[Elecraft] Elecraft K1 for sale

Before I place on QTH, I am offering it here. Elecraft K1, backlight display, 4 band module, 40/30/20/15 Autotuner kg9hfr...@gmail.com -73- FrankKG9H ARRL Life Member kg9hfr...@gmail.com __ Elecraft mailing list Home:

Re: [Elecraft] K2 MODULE WANTED

I may have one, will advise later today. I have several of K2 boards, etc. -73- FrankKG9H kg9hfr...@gmail.com > On Jun 17, 2023, at 11:52 AM, W3AB/GEO wrote: > > Hi all, > > I'm still looking for a KNB2 K2 Noise Blanker module, built or kit. > > Anything out there? > > --- > 73 de

Re: [Elecraft] Looking FOR K2 KNB2 AND KAT2 From WD4X.

I may have one here -73- FrankKG9H kg9hfr...@gmail.com > On Apr 8, 2023, at 1:34 PM, Ramon Batista wrote: > > Looking For Elecraft KNB2 And KAT2, Used Or New. > > Thank You, 73's From WD4X 239-227-9414. > __ > Elecraft mailing

[Elecraft] K2 accessories for sale

Folks I have a few excess board for sale KDSP2 KAF2 KNB2 KAT2 K160RX KBT2 KIO2 Only off line responses, please -73- FrankKG9H kg9hfr...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] K3 s/n 2324 ZERO Power Output after repair

I would avoid the transmitter calibration I would look for something that is completely out Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H Electronic Instrument Associates - Central, Inc. ...since 1971 w

Re: [Elecraft] KXPA100 70 to 80w out Max with KX3 drive at 15W???

891 needs a 23Amp minimum supply per the manual. 20 amps wont do it. -73- FrankKG9H kg9hfr...@gmail.com > On Oct 18, 2022, at 1:57 PM, Kyle Krieg wrote: > > I don't have anything that would draw 20A's, but I do have an FT-891 and I > think the power supply is good. > > FT-891 puts out

Re: [Elecraft] Elecraft repair

Someone mentioned last week that they sent in their K3 and got a 1 week turnaround. Elecraft has answered all my questions and called me back with some additional questions I had with a one day turn-around on the emails and calls. (Thanks Doug and Wayne) -73- FrankKG9H kg9hfr...@gmail.com

Re: [Elecraft] The Most Interesting Ham in the World [New KX2 Ad]

Sounds like a Jimmy Buffett song Wayne Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H Electronic Instrument Associates - Central, Inc. ...since 1971 w: www.electronicinstrument.com d/l our linecard at http

Re: [Elecraft] Have a K-2 SN 01049

Just paid $850 for mine SSB AF cables mic and just aligned etc by Dave in Michigan Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H Electronic Instrument Associates - Central, Inc. ...since 1971 w

Re: [Elecraft] For Sale: Elecraft KRX3A Sub-receiver with General Coverage option

Sorry, disregard -73- FrankKG9H kg9hfr...@gmail.com > On May 25, 2022, at 12:31 PM, Doug Hensley wrote: > > For Sale is my KRX3A Sub-receiver with the General Coverage option. > > If you look on pages 9-12 in the KRX3A manual, you will see what would have > come with a KRX3A; >

Re: [Elecraft] PayPal holding payment

And they are listening just got this. We’ve got you covered with all the details: Beginning January 1, 2022, the IRS implemented new reporting guidelines for individuals receiving goods and services payments on PayPal and other platforms totaling $600 or more per year. So what exactly does this

Re: [Elecraft] PayPal holding payment. (Follow up)

And don't be surprised when you get a 1099 from PayPal! -73- FrankKG9H kg9hfr...@gmail.com > On May 7, 2022, at 10:23 PM, David Deelstra wrote: > > After a rabbit hole trip through PayPal's endless loop "customer service" > pages, I stumbled on a page that asked what help I needed. I

Re: [Elecraft] OT: KWM-380

Exline, Jim Warner also does perfect work on them. He has the exact Collins tune-up fixtures! (641) 856-7772‬ j...@exlinesignal.com I have no financial ties to Exline. -73- FrankKG9H kg9hfr...@gmail.com > On Apr 3, 2022, at 9:53 AM, James F. Boehner, MD via Elecraft > wrote: > >

Re: [Elecraft] [K2] Report on cheap power supply

I was under the impression that we set the K2 for 3.5Amps under the initialization, so maybe a 4amp supply like the one made by Pro Audio Engineering?? -73- FrankKG9H kg9hfr...@gmail.com > On Dec 28, 2021, at 11:06 AM, jerry wrote: > > All, > > Ebay is crawling with Netgear wall

Re: [Elecraft] HELP! XFINITY SHUT OFF INTERNET DUE TO HAM ANTENNAS

Cameras? Any ID card from him? Intolerable from any company, let alone your provider. -73- FrankKG9H kg9hfr...@gmail.com > On Oct 20, 2021, at 1:21 PM, eric norris via Elecraft > wrote: > > Dear Gang: > Xfinity, our internet provider, showed up at 7:30am this morning, to explain >

[Elecraft] K2, KPA100

A while back someone asked me if I had an extra KPA100. I do now. (of course it works, hi hi.) Contact me off-list please -73- FrankKG9H kg9hfr...@gmail.com __ Elecraft mailing list Home:

Re: [Elecraft] K2 RF Output

; > On 8/8/2021 1:54 PM, Frank Krozel wrote: >> Just power the radio, not the PA >> -73- FrankKG9H >> kg9hfr...@gmail.com <mailto:kg9hfr...@gmail.com> >> >> >> >> >>> On Aug 8, 2021, at 12:16 PM, jerry mailto:je...@tr2.com>&g

Re: [Elecraft] K2 RF Output

Just power the radio, not the PA -73- FrankKG9H kg9hfr...@gmail.com > On Aug 8, 2021, at 12:16 PM, jerry wrote: > > All, > > Can I just remove the KPA100 and test the K2 "bare" for current draw? > > - Jerry KF6VB > > > On 2021-08-08 09:49, Don Wilhelm wrote: >>

Re: [Elecraft] K2 Buyers remorse

While editing, tap DISPLAY to change the KPA100 fan mode: x FAN nor is the normal setting; the fan stays off until needed x FAN LoHi keeps the fan at low speed, going to high if needed x FAN Hi keeps the fan at high-speed at all times in QRO mode -73- FrankKG9H kg9hfr...@gmail.com > On

Re: [Elecraft] Chasing paddles around desk top

And there goes my secret -73- FrankKG9H kg9hfr...@gmail.com > On Jul 8, 2021, at 2:34 PM, Art Nienhouse wrote: > > Gwen > Try this trick dust off the desk top ...wet fingers wipe the rubber feet with > wet fingers (spit) works place the paddle down it will stick its self to the >

[Elecraft] K2 Main Tuning knob spinner?

I ended up with a few K2’s and one main tuning knob “lost” the button/finger piece that helps to fast tune it. Seems it was “sticking on” with adhesive. Anyone know a source for these buttons? -73- FrankKG9H kg9hfr...@gmail.com

Re: [Elecraft] SSB Confirmed

I also agree on the KPA100. One box solution! -73- FrankKG9H kg9hfr...@gmail.com > On Jul 2, 2021, at 8:07 AM, Bill Coleman wrote: > > Go with the KPA100. It’s designed and integrated with the K2. Anything else > is going to be a maybe-fit or have problems. > > Plus you get the

Re: [Elecraft] K2 / ESD / Diodes D16 7 D17 replaced

Don as usual “Thank you” Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H Electronic Instrument Associates - Central, Inc. ...since 1971 w: www.electronicinstrument.com d/l our linecard at http

[Elecraft] K2 / ESD / Diodes D16 7 D17 replaced

Folks after Field day with another manufacturer’s radio, I have a new to me K2/100 coming in two days to use as my “small” contest radio. Short story, after using another QRP radio for an hour, I placed a K2/10 in its slot. Contacts flowed for the next three hours and my headache went away!

Re: [Elecraft] XG1 crystal?

t; K4HES > > Sent from my iPhone > >> On May 19, 2021, at 3:39 PM, Frank Krozel wrote: >> >> Anyone know where I can get a new 7.040 Crystal for my XG1? >> -73- FrankKG9H >> kg9hfr...@gmail.com >> >> >> >> >> _

[Elecraft] XG1 crystal?

Anyone know where I can get a new 7.040 Crystal for my XG1? -73- FrankKG9H kg9hfr...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] Sherwood Engineering: Receiver comparison update!

HERE! it is http://nc0b.com/table.html -73- FrankKG9H kg9hfr...@gmail.com > On May 5, 2021, at 8:27 AM, Bill Steffey NY9H wrote: > > looks like he is working on his "" Receiver Performance page > > On 5/5/2021 8:42 AM, Mike Cox wrote: >> Check for his information.

Re: [Elecraft] Sherwood Engineering

Seems he is moving pages over to this site from the old site. The pointer shows the other site. -73- FrankKG9H kg9hfr...@gmail.com > On May 5, 2021, at 8:27 AM, Bill Steffey NY9H wrote: > > looks like he is working on his "" Receiver Performance page > > On 5/5/2021 8:42 AM, Mike Cox

Re: [Elecraft] Need a tuning knob for K2

Front Panel board. > > 73, > Don W3FPR > > > On 4/25/2021 10:34 AM, Frank Krozel wrote: >> Thanks Don, will check today. >> >> I also need to figure out which K2 need those small 3/8”x3/8” rubber spacers >> in-between the PC boards without taki

Re: [Elecraft] Need a tuning knob for K2

the new encoder. > Order the new knob from Elecraft - they no longer have the older knob. > With the new knob, you need 3 fiber washers stacked. > > 73, > Don W3FPR > > On 4/25/2021 9:00 AM, Frank Krozel wrote: >> I am looking for a tuning knob for a K2 SN 5630 >

[Elecraft] Need a tuning knob for K2

I am looking for a tuning knob for a K2 SN 5630 If I recall there were two different sizes of shafts, this would be the second (maybe current) size. This is SN -73- FrankKG9H kg9hfr...@gmail.com __ Elecraft mailing list Home:

Re: [Elecraft] K3 power indication

Did you check to see if the PA option is selected? -73- FrankKG9H kg9hfr...@gmail.com > On Mar 25, 2021, at 8:32 AM, Tom Fitzpatrick via Elecraft > wrote: > > All of a sudden when I crank the power knob it only goes up to 12.5. > However it is still putting out 80/90 Watts??? >

Re: [Elecraft] Why is my K3 off frequency?

Maybe I am missing the point. While you may be off by 12Hz, not sure if I would feel that I want to participate in this Net if you are called out for that. When I was brought into 6 meters I was told this was the Gentlemen's band. Most all the nets I participate in are within 100Hz at best.

Re: [Elecraft] Copying CW and Pitch

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

Re: [Elecraft] K2 LCD Screen Issue

A very cool QRZ page there Mark! -73- FrankKG9H kg9hfr...@gmail.com > On Feb 7, 2021, at 1:28 PM, Mark Yergin wrote: > > Thanks Don and Joel, who both suggested bad solder joints. I touched up > all the LCD and U1 solder joints on the Front Panel and the problem was > resolved! > >

[Elecraft] K2 - K60XV 60 Meter Module for sale

I was talking to Dave a few minutes ago and he indicated that someone here was looking for the 60 meter / Transverter module for a K2. I have a working one. e-mail me tonight your offer shipped. Off-line please. -73- FrankKG9H kg9hfr...@gmail.com

[Elecraft] K2: KDSP2 - Reset

Is there an easy way to reset the KDSP-2 for the K2? -73- FrankKG9H kg9hfr...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] Elecraft parts (clean-out)

Been sorting through my stock, decided to sell as one-lot, pictures off line. K3, Bezels, 3 K3 Filters (pulls, non-Elecraft), 1.8kHz, 400Hz, 400Hz K3, Elecraft 6kHz, AM filter K3, synthesizer #1 K3, synthesizer #2 K3, KPF3 KX3 KXPD3 Spring and contact upgrade KX3-2M, 2 meter module I can use a

Re: [Elecraft] New boxes and packing for Elecraft equipment

Curious if the original shipping boxes seems to work when the radio is sent out, why re-invent the box? -73- FrankKG9H kg9hfr...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] Who purchased my KX3

I found the end plates! Send me my last email and I will send to you. -73- FrankKG9H kg9hfr...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] MH4 Mic on a K2?

It is a front panel resistor that needs to be added if.. I recall. -73- FrankKG9H kg9hfr...@gmail.com > On Jun 12, 2020, at 9:00 AM, hawley, charles j jr > wrote: > > The Elecraft manual says the condenser type MH4 mic is acceptable for use on > the K2, but I don't see any bias for

Re: [Elecraft] Establishing A New Station

Hmm not a a permanent situation but I tried for years now to put up a small antenna, end fed whip etc when at my condo. I ended up with an AlexLoop and never looked back. Best contact was on 20 meters, 2,000 miles on 2 watts, SSB on 17 meters. -73- FrankKG9H kg9hfr...@gmail.com > On

Re: [Elecraft] KX3 will not power up

Is the ribbon connected inside? -73- FrankKG9H kg9hfr...@gmail.com > On May 11, 2020, at 7:13 AM, a4...@sy-edm.com wrote: > > Dear Elecraft brain trust, > My KX3 seems to have an > issue. It will not "boot up". The power on key

Re: [Elecraft] K3S poor CW keying further investigation

I agree with Bob, TAX. if it doesn't have the connectors you need, then don't buy it. The message is pretty clear if one has the needed connectors for that power level and the other doesn’t. One sits on the shelf of the vendor, the other one flys off the shelf. -73- FrankKG9H

Re: [Elecraft] K2 Year

1999? -73- FrankKG9H kg9hfr...@gmail.com > On Apr 20, 2020, at 12:18 PM, Aaron wrote: > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post:

[Elecraft] K3 For Sale

Offering my extra K3 for sale. Auto-tuner Sub Receiver Filters in main receiver are 2.7kHz, 0.5kHz, 0.2kHz Filters in Sub receiver are 2.7kHz, 0.5kHz, 0.2kHz (Elecraft supplied) Config file for this specific K3 included! Manual, microphone, power cord, box $2,000 Off-line inquires

[Elecraft] K3/100/2 filters for sale

I have two that are pretty much identical. K3/100W/Auto-tuner/2 optional filters Receiver 1: 2.7/500/200 Receiver 2: 2.7/500/200 SN 4xxx Receiver 1: 2.7/500/250 Receiver 2: 2.7 SN7xxx Power cords, manuals on each included. Both look the same, no issues. $2,100 for either, off line

[Elecraft] 2 meter internal module

So I sold my KX3 (sigh) and anticipate some time over the holidays to open up my K3 radios, adding filters, etc. A while ago, I purchased what I was told was the internal 2 meter module for the K3. Lo and behold I find out that I did not receive the K144XV for the K3 but received the KX3-2M

Re: [Elecraft] Battery pack not powering K2

Mine is missing the battery, I was told it is a Powersonic PS-1229 for my K2 Is that true? -73- FrankKG9H kg9hfr...@gmail.com > On Nov 10, 2019, at 8:22 AM, hawley, charles j jr > wrote: > > I had my first battery last about 5 years until it wouldn't turn on the > radio. It started

[Elecraft] KX3 for sale

Not using it enough. KX3 KX3 160-6 M Transceiver KXAT3 Internal automatic antenna tuner KXBC3 Internal NiMH Charger/Clock KXFL3 KXFL3 Dual-Passband Roofing Filter KXPD3 KXPD3 Precision Keyer Paddle MH3 MH3 Hand Microphone KXUSBa USB Cable Power Cable Sidekick end panels Cable to

[Elecraft] Letting go of one of my K3 radios

Thinning out a little bit. K3/10 with 2.8kHz filter, excellent condition. With manual and power cord. Extra box with a 1.8kHz and 400Hz filters (non-Elecraft) not installed for you to install. Works perfect $975 shipped -73- FrankKG9H kg9hfr...@gmail.com

[Elecraft] K-POD needed

Guess I missed the last one, if you have an extra K-POD, please contact me - offline kg9h at ARRL dot net -73- FrankKG9H kg9hfr...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] [Way (OT)] Pedantic comment about metric usage

Walter, When I went to Michigan Tech University, I once did an hour’s worth of calculations and got an answer but assigned the incorrect designator like you just pointed out. I got 0-credit for the work. Lesson learned. De Frank KG9H > On Jul 30, 2019, at 11:11 AM, Walter Underwood wrote:

Re: [Elecraft] KX3 remote a K3

Jim can I contact you offline? Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H Electronic Instrument Associates - Central, Inc. ...since 1971 w: www.electronicinstrument.com d/l our linecard at http

[Elecraft] KX3 remote a K3

I’m not sure if this is ever been asked before but can a KX3 remotely control a K3? Off-line responses please de Frank KG9H Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H Electronic Instrument Associates - Central

Re: [Elecraft] K3S AGC action in CW

How was it resolved? Frank > On Jul 19, 2019, at 11:46 AM, Roger wrote: > > Please ignore - problem solved! > > 73/Roger - DL5RBW > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft >

Re: [Elecraft] Am settings?

other program material, etc. and not to > listen to themselves. Unless they have a giant ego. } > > If you should ask on the air about your AM audio and EQ within an AM group, > you'll receive as many comments as there are stations on the frequency plus 1. > > 73 > > B

[Elecraft] Am settings?

So let me start out by saying I am a CW guy but listen to the AM guys on the weekends. Reminds me of when I just got into ham radio back in 1968. They guys were on 1805 here in Chicago area. I have not yet bought the 13kHz filter so I am strapped with what I have in it now, stock. Can anyone

Re: [Elecraft] OT a bit: K3 Ant Tuner

I have a plain K3 that I bypass the built-in tuner on 80 all the time. On 20 and 40 it is in-line all the time. de Frank KG9H > On Jul 5, 2019, at 4:42 PM, Jack Brindle via Elecraft > wrote: > > Good observation, George. The KAT3A indeed does have a bypass relay, while > the KAT3 (in the

Re: [Elecraft] CW decode speed?

OK figured it out. After decoding signals (first step) then select TEXT DEC (0) then use “B” to select WPM CHK. Pretty cool. de Frank KG9H > On Jun 24, 2019, at 6:35 AM, Frank Krozel wrote: > > Looking for the instructions on how to indicate the speed of a received > stat

[Elecraft] CW decode speed?

Looking for the instructions on how to indicate the speed of a received station on my K3. Looked in the K3 manual but cannot find the speed indicator. anyone? de Frank KG9H __ Elecraft mailing list Home:

[Elecraft] Will swap my K1

Looks like lots of folks are looking for a K1. I have one that I would offer up but would like to get a K2 in return. (Can never have enough K2’s..) Mine is a 4 bander, 7, 10, 14, 18MHz, with Autotuner. Email to kg9hfr...@gmail.com

[Elecraft] MFJ-1234?

is needed. Also (yep the big one) is ON/OFF capability. I think Howard is adding this capability shortly. I was thinking also that I would use an old dow key and power it off when not needed to ground the antenna connector for K3. Then power it on to connect the antenna when in use. Sincerely, Frank

[Elecraft] RigPi / MFJ1234

This reflector has been quiet on the RigPi / MFJ-1234. Has anyone tried this on the K3/ with RS-232? de Frank KG9H __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] MFJ1234

ey and it came back POWER ON FAILED TRY AGAIN. That may be I >> don’t have something set correctly. So Far all of the function keys have >> worked. >> >> >> From: Frank Krozel >> Sent: Monday, May 27, 2019 11:52 AM >> To: lmarion >> Cc: Elecraft Ref

Re: [Elecraft] MFJ1234

Curious, does this also turn the radio on and off on either of those? Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H Electronic Instrument Associates - Central, Inc. ...since 1971 w: www.electronicinstrument.com d/l

Re: [Elecraft] To improve customer service

Don, sorry to hear that you have had a bad experience with Elecraft. Since I built K2-90X, I have had many conversations with the folks at Elecraft. Don has helped me with the many K2’s I have had over the years (10?) and now realize that I should keep the one that is here now, a K2/100 that Don

[Elecraft] Alternate refletor for Collins?

Folks this group has many eyes and ears out with amazing resources. I am looking for a similar reflector for a Collins KWM-380. Once I have this up and running I will probably trade for a K3S, etc but in the meantime, does anyone know of the resource link (Google-Io, etc) for the KWM-380?

[Elecraft] KE7X, Fred Cady, silent key

Sorry to hear about Fred, a great guy helping us along with the Elecraft radios. de Frank KG9H __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] K3 accessories (looking for)

Looking for the following for my K3 KBPF3 KFL3B KFLA-1.0K de KG9H __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

Re: [Elecraft] Elecraft K4?

It IS on the Elecraft site https://elecraft.com/products/k4-transceiver?fbclid=IwAR1ZvSRipjGHXFT4CeD5iYhFDj89Oa7ZYJ-1rV5u83e9UYHFdg9TDsceMbE Frank KG9H > On May 16, 2019, at 12:54 PM, David Box wrote: > > I googled Lutz electronics and did a translate of their web site. If this is > a hoax

Re: [Elecraft] K3S Audio buzz on transmit, especially AM

Try switching to a linear supply? Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H Electronic Instrument Associates - Central, Inc. ...since 1971 w: www.electronicinstrument.com d/l our linecard at http

Re: [Elecraft] Of words and such

I would be floored and would take a blank paper and a good pen. De KG9H > On Apr 26, 2019, at 12:08 PM, Andy Durbin wrote: > > " When an owner of the company calls to assist, that is beyond the pale. " > > I wonder if that is what you really thought. > >

Re: [Elecraft] Filters for K3

OK thank you everyone fo your input Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H Electronic Instrument Associates - Central, Inc. ...since 1971 w: www.electronicinstrument.com d/l our linecard at http

[Elecraft] Filters for K3

On weekends here in the Midwest there are many AM nets (as well as the normal 3.880 Nets) that I like to listen to. I am curious as a CW guy, I would like to not take away from my already compliment of filters, 500, 200Hz to put in 6 and 13kHz filters, thinking of adding just the 13kHz filter.

Re: [Elecraft] K3 missing 6kHz filter - all ok?

OK thank you very much I don’t need any more responses I think that my thoughts were verified everybody have a good day Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H Electronic Instrument Associates - Central, Inc

[Elecraft] K3 missing 6kHz filter - all ok?

So I purchased a used K3, it arrives in a few hours. Trying to get smart before I unbox, I recall the past user removing the 6kHz filter and leaving in the 2.7, 500 and 250kHz filters in place. Somewhere tonight I recall reading that all the filters need to be in descending order. The fact that

[Elecraft] Odd request

So I have been using my K1 for a few weeks now, radio seems v-e-r-y close to sound of my K2. I am done with it and want to move up to a K3, anyone? It is a 4 band K1 with the autotunes built-in. Lighted readout. de KG9H Offline responses to KG9H at ARRL dot net

[Elecraft] Vibroplex Code Warrior JR

Not sure who had the modification for the Vibroplex Code Warrior JR posted but THANKS! I removed the screws holding the paddles in place and replaced them with brass screws and washers (I used nuts as the hardware store did not have brass washers) and I now like the paddle. I also used some

[Elecraft] KNB-1 wanted

Just curious if anyone has a KNB-1 (Noise Blanker for K1) laying around. I can use one for my K1. de Frank KG9H __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] K1 forward and reverse power indicator

he SWR at the input of the > ATU. > > See the KAT1 manual page 11 for full display capability. > Or just trust that the ATU will do its job. The SWR is displayed briefly at > the end of a TUNE cycle. > > 73, > Don W3FPR > > On 3/26/2019 8:38 AM, Frank Krozel wrot

[Elecraft] K1 forward and reverse power indicator

So getting used to my new to me K1. I am lucky to have the ATU internally (and am looking for the NB board!) but have a question for the folks that have one of these. How do you see your reverse power in the field? Do you use an external SWR meter? is there a way to get some LEDs out that can

Re: [Elecraft] K2 to the field

Always protect the front! de KG9H > On Mar 21, 2019, at 12:23 PM, Bryan Nehl wrote: > > I'm thinking about taking my K2/10 out for POTA/SOTA ops which involve some > hiking.Mine has the extra heavy duty extended side panels. I'll be taking a > fiberglass pole, microphone, paddle, headphones

[Elecraft] New K1 user

So I dropped by a friend’s place today to buy my old K2/100 back. (now I have an extra K2 with most options…. LOL) and I snagged a K1. Never owned one in the past. Just need to pick up the noise blanker and the internal battery tray, etc. Curious has anyone ever tried the “just 9V battery”

[Elecraft] Elecraft XG-1 Manual?

Anyone have a pdf for the ELECRAFT XG-1? de KG9H __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] Blinking KX3?

So it has been a million years since I opened up my KX3. Today (stranded in the UP of Michigan) I took the trusty KX3 out and am getting ready to operate. Inside the left hole that uses a screw to hold in the paddle, there is a “blinking yellow light”. Never saw that before is that normal? de

[Elecraft] Long wire - portable operation KX3 with tuner

Skimmed through the manual but did not find the reference to length of random wire (in a tree for example) and the trailing wire. I found 20’ and 13’ respectively in the manual but thought there was some “other” reference for 30’ and something for the trailing wire. Anyone? de KG9H

Re: [Elecraft] K2 display

K1, it was an option that was developed some time after the K1 was > announced. > > 73, > Don W3FPR > > On 6/30/2018 12:15 PM, Frank Krozel wrote: >> Trying to recall (I have had some 10 K2’s) were there any that were

[Elecraft] K2 display

Trying to recall (I have had some 10 K2’s) were there any that were produced without backlighting? de KG9H __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] CW sending

I had rotator cuff and bicep surgery and did learn cw with my left hand. While not as proficient as my right it did get me by. I used the same “assignments” as the right hand has. Worked out well. de KG9H > On Mar 19, 2018, at 1:41 PM, greenacres...@charter.net wrote: > > > > I'm a

Re: [Elecraft] Want My K-2 Back

Sending in my top cover! Frank KG9H > On Feb 25, 2018, at 1:42 PM, wrote: > > What a deal! > > 73 Jeff kb2m > > -Original Message- From: Wayne Burdick > Sent: Sunday, February 25, 2018 2:32 PM > To: kb2mj...@att.net > Cc: rich hurd WC3T ; James

[Elecraft] K2 Illumination?

? If this will allow me to show you .. here they are.. http://electronicinstrument.com/k2disp.jpg http://electronicinstrument.com/k2disp.jpg (Yeah, bored.. ) KG9H Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com mailto:fr...@electronicinstrument.com

Re: [Elecraft] Portable antenna for KX3

My personal preference is the Alex Loop. I have tried wires, etc and from my deck on a lawn chair or on the 7th floor of a condo in Indian Shores, Florida...… 59 on most contacts. Best on 10 meters but works ok as well on 40. Frank KG9H On Mar 9, 2015, at 8:22 PM, Lynn W. Taylor, WB6UUT

Re: [Elecraft] (K3) Alexloop Antenna

The Alexloop is a very good antenna. Keep your power under 20 watts. I have used it with a KX3, a 703 and an 857 turned to 20 watts. Amazing antenna. I have tried it on a lawn chair… on a balcony and got amazing results. Keep in mind that every time you transmit, remember to retune before though.

Re: [Elecraft] KX3: Hi SWR on 20m 30m after KX3-2M install

Brian, Can’t help wondering if ESD or similar build-up occurred with low humidity in the winter. Frank KG9H On Jan 28, 2015, at 3:26 PM, Brian Waterworth brian.waterwo...@gmail.com wrote: I had a similar situation with my KX3 just after the RTTY round-up at the beginning of January. I

Re: [Elecraft] K3 Sub Receiver and protecting the Sub RX input

Folks, Have we lost track of our senses? (I never vent so please allow me to do so..) I like to “trade a lot and see many radios that have a blown out front end, which usually I can fix. Most times the victim radio was “on receive” with a shiny new transmitter that was “just being set in

Re: [Elecraft] [K2] Looking for a UK based expert to debug KSB2

If I recall there are two jumpers that you needed to add. Frank KG9H On Jan 24, 2015, at 11:57 AM, Gareth - M5KVK m5...@m5kvk.org wrote: OK, I have to admit defeat. I can't see what's wrong with the KSB2 board I built for my K2. I need somebody with more skill than I to take a look. I'd

[Elecraft] Anyone want a Flex 1500 for your KX3?

I have a Flex 1500 with full MARS mod and the optional knob. Looking for anther KX3.. Frank KG9H __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] KXPA100 Loosing Communications/ Turns PA Mode Off

Just a thought… Not using a KXPA but do use my radio remotely.. I run my remote control radio with HRD for the past 5 years.. I run the radio at 4800 with the thought that any issues might not affect the communications path to the radio from the computer. Never… had a drop-out. Frank KG9H

[Elecraft] K2 Serial 906 returns...

OK, got to share with you folks a new one for me. Many of you know that I love to trade radios. Someday.. I may even trade off s/n 5702, which is a K2/100 but.. not just yet for that much wanted KX3... Today, I got an opportunity to purchase another K2. I was told that the guy worked for

  1   2   >