, absolutely no change to the audio input compared to the other
bands, and 4 bars of ALC showing.
Back to the drawing board?
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.g4ilo.com/blog.html G4ILO's
Bloghttp://www.g4ilo.com/kcomm.html KComm for Elecraft
reason at all to have EQ in DATA A mode, which might at
least save a bit of work and memory for storing the settings. However I
suppose there will now be a flurry of emails from people who use DATA A for
some weird purpose where EQ could be useful. :)
-
Julian, G4ILO. K2 #392 K3 #222.
http
of the
firmware were perfectly capable of doing this. Why am I being treated as if
I am demanding the impossible for simply asking for something that can be
done and has been done.
I really am very, very fed up with the K3 at this point in time.
-
Julian, G4ILO. K2 #392 K3 #222.
http
on automatically when
you select CW.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.g4ilo.com/blog.html G4ILO's
Bloghttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-CW-Output-on-Tune%2C
. Followed by the Transmitter Gain procedure on each band.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.g4ilo.com/blog.html G4ILO's
Bloghttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com
. If there is an option for it, I can't find one.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.g4ilo.com/blog.html G4ILO's
Bloghttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/Elecraft-70cm
Toby Deinhardt wrote:
Panadapters? KPA800 KPA1500? Something completely different?
Oh why did you have to mention this...
Oh, please! It would be nice to have the K3 working properly with all
features implemented first.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com
the archives you may find the answer you want without
having to wait for a reply.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http
comes up on the display and who
don't like wearing them all the time. :)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http
--td2268444.html#a2269043 .
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-Output-power-difference---more
Lyle Johnson wrote:
Note that TxEQ is in effect in FM mode. You may have set it up for
optimum SSB punch in conjunction with CMP. The best settings for FM may
be different.
Please can we have per-mode EQ settings (and no EQ for DATA)?
-
Julian, G4ILO. K2 #392 K3 #222.
http
the red LED is hard wired to some transmit
supply voltage, which would make the idea impractical anyway.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View
in parallel.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/Specific-firmware-for-blind-special-needs
for it. There are lots of stupid things one can do with a radio, one
cannot expect it to prevent all of them. It is really the responsibility of
anyone using a radio for the first time to learn how to drive it.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham
and often show poorer readings than
actual because the SNR is not good enough. Looking at the trace on your
screenshot I would have said your IMD was better than -23dB.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp
TX TEST for what it was originally intended would be
rather irritating.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http
that
the rig is not actually transmitting when the PTT or key is pressed.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http
, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/Firmware---Programming-command-request-tp2278694p2280119.html
Sent
!
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/CW-Keyboards-tp2274724p2275796.html
Sent from the Elecraft mailing
and make sure the software is using the same value. And if you've
tried connecting at the wrong speed you need to turn the K3 off and on
again, because sometimes it goes into a sulk and won't communicate at all
after you have done this.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com
you, I would recommend spending a bit of time typing on one
before making a decision.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message
accept my
apologies and please point me to the right page. 73, Eric WD6DBM
No, you just have to disable the alternate display.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm
.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/Firmware-bug--tp2268444p2269043.html
Sent from
change the options
to no email at all, and then read and post through Nabble, a web based
interface. ( http://n2.nabble.com/Elecraft-f365791.html ).
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com
Stewart Baker wrote:
Is it me, or is the Elecraft site very slow to load.
It's you, or possibly your computer. :) It's as quick as anything here.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp
me.
Not everyone has an accurate power meter.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/PEP
can do to it in Notepad, so this is
really not a good idea.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2
. This has been
the case ever since the firmware was split between the front panel and the
main MCU. So, depending on the extent of the delay, this may be normal.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com
for mine, just connected the
radio to a PSU adjusted to 14.2V.
Julian, G4ILO
G4ILO's Shack: www.g4ilo.com
2009/2/1 KBG Luxford kbgluxf...@fastmail.fm:
I put a battery into one of the K2s that I assembled. I would not do it
again for the reason that, as far as I am aware, these batteries
Don - K2PMC wrote:
I would also like to comment on the response from Julian, G4ILO where he
stated..
I think your concerns might be allayed if Elecraft were to do what a
couple of developer types who I have had discussions with privately have
suggested, namely publish a roadmap
before I go batty?
Thanks,
Julius
Wanted to put the second Rx in, but with this weirdness, I'm holding off.
Have you tried a complete reload, either of the same firmware or the
previous version you were using?
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http
condition, but it holds at 11.8V on receive for
longer than I could be bothered waiting.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message
.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-problems-tp2253876p229.html
Sent from
-specific
equalization on the K3.)
Yes, that would really be nice (including disabling equalization for data
modes.)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft
means (several minutes
to Save or Restore).
And all computers have an undo function that works in any application. It's
called a backup.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html
the matching option in the K3 PTT menu.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/Re%3A-K3%2C-Mixw%2C
, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-and-PSK-tp2236491p2244011.html
Sent from the Elecraft mailing list
for firmware development. Then we could all see
when the K3 is actually going to be finished, when our long-awaited
feature is likely to be implemented, and people would have to justify why
their pet idea should come higher up the list than something else.
-
Julian, G4ILO. K2 #392 K3 #222.
http
it works in CW and SSB modes. For me, the amount of input needed to
do this is some way below the point at which ANY ALC blobs appear.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm
waterfall would show you
all you wanted to see. If it covered any wider then stations operating close
together would be hard to tell apart.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html
the firmware updater can do that, but it isn't
possible to do that and get other info from the radio at the same time,
which a logging program needs to do.)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com
looked at the schematic since it isn't something I
personally wish to tinker with.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context
switched off at the mains when not in
use.
The supply cable for the K3 certainly uses less copper than the ones
supplied with JA radios. The PowerPole connectors seem a bit wimpy to me as
well.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com
, the output power should follow the POWER
control fairly accurately. Do not run more than 40W unless you have some
means of monitoring the signal to be sure it is not excessively wide and
causing interference to other PSK users.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack
a Diamond GSV3000 PSU and the standard weedy K3 power cable, cropped
down to the shortest length possible to get from A to B, no more than a
couple of feet.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com
of a
matching K3 power supply being offered some time back, so perhaps this could
be one of its options.
It's be quicker than waiting for a K4.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html
in the waterfall to a sweet spot that you specify. Fldigi doesn't support
JT65A, though.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context
Lyle Johnson wrote:
However, K3 Utility has a terminal function which can be used for RTTY
(and PSK31 as well as CW) if you have a computer attached to your K3.
My program KComm can also send PSK31 and RTTY (and CW) from the keyboard
using the same method.
-
Julian, G4ILO. K2
I see that a new review of the K3 has appeared on Eham.net which will no
doubt raise the hackles of the paid-up members of the Elecraft fan club, and
cause nods of agreement from many others.
http://www.eham.net/reviews/detail/6673
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com
in a contest
or big gun DX station, I would have thought that transmitter specifications
of comparable excellence to the receiver were also essential.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com
be, the output is
certainly not going to be any better.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/6
a dummy load when testing the TX. The IMD Meter is designed to
be used off-air (hence when TXing into an antenna) but it would appear that
other factors can affect the readings. This needs further investigation.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http
set,
but some programs seem happier with a different input level than others.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context
, KW,
YE,
K3, KX1, etc., Official list needed, OT=other). No points if neither is
Elecraft.
Somebody make up some rules and set a date.
What should those outside the USA send for State? Tired? Inebriated? Hung
over?
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack
, but it is still a digital mode, and if the fact that it
can be sent and received using a computer makes more people use the mode, I
don't think that's a bad thing.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp
,
but no-one has taken on the task of finishing it.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K2-Digital
at adequate level to drive a
sound card. I can dig out the schematic if anyone wants to know the exact
take-off point but the details can probably be found by searching the
archives.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directory
on and use the filtering to exclude other signals that
would affect the AGC to the detriment of the one I am trying to copy.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2
level project.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/HRD-cw-copy-tp2195214p2198992.html
Sent
to 100W peak just
because you've set 100W on the dial. So to be on the safe side - especially
if you don't have a separate IMD meter to monitor your signal - I'd
recommend aiming for no more than 50W peak, which should show about 20W
average on a modulated PSK signal.
-
Julian, G4ILO. K2 #392 K3
to setting the power control to 40W and
believing that's what I was getting.
Exceed 100W though, and it rapidly becomes awful.
It would still be a good idea to have some form of IMD monitoring in place
if you are going to try higher power levels, though.
-
Julian, G4ILO. K2 #392 K3 #222.
http
Julian, G4ILO wrote:
Actually, as I said, it's quite acceptable at 100W peak, which I have run
on several occasions inadvertently due to setting the power control to 40W
and believing that's what I was getting.
I must apologize and correct the above statement since I was thinking about
of toroids to wind for the add-ons
for the K2 as well (KAT2, etc.)?
There's a photo of them all on the Elecraft website:
http://www.elecraft.com/K2_toroids.htm . Don't think there is one for the
add-ins, though.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http
. However the K3 appears to behave as I
would expect in SSB mode. So I am not convinced that I am expecting the
impossible.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2
a CQ you can instantly click on them and
call them. More than anything this is the time when you want your TX to be
putting out full power.
I agree, what you suggest is a workaround to the problem, but it would be
better if the workaround was not necessary.
-
Julian, G4ILO. K2 #392 K3 #222
transmissions
always started at whatever power had been set.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-pwr
. The K3 carries out a gain calibration when tuning is done at that exact
power level, but it assumes when doing this that the load is a perfect 50
ohms. If it isn't, the calibration could be incorrect. If you tune at 6W (or
even 5.1W) you should avoid this.
-
Julian, G4ILO. K2 #392 K3 #222.
http
.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-pwr-out-on-digimodes-tp2163956p2167473.html
Sent from
to that
functionality then I think everyone would be happy. I know I would. (It
would actually be nice if DATA A disabled RX EQ and TX EQ as well.)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com
PSK31 signal of all,
typically -33 or -34dB at 5W output. The K3 at 5W on 80m measured -28 or
-29dB whether using DATA A mode (with no 'real' ALC being applied) or SSB
mode with one or two bars of real ALC.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham
to the center of the passband sweet spot
before hitting TX in order to get maximum power out.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message
there are some, because if I have learned nothing
else from my participation in ham forums like this, it is that some people
actually like doing things the hard way.)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp
is just SSB. Its only purpose is to facilitate selection of a
different input source, disabling compression, and disabling passband
equalization. Nobody expects it to behave in any other respect differently
from how it handles SSB.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's
to set the power. I have given up using my K3 until this
problem is fixed, as it's too easy to forget this and overdrive the PA with
dire results.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html
page of the site.
We both thank Elecraft for their support.
I hope she doesn't get too much spam from having the email address in clear
on the page like that.
The URL with the pictures is a real gobbledygook one, so I've made a short
version of it: http://xaddr.com/5kq .
-
Julian, G4ILO
Don Wilhelm-4 wrote:
$3.99 per month at 1and1 Internet - www.1and1.com.
$3.95 a month at HawkHost - www.hawkhost.com. That's where g4ilo.com and
ham-directory.com are hosted.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
.
So using a third party library that has been well and truly tried and tested
is probably a wise decision.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
the automatic transition time,
from the default four seconds, to perhaps half that time.
sorry if the answer was posted previously; I searched but couldn't find.
73 de Mark
Send ..-- which is the prosign IM.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack
to shorten the length of the default
idle time, except by terminating it manually. The timeout period is probably
hard coded in the firmware.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm
is not grounded to the case as well as it should
be?
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/Six-meter
are saving. You could send FT;FA;FB; as one string and then sort the results
out afterwards.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View
suggestion and had trouble
getting it working with their K3s (Frank, did you ever succeed?)
I think the setup side of things could do with a wizard or something. Of
course I realize Fldigi was originally written for Linux whose users
*expect* things to be difficult! :)
-
Julian, G4ILO. K2 #392
, and twice what it would be in SSB mode. What's
more, it's twice what the K3 firmware expects it to be, with the result that
if you set the power control to 10W it will try to produce 20W with the PA
switched out.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http
to ensure that they never exceed a given peak power
because the K3 internal circuits are incapable of doing so is a very serious
criticism indeed.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html
originally work like that in early
versions of the firmware.
Sorry to continue the topic after Wayne requested we call a halt on it, but
the assertion made by Joe opens up a whole new can of worms if he is indeed
correct about it.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack
with the instructions.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3%3A-Still-unable-to-set-power-correctly-in%2C
, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K2-filter-center-frequency-shift-with-band--tp2110237p2110775.html
, the K3 is still not capable
of performing a simple basic function like regulating the output power to
the level the operator requests. I am seriously considering selling the K3
at this point, as I am losing confidence that Elecraft has any intention of
fixing this issue.
-
Julian, G4ILO. K2 #392
private mail suggests that certain people aren't happy with
the repeatability of the SSB level control either.)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
exactly the
same phenomenon using my KK7UQ IMD meter. However it is blatantly obvious
that the K3 is putting out too much power when this occurs, because its own
power meter shows this.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
by the power supply either.
This would make a very nice, small, portable power supply for a QRP K2 or
any of the other QRP Elecraft radios, that you could use from a hotel room
or whatever with an indoor antenna.
With best wishes for a happy 2009.
-
Julian, G4ILO. K2 #392 K3 #222.
http
by the power supply either.
This would make a very nice, small, portable power supply for a QRP K2 or
any of the other QRP Elecraft radios, that you could use from a hotel room
or whatever with an indoor antenna.
With best wishes for a happy 2009.
-
Julian, G4ILO. K2 #392 K3 #222.
http
.
Just as some folks obsess over receiver performance specs, others like to
feel that their frequency readout is spot on. As with many things in this
hobby, whether or not it is really necessary to know your frequency to that
level of accuracy is irrelevant. :)
-
Julian, G4ILO. K2 #392 K3 #222
for it to be
more than a party piece. Perhaps others have been more successful.
As Christmas is almost here, may I end this posting by wishing everyone, but
especially the Elecraft team, a very merry holiday season.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http
, I'm not at all sure that it could handle 10W key down
for 10 minutes, but I'm not going to try to find out the hard way.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft
overload I only need the line out
level set to about 4. The problem is worse for those who use laptops because
most new laptops appear not to have a line input at all, only a microphone
input which of course is a lot more sensitive and requires even less signal
from the K3.
-
Julian, G4ILO. K2 #392
might show some benefits. It is
probably also useful on 6m.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com
, and if it is looking into a mismatched (or
varying, as you adjust the ATU) load then it mucks up the calibration.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View
to work.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/Who-is-using-CW-to-PSK31-with-K3
DaveL G3TJP wrote:
G4ILO said:
Given that web hosting is available for well under a tenner in the UK from
reputable hosts like 1+1, I don't know why someone would penny-pinch to
the extent of using a dodgy free web host for their business site.
Ah, I would have been disappointed
501 - 600 of 1395 matches
Mail list logo
