Okay here is the solution.
I downloaded this file NetFx20SP2_x64.exe from the MS site and it worked.
Thanks for the help. Dan
I have been using this without any trouble on WIN 8.1 Pro then,
I installed a new hard drive, and I can not re install the program.
When I go to install I have a pop
and warnings
about uninstalling .net framework.
So I need some input on this before I attempt anything and possibly mess up
a fresh Windoze install.
Thank you for your help.
For now, headed out to the park this morning with the KX3 and Alexloop.
Everyone have a great day.
Dan KM6CQ
--
KM6CQ
Dan
. This is like a computer keyboard when a screensaver
is running the first keypress is ³swallowed² to wake up the screen, then
subsequent keypresses work normally. Any ideas here?
Thanks,
Dan Sherwood W6DAS
__
Elecraft mailing list
Home
, and
it appears to be in the CAT rig control. When I finally get CAT disable,
requiring a restart of FLDIGI, the problem seems to have mitigated.
Funny how you can run a configuration for 2 years and never have a problem,
until one day poof! Perhaps the issue is software related after all.
73,
Dan
comment from a discerning individual
that there was audio break-up at peak modulation.
I've not yet rigged up a scope on the PS, pending comment from others.
Dan
AC6DM
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA500-power-fluctuations-tp7590332p7590951.html
Sent
Addendum:
KPA500 LCD voltage metering also fluctuates rapidly when in Operate mode and
under load. Nominal voltage 60 volts at 500 watts output. Fluctuation
amplitude cannot be discerned since variations are rapid.
Dan
AC6DM
--
View this message in context:
http://elecraft.365791.n2
My KXPA100 also has a slide switch. I confirmed that it works properly
however,
when used with the KX3 and *KX3 to KXPA100 Integrated Adapter Cable*
The amplifier is powered up and down with the KX3 power button's. So you
will not be sliding the switch.
Dan KM6CQ
an HF net during an
EMCOMM situation.
TNX
Dan W6DAS
Alternate email: w6...@sbcglobal.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Is the Banjo tuner menu driven? It should be accessible from the front
panel.
Dan
--
KM6CQ
Dan Baker
www.km6cq.com
@danielbaker
DM09dn
SKCC: 8260 NAQCC: 6817
QSL via LoTW, eQSL, Direct.
D-Star REF014C
__
Elecraft mailing list
Home
of footprints on my box. And no, I do not work for any of the
above.
73, Dan
--
KM6CQ
Dan Baker
www.km6cq.com
@danielbaker
DM09dn
SKCC: 8260 NAQCC: 6817
QSL via LoTW, eQSL, Direct.
D-Star REF014C
__
Elecraft mailing list
Home: http
Is it possible to send the band data from the KX3 to the KPA500 and KAT500
so they can follow the radio?
Thanks,Dan
--
KM6CQ
Dan Baker
www.km6cq.com
@danielbaker
DM09dn
SKCC: 8260 NAQCC: 6817
QSL via LoTW, eQSL, Direct.
D-Star REF014C
Is it possible to pull band data off the KX3 and send it to the KAT500 so
it will follow the radio?
Thanks, Dan
--
KM6CQ
Dan Baker
www.km6cq.com
@danielbaker
DM09dn
SKCC: 8260 NAQCC: 6817
QSL via LoTW, eQSL, Direct.
D-Star REF014C
Can someone please send me the correct size/dimensions for the KAT500
power plug. I cannot find it anywhere.
Thanks,
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Thanks, Don. Several different coaxial plugs fit the jack, but wanted
to make sure my friend purchased the correct size. Unless I am blind, I
could not find this kind of information in the manual. An oversight, I
guess.
73,
Dan
On 1/19/2014 11:19 AM, Don Wilhelm wrote:
Dan
antenna settings from band to band and have all set to 'main' and can notice
no difference between the setup from band to band.
Any help as to what I'm missing? I should mention that the VFO B works fine
in split mode.
Confused in frigid Ohio!
HNY
Dan W8CAR
Dan AD5NW
p.s.
Thanks for all the help a few months back on my k2. Works like a champ!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
to measure the voltage across the test points
of the DL1, I see a very nice 3-4 watts on all bands (translating the
voltage on the DMM to watts using the graph provided on the DL1 manual).
Phew! I'm set to go. Thank you!
Dan, n0da
On Mon, Sep 23, 2013 at 5:09 AM, Don Wilhelm w3
watts on 6 meters. Wow, now thats an opening! I am in love!
Dan AD5NW
Louisiana
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
great fun.
Great job Elecraft. Proud to now be a part of your family.
Dan
N2DRM
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
the crew at Elecraft has
them all beat! Wish Elecraft was around back in the 60's hi hi. Anyway,
Thanks guys. One feature, How about a carry handle for the K2? Annd,
any ideas how I can widen the bandwidth on 160? ( just kidding)
Dan AD5NW
Houma, La
KIO2 RS-232 Interface and Aux I/O for Elecraft K2 Transceiver
I have a partially completed KIO2 kit - I no longer have a K2
From the Elecraft website =You'll be able to do full computer control of the
K2 with the KIO2 installed, and you won't need an external level converter,
since the KIO2
I would like to know if anyone has 2 or 3 EC1 enclosures they wish to part
with, and what price they wish to sell them for.
WB4NMR
sent from my MacBook Pro
Dan Swartling
dsw...@tntech.edu
__
Elecraft mailing list
Home: http
to track it down but if someone else has had this and
fixed it I would love a point in the right direction. Thanks.
Dan
AD5NW K2 #7412
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
the unlock as it says in the errata but still cant find the entry
) Seems the menu entry went away.
Dan AD5NW
Houma
KX3 3039
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Reference the lost RX NR x entry. I found it. I had to turn on TECH MD.
Put that out there for folks!
Dan
Houma
KX3 3039
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
on the nets
Dan AD5NW
K1 #2086
K2 #7412
KX3 #3039
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
under PF1.
I¹d like to be able to use the PF1 key without the computer attached, plus
the embedded commands available for the CW buffer.
Am I missing something here?
Firmware 1.14 appears current. Utility 1.4.3.22 for Mac.
Thanks
73
Dan
W6DAS
, or there is something causing it
to completely skip over the contents. The 20M light blinks continuously and
never stops.
73,
Dan
Hi Dan,
The 'W' command does not send the CW memory, it sends any text following the
'W' command. For example: W,de_n6hz; would send 'de n6hz' in CW
immediately
?
73,
Dan
W6DAS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Jim,
That solved the problem.
Thanks,
Dan
W6DAS
On 2/9/13 4:43 PM, Jim Sheldon w...@cox.net wrote:
Dan, you need to upgrade your K3 Utility program to the latest one -
1.12.10.10, and the current production release of the software is 4.60. The
FPF you have, 1.15 is still current but both
?
Dan
Houma
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
All prices include shipping within the United States via flat-rate priority
mail. I will consider shipping outside of the U.S., but I must add the
actual shipping costs.
Please contact me off the list at 2004goldw...@charter.net.
73,
Dan - K0ZL
Believe it or not, sales are pending on all items. Thanks for the quick
response!
Dan, K0ZL
Greetings, y'all;
Sold my K2, so I've got some kits and projects that I never got around to
doing that I'd like to sell:
Both of these are still new, unbuilt, and untouched, and still
P3
and K3.
May also want to revert to MCU 1.09 if that is available.
73
Dan
AC6DM
Paul,
On a whim I decided to load P3 FW 1.20 earlier this evening and note
that the span adjustment still is much slower than it was in 1.09. I'd
like to switch back, but I must have deleted 1.09. I don't see
Just gotta say thanks to Wayne, Eric and the whole crew. I ordered my
KX3 on the 7th, it came on the 13th ( from Cal to Louisiana. Not a short
trip! ) and its on the air from my work QTH. Gotta love it!
Thanks again and Merry Christmas to all
Dan AD5NW
KX3 3039
Houma La
is not what I want).
Does anyone know if such a command exists or can anyone help solve my
problem? I don't think I've seen this macro done before.
Of course a menu select in APF would eliminate this problem!
73,
Dan
__
Elecraft mailing
of 200 Hz
but not less. Parameters: Band 10 MHz CW main receiver, K3 F/W MCU
v04.51.
73,
Dan
W6DAS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Thanks
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
on Elecraft
site
I could not find any settings to correct this.
Any help would be appreciated
Tnx,
Dan
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Bill:
You can use the Flex Radio Flexknob with N4PY software as a remote POD for the
K3. Use it myself during contests.
73,
Dan
I would like to have a tuning know that I can drag around the desk.
Don't really know what it would be called, so I haven't tried a search.
I doubt
!
73,
Dan -- N3ND
Message: 29
Date: Sat, 28 Jul 2012 10:34:40 -0500
From: Jim Sheldonw...@cox.net
Subject: [Elecraft] Weird happening this morning
To: Elecraft Mailing Listelecraft@mailman.qth.net
Message-ID: 2012728103440.559905@home-5700c25bca
Content-Type: text/plain; charset=iso-8859-1
While
*
The P3 Utility can not connect to the P3 either. It attempts to connect
using different data rates but is unsuccessful.
Any ideas?
Dank0uif
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
http://earthfriendlysourcing.com/wp-content/plugins/extended-comment-options/likeit.php?plate138.gif
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
see I definatly need some degree of elmering with this so
please contact me off list and I will post a summation reply when I
get this ironed out and working
Hopefully you don't mind an on-list reply as I can imagine other folks
might've hit the same problem!
--
Dan Smith
www.danplanet.com
KK7DS
Will the KAT500 be on display at Orlando's Hamcation?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Issue has been resolved. After digging deeper into my settings I found that I
had somehow turned the bias on. Upon turning this off and setting the mic
gain to High I immediately had what appears to be normal ALC indication. I
suspect this happens when you operate mostly CW and data modes...
Have a two year old K3, latest firmware installed. I have noticed for some
time that the ALC reading during SSB operations does not sho any bars at
all. My Mic Gain is set to about 20, Compression to 25 and I receive good
audio reports. There is however no ALC indication. Any help woulw be
Funny real funny :
Dan - KI4YZE
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of george fritkin
Sent: Wednesday, February 01, 2012 12:16 AM
To: Ele Elecraft
Subject: [Elecraft] KX3
It was 4:30 in the afternoon when I heard
http://mutron.nl/catalog/friends.php?carry138.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
sorry folks... dont know what happened but somehow a spam got originated at my
station.
I didnt send it! maybe a worm got into my mac. I gotta check this thin out...
tks
73
DANNO
Hard work pays off in the future, but laziness pays off now.
shaking your heads! IS IT POSSIBLE that the rig
was actually transmitting on the VFO A freq instead of the VFO B freq
regardless of the indications on the rig and P3?
What is going on? This is, indeed, very strange. I am also using a
KPA500 for what it's worth.
Dan -- N3ND
In my dreams sigh
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
How about a little atomic paint like they used to put on the wrist watch
hands that glows alien green in the dark?
Dan - KI4YZE
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Andrew Faber
Sent: Friday, January 20, 2012 5
My K2/100 has stopped modulating. I left home this winter without the manual.
I'm afraid my monkeying with the various menu settings may have disabled
something. I wonder if someone may have a fix. Is there a reset. It works
fine in CW mode.
73
DANNO
Hard work pays off in the future, but
I'm trying to use the K24U software to operate my K2/100 and having problems
getting connected. Im using an older DELL Inspiron/5100 w/XP Pro. When I
click Connect... I get a window that sez K2 communication Link Has Been
Reset. I click OK but get no joy. When I try to choose a
I think I read somewhere that the KX3 is/will be Bluetooth capable -
will there be recognition/provision of/for a wireless mini keyboard or
will there be some other way to plug a keyboard directly into the KX3?
Dan - KI4YZE
__
Elecraft
You should visit this site immediately!..
http://mescla.free.fr/go.site.page.php?mjhid_friend=36qj0
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
My email has been hijacked. I have taken, I think, all precautions to
keep this from recurring.
Sorry!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Just as a follow-up, I performed the K2 Dial Calibration as directed on
Don's website and had fantastic success. Thank you!
Dan
On Wed, Nov 23, 2011 at 3:58 PM, Don Wilhelm w3...@embarqmail.com wrote:
Dan,
Don't worry about getting the 4 MHz reference exactly to 4 MHz
to look or how I may address this
problem?
Thanks!
Dan, NØDA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
and 73,
Dan Sherwood
WA6PZK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
They were about 3 kHz apart. Also I tested XIT and RIT. As soon as those are
enabled delta-f should lite up when the encoder is moved. It didnt. It seemed
to be a software glitch which cleared with a power cycling.
If it happens again I will contact tech support.
Tnx
From the IPhone of
Dan
to your door in the US.
Thanks much
Dan - KI4YZE
Cellphone = 770-377-6000
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
The K2 and the KIO2 have been sold pending funds - thanks to all who
responded.
Dan - KI4YZE
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dan Boardman
Sent: Saturday, November 12, 2011 10:03 AM
To: elecraft
to be switching back and forth.
My copy on receive is as good as ever, just transmit. I¹m thinking there¹s
some kind of DSP issue going on here, even though compression is at 0.
Any ideas?
Thanks
Dan Sherwood
AFA9LV / WA6PZK
sending IM on the paddles in real time seems to work.
Thanks,
Dan
WA6PZK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
and cntl-T.
Neither works. Only sending IM on the paddles in real time seems to work.
Thanks,
Dan
WA6PZK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
internally to the case.
Should I allow some space for cooling there?
Any ideas?
73,
Dan Sherwood
WA6PZK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
. With all the
AGC pumping going on is when I had these problems. Have the K3/P3 running
all morning w/o HRD. No problems.
I'm looking at the LP bridge website now. Thanks for the suggestion.
73,
Dan
WA6PZK
On 10/8/11 6:29 AM, Joe Subich, W4TV li...@subich.com wrote:
At the time, the P3
¹s rig
display.
I¹d pay good money to someone who makes HRD work properly as I really like
the interface for casual DX logging.
Thanks for the input.
73,
Dan
WA6PZK
On 10/8/11 9:56 AM, David Inger ingerassocia...@verizon.net wrote:
Hi Dan,
I see you have received several responses
the good work!
From the IPhone of
Dan Sherwood
WA6PZK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
I broke in my brand new K3 running multi single Ventura County, under the call
KG6TBR. We all pounded it good and it held up well. Good stuff!
From the IPhone of
Dan Sherwood
WA6PZK
On Oct 3, 2011, at 7:47 AM, Dale Putnam daleput...@hotmail.com wrote:
Well, now, with the CA qp, over... one
, (or elsewhere), with an in-depth explanation of what the various
settings do.
73,
Dan
WA6PZK
On 9/29/11 8:51 PM, Don Wilhelm w3...@embarqmail.com wrote:
The K3 noise blanker, and in fact any noise blanker works by producing
holes in the receive path. That is what blanking means - if an
impulse
point-to-point connectors. Replaced many a tube socket in amps
on account if it, when things start getting loose.
73,
Dan
WA6PZK
On 9/27/11 7:07 PM, Steve Kercel aa4a...@gmail.com wrote:
Use the Deoxit, but not the gold, to clean up old pots. It does an
amazing job. I've used it on carbon pots
Is this stuff good for quieting scratchy potentiometers? I gather from
reading these posts it is good for contacts and antennas. Not sure if it's
safe for carbon pots. I'm cleaning up my trusty old TS-940 for resale. New
K3 took its place.
73,
Dan WA6PZK
-- Forwarded Message
From: Paul
was an indication I was tapped too low for
the high mains voltage but the 80V to 64V range is well within spec so I
assumed I was ok to leave it that way. Still seems odd that I have to tap
down when I'm so close to the max input voltage.
Dan
AE9K
--
View this message in context:
http://elecraft.365791.n2
I would only add that on the KPA500, make sure AUXBUS is ON. Bandswitching
works with it off but the STBY/OPER power level tracking and the KPA500
status messages in the K3's VFO B display don't.
Dan
AE9K
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Setting-K3-Power
. Is it really necessary?
3. If there are benefits, in what order should they be chained.
4. Then, what are the benefits?
Reason I ask, I just did the following chain things are not working
correctly. Serial port - P3 - KPA500 - K3.
Obviously, I am missing something.
Thanks,
Dan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I keep having problems with my KAT3 finding a match. It always appears
to be an issue that swapping the capacitance between the transmitter
side and antenna side resolves the problem. In other words. when I
can't get the correct match, I swap the capacitor position (using the
configuration
I just have to mention this.
The CW QRQ is just unbelievable. It's like the K3 never goes into TX --
or the RX never turns off. A real miracle of a job well done.
Dan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Where can I get the details on the 100 watt amp for the KX3 - specs -
price - etc.? How does it compare size wise - price wise to the JUMA
100??
Thanks
Dan - KI4YZE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
error. Since the FMT pursuit is
occasional, I don't want to invest too much to get the desired result since
I still have to obtain a Trimble Thunderbolt or similar GPSDO 10 MHz
reference.
Thanks again.
Dan
AE9K
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Installed
. This would make the case for replacing the native oscillator with the
K3TCXO3.
If the stability is measured over time, however, then the K3EXREF and native
oscillator would appear to be sufficient since oscillator drift is
insignificant in the 4 to 8 second time span.
Just curious.
Dan
AE9K
--
View
of magnitude in their
error, does that error make a difference when the K3EXREF adjustments are
every four seconds?
ps - During your beta testing were you using the standard K3 5 ppm
oscillator or the KTCXO3 0.5 ppm oscillator? I didn't find mention of that
on your web site.
Dan
AE9K
--
View this message
that both affect the same VFO
to play nice from one macro?
Dan
AE9K
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I too am very interested. I was just about to place an order when we
got the bad news. I hope that the business is restored to operation at
some point.
73,
Dan - W4TQ
.
On Thu, Apr 28, 2011 at 8:26 AM, Bert Craig wa...@arrl.net wrote:
Wow
Hi Mike,
I saw this post from Hector a few days ago. It looks like he's moved
up from a K3 to a Flex 5000A (just kidding).
73,
Dan - W4TQ
(Flex owner--previous K3 owner)
...
a...@comcast.net
to FlexRadio
show details Apr 25
First, thanks to Wayne, Don, Bruce, and Jeff, for your helpful notes and
answers to yesterdays inquiries. *I was afraid those answers would actually be
pretty much set in software and or stone, but I can dream can't I?
At any rate, thanks for a great product and group.
*Question, is there room
Has anyone discovered a frequency where the T1 _Always gives CW readout
information, _Regardless of what freq is matched with it?
Thanks, Danny Dyer, Wb4idu.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Could the T1 be modified to give CW read out of last freq matched by it?
Thanks, Danny Dyer, Wb4idu.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
This lifetime blind, longtime ham, is preparing to use his T1 Tuner with his
Yaesu FT817ND, and wonders,
Is there a best HF or 6M frequency
where CW Info Output is Always heard ,
_regardless of the transmit frequency being matched?
If So, a home channel could be set for the best HF, and 6M
This lifetime blind, longtime ham, is preparing to use his T1 Tuner,
with his Yaesu FT817ND.
***Since the T1 already provides necessary info
via Transmitted CW read out,
And CW Freq read out is
already included in the KX1 and other Elecraft Products,
Could the Freq read out, of the frequency
This lifetime blind, longtime ham, is preparing to use his T1 Tuner,
with his Yaesu FT817ND.
***Since the T1 already provides necessary info
via Transmitted CW read out,
And CW Freq read out is
already included in the KX1 and other Elecraft Products,
Could the Freq read out, of the frequency
Two things.
1. I owned an FT-2000. What a waste of a radio.
2. Peer pressure! Now I owe so many!
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
, YMMV. If you want a PDF of the instructions I've created for
others, please respond direct.
73,
Dan -- N3ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
PSK is a low power mode- 40-45 watts is overkill to say the least -
20-25 is even strong. QRPers run 5 watts or less quite successfully with
PSK.
Dan - KI4YZE
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ik1bxn
Sent
Wonder if by chance anyone may have an unbuilt T1 Antenna Tuner tucked
away they aren't going to build - if so I'm looking for one.
Please contact me off list
Dan - KI4YZE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
If you have one for sale I'm looking for one - please contact directly.
Thanks Much
Dan - KI4YZE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
201 - 300 of 791 matches
Mail list logo
