Panadaptor, you will probably get more use from it than the sub rx. I
do... I had occasion to have it mine off for a bit, and it is crippling
to no longer have one... I use it so much more than a sub RX.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for
That is actually one of the best analogy's I have heard for a
Panadaptor, and it is dead on correct.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
for my order. The delay
was 5-10 BUSINESS days (two weeks). You're in line, be patient. :)
Rick wa6nhc
On 3/7/2015 7:10 AM, David Cole wrote:
HI,
I ordered a pair of synths about a week ago, and was wondering what the
delivery time has been on the West Coast? Can someone comment
HI,
I ordered a pair of synths about a week ago, and was wondering what the
delivery time has been on the West Coast? Can someone comment on the
time it took for the order to be fulfilled and delivered?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW
with the current synth orders in April, about the time I
expect have softened up the YL enough to get my order in. Even
with a late order, I expect to have a bit of a wait.
73 Bill AE6JV
On 3/7/15 at 7:10 AM, d...@nk7z.net (David Cole) wrote:
HI,
I ordered a pair of synths about a week
Please take this off list...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
NO! It certainly is more related to Elecraft than most of the off topic
issues that go on here!
Tom - W4BQF
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David
Cole
Sent: Wednesday, March 4, 2015 1:38 PM
To: elecraft@mailman.qth.net
Subject: Re
Yes...
If you press 1, 3, 7, and 9 while powering up, the radio de-rates
several key items, like S/N ratio, and the ability to load new software
into itself, in order to emulate a Flex radio.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support
Hi,
If you have an older hearing test, use the most recent one, and see what
part of the audio spectrum you hear best at, within the allowed spectrum
of the K3. Then select that frequency. I had a hearing test, and the
best frequency was several hundred HZ away from my optimum, and many db
away
was several hundred HZ away from my optimum
Best is not the same as optimum? That puzzles me.
Phil W7OX
On 2/28/15 1:42 PM, David Cole wrote:
Hi,
If you have an older hearing test, use the most recent one, and see what
part of the audio spectrum you hear best at, within the allowed
Except that when you play them back, your local system will color it...
Best process is to copy W1AW, find a weak feed, and see which tone works
best for you...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
That's OK, as I would find singing insanely hard.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for
The thread was closed, please let it die...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
Broke down and ordered them...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
That's 35% of the US traffic, not Internet traffic.
Also, the reason Netflix uses so much bandwidth is because they have
customers who use that bandwidth! I see zero issue with the latest
ruling.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW
Hello,
A bit ago, there was a discussion about an external macro tablet, that
could be connected to the K3. This looked very interesting to me, and I
think I want one... This brings up two questions.
1. Any suggestions for one at a good price.
2. How EXACTLY does it connect to a K3 with a P3
, W4TV
On 2015-02-20 10:51 AM, David Cole wrote:
Hello,
A bit ago, there was a discussion about an external macro tablet, that
could be connected to the K3. This looked very interesting to me, and I
think I want one... This brings up two questions.
1. Any suggestions for one
Mode change drops it out of split
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
73,
... Joe, W4TV
On 2015-02-18 10:40 AM, David Cole wrote:
Dave
XMIT to
begin transmitting
73,
... Joe, W4TV
On 2015-02-18 10:40 AM, David Cole wrote:
Dave (AB9CA),
Given your logic, we should get rid of all street signs, and stop
lights, and guard rails on bridges, and roads, because the drivers are
just initiative
I agree, this would work for me, and then the people that simply can't
stand it flashing, can turn it off...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
PM, David Cole wrote:
Mode change drops it out of split
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
to DATA or AM it shows a 'SPLIT N/A' message in the VFO B window
and refuses to change modes. So the op must manually turn off split to
go to those modes. And if the op has to push the button, that is not a
drop out.
73 de dave
ab9ca/4
On 2/18/15 12:15 PM, David Cole wrote:
Mode
I agree 100%, it does not need to say non split, just indicate split.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Wayne,
If the user has a P3 connected, please consider the addition of
something on the P3 to indicate split. Most of my eye action is on the
P3 in a pileup, not on the frequency.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Dave (AB9CA),
Given your logic, we should get rid of all street signs, and stop
lights, and guard rails on bridges, and roads, because the drivers are
just initiative, and the crutch o guard rails is not needed for them.
Implicit in your statement, is the assumption that the provided
indicators
- display of Transmit frequency on
keydown
I argued for this a long time ago, but Eric and others convinced me that a
flashing Delta-F LED would be too (!) annoying. Maybe they will recant,
given this discussion.
Wayne
N6KR
On Feb 17, 2015, at 10:08 PM, David Cole d...@nk7z.net wrote
I have had zero problems with Powerpoles, and would think it a bad thing
to not have them on the radio.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Hi,
Actually this process has been quite interesting to me as well... It is
good! We will all get input and a new feature will come from it.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
That's funny Guy!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
On Wed, 2015-02-18 at 16:45 -0500, Joe Subich, W4TV hosed down the
Internet with:
On 2015-02-18 1:08 PM, David Cole wrote:
Clearly you are not reading, or comprehending, what is being said
here...
I am reading *and* comprehending what has been said here. I've even
been guilty
Why not flash the Delta f lamp when in split?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV
I would LOVE to see a Pig Knob type of device for the K3! No actual
knob looking like a pig, but an external keypad would be wonderful!
Especially if it were a touch screen.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Could you expand a bit on the keypad please? Like how it connects to
the K3/P3, with SVGA I assume? I am new enough to the K3 to have never
heard of this.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
I would second the request to leave LINK in as well... Please!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Hi,
I ordered and use the 400 for RTTY, I suspect the 250 is a bit to
narrow.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Will Elecraft be offering a trade in program for the old Synth
boards? :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Ha! Finally talked my friend into a K3... It should be at his home
today, or tomorrow! ;)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Hi,
I am also a bit hard of hearing... I had a hearing test, and asked for
a copy of the Frequency, vs amplitude graph. This shows me my best
frequency for being able to hear...
I then set the Zero beat to that frequency, and I was able to copy about
50% more than what I set by listening...
--
I wish the original post had not been trimmed... I missed it.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
:
as in both vfo A and B being programmed the same?
__
From: David Cole d...@nk7z.net
To: elecraft@mailman.qth.net
Sent: Saturday, January 24, 2015 10:33 PM
Subject: Re: [Elecraft] K3 Memory Question
You are more
You are more than likely using BANK A and programming Bank B, or
vice-verse, with both programed the same this can happen.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram
That would work for me... Just filter on the announce tag, and move the
rest to a discussion folder I can look at as needed...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram
Could we move this to the above topic please... I was enjoying the
filter discussion...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
I use the 8 pole Xtal filter, and love it for CW... You are in for such
a treat once you get your K3 going on CW... The rig is a wet dream for
CW ops.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
K4!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
Hi,
Not sure how many know this, but there is a way to preset your Filters
for Normalization...
See:
http://youtu.be/_1DnLQVaoYg
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for
Phil,
I had a hearing test done, and asked for the resultant data showing
frequency vs sensitivity...
I selected a spot where my ear was most sensitive in the 400 to 700 Hz
range, and then set the K3 zero beat to that frequency...
CW is a LOT better now! I had placed the zero beat at my
On Mon, 2015-01-05 at 11:06 -0500, Joe Subich, W4TV spewed forth with:
What you find as an unused frequency in the JT sub-band is *not*
necessarily unused - and you know it. What may appears to you to be
unused is someone listening to the 48 second transmission from another
station you can
OMG Joe! You are flat wrong here!
We all need to live together, this sort of thing is going to happen, so
get used to it. I have heard JTers lower than the allotted 2 KHZ they
have as a suggested frequency, and I don't consider them causing
intentional QRM, I consider them correctly using the
Hi Vic,
If I remember correctly, there was a discussion here a few months ago,
(which I can not locate in the archives for some reason), dealing with
this behavior... I think it had something to do with telling the K3 to
key down in two different ways... Something along the lines of using
PTT
Hi,
As an aside, I have the SVGA, and do CW a LOT, and have never seen this
either...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Hi,
I have a new K3, well, maybe 4 months old now... I noticed that the CW
Speed knob, and the Filter Width knob have become noticeably sloppy in
their mounting holes, as compared to the other knobs of the same type.
There is perhaps 1/8 inch of play at the end of both knobs. This is as
when they are rotated.
If the encoders are turned quite fast, it is possible that the firmware
cycles cannot keep up with that speed. A bad encoder will appear
erratic rather then slow responding.
73,
Don W3FPR
On 12/18/2014 10:32 PM, David Cole wrote:
Hi,
I have a new K3, well
Hi,
I used to use a Rigblaster on my old Icom, I got the K3, and after
asking was told no need... I reluctantly connected everything, and it
works just fine with out an interface... No hum, everything works very
well... I have no wires coming out the front of the rig, nor to I have
to rewire
Hi,
No matter what happens, you will probably end up taking the antenna
down... If nothing else to check to be sure it is fine...
Grab an analyzer and connect it as close to the antenna base as
possible, and see if it is resonant on all bands... Probably won't
anymore. If you are lucky, it is
or running RTTY -- I was calling CQ on 40M running about 1200W.
Other bands are unchanged but 30 and 40M are gone.
Thanks to everyone that responded.
On 15 Dec 2014 15:07, David Cole wrote:
Hi,
No matter what happens, you will probably end up taking the antenna
down... If nothing else
cost engineering
Jim you are a gentlemen...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV
Hi,
Thanks, and no need, to apologize, sometimes mail lists make it
difficult to communicate... The addition of a single word can change
the meaning of things... No offense taken.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Hi,
I can't deal with the Mac question, but the CW question I can...
There are two memories for keying either voice, or CW. They are called
Bank 1 and Bank 2. You toggle which memory you want by pressing and
holding the REC button. This button is in the center of the memory
select button
Ouch... Good thought! Back to the computer for me.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for
Will hardware need to be purchased, or is it already in place on the
rigs?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
whether additional P3 option boards will be necessary or not.
73,
Don W3FPR
On 12/9/2014 8:12 PM, David Cole wrote:
Will hardware need to be purchased, or is it already in place on the
rigs?
__
Elecraft mailing list
Home: http
You know it's not that obvious to me. If I have to study the manual,
or look at the back of the rig, it is not obvious...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram
There is an interesting discussion going on in the HAMLIB Developers
group about Elecraft serial ports.
See: https://lists.sourceforge.net/lists/listinfo/hamlib-developer
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Bad example Bill... If your car had a software update, chances are it
would be available...
I can wait on a P3 update... I would rather see K3 updates...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Hi,
I disagree, but I am not insane about it... :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for
I would like to second that! If I had to pick a single mod I wanted,
that would be it for today...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
I agree totally, skip the manual key, it's 2014, and you own a really
hot radio, skip the 1890 technology, and get a paddle... Best is a
Vibroplex...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
Found in this thread:
I can't use a straight key any more for more than 20 minutes without a
lot of pain.
Yes, get a straight key, there is a great reason for one
Start out with a Paddle... I wish I had...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
You will find that your DX increases a lot if you use CW! :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Along this same line... I just checked, and I am showing only 4.86
available, just did the get software from Elecraft thing, and I don't
see 4.93???
Is there another way of getting software updates for teh rig?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
Hi,
I have a K3, and I swear I used to just tap the foot switch, which
closes the PTT line, and the CW ID's memory which was in repeat would
stop repeating... Now it seems to not do that anymore... PTT still
works fine, in voice modes...
Is there a way to set the K3 up for this type of
and your Elecraft was built where? ;)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
Hello,
I have a K3, and a P3. I have both, and a question regarding S meter
readings on each.
Using the P3, in peak hold mode, I see the highest peak at S6, while at
the same time I see a steady S8 to S9 on the K3 itself.
I assume that the two ought to match, or at least be close... Is this
Anyone have an XG-3 they are willing to sell? If so, please write off
list.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Thank you Alan!!!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Mon, 2014-11-17 at 07:57 -0800, Phil Wheeler wrote:
What antenna will you be using, David?
Phil W7OX
On 11/17/14 6:14 AM, David Cole wrote:
Hi all,
I am considering
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Mon, 2014-11-17 at 10:28 -0800, Jim Brown wrote:
On Mon,11/17/2014 6:14 AM, David Cole wrote:
Hi all,
I am considering the Elecraft
Hi all,
I am considering the Elecraft KAT500K tuner for my station... I run
around 1K to 1.5K for SSB, and 500 to 750 for RTTY/Digital.
Is this pushing the Elecraft too far?
I am looking at an LDG AT-1000 PROII, and the Elecraft KAT500K right now
as the two possible candidates. Palstar would
Used to get a repeat of my audio I recorded when I held down M1, through
M4. If I do it now, I see the word REPEAT, I hear one run of the
memory, and then nothing more... Any ideas? The little arrows feeding
each other disappears as well after one play.
--
Thanks and 73's,
For equipment, and
:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Sun, 2014-11-16 at 14:33 -0800, David Cole wrote:
Used to get a repeat of my audio I recorded when I held down M1, through
M4. If I do it now, I see the word REPEAT, I hear one run of the
memory, and then nothing more... Any ideas? The little
That was it... THANKS!!!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
For the next poor soul that tries to use MixW with a K3!
Problem:
I posted the problem outlined below to the MixW Yahoo group I manage,
after posting it here. This group correctly tagged the issue as a MixW
issue, which I was not sure I believed until K9JWI, Clyde solved this
problem as
Hi,
I use Vista for all the eyeball QSLs... Reasonable quality, and they
take an upload for the images. Very nice cards.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram
Hi Matt,
This isn't a sideband issue... It seems to be some issue with teh
software, not the radio... The radio is keeping in the correct
sideband, I see it 100% of the time with FLDigi... More as I get into
it.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
BTW Ken, I forgot to thank you for the reply! THANK YOU!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
Hi Ken,
I am in CW mode... It acts exactly as you describe, but when in CW
mode, I never see the REV below CW, and I have checked, the rig stays in
CW mode...
There is some difference between this rig and the Pro III, and II...
This issue never happened using the Icom rigs. It strikes me that
For those interested, I have a review of that antenna at:
http://nk7z.net/mfj/
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Hi Ron,
I am not sure it is a serial problem, in fact I would probably bet money
that it is not... Here is something new to ponder about this that may
help you...
If I go to the CW is LSB option in MixW, and assert it, all behaves
fine, (both waterfall and signal track as I turn main tuning
Hi Rick,
I don't believe it would be so repeatable if it were a serial issue...
My problems are 100% repeatable...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information
Hi Mike,
Thanks for that input... I am unable to triage this to radio changes,
or MixW changes... You are correct about MixW. I run the MixW Yahoo
support group, and the author has been MIA for about three years now...
He did an update a gew years ago, then dropped off the map again...
Getting
your
digital mode software to match.
73,
Matt VK2RQ
On 5 Nov 2014, at 2:58 am, David Cole d...@nk7z.net wrote:
Hi Mike,
Thanks for that input... I am unable to triage this to radio changes,
or MixW changes... You are correct about MixW. I run the MixW Yahoo
support group
Hello all,
I have spent a few months trying to fathom this and finally have given
up and need your help...
When in CW mode, and running MixW the following is observed:
1. All bands below 18 MHz, if I move the tuning dial, the frequency
display of MixW moves as expected, and any signals stay
/groups/MM-SSTV/info
On Mon, 2014-11-03 at 18:53 -0800, David Cole wrote:
Hello all,
I have spent a few months trying to fathom this and finally have given
up and need your help...
When in CW mode, and running MixW the following is observed:
1. All bands below 18 MHz, if I move
-11-03 at 21:21 -0600, Michael Eberle wrote:
You may have to put it in CW-R mode to get on the opposite sideband.
Although I would think one would use digital soundcard programs in
DATA-A mode.
Sent from my U.S. Cellular® Smartphone
Original message
From: David
Nicely done! I thought I had a lot of ferrite's on my feed-line! :)
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Hi,
Looking at the tech spec sheet I don't see a power rating? Also
remember these are 75 ohm connectors... Anyone know what the max power
you can pump through one of these are?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
HI,
In a pileup, I ALWAYS move off zero beat, so if I transmit, I don't
cover the DX station in the event I transmit on top of him/her.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for
Why only tune the radio, and not use the Waterfall?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for
101 - 200 of 378 matches
Mail list logo