANSVERTER as TRANSPORTER?!
Chris Cox, N0UK
chr...@chris.org
> On Aug 31, 2020, at 12:50 PM, Chris Cox, N0UK wrote:
>
> I wish to interface my KX3 to my portable 10GHz transporter system. I have
> the transporter’s PTT sequencer configur
not exactly ideal.
Anyone else done this or similar and, if so, what was your solution?
73 Chris
Chris Cox, N0UK
chr...@chris.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I suppose an off list email address would help. ve3xkz at gmail dot com.
Thanks
73
Chris VE3XKZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
and pay for shipping of course.
Thanks 73
VE3XKZ Chris
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
have done this.
Best 73,
Chris KM1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
n.
As per the engineers and the experience of others, the behavior you're
seeing is not part of the design per se.
73 Chris NW6V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfa
Right sir I understand. I just mean I don't have large towers and big antennas.
Just want be protected since we are up high.
Chris
> On Jun 5, 2020, at 1:09 PM, Jim Brown wrote:
>
> On 6/5/2020 10:23 AM, Chris Waldrup wrote:
>> This is probably overkill for QRP but I wanted
form and you're good to go.
Chris
KD4PBJ
> On Jun 5, 2020, at 12:23 PM, Chris Waldrup wrote:
>
> Hi Phil,
>
> I use Erico One Shot cad welds on my workshop grounding system. Everything is
> tied together with cad welded bare 6 AWG and I have 8 foot ground rods,
> al
to exposed rock in certain
parts of the property. This is probably overkill for QRP but I wanted to do it
right like we used to do in broadcast.
Chris
KD4PBJ
> On Jun 5, 2020, at 10:19 AM, Phil Kane wrote:
>
> On 6/4/2020 8:50 PM, Ed Tanton wrote:
>
>> I should have mention
ways, YMMV :-)
73 Chris NW6V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please he
Thanks everyone for all of the great suggestions.
--
Chris Cox, N0UK, G4JEC
chr...@chris.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Thanks Alan and Mike for the two suggestions.
And, yes Mike, you’re correct about adTHANKSvance!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Can anyone recommend a safe polish or other to aid in buffing out a minor
surface scratch on the plastic (Perspex/acrylic?) screen cover on a PX3?
inTHANKSadvance
Chris, N0UK, G4JEC
__
Elecraft mailing list
Home: http://mailman.qth.net
everything but the K3 when I went to
an HOA restrictive community for five years.
Any help would be appreciated.
Chris Pinholster
k4...@mac.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Walter,
Bravo!. :-) I'm going to steal this line... :-)
73 Chris NW6V
On Tue, 25 Feb 2020 08:09:02 -0800 AM wrote:
>
> "Turning a PDF back into structured text is like turning hamburger back
> into a cow."
>
>
>
___
.
Running a low cost sdr and the software to drive the K3 from the PC works well
though.
Vy pleased with the K3S, but a tad disappointed with the P3 TBF.
Vy 73
Chris
F1rpo
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Calling an upgraded K3 a K3s may be an overstatement, but the price seems
pretty good for an upgraded K3s.
Chris AD1AD
On Thursday, January 9, 2020, Clay Autery wrote:
> I'm sure this is just a misunderstanding. No one would intentionally
> misrepresent their Elecraft gear in th
below 10m but appeared very
broad-banded above, using an SDR receiver.
73,
Chris, W2PA
On 12/14/2019 4:43 PM, K9MA wrote:
I guess it just shows how little I've been on 10, but I've had the
KPA1500 for over a year now, and I just noticed that when I turn it
on, my noise floor on 10 goes up
wall, the BNC connector was about half
an inch or so from the right wall.
The 2800 would have more than enough room. For reference, I keep mine in a
Pelican 1200, and there is just enough room for the transceiver, hand mic, and
power cable. I hope this helps.
73,
Chris, AC4MP
> On Nov 9, 2
(for enough turns) to filter any remaining
RFI.
Also, If you can get the monitor at a best-buy or some other place that
allows returns without restocking fees, you should be able to find one that
fits all your criteria.
Please let us all know what you find that works!
73 Chris NW6V
__
ends. With
the Powerpoles, I can use on any cable close to the power source.
Hope this helps,
Chris, AC4MP
> On Oct 15, 2019, at 5:19 PM, Don Wilhelm wrote:
>
> Terry,
>
> The KX3 has internal protection, but a fused power lead (only necessary in
> the positive lead) p
alling "CQ VVV." There's a
picture on my QRZ page. The key works well up into the low 20s, but I'm
always happy to QRS.
Feel free to join in and send some Vs yourself! Hope to work you on the
air! Oh, and I'll be using a K3 and KPA500...:-)
73 Chris NW6V
__
It appears not, although I was wondering the same thing.
--
73 Chris Cox, N0UK, G4JEC
chr...@chris.org
On Mon, 22 Jul 2019, Frank Krozel wrote:
> I’m not sure if this is ever been asked before but can a KX3 remotely control
> a K3?
Off-line responses please
de Frank KG9H
Sincerely,
Hi
A minor error in the newsletter article on the WWVB, should be 60kHz.
Chris
VK2ACD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Will the Bioenno batteries have enough terminal voltage to get the 15W?
I'm looking at a 9Ah unit and if so will stop by Gigaparts on the way home from
work today and pick one up.
Chris
KD4PBJ
> On Jun 25, 2019, at 9:46 AM, Walter Underwood wrote:
>
> That may be, though the dischar
Thank you.
Gigaparts is local to me and I see they have the Bioennos in stock!!
Chris
> On Jun 24, 2019, at 4:35 PM, Jim Brown wrote:
>
>> On 6/24/2019 12:59 PM, Mark Goldberg wrote:
>> Go with LiFePO4 cells
>
> Yes. This ham-friendly company sells a wide ra
Yes sir using 7AH gel cell.
Just found out the issue as it works to 15W on a bench supply so the issue was
pointed out to me by a kind list member that this is intentional limiting while
on lower capacity batteries.
Chris
> On Jun 22, 2019, at 1:16 PM, Scott Manthe wrote:
>
> Are
it to go above 10W using the power control.
> Any ideas?
> Thanks in advance.
>
> Chris
> KD4PBJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mai
I agree. SMD soldering is actually much faster than through holes because
you don't have to trim leads. It is just a matter of getting used to small
parts. Magnifying glasses will definitely be necessary for most of us.
Reviving K1 with SMD parts will make a very trail-friendly radio.
On Thu,
Thanks for the detailed reply. That makes sense entirely.
To note this K2 shipped in early May so there may be problems still.
Best regards,
Chris M0XTE
On Wed, 29 May 2019, at 14:49, Don Wilhelm wrote:
> Chris and all,
>
> Let me try to add some clarity to this J310 situation:
>
replacement!) and that worked consistently across the board.
I have however substituted the Elecraft supplied replacement which matches the
On Semi one now as well.
Thanks to Don for landing on this issue straight away. Next steps in progress
now.
Best regards,
Chris M0XTE
On Tue, 28 May 2019
Hi,
Received replacement J310 and EEPROM today. I will install the J310 this
evening and see where it goes, failing that the EEPROM.
Big thanks to Don and Elecraft's excellent support.
Best regards,
Chris M0XTE
On Tue, 21 May 2019, at 23:37, Don Wilhelm wrote:
> Chris,
>
> If it is
connected hear warbling from PC speakers. WJST-X settings are nominal
also Unless there are secret KX2 WSJT-X setting.
Maybe there will be a FT8 setting in the next firmware release. nudge nudge.
Thank You
73
ChrisVE3XKZ
__
Elecraft
. The
issue is the control data sent to the DAC is the same.
Thanks for your help. Some ideas to try!
Best regards,
Chris
On Tue, 21 May 2019, at 19:05, Don Wilhelm wrote:
> Chris,
>
> If your kit was shipped between mid-August 2018 and mid-January 2019,
> then the most likely problem
!
Best regards,
Chris M0XTE
On Tue, 21 May 2019, at 18:11, Dave Van Wallaghen wrote:
> Chris,
>
> I have worked on a few late model K2'S of late with the exact same problem.
> The folks in support are currently looking into it to determine the source of
> the problem.
&
lines are doing
their thing correctly.
Anyone got any ideas why the control word is the same? VFO reading on display
is changing fine.
What can I do to get out of this hole?
Any help appreciated.
Best regards,
Chris M0XTE
__
Elecraft
of those
three phases is then typically split between three properties at the
outdoor powerpole.
--
73 Chris Cox, N0UK, G4JEC
chr...@chris.org
On Sat, 18 May 2019, Jim Brown wrote:
> On 5/18/2019 4:28 PM, Clay Autery wrote:
> > 230VAC on 3 wires? Never knew they did 3 wire 220V
not foul the control board either.
Cruddy MS Paint cross section: https://m0xte.uk/pub/k2-encoder-mount.png
Hope someone finds this useful.
Chris M0XTE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
is better on 2m at the moment.
Thank you for the quick response, very much appreciated.
Vy 73
Chris G1rpo
Sent from my iPad
> On 22 Apr 2019, at 03:51, Don Wilhelm wrote:
>
> Chris,
>
> Have you tried ordering the part from Elecraft? I am assuming they still
> have some in s
1 - 100 of 989 matches
Mail list logo
