I need some help on the KRC2 I just built for use with my K3. I have the
auxbus connection set up and the KRC2 responds fine to the band settings
of the K3--turns on the relay drivers for each band and also the ACC
drivers follow the K3's KRC2 config menu settings. The KRC2 also passes
the
.
Try running in XP compatibility mode to see if that helps.
73,
Don W3FPR
On 9/4/2011 2:18 PM, Don Sandstrom wrote:
I need some help on the KRC2 I just built for use with my K3. I have the
auxbus connection set up and the KRC2 responds fine to the band settings
of the K3--turns on the relay
Currently when operating RTTY using FSK (data mode FSK D), RTTY monitor
audio is routed to line out--both left and right stereo channels. I am
routing main and sub receiver audio to two sound cards in a SO2V
configuration using N1MM Logger. The problem with routing monitor audio
to line out is
My unit was shipped on Thursday, November 15 and delivered
Monday. Serial number 0093. It is the kit version.
With only seven to go, I would bet they cleared out all of
the first 100 serial numbers last week. That is--assuming
they take them in order.
73 - Don, W7VXS
The power control of my K2/100--KAT100 combination is acting
up. This happened after a nearby lightning discharge (rare
in the Seattle area). Power output does not track the power
control setting very well. For example, with the lowest
high power setting of 11 Watts, I am getting about 20+
5 matches
Mail list logo