to 10,000,002.3 Hz. That info can be
used to correct your results in the Frequency Measuring Test (FMT), but is
of no other practical use that I can think of. It was fun to beat some of
the big boys in the last FMT, using only a stock K3 without even a TCXO!
Dave Hachadorian, K6LL
Yuma, AZ
I tune to 10,000,002 and adjust REF CAL for 20 beats in 10 seconds, or as
close to 20 as I can get, with the granularity of the ref cal steps. In the
last ARRL FMT, all of my measurements were within 1 Hz, using only a K3
without even a TCXO.
Dave Hachadorian, K6LL
Yuma, AZ
-Original
What does he have for config/TX DLY? Try resetting it to default 008. High
values of TX DLY cause light CW weight.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: dl2ki
Sent: Thursday, January 21, 2021 11:22 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3: CW
I have the upgraded synthesizer and still see the shortened dits.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Joe Subich, W4TV
Sent: Monday, December 7, 2020 12:03 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 shortened dits - you can remedy this under N1MM
I have the new synthesizer.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Jim McDonald
Sent: Monday, December 7, 2020 11:19 AM
To: Reflector Elecraft
Subject: Re: [Elecraft] K3 shortened dits - you can remedy this under N1MM+
Wasn't this problem fixed with the new
Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Dick Green
Sent: Monday, December 7, 2020 9:41 AM
To: Dave Hachadorian
Subject: Re: [Elecraft] K3 shortened dits - you can remedy this under N1MM+
First I’ve heard about this, and I’ve used K3’s since they were introduced.
Can you
about it yesterday. The K3 monitor sounds
normal.
Life is too short for wimpy dits!
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Douglas Zwiebel
Sent: Sunday, December 6, 2020 6:38 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 shortened dits - you can remedy this under
Bingo! That's the answer! Many thanks Bill!
I confirm that keying compensation = 6 produces nice 50% duty cycle dits
with the K3.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Willard Myers
Sent: Sunday, December 6, 2020 2:34 PM
To: k6ll.d...@gmail.com
Subject
setting in N1MM.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Roy
Sent: Sunday, December 6, 2020 2:19 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 shortening CW dits
Increase the weight setting going into the K3 jack.
73, RoyK6XK
harp-eared
,
etc. restrictions with QRQ ON.
I have two K3’s, and they both behave the same way. Any ideas out there?
Thanks!
Dave Hachadorian, K6LL
Yuma, AZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
style chokes!
Dave Hachadorian, K6LL
Yuma, AZ
.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
from that class:
Evaporation is a cooling process.
High octane gasoline is slow-burning gasoline.
The electric company bills you for kilowatt-hours, so they are
not a power company, they are an energy company.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Don Wilhelm
Sent
In troubleshooting problems like these, it is helpful to plug
headphones into the sound card audio output jack, to see whether
it's a computer issue or a radio issue.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Glenn - N5RN
Sent: Wednesday, November 21, 2018 9:56 AM
Here are some things to look at:
https://marc.info/?l=elecraft=145323127930319=2
Dave Hachadorian, K6LL
-Original Message-
From: George Fremin III
Sent: Wednesday, September 12, 2018 6:53 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Deaf K3
I turned on the K3 this morning
If I were to sell my rigs, I think I would go back and look at some previous
successful sales, and figure out the range of percentages of the new price that
they were asking. Then I would calculate the new price of my rigs and apply a
percentage somewhere in that historical range.
Dave
it has a nice padded headband
that doesn't abrade my bald head like the rough webbing on the
CM500.
So how is the SB-40 working for you? Are you happy with the
sound in the monitor, and with on the air reports?
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: N2TK, Tony
Sent
the problem.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Reed
Sent: Wednesday, March 14, 2018 5:56 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Dish/Direct TV RFI?
Has anyone had trouble with RFI, receive or transmit, with Dish or
Direct TV. I have cable through
that
this filter should be really labeled KFL3A-370, and is not much
different than your 400.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Chuck Chandler
Sent: Thursday, March 8, 2018 9:22 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Planning the next filters
Right now I
If your K3 does not have gold pins on the front panel, and they
are getting oxidized, strange error messages may occur on
power-up. Either do the gold pin mod, or hit the old tinned pins
with DeoxIT.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Don Wilhelm
Sent
, with ground/signal on each twisted pair.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Dennis Ashworth
Sent: Sunday, February 25, 2018 2:50 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Advice needed: Remote Station Enhancement
I’ve been remoting my K3, KPA500, KAT500
Signature is required on delivery, so you will have a strong
delivery person facing you. He or she will move it inside the
front door for you, and then you can use Don Wilhelm's "invert
the box technique." That's what happened here.
Dave Hachadorian, K6LL
Yuma, AZ
-Origin
The P3 with external monitor sure does a good job of displaying
meteor pings! That's about all I am seeing on 10. Back to the
160 Contest.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Wayne Burdick
Sent: Saturday, December 2, 2017 5:33 PM
To: k...@roadrunner.com
Cc
Diode D5 on the KXV3 is one weak link. A more robust replacement
is available from Digikey for $0.42
https://marc.info/?l=elecraft=145323127930319=2
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: brian
Sent: Friday, October 27, 2017 10:35 AM
To: elecraft@mailman.qth.net
or
repeating the calibration procedures. Suggestions are welcomed.
Thanks.
Dave Hachadorian, K6LL
Yuma, AZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
/bnh/controller/home?A=details===y=1876%2C%7Bcreative%7D%2C%7Bkeyword%7D=CjwKCAjwk4vMBRAgEiwA4ftLs902BIJSanAv0EZ96k2J4RrQ0dyiks6urxZ7Klc2UJq6ZaJRKD1C7RoCUE8QAvD_BwE=REG=Y=1066287
Dave Hachadorian, K6LL
Big Bear Lake, CA
__
Elecraft
of them with signal strength as low as –25 dB.
I don’t think I am long for this mode anyway. Life is too short for 1 Baud
communication.
Dave Hachadorian, K6LL
Yuma, Arizona
-Original Message-
From: Don Wilhelm
Sent: Sunday, April 16, 2017 7:41 PM
To: Brian Hunt ; Reflector
with tone frequencies of about 1800 – 1950 Hz, and ALC varied from zero to
five bars on the different tones. Sound card output is about 50%, and Line In
level is at 12. Is this variation normal, or am I doing something wrong, and
where should I set the ALC?
Thanks.
Dave Hachadorian, K6LL
Yuma
What happens if you transmit 100 watts into a dummy load?
Dave Hachadorian, K6LL
Yuma, Arizona
-Original Message-
From: Jim Kutsch
Sent: Sunday, March 26, 2017 4:02 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] RF in Microphone
Some progress but some new questions. When
, as recommended by G3YYD
By the way, Elecraft guys, it would be nice if the AGC Threshold were
remembered by mode.
Dave Hachadorian, K6LL
Yuma, Arizona
-Original Message-
From: NOEL POULIN
Sent: Monday, January 9, 2017 12:31 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] best agc setting
Yaesu FT-990, 12V finals
3rd order TX IMD -38dB
ARRL Review 11/91
ARRL heaped glowing praise upon this rig way back in 1991 for its
Tx IMD performance. So, what was Yaesu's secret, and why haven't
manufacturers figured it out and capitalized on it ever since?
Dave Hachadorian, K6LL
Yuma
You will
probably have to download and read the owner's manual to make
sure.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Doug Hensley
Sent: Sunday, July 3, 2016 1:06 PM
To: Elecraft List
Subject: [Elecraft] Please recommend an HD monitor to use with
P3SVGA
Subject says i
I forgot to mention that the SB-45 also has a nice padded
headband. It doesn't irritate the top of my bald head as much as
the rough webbing of the CM500. Judging from the pictures of the
crowds at Dayton this year, this could be a very significant
feature for a lot of hams!
Dave
of boost in equalizer bin
4.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Mike Harris
Sent: Thursday, May 26, 2016 7:14 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Headset
Hi,
If I remember correctly the Koss SB45 headset has been offered as
a
suitable substitute
in the footnotes, 2 KHz
dynamic range is only 81 dB, which would place the 7300
considerably lower in the table, but still pretty good.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Joe Subich, W4TV
Sent: Monday, April 25, 2016 11:55 AM
To: elecraft@mailman.qth.net
Subject: Re
, and AGC THR as high as
possible without causing a sound card overload warning on the
loudest signals. For RTTY, with my usual gain settings, I find
that AGC THR = 17 works well.
Dave Hachadorian, K6LL
Yuma, AZ
.
__
Elecraft mailing
If you are using AFSK, it's best to stick with the standard 2125
frequency, so the second harmonic is outside the 2.7 Khz audio
passband. With FSK, you can go lower. My ears like the sound of
915 Hz.
-Original Message-
From: Mike Dodd
Sent: Tuesday, April 12, 2016 8:03 PM
To:
Current thinking is to use a fairly wide filter for RTTY. The
software filters that are applied in the sound card are much
narrower, about 50 Hz wide. Lately I've been using the 2.7 KHz
roofing filter, with DSP bandwidth set to about 600 Hz.
Dave Hachadorian, K6LL
Yuma, AZ
Fred,
Try this:
http://marc.info/?l=elecraft=144267531705514=2
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Fred Jensen
Sent: Friday, April 8, 2016 3:44 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 front panel switches
My K3, S/N 642, has been slowly developing
I used to operate CW with AGC OFF, but a loud signal would come
along and trigger the AF Limiter, which causes gross distortion.
Now I operate CW with fast AGC , AGC SLP = 0, and AGC THR = 20.
It's almost as good as no AGC , and you don't have to worry about
the AF Limiter.
Dave Hachadorian
I also have a nice 24" 1080p monitor. With the P3 it works a lot
faster running at 1440 x 900 resolution, and looks just as good
to me.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: David Ahrendts
Sent: Sunday, March 20, 2016 1:48 PM
To: elecraft@mailman.qt
just happened to spot a good
deal.
Dave Hachadorian, K6LL
Yuma, AZ
.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
Here ya go:
http://marc.info/?l=elecraft=145323127930319=2
If you have the KXV3 installed, it is probably D5. I checked the
Mouser part number for the heavy-duty replacement, and it's still
good.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Randy Farmer
Sent
none of the controls seenm to work on the front panel, i can
tune the vfo
and it changes freq, but i cant get into the menu.
http://marc.info/?l=elecraft=144267531705514=2
Dave Hachadorian, K6LL
Yuma, AZ
.
__
Elecraft
the radio off, and then on
again.
Good luck. I hope it works for you.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Jeff Schmidt
Sent: Friday, February 26, 2016 9:34 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 unable to change passband control
shift amount
you transmit, it
burns through the oxidation, which lasts only for a while. A
treatment with Deox-it or a relay burnishing tool on the
offending contact is the cure.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Dick Lindzen
Sent: Tuesday, February 16, 2016 7:45 PM
Try this:
http://marc.info/?l=elecraft=144267531705514=2
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: n...@n1ix.com
Sent: Monday, February 8, 2016 10:09 AM
To: 'Elecraft'
Subject: [Elecraft] K3 problem
My K3 developed a problem this weekend.
None of the front panel
Here's a more specific link to the fans that I used:
http://www.newegg.com/Product/Product.aspx?Item=N82E16835608032_mc=TEMC-RMA-Approvel_mmc=TEMC-RMA-Approvel-_-Content-_-text-_-
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: drewko
Sent: Saturday, January 30, 2016 3:34
e spooling up and down as they changed
speed.
If you're not a contester, you may never hear the fans, so it may
not be an issue :)
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: drewko
Sent: Saturday, January 30, 2016 3:34 PM
To: elecraft@mailman.qth.net
Subject: [Elecr
, but the protector has to go in the RX ANT OUT / RX
ANT IN loop, and then you have to select RX ANT for receiving.
Dave Hachadorian, K6LL
Yuma, AZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
aft.365791.n2.nabble.com/Update-re-K3-loss-of-RX-sensitivity-td5823238.html
Dave Hachadorian, K6LL
Yuma, AZ
.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfa
on two USB ports. It sounds like a
big deal, but it's not really.
You will need to build a little box to handle earphone audio: LL,
LR, RR. In LR, a pot across the two can give you a variable
blend.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Doug Ellmore
Sent
The mic does move to full vertical to get it out of the way.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: n...@charter.net
Sent: Wednesday, January 6, 2016 4:29 AM
To: Dave Hachadorian ; Reflector Elecraft
Subject: Re: [Elecraft] Koss SB-45 Headset, update on comfort
The SB-45 is already electret. You must be thinking of the SB-40
which has a dynamic element, and reportedly sounds pretty bad.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Tim
Sent: Wednesday, January 6, 2016 9:59 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft
like myself. My ears
didn't get as hot as with the CM-500, and the SB-45 headband has
nice soft padding that didn't irritate the top of my bald head
like the CM-500 sometimes does.
Overall, I think the SB-45 is equal to or better than the CM-500,
at about half the price.
Dave Hachadorian, K6LL
I just turned on my AL-1500 Amplifier and checked sound
isolation. The SB-45 and CM-500 are about the same in sound
isolation. Neither one is particularly good.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Barry N1EU
Sent: Tuesday, December 29, 2015 9:52 AM
To: Dave
. My mic goes to the back of a computer on the floor, and
my headphones go to an SO2R box on the table.
The SB45 is around $25 on Amazon, compared to $55 for the CM-500.
I think this headset is going to be a keeper, but I’ll give a long term comfort
report next week.
Dave Hachadorian, K6LL
Yuma
delay works at any
speed.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Robert Bajuk
Sent: Saturday, December 19, 2015 5:28 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] VOX / PTT combination on k3
Hi,
Simple question... Is there a way to avoid VOX delay on CW mode
of
inactivity.
Dave Hachadorian, K6LL
Yuma, AZ
.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
It would be nice to know the DSP filter shape factors of the
various narrow CW DSP filters
http://marc.info/?l=elecraft=120716404727944=2
Dave Hachadorian, K6LL
Yuma, AZ
.
__
Elecraft mailing list
Home: http://mailman.qth.net
=elecraft=120716404727940=2
The inference I drew from Lyle's response is:
DSP 60 dB BW = DSP Setting + 300 Hz.
You can see that DSP "shape factor" varies with the DSP setting,
so it is easier to remember the DSP+300 formula.
Dave Hachadorian, K6L
failed, and I replaced it
with an electret element out of an old toy that I found laying
around the house. It sounds fine.
The SB45 headset has an electret element, but it is not the same
comfortable headphone arrangement as the CM-500.
Dave Hachadorian, K6LL
Yuma, AZ
-Original
If you are using a headset, rather than a loudspeaker, you can
set antivox = 000.
Mine has been sitting at zero for years. I never even looked at
it before today. I never use a speaker.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Wes (N7WS)
Sent: Wednesday
bought replacement encoders.
They were quite inexpensive, but when I went to replace them, the
job looked too tough for me. I just exercised the old
encoder/switches and the problem went away and has not recurred.
Dave Hachadorian, K6LL
Big Bear Lake, CA
-Original Message-
From
addressing problems.
I had a similar problem a couple years ago, and ordered four
replacement encoder/switches, which are surprisingly inexpensive.
When I went to actually do the job, it looked nasty, and I never
replaced them. The problem has never recurred.
Dave Hachadorian, K6LL
Yuma, AZ
for working with
SMD's:
http://www.amazon.com/SE-MH1047L-Illuminated-Multi-Power-Magnifier/dp/B003UCODIA/ref=sr_1_1?ie=UTF8qid=1438269064sr=8-1keywords=headband+magnifier
Dave Hachadorian, K6LL
Yuma, AZ
.
__
Elecraft mailing list
Home
was excellent before, and it
is still excellent with the KSYN3A. I think the spec differences
between the radios are down in the weeds.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Phil Hystad
Sent: Tuesday, July 28, 2015 9:14 AM
To: Phil Wheeler
Cc: elecraft@mailman.qth.net
want to get the two radios going for the NAQP RTTY next weekend, so I
hope it's field-repairable.
I'll start digging into the schematics now.
Thanks.
Dave Hachadorian, K6LL
Yuma, AZ
__
Elecraft mailing list
Home: http://mailman.qth.net
ears.
right radios in both ears.
left radio in left ear, right radio in right ear.
You should have a Winkey USB for 2 radio CW and all-mode PTT.
You also need one antenna per band, or two tribanders, or one tribander and a
triplexer.
You need two amplifiers.
That's all I have.
Dave
The 20 meter temperature increase sounds normal to me. The 10
MHz and 21 MHz behavior is a little strange. Here is a link to a
PA temp experiment that I conducted on both of my K3's:
http://marc.info/?l=elecraftm=128534687205664w=2
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message
What the other guys said, in different words:
Turn off the K3.
Unplug the DB-9 on the back of the K3, also unplug the key and
paddle.
Turn on the K3, and go to config PTT - KEY. Make sure it says
OFF - OFF.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Jack West
Sent
connected.
The noise increase is obvious, but subtle, and I wouldn't
consider it a hindrance to operation, but it has raised my
curiosity as to why I am just now hearing it.
Ideas would be appreciated. Thanks in advance.
Dave Hachadorian, K6LL
Yuma, AZ
getting old, especially at $120 a pop to
get it fixed.
Dave Hachadorian, K6LL
Big Bear Lake, CA
.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
replaceable in the field.
It's also good news because it points out the efficacy of the
E85056 protection mod.
My apologies for making a wrong assumption. The symptoms were
exactly the same as the two previous failures of the speaker amp.
Dave Hachadorian, K6LL
Yuma, AZ
degraded that it becomes easy to
miss a good on-topic post.
Dave Hachadorian, K6LL
Yuma, AZ
.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
and shipping are very
reasonable.
Thanks to Hank, W6SX, for pointing out cablewholesale.com as a
good supplier.
Dave Hachadorian, K6LL
Yuma, AZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
So you guys are talking about the KX3 monitor, right?
I can't hear any delay in the K3 monitor, and I am VERY sensitive
to that.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Al Lorona
Sent: Sunday, April 20, 2014 4:07 PM
To: elecraft@mailman.qth.net
Subject: Re
it doesn't loop audio back to the K3 audio input.
Dave Hachadorian, K6LL
Yuma, AZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I have for sale two KFL-3A 1.8 KHz, 8 Pole SSB Filters for the
K3.
$115 each. Free shipping, no tax. Paypal preferred.
Dave Hachadorian, K6LL
Yuma, AZ
.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
. If that is the case, THEY are the ones who need
the K3's to clean up their transmitted signal. If their phase
noise covers the frequency that you are trying to hear, there's
not much you can do at your end.
Dave Hachadorian, K6LL
Yuma, AZ
pair of 1.8 filters, if
someone is interested in them.
Dave Hachadorian, K6LL
Yuma, AZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
on the external 24 SVGA Monitor. I will
never forget it.
Dave Hachadorian, K6LL
Yuma, AZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
I’ve done all that. On some voices, distortion is minimal. On others, it is
serious.
Dave Hachadorian, K6LL
Yuma, AZ
From: Johnny Siu
Sent: Sunday, March 30, 2014 5:29 PM
To: Dave Hachadorian ; Reflector Elecraft
Subject: K3 in WPX SSB with 2.7 roofer
Hello Dave,
I did have the same
Given the casual usage you describe, I don't think you need any
options. You can always install filters, etc., later, if you
find a need develops. If any of your loads (amplifiers, antennas)
are over 2:1 SWR, you will want the tuner.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message
The US Lid who sited 'the Kings English' was the last straw.
That should be cited.
Dave Hachadorian, K6LL
Yuma, AZ
.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
for applications that don't
require frequent movement. Here are some Monoprice 3.5 mm stereo
cables:
http://www.monoprice.com/Category?c_id=102cp_id=10218
As you can see, prices are very reasonable.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: James Robbins
Sent: Thursday
an
adjacent jack.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Jim Brown
Sent: Thursday, January 23, 2014 8:01 AM
To: Dave Hachadorian
Subject: Re: [Elecraft] High quality stereo cables
On 1/23/2014 6:37 AM, Dave Hachadorian wrote:
I buy all my A/V cables from monoprice.com
The speaker amp is U1 on the DSP Board. The IC is an LM4950TS.
The pins are very closely spaced, too close for me.
Elecraft now has an Audio Protection Assembly circuit board, Part
Number E850506 for $2.36 plus shipping.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From
Bob,
It's not on the web site. I heard about it indirectly, sent them
an email, got the part number and price, then called up and
ordered two, one for each of my K3's. I haven't installed them
yet.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Bob
Sent: Tuesday
with the audio
output channels. Hopefully that will do some good.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Don Wilhelm
Sent: Tuesday, January 14, 2014 5:10 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 - No speaker output
Dick,
If you have an early K3
Mine used to hang occasionally when I was running 1920 x 1080
resolution. It hasn't happened since I switched to 1440 x 900.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: George Thornton
Sent: Friday, January 3, 2014 9:57 AM
To: elecraft@mailman.qth.net
Subject: Re
the pins are very close together. If you know an excellent
soldering technician, maybe they could do it for you. Otherwise,
you have to send the radio, or just the DSP Board, for repair.
Dave Hachadorian, K6LL
Yuma, AZ
-Original Message-
From: Marcel Jorba
Sent: Saturday, December 21
This 24 monitor is just what you need for your P3 SVGA:
http://www.newegg.com/Product/Product.aspx?Item=N82E16824009422
$99 with promo code BFNNTJL22
Free shipping, no sales tax (except CA).
Three Business Day Shipping available for 99 cents more.
Deal expires 12/3
Dave Hachadorian, K6LL
Yuma
Allen's comment matches my experience exactly.
Dave Hachadorian, K6LL
Big Bear Lake, CA
-Original Message-
From: Allen Brier N5XZ
Sent: Tuesday, September 03, 2013 10:02 AM
To: elecraft@mailman.qth.net ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 using Clear Speech Speaker
It would be competing with the likes of this:
http://www.amazon.com/Baofeng-UV5RA-136-174-Dual-Band-Transceiver/dp/B009MAKWC0/ref=sr_1_2?ie=UTF8qid=1376951738sr=8-2keywords=baofeng
Dave Hachadorian, K6LL
Big Bear Lake, CA
-Original Message-
From: Mel Farrer
Sent: Monday, August 19
for the four encoder/switches (about
$2 each) but never installed them, because everything has been
totally solid ever since, and installation seemed like a PITA.
As I remember, it took about ten minutes of fiddling with the
controls until everything started working again.
Dave Hachadorian, K6LL
Big Bear
for about $120 any time on
Amazon. If you hunt for sales, you can do even better. Mine are
Dell refurbs that I got for $75 on sale (not currently
available).
Dave Hachadorian, K6LL
Big Bear Lake, CA
-Original Message-
From: ato...@cybermesa.com
Sent: Tuesday, July 23, 2013 1:10 PM
up!
Astron linear supplies also have a simple (internal) voltage
adjustment, so you can pump the voltage up to 14.5 for reduced
IMD.
Dave Hachadorian, K6LL
Yuma, Arizona
.
__
Elecraft
, and there is no frequency error when the RIT is
zeroed. I'll do it that way from now on, but it was driving me
batty during the contest.
Dave Hachadorian, K6LL
Yuma, Arizona
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
the testing at the board
level.
The radio is a great value, even at the factory-assembled price.
Dave Hachadorian, K6LL
Yuma, Arizona
-Original Message-
From: Richard W Hemingway
Sent: Sunday, May 26, 2013 12:22 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Kit or factory
The main board in my kit had a component that was improperly
soldered. It was explained to me at the time that the defect was
not detectable in board-level testing. Maybe that testing has
improved over time.
Dave Hachadorian, K6LL
Yuma, Arizona
-Original Message-
From: Ron D'Eau
1 - 100 of 293 matches
Mail list logo
