Re: [Elecraft] KX3 #3933 Alive and kicking!

Thanks Steve! I guess that my QTH on 70.25 degrees North, makes mine the northernmost residental KX3, hi! 73! Hans / LA2MOA 2013/4/12 ke6...@gmail.com Congratulations! And welcome to the group! 73, Steve KE6GDA Sent from Windows Mail *From:* Hans Østnell *Sent:* April 11, 2013 2

[Elecraft] KX3 #3933 VFO encoder noise

Hi group! Just noticed that the VFO encoder in my KX3 is generating noise on a couple of bands when tuning, On 10 MHz a just a little, on 14 MHz a little bit more, a bit worse on 18 and 21 MHz, and even more on 24 and 28 MHz. Nothing on 50 MHz and nothing below 10 MHz. Is this normal, or does

[Elecraft] KX3 #3933 Alive and kicking!

Hi group! About 30 minutes ago I was finished with assembling my KX3 #3933 with KXFL3 and KXAT3! The rig works perfect, and WOW that receiver! Just listening with about 25 feet of wire though the living room, hihi. Up here in the Arctic we still have 5 feet of snow and no possibilities to do

Re: [Elecraft] Your Opinion: The realities of QRP vs. QRO

The world is too small for QRO... Hans / LA2MOA QRP-ARCI #11898 2009/3/5 Steve Ellington n...@carolina.rr.com Obviously a troll. Steve Ellington n...@carolina.rr.com - Original Message - From: dw bw...@fastmail.fm To: Elecraft_List elecraft@mailman.qth.net Sent: Thursday, March

Re: [Elecraft] K2 deaf on 40 m

Svend, Chack the bandpass filters. Especially check the capasitor values in the BP-filters. I bet that you will find the soultion of your problem there. 73! Hans / LA2MOA 2009/2/21 Svend Spanget span...@privat.dk Hi all. My K2 is working fine on 160m, 80m, 30m and 20m but not 40m. I have

[Elecraft] RE: Help! K2 display problem

Jack, I had exactly the same problem in the last K2 I built. Obvioulsy they got a batch with shortlegged diffusers at Elecraft, hi! However it's pretty easy to overcome this problem. My method is similar to the J-hook method by WB7SS. I attached the spacers to the diffuser (the leads completely

[Elecraft] K2: Strange behaviour during alignment and tests (part II)

Hi group! I have just finished the alignments and tests (part II) in my (second) K2-project. Sofar all resistance checks are ok, and the results of the alignment and tests have also been ok. Except for one thing: I think that the AGC in the radio behaves rather strangely. It's pretty nervous in