I loaned my KPSK2 (er, ah KSB2) to a fellow ham.
Any Spur or other oddness from just sticking C167 into j11? It'll only be
there a week or two.
Dan / WG4S / K2 #2456
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
Elecraft # 4775 is in the process of being built. First HF radio for me,
looking forward to the fun.
73's
Dan KD7ZFV
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
A question on Toroid's.
I am about to start mounting toroid's on the RF board. The question is:
Do I mount them flush to the board or raise them up, if raised up, all of them
or only certain ones?
73's
Dan KD7ZFV
___
Elecraft mailing list
Post
Thanks to all who responded to my question on toroid's, all have helped.
73's
Dan KD7ZFV
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Several have emailed me requesting the answer to my previous question on how
the toroid's should be mounted, so here goes.
With the exception of T2 on the RF board, which should be 1/16 of an inch off
the board, the rest should be flushed mounted as tight as possible.
73's
Dan KD7ZFV
Thanks
No argument here. Spending $45 to protect your $1,000-plus investment makes
good sense to me. If it helps you avoid the aggravation and time spent
replacing one blown IC, the money is well-spent.
73!
Dan KB6NU
---
President
even know how to tell how poorly.
Dan sold the Lollipop Barker / WG4S / K2 #2456
snip
I would get rid of that mike thingy and spring for a nice set of paddles ;)
Kevin. KD5ONS
/snip
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
Local to where?
Dan / WG4S / K2 #2456 with KDSP2 er, ahhh , that microphone thingy.
snipJust wanted to get reports of how my SSB board in my K2 sounds./snip
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Why wait?
Dan / WG4S / K2 #2456
snipAfter all, we have the schematics (er, or I will once I order my new
K2! :)/snip
http://elecraft.com/manual/K2_AppF.pdf, starts on page 138.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
In addition to having an Ultimatic keying option, the N0XAS PicoKeyer
(www.hamgadgets.com) also has a bug emulator mode.
73, Dan KB6NU
- Original Message -
From: Ron D'Eau Claire [EMAIL PROTECTED]
To: 'Elecraft Discussion List' elecraft@mailman.qth.net
Sent: Sunday, February 20, 2005 1
for the X then for the K.
Another keyer that now supports Ultimatic keying is the N0XAS PicoKeyer
(www.hamgadgets.com). It's only $18, and fits in a mini Altoids tin. I have
no affiliation with the company; I just think it's a cool little keyer.
73!
Dan KB6NU
. I
think it is well worth $25!
Dan Allen
KB4ZVM
K2 S/N 1757
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
0.1%. For a few dollars more, he will use a chip that doubles that
accuracy.
I ordered the basic model to test and/or calibrate my used HP 3466A. I will
put out a report on how I like it when it gets here!
Dan Allen
KB4ZVM
K2 S/N 1757
___
Elecraft
it's for folks not in the
contest or does it mean Please use 1830-1835 to make CQ WW 160 CW contacts
with another continent?
Dan not much of a contester Barker / WG4S / K2 #2456 / tu om 599GA test
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
) and PTT are
the same line.
Dan / WG4S / K2 #2456
snip
Subject: Two radios one key
/snip
Summary, Don't.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
Elecraft (WASVE - pronounced waves - AND
doesn't violate the NASA rule, as NASA itself does).
Dan / WG4S (NASA compliant callsign AND Name AND serial number) / K2 #2456
snip
WAERIAS, pronounced WEAR-ee-ass (Acronyms at NASA had to be
pronouncable, and generally typable with the fingers of one hand
they're quite comfortable. I can wear them for hours during a contest.
73!
Dan KB6NU
---
President, ARROW Comm. Assn. (www.w8pgw.org)
ARRL MI Section Affiliated Club Coordinator
CW Geek (FISTS #9342)
Read my ham radio blog
Move your power supply about 2 feet Northwest.
Dan / WG4S / K2 #2456
ps: Actually, the direction might need to be Eastg
snip
on cw the note tone 1. terrible clicks and signal just buzz buzz buzz.
/snip
___
Elecraft mailing list
Post to: Elecraft
There was a great little $35 tempraturn controlled iron on the reflector
about 2 months ago. Santa brought me one and it's fine. I run it at 700
degrees F. Any hotter is very dangerous. Get one. If you can't find it, let
me know and I'll research the Archives for you.
Dan / WG4S / K2 #2456
I
pricey,
but I am still tempted!
Dan Allen
KB4ZVM
K2 S/N 1757
- Original Message -
From: Jim Wiley [EMAIL PROTECTED]
To: Robert Rennard [EMAIL PROTECTED]
Cc: Elecraft Reflector elecraft@mailman.qth.net
Sent: Sunday, January 09, 2005 12:39 AM
Subject: Re: [Elecraft] Atomic Clocks
GEORGIA. Use the web, Luke!
Dan / WG4S / K2 #2456
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Until 1/5/05, you can get a Dell SC420, 2.5GHz Celeron, 1G Ram, 80G
Harddrive, CD-Rom for $234.
I just ordered 4!
Dan / WG4S / K2 #2456
No affiliation, blah, blah, blah, I just lost 3 servers over the weekend and
I'm OUT of spares and very nervous
for you, but you can drill in as above.
http://configure.us.dell.com/dellstore/config.aspx?c=uscs=04kc=6W300l=en;
oc=sc420sapps=bsd
They are kind of high for disks, but the memory is decent.
Dan
-Original Message-
From: NZ8J [mailto:[EMAIL PROTECTED]
Sent: Monday, January 03, 2005 5:55 PM
It says to linearize with the rig on 40 meters. What it doesn't say is that
40 meters needs to be workingg. As your VCO voltage reading on 40 meters
is broke, so will be the linearization.
You've got to get the VCO working first, I imagine.
Dan / WG4S / K2 #2456
snip
BandLow Freq
Menu, ST-L (Sidetone Level).
Adjust at will (Pitch too!).
Enjoy the new rig!
Dan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of William E.
Twaddell
Sent: Thursday, December 30, 2004 4:19 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] CW sound level
for that feature. Bleah.
73!
Dan KB6NU
---
President, ARROW Comm. Assn. (www.w8pgw.org)
ARRL MI Section Affiliated Club Coordinator
CW Geek (FISTS #9342)
Read my ham radio blog at www.blurty.com/~kb6nu
- Original Message -
From
to fail until I noticed that the meter would start acting funny whenever one
of the other stations was transmitting! :) Everyone got a good laugh out of
it.
73!
Dan KB6NU
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Tuesday, December
Ever heard of a touch screen?
Dan / WG4S / K2 #2456
snip
The 'panel' can be as large as your computer screen.
Apologies to those who really want to press 'real' buttons (and that
includes me - I am quite hardware oriented.
/snip
___
Elecraft mailing
Maybe someone could convince TenTec to release the firmware as open source,
and allow amateurs to experiment with the radio. Just a thought...
73!
Dan KB6NU
---
President, ARROW Comm. Assn. (www.w8pgw.org)
ARRL MI Section
dipole, but I'm not certain. Serious
QSB. It's often non-symetric. I hear Kevin better than he hears me, or vice
versa, or worse.
40 often works better, later - At least here in extreme Northwest Georgia.
Dan / WG4S / K2 #2456
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Larry, I received the award today. Thanks.
One question, Why is there a Conferate States of America Stars and Bars
emblem at the bottom? I believe the North wong.
Dan / WG4S / K2 #2456
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Larry Makoski W2LJ
Sent
Thanks! That's nice looking. I was imagining something sticking out the side
(Who would need two!). Those stick out the front and make mucho sense.
Dan / WG4S / K2 #2456
ref: http://www.visioncomm.net/images/handles.jpg
Vic sends: Here is a picture of my K2 with the side panels made by Randy
Evidently the wattmeter is not a problem. The KAT2's power meter seems fine
(eg, believable). I checked with a 200MHz bandwidth scope and the results
are shown below. I'll dig around the transformers a bit. What's the current
thinking on the 160 inefficiency?
Dan / WG4S / K2 #2456
K4ZM sez:
snip
Hey, let's find him. If every Kn owner builds a small 3 element yagi for DF
and sends the bearing of the null to the list, and their location, we'll
have good data. Let's see ... 3700 kcps, director size ... , reflector size
Is that a large antenna?
g
Dan / WG4S / K2 #2456
snip
Check out
0123456789 to CWGet without any errors or spaces, you've done something.
That's almost as hard as sending a paragraph!
I used to consistently sign DEW G4S until I started watching my sessions
on the laptop. Now I sign DE WG4S. It's got to be easier on the other guy!
Dan / WG4S / K2 #2456
Bob
Someone might also want to alert the IARU Region 2 Monitoring System
(http://www.storm.ca/~iarumsr2/). I'm sure they'd be interested in this, if
they don't already know about it.
73!
Dan KB6NU
---
President, ARROW Comm. Assn
what I know.
One might say these two guys deserved each otherg.
Dan / WG4S / K2 #2456
snip
Have you ever heard the 'banana boat swing? ...
Or the 'Lake Erie swing'
/snip
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
Well, it's not audible here (Extreme Northwest Georgia) now (1800Z). It was
very readable (tho not overly strong) early this morning (1200Z).
Dan / WG4S / K2 #2456
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ron D'Eau Claire
Sent: Tuesday, December 21
to the above mentioned
self-imposed 5 watt limit.
Any ideas out there?
Dan / WG4S / K2 #2456
Raw data (Power from the KAT2 in CALP mode, Heathkit Cantenna). Power: Car
battery on 16 guage wire (My bench supply peaks at 3A).
kkcps Pout (max CW)
1.89.9 (High-current annunciator, CAL Cur at 4.0
the firmware got lost, at some point, and toggling Po28 fixed it. Now the
display is believable, and I've got a couple transformers to inspect for the
low power out on the higher bands.
Very interesting result.
Dan
k4zm sez:
snip
In your Secondard Menu of the firmware there is a setting called Po28
is a terrible
thing.
Dan / WG4S / K2 #2456
snip I wish there was a K2 button you could push to see what filter is active.
/snip
Sent via the WebMail system at visioncomm.net
Are you sure the shoulder washers are upside right? The shoulders hold the
tab and the turned-down part goes through the tabs.
Dan / WG4S / K2 #2456
snipNO way I can secure the heat sink cover./snip
___
Elecraft mailing list
Post to: Elecraft
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Larry Makoski W2LJ
Sent: Saturday, December 18, 2004 7:33 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Ain't there no ragchewin' goin' on?
There has been a drought in the number of Elecraft
ragchewin' going on, just not getting sent to you!
Dan / WG4S / K2 #2456
snip
There has been a drought in the number of Elecraft Ragchewer's Awards
that have been coming in. It seems that not many of you are getting on
the air with your KX1s, K1s, K2s and K2/100s and spending some time
heating up
Hertz's is kinda like cycles. When you hear 4 MHz, think 4000 KCS.
Dan / WG4S / K2 #2456
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Larry Phipps
Sent: Thursday, December 16, 2004 1:49 PM
Cc: 'Elecraft@Mailman.Qth.Net'
Subject: Re: [Elecraft] Puffing
Try http://www.expresspcb.com/news.htm.
They'll even build the boards for you!
Dan / WG4S / K2 #2456
I need to produce a couple of quality schematics. Anyone know of a
freebie CAD program to do this.
___
Elecraft mailing list
Post to: Elecraft
Old link. sri om.
try: http://www.expresspcb.com
-Original Message-
Try http://www.expresspcb.com/news.htm.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
-Original Message-
From: W3FPR - Don Wilhelm [mailto:[EMAIL PROTECTED]
Sent: Tuesday, December 07, 2004 3:50 PM
To: Dan Barker
Subject: Re: Discrete Passband Tuning Revisited
Dan,
I must disagree - you must have a very good K2 CW filter - don't change
it.
I won't
not near the input pitch will attenuate (by design)
greatly.
Dan / WG4S / K2 #2456
snip
W3FPR - Don Wilhelm
... allow better rejection than a narrower filiter and avoid the attenuation
that occurs with very narrow filters.
/snip
___
Elecraft mailing list
I can host photos for list members. Just email me directly the photo, and
it'll soon be available at http://www.visioncomm.net/images/yourPhotoName.
Dan / WG4S / K2 #2456
PS: We also host the ECN website.
snip
I sent Stewart a photo of what I did. I can send it to others, but I don't
think
to run. Even if I
run in QRP mode, with the PA OFF, the fan is still running on high
Thx
K5GUS
Dan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
or any disassembly/tracing.
Dan / WG4S / K2 #2456
I a message dated 30/11/04 02:01:23 GMT Standard Time, [EMAIL PROTECTED]
writes:
snip
What is the absolute highest safe voltage you can pump into the K2 before
you start overheating the regulators etc?
/snip
Does A4 mean 14 in Spanish? I hear Zones of A4 from EA7 stations. My map
says 14 but my Español es muy stinko.
Dan / WG4S / K2 #2456
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
have been inserted
in the correct location.
Wouldn't you feel silly removing the wrong part because of the manual,
only to find in troubleshooting that the part had been replaced (or even
removed - C180 on the RF board is no longer used) in a note you didn't have!
hth
Dan / WG4S / K2 #2456
a space between DE and WG4S. Well, now there is.
Sending 01234567890 on the straight key with no extra spaces was a good
exercise too! Took a while to get that right (actually, it took a while on
the paddles too!).
Dan / WG4S / K2 #2456
-Original Message-
From: [EMAIL PROTECTED]
[mailto
in the flatness department.
Dan / WG4S / K2 #2456
Bob (G3VVT) sez:
The option of OP1 or 2.2, etc in the filter selection is for receive only.
snip
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
an SGC-230 autotuner (a really
old one).
Now I am looking for Delaware, Hawaii, Montana, and Wyoming! Hawaii is
going to be the hard one from here in South Carolina. I hope I don't have to
wait on the sunspot cycle for that one!
Dan Allen
KB4ZVM
K2 S/N 1757
- Original Message -
From
You should have been on ECN last week. There was a KX1 very decent signal
from HI here on Lookout Mountain (GA/AL/TN) border. In fact, AH6RE was
louder than Net Control!
Dan / WG4S / K2 #2456
snip
Hawaii is going to be the hard one from here in South Carolina.
/snip
Greek comment.
Dan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Didn't you hear about the solar flare? An X-22 on a scale that only goes to
20! That's GOT to be it.
Dan / WG4S / K2 #2456
snip
[what may] I have missed that could account for this?
/snip
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
when running without the KPA100.
At the same power setting I get at least 10w out on all the other bands,
including 160.
Thx
K5GUS
Dan Schieler
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
Er, ah, I wasn't aware the K2 made any objectionable noise. What's your
specific issue?
Dan / WG4S / K2 #2456
snip
Has anyone come up with a mod that reduces phase noise on the K2? Thanks,
Bob
/snip
___
Elecraft mailing list
Post to: Elecraft
has a clue (I sure
don't) and a while to spend. We can move the bfo's around, or maybe even
definitively say my mic element sucks. Another choice (getting more
attractive all the time) is stay under 7150 Kcs.
Dan / WG4S / K2 #2456
Extreme Northwest Georgia
to 2.2, but
there must have been a firmware upgrade or a reset somewhere in the last 2
years.
Live and learn, and again - Thanks Jim.
Dan / WG4S / K2 #2456
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
program so I would most likely do the dual uart cable I've seen
from the KPA100.
Appreciate the feedback.
73
K5GUS
Dan Schieler
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
on schematics and placement diagrams!
Dan / WG4S / K2 #2456
ps: To find R22 on the CB placement diagram, you must search for D3! The
silk-screened label is on the board AND diagram, but the side-tone is far
nicer sounding with D3 gone and R22 (plus a couple other parts) there.
-Original Message
Question about transmitter drive setup.
I'm about to go on the air with the K2 Power knob full clockwise, and the
soundcard drive (Digipan) set for about 1A draw on key down. Is that right?
Dan / WG4S / K2 #2456 with KPSK2, er, ah KSB2
___
Elecraft
. I must have known that because I said it wouldn't work for CW,
but I just had to try.
Thanks anyhow.
Dan
-Original Message-
From: John Magliacane [mailto:[EMAIL PROTECTED]
Sent: Friday, November 12, 2004 10:22 AM
To: Dan Barker; Elecraft
Subject: Re: FW: [Elecraft] How to set up SSB
with the
radio and I'd like to reduce the weight by not carrying the battery all
the time. Any suggestions? Has anyone tried the MFJ4103? I can't tell
from the picture if it uses a 3 prong grounded AC plug or not, perhaps
that would indicate some better grounding in the design..
73,
K5GUS
Dan
that.
Thanks for the voltages. Now I know the old element was toast.
Dan
-Original Message-
From: Gary Surrency [mailto:[EMAIL PROTECTED]
Sent: Thursday, November 11, 2004 11:56 AM
To: 'Dan Barker'
Cc: 'CSinfo'
Subject: WG4S: RE: [Elecraft] Anyone know how an MH2 works?
Hi Dan,
You
could find in the archives is http://www.smeter.net/ and
it's off the air.
Dan / WG4S / K2 #2456
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
to be a dead short. Is that right?
Millampmeter inline with a 11K pull-up and a 9v battery shows .7 ma. Is that
right?
Oh, yes. Whistling into it makes no wiggles on the o'scope.
Dan / WG4S / K2 #2456
___
Elecraft mailing list
Post to: Elecraft
I don't know is the degree of
accuracy I should expect from the indicated power.
Anyway, do I have a problem or what? Any and all help is and will be deeply
appreciated. Thanks in advance!
Dan, N4FYS
K2 # 4473
___
Elecraft mailing list
Post
800Hz or so.what have I missed?
Thx
K5GUS
Dan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
I just built s/n 4426 and it had the Motorola blue colored MPS5179 which
caused my freq counter not to work. Gary at Elecraft quickly identified
my problem when I told him I couldn't get a reading out of TP1 with the
internal freq counter. I was promptly sent replacements and all was FB.
I was
or more and they have a temp controlled iron
for $36), a good pair of flush cutting nippers and above all a good lighted
magnifier and join the fun. I don't think you'll ever regret it.
Thanks Elecraft and Thank You Christina, you did a great job packing K2 4473.
Dan, N4FYS
K2 # 4473
Don't think of it as pushing two buttons together. Put your finger between
the buttons, and push it as one. It's easy (for us southpaws, anyhow).
Dan / WG4S / K2 #2456
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, October
a graphite rod with a wire
line, and ground plane would be great as I'm in the water already.
Rig the KX1 to my vest...casting for the 'big ones' :) Hey
Eric-wouldn't that make a nice ad? :)
--
Dan Presley-N7CQR-Portland, Or QRP-L #502 ARS #71
[EMAIL PROTECTED
book.
I think you would be happy with it.
Dan Allen
KB4ZVM
K2 S/N 1757
- Original Message -
From: jim danehy [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Saturday, September 25, 2004 10:25 AM
Subject: [Elecraft] recommended switching supply
I want to purchase a switching supply
cables, jumpers, connectors and testing
location.
Let us know what you find.
Dan / WG4S / K2 #2456
snip
it may be as high as 4:1 on some bands even when the tuner says it is flat
or near flat.
/snip
___
Elecraft mailing list
Post to: Elecraft
!
Dan / WG4S / K2 #2456
k6xr Sent: Thursday, September 16, 2004 2:44 PM
Hello Dan and thanks for your thoughts.
I installed both the 570 and the k2/qrp and k2/100 on a astron AS35a power
supply.
I connected a voltmeter across the power supply terminals and keyed each rig
on 20 meters at 1.0.1
Just had to pass on that I was able to get out in the sunshine in
Oregon for the Labor day Spartan Sprint with the KX1. The weather was
perfect, and conditions on 20 weren't too bad. I was able to work
cross country (MD,VA,NJ,NY) as well as the usual stuff from the west
coast with just the
A Power supply drop-out can cause that. Did the LCD say Elecraft for a
moment after it happens?
Dan / WG4S / K2 #2456
snip
occasionally with drop out on TX. I key up and the K2 just seems to
drop out, /snip
___
Elecraft mailing list
Post
I was going for End Fed Half Wave A...
But then I got stuck! Aerial maybe?
Dan / WG4S / K2 #2456
snip
Thats easy Jim, its in Slobodian and means a dipole.
/snip
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
That's embarrassing. I was looking for a word that started with A, and
meant Antenna, and Aerial was the best word I could find. I don't feel old,
I'm only 50, but things are slipping.
Dan / WG4S / K2 #2456
snip
EFHWA - End Fed Half Wave Antenna
/snip
squeezed the wires inside down as close to the PC board as they can be, but
that didn't help. The right side of the paddle is working fine. Anyone have
any other suggestions??
Thanks, Dan W1RDB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
Sounds like time for an antenna to me.
Dan / WG4S / K2 [EMAIL PROTECTED]
snip
OK, time for the add-ons: 60M, 160M, SSB, NB, and the KPA100.
/snip
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
.
73,
Dan KB6NU
- Original Message -
From: [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Friday, July 16, 2004 11:17 AM
Subject: [Elecraft] Your favorite bands
It's been a while since I sent out a general question like this: What
is/are your favorite band(s) and why? Let's
It's on the web. http://www.arrl.org/members-only/prodrev/pdf/pr0408.pdf
Dan / WG4S / K2 #2456
snip
I haven't seen my QST yet. But I'll be looking for it
/snip
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
I haven't heard one, but looking at the report, it appears they need to do
some work on the CW keying shape. Looks rather clicky to me!
snip
It's on the web. http://www.arrl.org/members-only/prodrev/pdf/pr0408.pdf
/snip
___
Elecraft mailing list
Post
I just fired off a bunch of tripple-gallon (15 W) dits on 3505. No echos
heard from Northwest Georgia.
Anyone else hear it? Let's see if it's localized. I'm at N 34 54 22 W 85 26
21.
Dan / WG4S / K2 #2456
snip
I can hear it all the time now on 80m, at least for the past three days.
/snip
701 - 791 of 791 matches
Mail list logo
