Having this issue with my KPA-1500. Goes into FAULT mode immediately after
going into Op mode. I have thoroughly seated all the cables. This unit is brand
new. See attached photo. Thoughts?
Thx/Ed NI6S
__
Elecraft mailing list
Me again. Still searching for a very specific knob. This is a solid black knob
with a non-spinning finger dimple. Heavy at 14 oz.
Have gotten offers but they don't seem to come through. Appreciated.
Ed NI6S
__
Elecraft mailing list
I have a knob I am trying to replace. This particular knob is heavy and does
NOT have a spinner. Solid black.
Have one to sell? Thanks.
Ed
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
What do you have?
Thanks,
Ed NI6S
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Wanted to add that I am referring to the Elecraft internal unit (K144XV).
Thanks.
> On 19 Aug 2020, at 6:56 AM, Edward wrote:
>
> Finding it hard to justify one of these for my K3. Any reason to get one
> before I say no, especially given that I have dedicated VHF gear?
>
> Thanks,
> Ed
Finding it hard to justify one of these for my K3. Any reason to get one before
I say no, especially given that I have dedicated VHF gear?
Thanks,
Ed NI6S
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
New update. The 12w drive limitation is now affecting the amp. Tuner is not
inline. The radio and amp are only connected with a cable between the key (K3)
and the PA (KPA500).Amp was fine yesterday and figured tuner was the issue.
Not the case now.
Can't key amp if over 12w.
All,
I tried to firmly seat all of the connectors. No change. I finally pulled
them out and only used the keying cable (RCA to RCA). No change. One thing I
noticed is that the KAT 500 was giving me Power and SWR reading, but no
amplification from the amplifier. And if I had any more than
I have the combo K3S/KAT500/KPA500 with all of the optional interconnection
cables.
I am not able to key the amp though it was working earlier. The asterisk does
not appear in the display.
I went through the menu and everything is set accordingly. The inhibit is
disabled.
Any help would
y iPhone
> ...nr4c. bill
>
>
>> On May 13, 2020, at 1:01 PM, Edward via Elecraft
>> wrote:
>>
>> Figured out the problem. Pilot error. Pls disregard.
>>
>>>> On 13 May 2020, at 6:55 PM, Edward wrote:
>>>
>>&g
Figured out the problem. Pilot error. Pls disregard.
> On 13 May 2020, at 6:55 PM, Edward wrote:
>
>
>>
>> I am getting low audio output on my K3S. I have the AF setting on high.
>> This is happening with both the internal speaker and an external speaker.
>> Any solutions?
>
> 73,
> Ed
> I am getting low audio output on my K3S. I have the AF setting on high. This
> is happening with both the internal speaker and an external speaker. Any
> solutions?
73,
Ed NI6S
__
Elecraft mailing list
Home:
Is anybody using the KPOD and if so, seeing it’s benefit?
73,
Ed NI6S
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
13 matches
Mail list logo