I use a Genovation Keypad to fire macros at the rig, and one of them is
a power setting macro. I would imagine you could use a FN key on the
P3/SVGA if you have one.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW
/21 12:52 PM, Dave Cole wrote:
Hi,
I have an almost mint KX1, (recently back from service and checkup, with
paperwork indicating all is well with the unit, and it meeting specs),
which I am looking to trade for a almost mint condition W2 Wattmeter,
with one HF 2K coupler, (DCHF-2000), and one
Hi,
I have an almost mint KX1, (recently back from service and checkup, with
paperwork indicating all is well with the unit, and it meeting specs),
which I am looking to trade for a almost mint condition W2 Wattmeter,
with one HF 2K coupler, (DCHF-2000), and one VHF 200 W coupler,
I used a Genovation external key pad to fire macros at things K3
related... That way I don't need a software package to fire the macros
off...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical
I do about the same, I feed the headset from the rear of the K3.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 5/11/21 11:47 AM, Jim McDonald wrote:
To reduced wear on the
Why not use a metal cap from American Radio Supply? See:
https://www.americanradiosupply.com/microphone-connector-cap-dust-cover-most-all-ham-radio-transceivers/
fits the mic connector on the front of the rig.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL
An interesting story from OPB dealing with the global shortage of chips...
https://www.opb.org/article/2021/04/29/it-s-not-just-cars-ipads-and-macs-suffer-from-semiconductor-crunch/
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL
Or use a tinySA, and take a look at entire bands at one time... I have
found that the tinySA is a real assist in correlating RFI sources. See:
https://www.nk7z.net/
to get to my base page, or
https://www.nk7z.net/tinysa/
to go directly to the article.
At the end of the tinySA article is a
R
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 4/24/21 4:20 PM, Julia Tuttle wrote:
Q
On Sat, Apr 24, 2021 at 7:20 PM Sid Frissell wrote:
Sent From Sid Frissell's iPad
the pliers.
All Hail Marx and Lennon
73, Kevin. KD5ONS
On 4/22/21 11:46 AM, Ken Widelitz wrote:
Wow, lots of Bozos on the Elecraft buss. I'm still waiting for the K4
electrician to build mine.
73, Ken, K6LA / VY2TT
On Thu, Apr 22, 2021 at 11:41 AM Dave Cole wrote:
Do you live in an award
Do you live in an award winning communications trailer? Can you jump
the hole to the center of the Earth? Is your first name Nick? Do you
know the Lonesome Beet? If so, then you might be a Bozo...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical
Hi Ben,
Thank you for the information!!! I will look to see if that cap is wrong!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 4/12/21 3:37 PM, w4sc wrote:
I had a similar
In my case, I use the K3 power switch to shut down the station rig and
P3. Thanks!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 4/12/21 11:55 AM, Bob McGraw K4TAX wrote:
I’ve
the problem. I sent it to Elecraft and it turned out that
the I/O board was faulty. The repair cost was approximately $200 for a new
board and labor.
73
Howard/WX7HS
On Apr 12, 2021, at 06:05, Dave Cole wrote:
Rick,
Thank you! I appreciate the datapoint in this. I was just looking over
that helps,
-- Dave, N8SBE
Quoting Dave Cole :
Rick,
A further thought on this... Next time your P3 fails, can you try and
grab an image from it using the utility? I just thought of that, mine
will not grab an image, when it is failed, so it is probably not the
backlight on mine.
73
Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 4/12/21 6:03 AM, Dave Cole wrote:
Rick,
Thank you! I appreciate the datapoint in this. I was just looking over
the schematic and came to the same conclusion... It looks like a
backlight
Rick,
Thank you! I appreciate the datapoint in this. I was just looking over
the schematic and came to the same conclusion... It looks like a
backlight problem to me as well... I tried to find a datasheet on teh
4538 IC that appears to control it, but alas, nope. I got mine to come
back
.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 4/12/21 4:27 AM, Dave Cole wrote:
Hello,
My P3 seems to have had a display failure. The SVGA is working, as I
can control the K3 via
Hello,
My P3 seems to have had a display failure. The SVGA is working, as I
can control the K3 via macros fired at it via the keyboard input. It
failed to light off once before, but that seemed a one off thing, not it
seems permanent.
Has anyone seen this before? If so, what was the
Looking for a SP3, please email me cost, and condition. I will pay
shipping and insurance to my home.
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
, Dave Cole wrote:
Was that the Hutch Mountain conversion Jim?
Yes. And Glen said they were great to deal with, including answering
questions. Thanks for prodding my aging memory cells.
73, Jim
__
Elecraft mailing list
Home: http
Was that the Hutch Mountain conversion Jim?
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 4/10/21 4:43 PM, Jim Brown wrote:
On 4/10/2021 3:01 PM, Gary Memory wrote:
Anybody know,
Here is another data point on this issue:
https://www.thestreet.com/investing/chip-prices-spiking-high-demand-and-supply-chain-disruptions
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical
I am looking for used, but working, DCHF-2000 power coupler for the W2
wattmeter, 0-2000 watts.
If you have one for sale, please write me OFF LIST, with condition, and
price. I will pay insured shipping from your CONUS location to my home.
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
Hello,
I am looking for a used DCHF-2000A power sensor by Elecraft. If you
have one that is working, please email me with condition, and price. I
will pay shipping.
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst.
craft-boun...@mailman.qth.net On
Behalf Of Dave Cole
Sent: Monday, March 29, 2021 10:43 PMTo: Brian Hunt
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Inventorying a K3/P3
Hi Brian,
Thank you for the suggestions, and the tidbits of the additional steps for add
on items like new synth
That is a hell of a good idea!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 3/30/21 6:35 AM, Geert Jan de Groot wrote:
Hi,
First off, sorry for your loss.
As to options, and
Keith,
First off, thank you very much for the reply! I do appreciate it greatly!
That is the info I needed! I now know the menus will give me most of
what I need. As far as I know the radio has not been reset, nor has
anyone been in it! That makes things a lot simpler! I do thank you
Hi Brian,
Thank you for the suggestions, and the tidbits of the additional steps
for add on items like new synths, etc. I have saved your email.
I have sent Elecraft three seperate email requests across three weeks,
and gotten precisely zero replies from supp...@elecraft.com address...
installed
other than pulling the cover to see. There are two programs that may
help: The Elecraft K3 Utility program and K3_EZ:
https://groups.io/g/Elecraft-K3/files/K3_EZ
-de John NI0K
Dave Cole wrote on 3/29/2021 12:18 PM:
Hi,
I am about to take a look at a K3 which a SK estate has asked
or another reflector I
subscribe to.
There isn't a very good way to properly find all the options installed
other than pulling the cover to see. There are two programs that may
help: The Elecraft K3 Utility program and K3_EZ:
https://groups.io/g/Elecraft-K3/files/K3_EZ
-de John NI0K
Dave Cole
Hi,
I am about to take a look at a K3 which a SK estate has asked me to sell
for them. It was a friend of mine, for of many decades that passed, and
his children and wife have now decided to sell the K3/P3.
I need to inventory the K3 to see what all is in it... Aside from the
obvious, and
For SSB, I use the same.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 3/24/21 8:24 AM, Andy Durbin wrote:
"Calibration aside, stations checking into nets should always zero-beat
Hi,
Someone had a K3 for sale here recently, could you contact me off list
please.
--
73, and thanks,
Dave (NK7Z)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
18, 2021, at 12:52 PM, Dave Cole wrote:
Is supp...@elecraft.com, still the correct address to write to? I have sent
three inquiries to that address, across a week and a half, and gotten no reply.
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical
Is supp...@elecraft.com, still the correct address to write to? I have
sent three inquiries to that address, across a week and a half, and
gotten no reply.
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW
at 650Hz but
will try 700 again soon.
Dave Cole wrote:
One of the most common forms of hearing loss starts at the high
frequencies and works its way down with age, but that's far from
universal. When one or more notches develop at certain frequencies, it's
often the result of noise exposure
Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 3/13/21 11:15 PM, Jim Brown wrote:
On 3/13/2021 9:37 PM, Dave Cole wrote:
I had a hearing test many years ago, and asked to see the results.
Turns out I had a null at some frequency I don't remember right now
Jim,
Here is an interesting story:
I had a hearing test many years ago, and asked to see the results.
Turns out I had a null at some frequency I don't remember right now, but
it was exactly where I had selected my sidetone to be... My guess is
because I heard less noise there... Anyway--
I wanted to drop a note to the Elecraft folks to thank them for all the
good work they did getting ready for the "event". It was good to meet a
few folks I had not, and good to get a few answers I needed. The K4
presentation was good, and glad you will have it on YouTube later...
So...
Navagate to:
https://pskreporter.info/pskmap.html
Put your call sign in on the top, and see if anyone is listening and
hearing you...
Go to a band that you are hearing a lot of stations on, and if within
your class of your license, transmit there by calling a CQ. After a few
minutes, hit
I think the issue is in shipping... When, (not if), the shipper drops
your K3 to the ground from 4 or 5 feet up, and the rig stops with a 20G
or 30G, (or more), pulse at end to motion, the weighted knob then
becomes a rather good looking hammer hitting the encoder shaft... Never
a good
https://www.amateurradio.com/what-has-happened-to-elecraft/
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
no longer worry about this FW bug.
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
-Original Message-
From: elecraft-boun...@mailman.qth.net On Behalf Of Dave Cole
Sent: Monday, February 08, 2021 14:34
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 span changing
How does one set
string, and the second
one near the end. This works for me, so I no longer worry about this FW bug.
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
-Original Message-
From: elecraft-boun...@mailman.qth.net On Behalf Of Dave Cole
Sent: Monday, February 08, 2021 14:34
To: elecraft
full span. In the
Tracking Mode, your receive frequency is always centered and the
spectrum moves past it as you tune.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 2/8/2021 2:34 PM, Dave Cole wrote:
How does one set the follow option, I just looked through the menu of
the P3, an
How does one set the follow option, I just looked through the menu of
the P3, and don't see it.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 2/8/21 12:39 PM, Fred Jensen wrote:
Does the K4 do temp compensation like the K3 does, in very small steps?
If so, is the step size the same as the K3?
I used to do dopplergrams using my old 756 PRO III, but with the K3 the
frequency corrections are in steps and mess up the dopplergrams...
73, and thanks,
Dave (NK7Z)
/2021 5:16 PM, Dave Cole wrote:
I did something similar as well, I have a neighbor that lives around
700 feet away, he ran a Collins S-Line. I convinced him to buy a K3,
which he did.
I did screen grabs of his signal with the K3, and neither of us having
a new synth, then when he installed his
Hi,
Remember those filters are Roofing Filters, not the normal filters you
see in a rig, and use to isolate a CW signal...
The digital filter, (you just dial the bandwidth you want from the front
panel), in the K3 far surpasses anything I have used in the past, I get
to very narrow
I did something similar as well, I have a neighbor that lives around 700
feet away, he ran a Collins S-Line. I convinced him to buy a K3, which
he did.
I did screen grabs of his signal with the K3, and neither of us having a
new synth, then when he installed his, then when I installed
Too quiet here...
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
__
Elecraft mailing list
Home:
Thank you for sharing that... I have saved it to my system.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 1/18/21 2:05 PM, Alan Bloom wrote:
MFJ makes a pair of small,
Grant,
All of this topic drift into areas non-Elecraft, (and there is a massive
amount of it), is a direct result of the moderation efforts Elecraft
puts into this group.
If the group owners, (Elecraft), wanted things tighter, they would
moderate more tightly. If they don't have staff to
Hi,
I have used one of those, and they seem to work great on a single
specular source... If you have more than one source of RFI, not so
good... If the source is distributed, not so good... Needs to be
specular in nature for best results. I have had better luck with an
ANC-4, as opposed
Be careful...
I believe ou would need the current copyright holders permission to put
that material up again...
73, and thanks,
Dave (NK7Z)
On 1/6/21 1:16 PM, Hank via Elecraft wrote:
I'm in!
- Original Message -
From: Tony KX3H (kx3h.ra...@gmail.com)
Date: 01/06/21 13:56
To:
Before you put up that 6BTV see:
https://www.nk7z.net/notes-on-tuning-a-6btv/
for tune up notes...
I am now short 5 countries, for a 5BDXCC using just a 6BTV, and 40
radials. In under 3 years.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical
Say it isn't so...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 1/4/21 8:27 AM, Clay Autery wrote:
we MIGHT just streamline the reflector traffic a bit.
Lyn, W0LEN
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave Cole
Sent: Monday, January 04, 2021 1:02 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Long messages
I too use Thunderbird, and it is wonderful. I
I too use Thunderbird, and it is wonderful. I look at 40 or so lists,
each has a folder, and Thunderbird has filters, so they all go directly
into their respective folders.
Free, and far better than anything out there...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer
I had no idea I could paste the Elecraft PDF files! THANK YOU!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 1/3/21 1:44 PM, K8TE wrote:
It is a simple process to review firmware
My prediction is that the K4 will ship next year... :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 12/30/20 8:46 AM, Joseph Trombino, Jr wrote:
Howdy Gang.
As the old year
I must compliment you on Elecraft Customer Support Wayne. You all did a
similar thing for me a few years ago for the Genovation Pad project--
THANK YOU! No other company would allow that much customer interaction.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL
See:
https://www.nk7z.net/adding-external-keypad-k3/
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 12/28/20 10:48 AM, Harlan Sherriff via Elecraft wrote:
Bret
One way would be to
Somebody has been reading Robert Heinlein... :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 12/26/20 3:08 PM, Gwen Patton wrote:
Art, you CAN fix stupid. Nature itself abhors
Thanks for sharing!! Merry Christmas to you!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 12/22/20 3:07 PM, g...@gmx.net wrote:
Hello Elecrafters,
while we are all waiting for
I am running with no interface, an d all works well here. You might
consider re-configuring to not use the Rigblaster.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 12/11/20
think about linux
OS issues, linux commands, and other arch-nerdly stuff. Updates are essentially
one-click (maybe two).
It's a radio, not a computer
73,
Wayne
N6KR
On Dec 6, 2020, at 3:51 PM, Dave Cole wrote:
Hi Paul,
I want to check my understanding of what you just said
Hi Bill,
Hopefully Elecraft will be speedy with updates, I am sure they will be,
as they have a superb history of support,
The security aspect was my concern-- freezing the OS is bad, and I doubt
they will do that.
This however now brings up the question of what happens if Elecraft goes
manufacturers
Paul KB9AVO
On Sun, Dec 6, 2020, 6:52 PM Dave Cole <mailto:d...@nk7z.net>> wrote:
Hi Paul,
I want to check my understanding of what you just said:
For whatever reason, a kernel update not triggered by Elecraft,
triggered a shipment stoppage o
Hi Paul,
I want to check my understanding of what you just said:
For whatever reason, a kernel update not triggered by Elecraft,
triggered a shipment stoppage of the K4s? Is that correct?
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
What is the "Amplifier Swap Program"?
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 12/4/20 11:09 AM, John Reilly wrote:
Update:
The day after I posted on this reflector, I got a
with a program like team viewer or
Google Remote.
Richard
K6VV
Sent from my iPhone
On Dec 2, 2020, at 3:02 PM, Dave Cole wrote:
Thank you Bob, getting some actual numbers helps... I cut off operations at
70C. In fact, if it starts getting above 65, I will terminate ASAP. Knowing
it could get
.
73
Bob, K4TAX
Message: 1
Date: Wed, 2 Dec 2020 08:36:54 -0800
From: Dave Cole
To:elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA500/KAT500 and RTTY
Thanks sir...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW
THANK YOU for that link! I saw a post, and emptied my trash on a
different list, and deleted the post, then closed my browser... I have
been looking for it for a bit!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director,
/2020 9:57 AM, Dave Cole wrote:
Hi,
Any recommendations as to the max power I might run using a KPA500 and
KAT500, on say, a three to five minute transmission?
Also, what is the recommended max temp for the PA on this device as
measured by the KPA500
Hi,
Any recommendations as to the max power I might run using a KPA500 and
KAT500, on say, a three to five minute transmission?
Also, what is the recommended max temp for the PA on this device as
measured by the KPA500?
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer
One can always use the built in attenuator...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 11/25/20 4:27 PM, Don Wilhelm wrote:
Doug,
I lived through cycle 19 of the sunspot
quickly
(slightly bad connection) when power is applied.
If it starts again, see if it continues when running into a dummy load.
73,
Don W3FPR
On 11/18/2020 4:59 PM, Dave Cole wrote:
Hi,
Thank you for the response... I was running the tuner in MAN mode...
I did the tuner training a while ago
to the antenna (see the manual for the
bin sizes for each band), you should switch it to MANual. That will
keep it from trying to TUNe when you first transmit.
73,
Don W3FPR
On 11/18/2020 2:56 PM, Dave Cole wrote:
Hi,
I have a quick question regarding operation of my KAT500 tuner. I
have a K3
Hi,
I have a quick question regarding operation of my KAT500 tuner. I have
a K3 feeding a KPA500, feeding the KAT500, feeding a 6BTV vertical which
is tuned up well, and can run with the tuner in bypass, and keep SWR
below 1.7:1 on all bands...
If I am using the KAT500 as a tuner, and I
Have you tried using a backed up config file? That may set everything
back as it was... This is assuming the config file took a hit...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave Cole
Sent: Sunday, November 08, 2020 9:37 AM
To: elecraft...@groups.io; elecraft@mailman.qth.net
Subject: Re: [Elecraft] [Elecraft-K3] Winlink
Hi again,
Thank you! I set Ardop, and all is working again... I
, since it is
much faster than ARDOP).
73
Lyn, W0LEN
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave Cole
Sent: Sunday, November 08, 2020 8:00 AM
To: elecraft...@groups.io; elecraft@mailman.qth.net
Subject: Re
Cross drill next Saturday?
73
Lyn, W0LEN
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave Cole
Sent: Saturday, November 07, 2020 2:11 PM
To: elecraft...@groups.io; elecraft@mailman.qth.net
Subject: Re: [Elecraft] [Elecraft
Is that like the "Rapid Disassembly Event" that happens during rocket
launches now and then?
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 11/7/20 11:50 AM, Fred Jensen wrote:
use
Bob - W3DK
-Original Message-
From: elecraft...@groups.io [mailto:elecraft...@groups.io] On Behalf Of Dave
Cole
Sent: Saturday, November 07, 2020 1:32 PM
To: elecraft@mailman.qth.net; elecraft...@groups.io
Subject: [Elecraft-K3] Winlink
Hi,
Is anyone using Winlink, (latest), with
Andy,
You have far too much time on your hands... :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 11/7/20 8:28 AM, Andy Durbin wrote:
"Careful inspection of the air-spaced
Hi,
Is anyone using Winlink, (latest), with Windows 10, (latest), and a K3?
All used to work, and all of a sudden PTT fails. All else works, the
radio is driven to the best frequency, etc... I have made no known
changes. There was a windows update... I would like to verify it still
This is starting to sound like a Cialis ad...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 11/5/20 7:02 AM, Tommy wrote:
Funny you mention this Chuck, I just received my hat
, not
the circle which has always been red.
Sent from my iPhone
...nr4c. bill
On Sep 24, 2020, at 9:56 AM, Nr4c wrote:
Who remembers “Lucky Strike green has gone to war.” When the green circle
changed to red.
Sent from my iPhone
...nr4c. bill
On Sep 24, 2020, at 8:37 AM, Dave Cole wrote
LSMFT... Remember that one? The clean version that is...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 9/24/20 5:18 AM, Nr4c wrote:
“I can’t believe I ate the whole thing”?
When unpowered the KAT500 is bypassed, ANT1.
When the ATU is in mode BYP, yes, it’s bypassed.
73 de Dick, K6KR
> On Sep 13, 2020, at 15:52, Dave Cole mailto:d...@nk7z.net>> wrote:
>
> Hello,
> My KAT500 which worked yesterday, now shows a 3:1 on
he KAT500 is bypassed, ANT1.
When the ATU is in mode BYP, yes, it’s bypassed.
73 de Dick, K6KR
> On Sep 13, 2020, at 15:52, Dave Cole mailto:d...@nk7z.net>> wrote:
>
> Hello,
> My KAT500 which worked yesterday, now shows a 3:1 on 18 MHz.,
only. A
Dievendorff wrote:
When unpowered the KAT500 is bypassed, ANT1.
When the ATU is in mode BYP, yes, it’s bypassed.
73 de Dick, K6KR
On Sep 13, 2020, at 15:52, Dave Cole wrote:
Hello,
My KAT500 which worked yesterday, now shows a 3:1 on 18 MHz., only. Antenna is
a single feedline to a 6BTV
Hello,
My KAT500 which worked yesterday, now shows a 3:1 on 18 MHz., only.
Antenna is a single feedline to a 6BTV, and an analyzer says all is good
at low power. At 100 watts, all seems good.
All other bands seem OK at high power.
Question: When in bypass, is the entire tuner bypassed?
Congratz Jim! On both, a house that is intact, and your receiving the
ARRL Tech Services Award!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 9/13/20 6:40 AM, Bill Steffey NY9H wrote:
We are getting ready to move... One of the processes I intend on
performing on any new site is described at:
https://www.nk7z.net/sdr-rfi-survey-p1/
using an SDR as a site survey tool... I will have a quiet location...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
I have a 22 db noise floor change here when power fails... If the pot
grower has his lights on the noise floor drops almost 40 db during a
power fail.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical
Yes... I wish most folks would follow the convention of putting the
device name in the subject...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 9/6/20 5:00 PM, Alan - G4GNX wrote:
I'd
1 - 100 of 636 matches
Mail list logo
